aboutsummaryrefslogtreecommitdiff
path: root/hw/scsi-defs.h
AgeCommit message (Collapse)Author
2011-11-18scsi: update list of commandsPaolo Bonzini
Add more commands and their names, and remove SEEK(6) which is obsolete. Instead, use SET_CAPACITY which is still in SSC. Tested-by: Thomas Schmitt <scdbackup@gmx.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28scsi-disk: add stubs for more MMC commandsPaolo Bonzini
This patch adds a few stub implementations for MMC commands to scsi-disk, to be filled in later in the series. It also adds to scsi-defs.h constants for commands implemented by ide/atapi.c, when missing. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi: move GESN definitions to scsi-defs.hPaolo Bonzini
As a complement to the previous patch, move definitions for GET EVENT STATUS NOTIFICATION from the two functions to scsi-defs.h. The NCR_* constants are just bit values corresponding to the ENC_* values, with no offsets even, so keep just one copy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28atapi/scsi: unify definitions for MMCPaolo Bonzini
The definitions in ide/internal.h are duplicates, since ATAPI commands actually come from SCSI. Use the ones in scsi-defs.h and move the missing ones there. Two exceptions: - MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry" page in scsi-disk.c. It is unused, so pick the latter. - GPCMD_* is left in ide/internal.h, at least for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-06scsi: refine constants for READ CAPACITY 16Paolo Bonzini
Rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to distinguish from the 12-byte CDB variant, and add a constant for the subcommand. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-12scsi: add support for unit attention conditionsPaolo Bonzini
Unit attention conditions override any sense data the device already has. Their signaling and clearing is handled entirely by the SCSIBus code, and they are completely transparent to the SCSIDevices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-12scsi: move handling of REPORT LUNS and invalid LUNs to common codePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-01scsi-disk: Remove 'drive_kind'Hannes Reinecke
Instead of using its own definitions scsi-disk should be using the device type of the parent device. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01scsi: Sanitize command definitionsHannes Reinecke
Sanitize SCSI command definitions. Add _10 suffix to READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG, WRITE_LONG, and WRITE_SAME. Add new command definitions for LOCATE_10, UNMAP, VARLENGTH_CDB, WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN, ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16, LOCATE_16, ERASE_16, WRITE_LONG_16, LOAD_UNLOAD, VERIFY_12. Remove invalid definition of WRITE_LONG_2. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01scsi: Remove REZERO_UNIT emulationHannes Reinecke
REZERO_UNIT command is obsolete. Remove support for it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01scsi: Remove references to SET_WINDOWHannes Reinecke
SET_WINDOW command is vendor-specific only. So we shouldn't try to emulate it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17scsi-disk: support WRITE SAME (16) with unmap bitChristoph Hellwig
Support discards via the WRITE SAME command with the unmap bit set, and tell the initiator about the support for it via the block limit and the new thin provisioning EVPD pages. Also fix the comment which incorrectly describedthe block limits EVPD page. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25scsi: Return SAM status codesHannes Reinecke
Traditionally, the linux stack is using SCSI status codes which are shifted by one as compared to those defined in SAM. A SCSI emulation should naturally return the SAM defined codes, not the linux ones. So to avoid any confusion this patch modifies the existing definitions to match those found in SAM and removes any (now obsolete) byte-shift from the returned status codes. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-22scsi-bus: Add MAINTENANCE_IN and MAINTENANCE_OUT SCSIRequest xfer and mode ↵Nicholas Bellinger
assignments This patch updates hw/scsi-bus.c to add MAINTENANCE_IN and MAINTENANCE_OUT case in scsi_req_length() for TYPE_ROM with MMC commands. It also adds the MAINTENANCE_OUT case in scsi_req_xfer_mode() to set SCSI_XFER_TO_DEV for outgoing write data. Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-03-07Update to a hopefully more future proof FSF addressBlue Swirl
See also 8167ee883931cb20c6264fc19d040ce2dc6ceaaa, 530e7615ce3c01882e582c84dc6304ab98a3d5c5 and fad6cb1a565bb73f83fc0e2654489457b489e436. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-03scsi: add read/write 16 commands.Gerd Hoffmann
Add READ_16 + friends to scsi-defs.h, scsi_command_name() and the request parsing helper functions. Use them in scsi-disk.c too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REPORT_LUNSGerd Hoffmann
Move REPORT_LUNS emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add REPORT_LUNS to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SERVICE_ACTION_INGerd Hoffmann
Move SERVICE_ACTION_IN emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add SERVICE_ACTION_IN to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: GET_CONFIGURATIONGerd Hoffmann
Move GET_CONFIGURATION emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add GET_CONFIGURATION to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi-defs.hGerd Hoffmann
Largely based on <scsi/scsi.h> from linux. Added into the tree so we can use the defines everywhere, not just in scsi-generic.c (which is linux-specific). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 04:27:22 +0000