aboutsummaryrefslogtreecommitdiff
path: root/hw/sd
AgeCommit message (Collapse)Author
2018-06-08sdcard: Disable CMD19/CMD23 for Spec v2Philippe Mathieu-Daudé
These commands got introduced by Spec v3 (see 0c3fb03f7ec and 4481bbc79d2). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Disable SEND_IF_COND (CMD8) for Spec v1Philippe Mathieu-Daudé
CMD8 is "Reserved" in Spec v1.10. Spec v2.00 introduces the SEND_IF_COND command: 6.4.1 Power Up CMD8 is newly added in the Physical Layer Specification Version 2.00 to support multiple voltage ranges and used to check whether the card supports supplied voltage. The version 2.00 or later host shall issue CMD8 and verify voltage before card initialization. The host that does not support CMD8 shall supply high voltage range. Message-Id: 201204252110.20873.paul@codesourcery.com Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-5-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Add a 'spec_version' property, default to Spec v2.00Philippe Mathieu-Daudé
As of this commit, the Spec v1 is not working, and all controllers expect the cards to be conformant to Spec v2. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Allow commands valid in SPI modePhilippe Mathieu-Daudé
From the "Physical Layer Simplified Specification Version 1.10" Chapter 7.3 "SPI Mode Transaction Packets" Table 57: "Commands and arguments" Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Update the Configuration Register (SCR) to Spec Version 1.10Philippe Mathieu-Daudé
The initial implementation is based on the Specs v1.10 (see a1bb27b1e98). However the SCR is anouncing the card being v1.01. The new chapters added in version 1.10 are: 4.3.10 Switch function command Switch function command (CMD6) 1 is used to switch or expand memory card functions. [...] This is a new feature, introduced in SD physical Layer Specification Version 1.10. Therefore, cards that are compatible with earlier versions of the spec do not support it. The host shall check the "SD_SPEC" field in the SCR register to recognize what version of the spec the card complies with before using CMD6. It is mandatory for SD memory card of Ver1.10 to support CMD6. 4.3.11 High-Speed mode (25MB/sec interface speed) Though the Rev 1.01 SD memory card supports up to 12.5MB/sec interface speed, the speed of 25MB/sec is necessary to support increasing performance needs of the host and because of memory size which continues to grow. To achieve 25MB/sec interface speed, clock rate is increased to 50MHz and CLK/CMD/DAT signal timing and circuit conditions are reconsidered and changed from Physical Layer Specification Version 1.01. 4.3.12 Command system (This chapter is newly added in version 1.10) SD commands CMD34-37, CMD50, CMD57 are reserved for SD command system expansion via the switch command. [These commands] will be considered as illegal commands (as defined in revision 1.01 of the SD physical layer specification). The SWITCH_FUNCTION is implemented since the first commit, a1bb27b1e98. The 25MB/sec High-Speed mode was already updated in d7ecb867529. The current implementation does not implements CMD34-37, CMD50 and CMD57, thus these commands already return ILLEGAL. With this patch, the SCR register now matches the description of the header: * SD Memory Card emulation as defined in the "SD Memory Card Physical * layer specification, Version 1.10." Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180607180641.874-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08hw/sd/milkymist-memcard: Add trailing '\n' to qemu_log() callPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606152128.449-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01sd: fix up includeMichael S. Tsirkin
include files shouldn't have the "include/" part, that is implied. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01hw: Do not include "sysemu/blockdev.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. Code change produced with: $ git grep '#include "sysemu/blockdev.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(BlockInterfaceType|DriveInfo|drive_get|blk_legacy_dinfo|blockdev_mark_auto_del)" | \ xargs sed -i.bak '/#include "sysemu\/blockdev.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-15-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-15sdcard: Correct CRC16 offset in sd_function_switch()Philippe Mathieu-Daudé
Per the Physical Layer Simplified Spec. "4.3.10.4 Switch Function Status": The block length is predefined to 512 bits and "4.10.2 SD Status": The SD Status contains status bits that are related to the SD Memory Card proprietary features and may be used for future application-specific usage. The size of the SD Status is one data block of 512 bit. The content of this register is transmitted to the Host over the DAT bus along with a 16-bit CRC. Thus the 16-bit CRC goes at offset 64. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180509060104.4458-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-10hw/sd/bcm2835_sdhost: Don't raise spurious interruptsPeter Maydell
The Linux bcm2835_sdhost driver doesn't work on QEMU, because our model raises spurious data interrupts. Our function bcm2835_sdhost_fifo_run() will flag an interrupt any time it is called with s->datacnt == 0, even if the host hasn't actually issued a data read or write command yet. This means that the driver gets a spurious data interrupt as soon as it enables IRQs and then does something else that causes us to call the fifo_run routine, like writing to SDHCFG, and before it does the write to SDCMD to issue the read. The driver's IRQ handler then spins forever complaining that there's no data and the SD controller isn't in a state where there's going to be any data: [ 41.040738] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000 [ 41.042059] sdhost-bcm2835 3f202000.mmc: fsm 1, hsts 00000000 (continues forever). Move the interrupt flag setting to more plausible places: * for BUSY, raise this as soon as a BUSYWAIT command has executed * for DATA, raise this when the FIFO has any space free (for a write) or any data in it (for a read) * for BLOCK, raise this when the data count is 0 and we've actually done some reading or writing This is pure guesswork since the documentation for this hardware is not public, but it is sufficient to get the Linux bcm2835_sdhost driver to work. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180319161556.16446-3-peter.maydell@linaro.org
2018-04-10hw/sd/bcm2835_sdhost: Add tracepointsPeter Maydell
Add some tracepoints to the bcm2835_sdhost driver, to assist debugging. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180319161556.16446-2-peter.maydell@linaro.org
2018-03-23sdhci: fix incorrect use of Error *Paolo Bonzini
Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077). local_err was unused, and this made the static analyzer unhappy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180320151355.25854-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-12hw: Do not include "sysemu/block-backend.h" if it is not necessaryThomas Huth
