aboutsummaryrefslogtreecommitdiff
path: root/hw/rtl8139.c
AgeCommit message (Collapse)Author
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori
2011-12-14hw: Fix spelling in commentsStefan Weil
adress->address advertisment->advertisement begining->beginning bondary->boundary controler->controller controll->control convertion->conversion doesnt->doesn't existant->existent instuction->instruction loosing->losing managment->management multipled->multiplied negotation->negotiation runing->running teh->the unchangable->unchangeable writen->written yeild->yield Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-12Remove unnecessary casts from PCI DMA code in rtl8139David Gibson
This patch removes some unnecessary casts in the rtl8139 device, introduced by commit 3ada003aee2004d24f23b9cd6f4eda87d9601ddb 'rtl8139: Use PCI DMA stub functions'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-23rtl8139: Fix invalid IO access alignmentJulian Pidancet
This patch makes iPXE work with the rtl8139 emulation. The rtl8139 driver in iPXE issues a 16bit access on the ChipCmd register (offset 0x37) to check the status of the rx buffer. The offset of the ioport access was getting fixed up to 0x36 in qemu, causing the value read in iPXE to be invalid. This fixes an issue with iPXE reporting timeouts during TFTP transfers. Reposting this here because it is trivial enough and the original post on qemu-devel didn't attract much attention. Also, the inw() which was causing the issue has been replaced with an inb() in upstream iPXE: https://git.ipxe.org/ipxe.git/commit/91dd64ad25baa27954a7518e73df4fca8a2d0c93 Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01rtl8139: Use PCI DMA stub functionsEduard - Gabriel Munteanu
This updates the rtl8139 device emulation to use the explicit PCI DMA functions, instead of directly calling physical memory access functions. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-19pci: interrupt pin documentation updateMichael S. Tsirkin
Fix up some erroneous comments in code: interrupt pins are named A-D, the interrupt pin register is always readonly and isn't zeroed out on reset. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08rtl8139: convert to memory APIAvi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-15Merge remote-tracking branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: hw/virtio-pci.c
2011-06-12hw/rtl8139.c: convert to PCIDeviceInfo to initialize idsIsaku Yamahata
use PCIDeviceInfo to initialize ids. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-06Fix typo in code and commentsStefan Weil
Replace writeable -> writable Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: exec.c
2011-04-27rtl8139: Fix compilation for w32/w64Stefan Weil
Compilation for Windows needs a different declaration for the printf format attribute, so use the macro which was defined for this purpose. Cc: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: add format attribute to DPRINTFBenjamin Poirier
gcc can check the format string for correctness even when debugging output is not enabled. Have to make sure arguments are always available. They are optimized out if unneeded. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: use variadic macro for debug statementsBenjamin Poirier
Removes double (( )) to make DEBUG_PRINT compatible with real function calls. Change the name to DPRINTF to be consistent with other DPRINTF macros throughout qemu. Include the "RTL8139: " prefix in the macro. This changes some debug output slightly since the prefix wasn't present on all lines. Part of the change was done using the "coccinelle" tool with the following small semantic match: @@ expression E; @@ - DEBUG_PRINT((E)) + DPRINTF(E) Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: use TARGET_FMT_plx in debug messagesBenjamin Poirier
Prevents a compilation failure when DEBUG_RTL8139 is defined: CC libhw32/rtl8139.o cc1: warnings being treated as errors hw/rtl8139.c: In function ‘rtl8139_cplus_transmit_one’: hw/rtl8139.c:1960: error: format ‘%8lx’ expects type ‘long unsigned int’, but argument 5 has type ‘target_phys_addr_t’ make[1]: *** [rtl8139.o] Error 1 Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18PXE: Use consistent naming for PXE ROMsAlex Williamson
And add missing ROMs to tarbin build target. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2011-04-07rtl8139: convert to pci_register_bar_simple()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-26rtl8139: add vlan tag insertionBenjamin Poirier
Add support to the emulated hardware to insert vlan tags in packets going from the guest to the network. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: add vlan tag extractionBenjamin Poirier
Add support to the emulated hardware to extract vlan tags in packets going from the network to the guest. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> -- AFAIK, extraction is optional to get vlans working. The driver requests rx detagging but should not assume that it was done. Under Linux, the mac layer will catch the vlan ethertype. I only added this part for completeness (to emulate the hardware more truthfully...) Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: cleanup FCS calculationBenjamin Poirier
clean out ifdef's around ethernet checksum calculation Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Acked-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-13moving eeprom initializationWilliam Dauchy
The initialization should not be only on reset but also when initializing the device. It resolves a bug when hot plugging a pci network device: the mac address was always null. Signed-off-by: William Dauchy <wdauchy@gmail.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-05rtl8139: Use subsection to restrict migration after hotplugAlex Williamson
rtl8139 includes a cpu_register_io_memory acquired value in it's migration data. This is not only unecessary, but we should treat these values as unique to the VM instances since the value depends on call order. In most cases, this miraculously still works. However, if devices are added or removed from the system, it may represent an ordering change, which could cause the target rtl8139 device to make use of another device's cpu_register_io_memory value. If we detect that a hot-add/remove has occured, include a subsection to restrict migrations only to driver versions known to include this fix. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11rtl8139: Declare as little endianAlexander Graf
This patch replaces explicit bswaps with endianness hints to the mmio layer. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11rtl8139: address TODOsMichael S. Tsirkin
Make rtl8139 spec compliant, fixing reset values for command register. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-23rewrote timer implementation for rtl8139.Frediano Ziglio
Add a QEMU timer only when needed (timeout status not set, timeout irq wanted and timer set). This patch is required for Darwin. Patch has been tested under FreeBSD, Darwin and Linux. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19rtl8139: fix clang reporting unused assignment of VLAN tagging dataIgor V. Kovalenko
Currently we do not implement VLAN tagging for rtl8139(C+), still data is read from ring buffer headers. - augment unused assignment with TODO item - cast txdw1 to void for now Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-23rtl: switch to symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert rtl8139 to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02Fix qemu_malloc/qemu_free use in rtl8139.cJean-Christophe DUBOIS
rtl8139.c is using malloc()/free() instead of qemu_malloc()/qemu_free(). Fix it. Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-27rtl8139: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27rtl8139: port TallyCounters to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27rtl8139: use qdev properties for configuration.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/qdev: type safety in reset handlerMichael S. Tsirkin
Add type safety to qdev reset handlers, by declaring them as DeviceState * rather than void *. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev: convert rtl8139 to resetGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-24 13:00:19 +0000