aboutsummaryrefslogtreecommitdiff
path: root/hw/s390-virtio-bus.c
AgeCommit message (Collapse)Author
2012-07-17virtio-blk: qdev properties for disk geometryMarkus Armbruster
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-18qbus: Make child devices linksAnthony Liguori
Make qbus children show up as link<> properties. There is no stable addressing for qbus children so we use an unstable naming convention. This is okay in QOM though because the composition name is expected to be what's stable. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-18qdev: Convert busses to QEMU Object ModelAnthony Liguori
This is far less interesting than it sounds. We simply add an Object to each BusState and then register the types appropriately. Most of the interesting refactoring will follow in the next patches. Since we're changing fundamental type names (BusInfo -> BusClass), it all needs to convert at once. Fortunately, not a lot of code is affected. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Made all new bus TypeInfos static const.] [AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated] Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-11s390-virtio: Let s390_cpu_addr2state() return S390CPUAndreas Färber
Convert ipi_states to S390CPU**. Needed for s390_cpu_restart() in handle_sigp(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-05-21virtio-blk: always enable VIRTIO_BLK_F_SCSIPaolo Bonzini
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse* SCSI requests, not *execute* them. You could run QEMU with scsi=on and a file-backed disk, and QEMU would fail all SCSI requests even though it advertises VIRTIO_BLK_F_SCSI. Because we need to do this to fix a migration compatibility problem related to how QEMU is invoked by management, we must do this unconditionally even on older machine types. This more or less assumes that no one ever invoked QEMU with scsi=off. Here is how testing goes: - old QEMU, scsi=on -> new QEMU, scsi=on - new QEMU, scsi=on -> old QEMU, scsi=on - old QEMU, scsi=off -> new QEMU, scsi=on - new QEMU, scsi=off -> old QEMU, scsi=on ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=off -> new QEMU, scsi=off ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=on -> new QEMU, scsi=off ok, bug fixed - new QEMU, scsi=on -> old QEMU, scsi=off doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off) - new QEMU, scsi=off -> old QEMU, scsi=off broken by the patch Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: define VirtIOBlkConfPaolo Bonzini
We will have to add another field to the virtio-blk configuration in the next patch. Avoid a proliferation of arguments to virtio_blk_init. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-01s390: reset avail and used index on rebootJens Freimann
reset the guest vring avail/used idx fields, otherwise it's possible that old values remain in memory which would cause a reboot to fail with a "Guest moved used index" message Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-01S390: reboot: reset device pages on rebootJens Freimann
This patch fixes reboot on s390 by resetting the device page on reboot. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-03-14s390x hw/: Don't use CPUStateAndreas Färber
Scripted conversion: for file in hw/s390-*.[hc]; do sed -i "s/CPUState/CPUS390XState/g" $file done Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-22virtio-scsi: Add virtio-scsi stub deviceStefan Hajnoczi
Add a useless virtio SCSI HBA device: qemu -device virtio-scsi-pci Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-06s390x: fix qom-ification fall-outAnthony Liguori
Tested-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: remove baked in notion of aliases (v2)Anthony Liguori
Limit them to the device_add functionality. Device aliases were a hack based on the fact that virtio was modeled the wrong way. The mechanism for aliasing is very limited in that only one alias can exist for any device. We have to support it for the purposes of compatibility but we only need to support it in device_add so restrict it to that piece of code. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - Use a table for aliases (Paolo)
2012-02-03qdev: kill off DeviceInfoAnthony Liguori
It is no longer used in the tree since everything is done natively through QEMU Object Model. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27virtio-s390: convert to QEMU Object ModelAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-04[S390] Add hotplug supportAlexander Graf
I just submitted a few patches that enable the s390 virtio bus to receive a hotplug add event. This patch implements the qemu side of it, so that new hotplug events can be submitted to the guest. Signed-off-by: Alexander Graf <agraf@suse.de> --- v1 -> v2: - make s390 virtio hoplug code emulate-capable
2011-11-28virtio: add and use virtio_set_featuresPaolo Bonzini
vdev->guest_features is not masking features that are not supported by the guest. Fix this by introducing a common wrapper to be used by all virtio bus implementations. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-28qdev: switch children device list to QTAILQPaolo Bonzini
