aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)Author
2019-03-19riscv: sifive_u: Correct UART0's IRQ in the device treeBin Meng
The UART0's interrupt vector is wrongly set to 1 in the device tree. Use SIFIVE_U_UART0_IRQ instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19riscv: sifive_uart: Generate TX interruptBin Meng
At present the sifive uart model only generates RX interrupt. This updates it to generate TX interrupt so that it is more useful. Note the TX fifo is still unimplemented. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19riscv: sifive_u: Allow up to 4 CPUs to be createdAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Allow interrupt controllers to claim interruptsMichael Clark
We can't allow the supervisor to control SEIP as this would allow the supervisor to clear a pending external interrupt which will result in lost a interrupt in the case a PLIC is attached. The SEIP bit must be hardware controlled when a PLIC is attached. This logic was previously hard-coded so SEIP was always masked even if no PLIC was attached. This patch adds riscv_cpu_claim_interrupts so that the PLIC can register control of SEIP. In the case of models without a PLIC (spike), the SEIP bit remains software controlled. This interface allows for hardware control of supervisor timer and software interrupts by other interrupt controller models. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-19RISC-V: Replace __builtin_popcount with ctpop8 in PLICMichael Clark
The mode variable only uses the lower 4-bits (M,H,S,U) so replace the GCC specific __builtin_popcount with ctpop8. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-11riscv/Kconfig: enable PCI_DEVICESDavid Abdurachmanov
Re-enable PCI_DEVICES for RISC-V. The patch is based on other <arch>/Kconfig. Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com> Fixes: 82a230d5a303 ("riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directives") Message-Id: <20190311091256.18385-1-david.abdurachmanov@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07riscv-softmmu.mak: replace CONFIG_* with Kconfig "select" directivesPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-11riscv: Ensure the kernel start address is correctly castAlistair Francis
Cast the kernel start address to the target bit length. This ensures that we calculate the initrd offset to a valid address for the architecture. Steps to reproduce the original problem (reported by Alex): Build U-Boot for the virt machine for riscv32. Then run it with $ qemu-system-riscv32 -M virt -kernel u-boot -nographic -initrd <a file> You can find the initrd address with U-Boot# fdt addr $fdtcontroladdr U-Boot# fdt ls /chosen Then take a peek at that address: U-Boot# md.b <addr> and you will see that there is nothing there without this patch. The reason is that the binary was loaded to a negative address. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Alexander Graf <agraf@suse.de> Reported-by: Alexander Graf <agraf@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-05hw/riscv/Makefile.objs: Create CONFIG_* for riscv boardsYang Zhong
Add the new configs to default-configs/riscv*-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-19-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-20sifive_uart: Implement interrupt pending registerNathaniel Graff
The watermark bits are set in the interrupt pending register according to the configuration of txcnt and rxcnt in the txctrl and rxctrl registers. Since the UART TX does not implement a FIFO, the txwm bit is set as long as the TX watermark level is greater than zero. Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20RISC-V: Enable second UART on sifive_e and sifive_uMichael Clark
Previously the second UARTs on the sifive_e and sifive_u machines where disabled due to check-qtest-riscv32 and check-qtest-riscv64 failures. Recent changes in the QEMU core serial code have resolved these failures so the second UARTs can be instantiated. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20RISC-V: Fix PLIC pending bitfield readsMichael Clark
The address calculation for the pending bitfield had a copy paste bug. This bug went unnoticed because the Linux PLIC driver does not read the pending bitfield, rather it reads pending interrupt numbers from the claim register and writes acknowledgements back to the claim register. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Reported-by: Vincent Siles <vincent.siles@ens-lyon.org> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20RISC-V: Fix CLINT timecmp low 32-bit writesMichael Clark
A missing shift made updates to the low order bits of timecmp erroneously copy the old low order bits into the high order bits of the 64-bit timecmp register. Add the missing shift and rename timecmp local variables to timecmp_hi and timecmp_lo. This bug didn't show up as the low order bits are usually written first followed by the high order bits meaning the high order bits contained an invalid value between the timecmp_lo and timecmp_hi update. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Co-Authored-by: Johannes Haring <johannes.haring@gmx.net> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_u: Set 'clock-frequency' DT property for SiFive UARTAnup Patel
The 'clock-frequency' DT property is required by U-Boot to compute the divider value. This patch sets the 'clock-frequency' DT property of the SiFive UART device tree node (similar to virt machine). Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_u: Add clock DT node for GEM ethernetAnup Patel
The GEM ethernet on SiFive unleashed has fixed input clock of 125MHz as-per SiFive FU540 manual. This patch updates FDT generation for QEMU sifive_u machine to provide fixed-rate clock for GEM ethernet. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20hw/riscv/virt: Connect the gpex PCIeAlistair Francis
Connect the gpex PCIe device based on the device tree included in the HiFive Unleashed ROM. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20hw/riscv/virt: Adjust memory layout spacingAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-13hw/riscv/virt: Free the test device tree node nameAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-11-08riscv: spike: Fix memory leak in the board initAlistair Francis
Coverity caught a malloc() call that was never freed. This patch ensures that we free the memory but also updates the allocation to use g_strdup_printf() instead of malloc(). Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Don't add NULL bootargs to device-treeMichael Clark
Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Add missing free for plic_hart_configMichael Clark
Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Allow setting and clearing multiple irqsMichael Clark
Change the API of riscv_set_local_interrupt to take a write mask and value to allow setting and clearing of multiple local interrupts atomically in a single call. Rename the new function to riscv_cpu_update_mip. Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-25Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-09-24' ↵Peter Maydell