After reviewing a patch from Philippe that removes block-backend.h from hw/lm32/milkymist.c, I noticed that this header is included unnecessarily in a lot of other files, too. Remove those unneeded includes to speed up the compilation process a little bit. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1518684912-31637-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-09sdhci: Fix a typo in commentPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180309153654.13518-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09sdcard: Add the Tuning Command (CMD19)Philippe Mathieu-Daudé
From the "Physical Layer Simplified Specification Version 3.01": A known data block ("Tuning block") can be used to tune sampling point for tuning required hosts. [...] This procedure gives the system optimal timing for each specific host and card combination and compensates for static delays in the timing budget including process, voltage and different PCB loads and skews. [...] Data block, carried by DAT[3:0], contains a pattern for tuning sampling position to receive data on the CMD and DAT[3:0] line. [based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180309153654.13518-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09sdcard: Display which protocol is used when tracing (SD or SPI)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180309153654.13518-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09sdcard: Display command name when tracing CMD/ACMDPhilippe Mathieu-Daudé
The SDBus will reuse these functions, so we put them in a new source file. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180309153654.13518-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: slight wordsmithing of comments, added note that string returned does not need to be freed] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-09sdcard: Do not trace CMD55, except when we already expect an ACMDPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180309153654.13518-2-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify SD_SEND_OP_COND (ACMD41)Philippe Mathieu-Daudé
replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-17-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify SEND_IF_COND (CMD8)Philippe Mathieu-Daudé
replace switch(single case) -> if() Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-16-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: warn if host uses an incorrect address for APP CMD (CMD55)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: check the card is in correct state for APP CMD (CMD55)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-14-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handles more commands in SPI modePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-13-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use a more descriptive label 'unimplemented_spi_cmd'Philippe Mathieu-Daudé
Suggested-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handle the Security Specification commandsPhilippe Mathieu-Daudé
returning sd_illegal, since they are not implemented. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-11-f4bug@amsat.org [PMM: tweak multiline comment format] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: handle CMD54 (SDIO)Philippe Mathieu-Daudé
Linux uses it to poll the bus before polling for a card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the registerfields API for the CARD_STATUS register masksPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-9-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the correct masked OCR in the R3 replyPhilippe Mathieu-Daudé
use the registerfields API to access the OCR register Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: simplify using the ldst APIPhilippe Mathieu-Daudé
the code is easier to review/refactor. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-7-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: remove commands from unsupported old MMC specificationPhilippe Mathieu-Daudé
This device does not model MMCA Specification previous to v4.2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: clean the SCR register and add few commentsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: fix the 'maximum data transfer rate' to 25MHzPhilippe Mathieu-Daudé
To comply with Spec v1.10 (and 2.00, 3.01): . TRAN_SPEED for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-4-f4bug@amsat.org [PMM: fixed comment indent] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: update the CSD CRC register regardless the CSD structure versionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: Don't always set the high capacity bitPhilippe Mathieu-Daudé
Don't set the high capacity bit by default as it will be set if required in the sd_set_csd() function. [based on a patch from Alistair Francis <alistair.francis@xilinx.com> and Peter Ogden <ogden@xilinx.com> from qemu/xilinx tag xilinx-v2015.4] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215221325.7611-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the registerfields API to access the OCR registerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use G_BYTE from cutilsPhilippe Mathieu-Daudé
code is now easier to read. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: define SDMMC_CMD_MAX instead of using the magic '64'Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: add more trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-6-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: replace fprintf() by qemu_hexdump()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: add a trace event for command responsesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180215220540.6556-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: replace DPRINTF() by trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: reorder SDState struct membersPhilippe Mathieu-Daudé
place card registers first, this will ease further code movements. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the busPhilippe Mathieu-Daudé
On reset the bus will reset the card, we can now drop the device_reset() call. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180216022933.10945-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22hw/sd/milkymist-memcard: expose a SDBus and connect the SDCard to itPhilippe Mathieu-Daudé
using the sdbus_*() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22hw/sd/milkymist-memcard: split realize() out of SysBusDevice init()Philippe Mathieu-Daudé
Create the SDCard in the realize() function. Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22hw/sd/milkymist-memcard: use qemu_log_mask()Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Michael Walle <michael@walle.cc> Message-id: 20180216022933.10945-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13sdhci: add Spec v4.2 register definitionsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180208164818.7961-31-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-05 12:34:06 +0000