SCSI buses will need to read the children list first-to-last. This requires using a QTAILQ, because hell breaks loose if you just try inserting at the tail (thus reversing the order of all existing visits from last-to-first to first-to-tail). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-12s390-virtio: use specific endian ld/st_physAlexander Graf
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-05virtio-blk: Turn drive serial into a qdev propertyMarkus Armbruster
It needs to be a qdev property, because it belongs to the drive's guest part. Precedence: commit a0fef654 and 6ced55a5. Bonus: info qtree now shows the serial number. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-20s390x: keep hint on virtio managing sizeAlexander Graf
The s390x virtio bus keeps management information on virtio after the top of the guest's RAM. We need to be able to tell the guest the size of its RAM (without virtio stuff), but also be able to trap when the guest accesses RAM outside of its scope (including virtio stuff). So we need a variable telling us the size of the virtio stuff, so we can calculate the highest available RAM address from that. While at it, also increase the maximum number of virtio pages, so we play along well with more recent kernels that spawn a ridiculous number of virtio console adapters. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-18s390x: Dispatch interrupts to KVM or the real CPUAlexander Graf
The KVM interrupt injection path is non-generic for now. So we need to push knowledge of how to inject a device interrupt using KVM into the actual device code. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-12Replace cpu_physical_memory_rw were possibleStefan Weil
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys improves readability and allows removing some type casts. lduw_phys and ldl_phys were not used because both require aligned addresses. Therefore it is not possible to simply replace existing calls by one of these functions. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-10s390x: fix virtio feature bitmapAlexander Graf
The feature bitmap in the s390 virtio machine is little endian. To address for that, we need to bswap the values after reading them out. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04s390x: fix s390-virtio-serialAlexander Graf
Commit 6b331efb733a0f913ddc0b7762a1307dec304061 broke the s390 proxy version of virtio-serial by only taking its PCI brother into account. So let's adjust s390-virtio-serial the same way as its PCI counterpart, making it compile and work again. Signed-off-by: Alexander Graf <agraf@suse.de> CC: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-04virtio: use generic name when possibleAlexander Graf
We have two different virtio buses: pci and s390. The abstraction path taken in qemu is to have generic aliases for each device type in the architecture specific qdev devices. So let's make use of these aliases whenever we can and define them whenever we can. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-09-07virtio-net: Introduce a new bottom half packet TXAlex Williamson
Based on a patch from Mark McLoughlin, this patch introduces a new bottom half packet transmitter that avoids the latency imposed by the tx_timer approach. Rather than scheduling a timer when a TX packet comes in, schedule a bottom half to be run from the iothread. The bottom half handler first attempts to flush the queue with notification disabled (this is where we could race with a guest without txburst). If we flush a full burst, reschedule immediately. If we send short of a full burst, try to re-enable notification. To avoid a race with TXs that may have occurred, we must then flush again. If we find some packets to send, the guest it probably active, so we can reschedule again. tx_timer and tx_bh are mutually exclusive, so we can re-use the tx_waiting flag to indicate one or the other needs to be setup. This allows us to seamlessly migrate between timer and bh TX handling. The bottom half handler becomes the new default and we add a new tx= option to virtio-net-pci. Usage: -device virtio-net-pci,tx=timer # select timer mitigation vs "bh" Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07virtio-net: Limit number of packets sent per TX flushAlex Williamson
If virtio_net_flush_tx() is called with notification disabled, we can race with the guest, processing packets at the same rate as they get produced. The trouble is that this means we have no guaranteed exit condition from the function and can spend minutes in there. Currently flush_tx is only called with notification on, which seems to limit us to one pass through the queue per call. An upcoming patch changes this. Also add an option to set this value on the command line as different workloads may wish to use different values. We can't necessarily support any random value, so this is a developer option: x-txburst= Usage: -device virtio-net-pci,x-txburst=64 # 64 packets per tx flush One pass through the queue (256) seems to be a good default value for this, balancing latency with throughput. We use a signed int for x-txburst because 2^31 packets in a burst would take many, many minutes to process and it allows us to easily return a negative value value from virtio_net_flush_tx() to indicate a back-off or error condition. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-09-07virtio-net: Make tx_timer timeout configurableAlex Williamson
