aboutsummaryrefslogtreecommitdiff
path: root/hw/s390-virtio-bus.h
AgeCommit message (Collapse)Author
2012-05-21virtio-blk: define VirtIOBlkConfPaolo Bonzini
We will have to add another field to the virtio-blk configuration in the next patch. Avoid a proliferation of arguments to virtio_blk_init. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-01s390: reset avail and used index on rebootJens Freimann
reset the guest vring avail/used idx fields, otherwise it's possible that old values remain in memory which would cause a reboot to fail with a "Guest moved used index" message Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-04[S390] Add hotplug supportAlexander Graf
I just submitted a few patches that enable the s390 virtio bus to receive a hotplug add event. This patch implements the qemu side of it, so that new hotplug events can be submitted to the guest. Signed-off-by: Alexander Graf <agraf@suse.de> --- v1 -> v2: - make s390 virtio hoplug code emulate-capable
2011-07-05virtio-blk: Turn drive serial into a qdev propertyMarkus Armbruster
It needs to be a qdev property, because it belongs to the drive's guest part. Precedence: commit a0fef654 and 6ced55a5. Bonus: info qtree now shows the serial number. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-20s390x: keep hint on virtio managing sizeAlexander Graf
The s390x virtio bus keeps management information on virtio after the top of the guest's RAM. We need to be able to tell the guest the size of its RAM (without virtio stuff), but also be able to trap when the guest accesses RAM outside of its scope (including virtio stuff). So we need a variable telling us the size of the virtio stuff, so we can calculate the highest available RAM address from that. While at it, also increase the maximum number of virtio pages, so we play along well with more recent kernels that spawn a ridiculous number of virtio console adapters. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-04s390x: fix s390-virtio-serialAlexander Graf
Commit 6b331efb733a0f913ddc0b7762a1307dec304061 broke the s390 proxy version of virtio-serial by only taking its PCI brother into account. So let's adjust s390-virtio-serial the same way as its PCI counterpart, making it compile and work again. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-23Delete useless 'extern' qualifiers for functionsBlue Swirl
'extern' qualifier is useless for function declarations. Delete them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-26s390: compile fixesAlexander Graf
The s390 target doesn't compile out of the box anymore. This patch fixes all the obvious glitches that got introduced in the last few weeks. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-09-07virtio-net: Make tx_timer timeout configurableAlex Williamson
Add an option to make the TX mitigation timer adjustable as a device option. The 150us hard coded default used currently is reasonable, but may not be suitable for all workloads, this gives us a way to adjust it using a single binary. We can't support any random option though, so use the "x-" prefix to indicate this is a developer option. Usage: -device virtio-net-pci,x-txtimer=500000,... # .5ms timeout Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-09Implement virtio resetAlexander Graf
The guest may issue a RESET command for virtio. So far we didn't bother to implement it, but with my new bootloader we actually need it for Linux to get back to a safe state. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-10block: add topology qdev propertiesChristoph Hellwig
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-console: qdev conversion, new virtio-serial-busAmit Shah
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio: add features as qdev propertiesMichael S. Tsirkin
Add feature bits as properties to virtio. This makes it possible to e.g. define machine without indirect buffer support, which is required for 0.10 compatibility, or without hardware checksum support, which is required for 0.11 compatibility. Since default values for optional features are now set by qdev, get_features callback has been modified: it sets non-optional bits, and clears bits not supported by host. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-05Add S390x virtio machine busAlexander Graf
On S390x we don't want to go through the hassle of emulating real existing hardware, because we don't need to for running Linux. So let's instead implement a machine that is 100% based on VirtIO which we fortunately implement already. This patch implements the bus that is the groundwork for such an S390x virtio machine. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>