into staging Error reporting & miscellaneous patches for 2018-09-24 # gpg: Signature made Mon 24 Sep 2018 16:16:50 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-09-24: MAINTAINERS: Fix F: patterns that don't match anything Drop "qemu:" prefix from error_report() arguments qemu-error: make use of {error, warn}_report_once_cond qemu-error: add {error, warn}_report_once_cond Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-24Drop "qemu:" prefix from error_report() argumentsMao Zhongyi
error_report and friends already add a "qemu-system-xxx" prefix to the string, so a "qemu:" prefix is redundant in the string. Just drop it. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-09-05hw/riscv/spike: Set the soc device tree node as a simple-busAlistair Francis
To allow Linux to enumerate devices on the /soc/ node set it as a "simple-bus". Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-09-05hw/riscv/virtio: Set the soc device tree node as a simple-busAlistair Francis
To allow Linux to enumerate devices on the /soc/ node set it as a "simple-bus". Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-09-04RISC-V: Use atomic_cmpxchg to update PLIC bitmapsMichael Clark
The PLIC previously used a mutex to protect against concurrent access to the claimed and pending bitfields. Instead of using a mutex, we update the bitfields using atomic_cmpxchg. Rename sifive_plic_num_irqs_pending to sifive_plic_irqs_pending and add an early out if any interrupts are pending as the count of pending interrupts is not used. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2018-07-19spike: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-07-19riscv_hart: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-07-19virt: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-07-19sifive_u: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-07-19sifive_e: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-07-05hw/riscv/sifive_u: Connect the Cadence GEM Ethernet deviceAlistair Francis
Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Move the uart device tree node under /soc/Alistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Set the interrupt controller number of interruptsAlistair Francis
Set the interrupt-controller ndev to the correct number taken from the HiFive Unleashed board. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Set the soc device tree node as a simple-busAlistair Francis
To allow Linux to ennumerate devices on the /soc/ node set it as a "simple-bus". Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_plic: Use gpios instead of irqsAlistair Francis
Instead of creating the interrupt in lines with qemu_allocate_irq() use qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*() helpers later on. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_e: Create a SiFive E SoC objectAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Create a SiFive U SoC objectAlistair Francis
Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-02hw/riscv: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com> Message-Id: <20180625124238.25339-17-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "exec/address-spaces.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/address-spaces.h"' hw include/hw | \ cut -d: -f-1 | \ xargs egrep -L "(get_system_|address_space_)" | \ xargs sed -i.bak '/#include "exec\/address-spaces.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-12-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-10Merge remote-tracking branch ↵Peter Maydell
'remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3' into staging RISC-V: QEMU 2.13 Minor Fixes * Require libfdt when configuring for 'riscv*-softmmu' * Increase HTIF priority and allow zero base address # gpg: Signature made Wed 09 May 2018 11:15:33 BST # gpg: using DSA key 6BF1D7B357EF3E4F # gpg: Good signature from "Michael Clark <michaeljclark@mac.com>" # gpg: aka "Michael Clark <mjc@sifive.com>" # gpg: aka "Michael Clark <michael@metaparadigm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 7C99 930E B17C D8BA 073D 5EFA 6BF1 D7B3 57EF 3E4F * remotes/riscv/tags/riscv-qemu-2.13-minor-fixes-3: riscv: requires libfdt riscv: htif: increase the priority of the htif subregion riscv: spike: allow base == 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-09riscv: htif: increase the priority of the htif subregionKONRAD Frederic
The htif device is supposed to be mapped over an other subregion. So increase its priority to one to avoid any conflict. Here is the output of info mtree: Before: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart 0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom 0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint 0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram address-space: I/O 0000000000000000-000000000000ffff (prio 0, i/o): io address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000000f (prio 0, i/o): riscv.htif.uart 0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom 0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint 0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram After: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart 0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom 0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint 0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram address-space: I/O 0000000000000000-000000000000ffff (prio 0, i/o): io address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000000f (prio 1, i/o): riscv.htif.uart 0000000000000000-0000000000011fff (prio 0, ram): riscv.spike.bootrom 0000000002000000-000000000200ffff (prio 0, i/o): riscv.sifive.clint 0000000080000000-0000000087ffffff (prio 0, ram): riscv.spike.ram Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Signed-off-by: Michael Clark <mjc@sifive.com> Message-Id: <1525360636-18229-3-git-send-email-frederic.konrad@adacore.com>
2018-05-09riscv: spike: allow base == 0KONRAD Frederic
The sanity check on base doesn't allow htif to be mapped @0. Check if the symbol exists instead so we can map it where we want. Reviewed-by: Michael Clark <mjc@sifive.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Signed-off-by: Michael Clark <mjc@sifive.com> Message-Id: <1525360636-18229-2-git-send-email-frederic.konrad@adacore.com>
2018-05-06RISC-V: Mark ROM read-only after copying in codeMichael Clark
The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-05-06RISC-V: Remove EM_RISCV ELF_MACHINE indirectionMichael Clark
Pointless indirection. Other ports use EM_ constants directly. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove unused class definitionsMichael Clark
Removes a whole lot of unnecessary boilerplate code. Machines don't need to be objects. The expansion of the SOC object model for the RISC-V machines will happen in the future as SiFive plans to add their FE310 and FU540 SOCs to QEMU. However, it seems that this present boilerplate is complete unnecessary. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove identity_translate from load_elfMichael Clark
When load_elf is called with NULL as an argument to the address translate callback, it does an identity translation. This commit removes the redundant identity_translate callback. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-18 04:10:39 +0000