aboutsummaryrefslogtreecommitdiff
path: root/hw/scsi/trace-events
AgeCommit message (Collapse)Author
2023-05-30virtio-scsi: implement BlockDevOps->drained_begin()Stefan Hajnoczi
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI bus. Those SCSI devices typically have a BlockBackend. When the BlockBackend enters a drained section, the SCSI device must temporarily stop submitting new I/O requests. Implement this behavior by temporarily stopping virtio-scsi virtqueue processing when one of the SCSI devices enters a drained section. The new scsi_device_drained_begin() API allows scsi-disk to message the virtio-scsi HBA. scsi_device_drained_begin() uses a drain counter so that multiple SCSI devices can have overlapping drained sections. The HBA only sees one pair of .drained_begin/end() calls. After this commit, virtio-scsi no longer depends on hw/virtio's ioeventfd aio_set_event_notifier(is_external=true). This commit is a step towards removing the aio_disable_external() API. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230516190238.8401-19-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-07-13scsi-disk: allow MODE SELECT block descriptor to set the block sizeMark Cave-Ayland
The MODE SELECT command can contain an optional block descriptor that can be used to set the device block size. If the block descriptor is present then update the block size on the SCSI device accordingly. This allows CDROMs to be used with A/UX which requires a CDROM drive which is capable of switching from a 2048 byte sector size to a 512 byte sector size. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220622105314.802852-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for MacintoshMark Cave-Ayland
When A/UX configures the CDROM device it sends a truncated MODE SELECT request for page 1 (MODE_PAGE_R_W_ERROR) which is only 6 bytes in length rather than 10. This seems to be due to bug in Apple's code which calculates the CDB message length incorrectly. The work at [1] suggests that this truncated request is accepted on real hardware whereas in QEMU it generates an INVALID_PARAM_LEN sense code which causes A/UX to get stuck in a loop retrying the command in an attempt to succeed. Alter the mode page request length check so that truncated requests are allowed if the SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk is enabled, whilst also adding a trace event to enable the condition to be detected. [1] https://68kmla.org/bb/index.php?threads/scsi2sd-project-anyone-interested.29040/page-7#post-316444 Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220622105314.802852-10-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13scsi-disk: add FORMAT UNIT commandMark Cave-Ayland
When initialising a drive ready to install MacOS, Apple HD SC Setup first attempts to format the drive. Add a simple FORMAT UNIT command which simply returns success to allow the format to succeed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220622105314.802852-9-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-24hw: Fix misleading hexadecimal formatPhilippe Mathieu-Daudé
"0x%u" format is very misleading, replace by "0x%x". Found running: $ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/ Inspired-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-12-30hw/scsi/megasas: Use uint32_t for reply queue head/tail valuesPhilippe Mathieu-Daudé
While the reply queue values fit in 16-bit, they are accessed as 32-bit: 661: s->reply_queue_head = ldl_le_pci_dma(pcid, s->producer_pa); 662: s->reply_queue_head %= MEGASAS_MAX_FRAMES; 663: s->reply_queue_tail = ldl_le_pci_dma(pcid, s->consumer_pa); 664: s->reply_queue_tail %= MEGASAS_MAX_FRAMES; Having: 41:#define MEGASAS_MAX_FRAMES 2048 /* Firmware limit at 65535 */ In order to update the ld/st*_pci_dma() API to pass the address of the value to access, it is simpler to have the head/tail declared as 32-bit values. Replace the uint16_t by uint32_t, wasting 4 bytes in the MegasasState structure. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211223115554.3155328-20-philmd@redhat.com>
2021-06-15esp: store lun coming from the MESSAGE OUT phasePaolo Bonzini
The LUN is selected with an IDENTIFY message, and persists until the next message out phase. Instead of passing it to do_busid_cmd, store it in ESPState. Because do_cmd can simply skip the message out phase if cmdfifo_cdb_offset is zero, it can now be used for the S without ATN cases as well. Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-07esp: add PDMA trace eventsMark Cave-Ayland
This will become more useful later when trying to debug mixed FIFO and PDMA requests. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210304221103.6369-8-mark.cave-ayland@ilande.co.uk>
2021-03-07esp: add trace event when receiving a TI commandMark Cave-Ayland
This enables us to determine whether the command being issued is for a DMA or a non-DMA transfer. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210304221103.6369-6-mark.cave-ayland@ilande.co.uk>