Add an option to make the TX mitigation timer adjustable as a device option. The 150us hard coded default used currently is reasonable, but may not be suitable for all workloads, this gives us a way to adjust it using a single binary. We can't support any random option though, so use the "x-" prefix to indicate this is a developer option. Usage: -device virtio-net-pci,x-txtimer=500000,... # .5ms timeout Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-04-09Implement virtio resetAlexander Graf
The guest may issue a RESET command for virtio. So far we didn't bother to implement it, but with my new bootloader we actually need it for Linux to get back to a safe state. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-01virtio: add set_status callbackMichael S. Tsirkin
vhost net backend needs to be notified when frontend status changes. Add a callback, similar to set_features. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-06s390-virtio: Fix compile error for virtio-block initAmit Shah
Commit 428c149b0be790b440e1cbee185b152cdb22feec modified the argument that virtio_blk_init takes. Update the s390 bus code that calls this function. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Christoph Hellwig <hch@lst.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-10block: add topology qdev propertiesChristoph Hellwig
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20virtio-console: qdev conversion, new virtio-serial-busAmit Shah
This commit converts the virtio-console device to create a new virtio-serial bus that can host console and generic serial ports. The file hosting this code is now called virtio-serial-bus.c. The virtio console is now a very simple qdev device that sits on the virtio-serial-bus and communicates between the bus and qemu's chardevs. This commit also includes a few changes to the virtio backing code for pci and s390 to spawn the virtio-serial bus. As a result of the qdev conversion, we get rid of a lot of legacy code. The old-style way of instantiating a virtio console using -virtioconsole ... is maintained, but the new, preferred way is to use -device virtio-serial -device virtconsole,chardev=... With this commit, multiple devices as well as multiple ports with a single device can be supported. For multiple ports support, each port gets an IO vq pair. Since the guest needs to know in advance how many vqs a particular device will need, we have to set this number as a property of the virtio-serial device and also as a config option. In addition, we also spawn a pair of control IO vqs. This is an internal channel meant for guest-host communication for things like port open/close, sending port properties over to the guest, etc. This commit is a part of a series of other commits to get the full implementation of multiport support. Future commits will add other support as well as ride on the savevm version that we bump up here. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio: add features as qdev propertiesMichael S. Tsirkin
Add feature bits as properties to virtio. This makes it possible to e.g. define machine without indirect buffer support, which is required for 0.10 compatibility, or without hardware checksum support, which is required for 0.11 compatibility. Since default values for optional features are now set by qdev, get_features callback has been modified: it sets non-optional bits, and clears bits not supported by host. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11virtio: rename features -> guest_featuresMichael S. Tsirkin
Rename features->guest_features. This is what they are, avoid confusion with host features which we also need to keep around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18S390: Don't tell guest we're updating config spaceAlexander Graf
Currently we always set the "config space changed" bit to 1 when triggering any virtio interrupt. While that worked in 2.6.27, newer kernels interpret that value as "only the config space changed and nothing else happened". Since we usually trigger interrupts to tell the guest that something did happen, we just not tell it the config space changed for now until we implement the correct callback for that. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-05Add S390x virtio machine busAlexander Graf
On S390x we don't want to go through the hassle of emulating real existing hardware, because we don't need to for running Linux. So let's instead implement a machine that is 100% based on VirtIO which we fortunately implement already. This patch implements the bus that is the groundwork for such an S390x virtio machine. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 17:43:23 +0000