2021-02-25scsi: add tracing for SG_IO commandsHannes Reinecke
Add tracepoints for SG_IO commands to allow for debugging of SG_IO commands. Signed-off-by: Hannes Reinecke <hare@suse.de> Message-Id: <20201116183114.55703-4-hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-12virtio-scsi: trace eventsHannes Reinecke
Add trace events for virtio command and response tracing. Signed-off-by: Hannes Reinecke <hare@suse.de> Message-Id: <20201116183114.55703-2-hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-17hw/scsi/spapr_vscsi: Convert debug fprintf() to trace eventPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200305121253.19078-8-philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-09-18trace: Remove trailing newline in eventsPhilippe Mathieu-Daudé
While the tracing framework does not forbid trailing newline in events format string, using them lead to confuse output. It is the responsibility of the backend to properly end an event line. Some of our formats have trailing newlines, remove them. [Fixed typo in commit description reported by Eric Blake <eblake@redhat.com> --Stefan] Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190916095121.29506-2-philmd@redhat.com Message-Id: <20190916095121.29506-2-philmd@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-11lsi: use SCSI phase names instead of numbers in traceSven Schnelle
This makes trace logs much easier to read, especially for people who are not fluent in SCSI. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190305195519.24303-5-svens@stackframe.org>
2019-02-05scsi-generic: Convert from DPRINTF() macro to trace eventsLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181211163105.31834-3-lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05scsi-disk: Convert from DPRINTF() macro to trace eventsLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181211163105.31834-2-lvivier@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11scsi: esp: Defer command completion until previous interrupts have been handledGuenter Roeck
The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers to reflect a consistent state. However, it is possible that the registers can change after RSTAT was read, but before RINTR is read, when esp_command_complete() is called. Guest OS qemu -------- ---- [handle interrupt] Read RSTAT esp_command_complete() RSTAT = STAT_ST esp_dma_done() RSTAT |= STAT_TC RSEQ = 0 RINTR = INTR_BS Read RSEQ Read RINTR RINTR = 0 RSTAT &= ~STAT_TC RSEQ = SEQ_CD The guest OS would then try to handle INTR_BS combined with an old value of RSTAT. This sometimes resulted in lost events, spurious interrupts, guest OS confusion, and stalled SCSI operations. A typical guest error log (observed with various versions of Linux) looks as follows. scsi host1: Spurious irq, sreg=13. ... scsi host1: Aborting command [84531f10:2a] scsi host1: Current command [f882eea8:35] scsi host1: Queued command [84531f10:2a] scsi host1: Active command [f882eea8:35] scsi host1: Dumping command log scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c] scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c] ... Defer handling command completion until previous interrupts have been handled to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-02lsi53c895a: convert to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20180917053229.4853-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01trace-events: fix code style: print 0x before hex numbersVladimir Sementsov-Ogievskiy
The only exception are groups of numers separated by symbols '.', ' ', ':', '/', like 'ab.09.7d'. This patch is made by the following: > find . -name trace-events | xargs python script.py where script.py is the following python script: ========================= #!/usr/bin/env python import sys import re import fileinput rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)' rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')') rbad = re.compile('(?<!0x)' + rhex) files = sys.argv[1:] for fname in files: for line in fileinput.input(fname, inplace=True): arr = re.split(rgroup, line) for i in range(0, len(arr), 2): arr[i] = re.sub(rbad, '0x\g<0>', arr[i]) sys.stdout.write(''.join(arr)) ========================= Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-05spapr_vscsi: fix build error introduced by f19661c8Felipe Franciosi
A typo introduced in f19661c8 prevents qemu from building when configured with --enable-trace-backend=dtrace. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23spapr_vscsi: convert to trace framework instead of DPRINTFLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for hw/scsi/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/scsi/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-16-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 16:27:20 +0000