aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)Author
2021-05-11hw/riscv: Fix OT IBEX reset vectorAlexander Wagner
The IBEX documentation [1] specifies the reset vector to be "the most significant 3 bytes of the boot address and the reset value (0x80) as the least significant byte". [1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420080008.119798-1-alexander.wagner@ulal.de Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11hw/riscv: Enable VIRTIO_VGA for RISC-V virt machineAlistair Francis
imply VIRTIO_VGA for the virt machine, this fixes the following error when specifying `-vga virtio` as a command line argument: qemu-system-riscv64: Virtio VGA not available Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 7ac26fafee8bd59d2a0640f3233f8ad1ab270e1e.1617367317.git.alistair.francis@wdc.com
2021-05-11hw/opentitan: Update the interrupt layoutAlistair Francis
Update the OpenTitan interrupt layout to match the latest OpenTitan bitstreams. This involves changing the Ibex PLIC memory layout and the UART interrupts. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: e92b696f1809c9fa4410da2e9f23c414db5a6960.1617202791.git.alistair.francis@wdc.com
2021-05-11hw/riscv: Connect Shakti UART to Shakti platformVijai Kumar K
Connect one shakti uart to the shakti_c machine. Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-5-vijai@behindbytes.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11riscv: Add initial support for Shakti C machineVijai Kumar K
Add support for emulating Shakti reference platform based on C-class running on arty-100T board. https://gitlab.com/shaktiproject/cores/shakti-soc/-/blob/master/README.rst Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210401181457.73039-3-vijai@behindbytes.com [Changes by AF: - Check for mstate->firmware before loading it ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11hw/riscv: sifive_e: Add 'const' to sifive_e_memmap[]Bin Meng
This was accidentally dropped before. Add it back. Fixes: 732612856a8 ("hw/riscv: Drop 'struct MemmapEntry'") Reported-by: Emmanuel Blot <eblot.ml@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210331103612.654261-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/irq.h if it is not necessaryThomas Huth
Many files include hw/irq.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210327050236.2232347-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-22hw/riscv: microchip_pfsoc: Map EMMC/SD mux registerBin Meng
Since HSS commit c20a89f8dcac, the Icicle Kit reference design has been updated to use a register mapped at 0x4f000000 instead of a GPIO to control whether eMMC or SD card is to be used. With this support the same HSS image can be used for both eMMC and SD card boot flow, while previously two different board configurations were used. This is undocumented but one can take a look at the HSS code HSS_MMCInit() in services/mmc/mmc_api.c. With this commit, HSS image built from 2020.12 release boots again. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210322075248.136255-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: allow ramfb on virtAsherah Connor
Allow ramfb on virt. This lets `-device ramfb' work. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-3-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: Add fw_cfg support to virtAsherah Connor
Provides fw_cfg for the virt machine on riscv. This enables using e.g. ramfb later. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-2-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10hw/riscv: migrate fdt field to generic MachineStateAlex Bennée
This is a mechanical change to make the fdt available through MachineState. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-3-alex.bennee@linaro.org>
2021-03-09qtest: delete superfluous inclusions of qtest.hChen Qun
There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-04hw/riscv: virt: Map high mmio for PCIeBin Meng
Some peripherals require 64-bit PCI address, so let's map the high mmio space for PCIe. For RV32, the address is hardcoded to below 4 GiB from the highest accessible physical address. For RV64, the base address depends on top of RAM and is aligned to its size which is using 16 GiB for now. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: virt: Limit RAM size in a 32-bit systemBin Meng
RV32 supports 34-bit physical address hence the maximum RAM size should be limited. Limit the RAM size to 10 GiB, which leaves some room for PCIe high mmio space. For 32-bit host, this is not needed as machine->ram_size cannot represent a RAM size that big. Use a #if size test to only do the size limitation for the 64-bit host. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()Bin Meng
`link_up` is never used in gpex_pcie_init(). Drop it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: Drop 'struct MemmapEntry'Bin Meng
There is already a MemMapEntry type defined in hwaddr.h. Let's drop the RISC-V defined `struct MemmapEntry` and use the existing one. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210220144807.819-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: sifive_u: Add QSPI2 controller and connect an SD cardBin Meng
This adds the QSPI2 controller to the SoC, and connects an SD card to it. The generation of corresponding device tree source fragment is also added. Specify machine property `msel` to 11 to boot the same upstream U-Boot SPL and payload image for the SiFive HiFive Unleashed board. Note subsequent payload is stored in the SD card image. $ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \ -bios u-boot-spl.bin -drive file=sdcard.img,if=sd Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: sifive_u: Add QSPI0 controller and connect a flashBin Meng
This adds the QSPI0 controller to the SoC, and connects an ISSI 25WP256 flash to it. The generation of corresponding device tree source fragment is also added. Since the direct memory-mapped mode is not supported by the SiFive SPI model, the <reg> property does not populate the second group which represents the memory mapped address of the SPI flash. With this commit, upstream U-Boot for the SiFive HiFive Unleashed board can boot on QEMU 'sifive_u' out of the box. This allows users to develop and test the recommended RISC-V boot flow with a real world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to L2LIM, then U-Boot SPL loads the payload from SPI flash that is combined with OpenSBI fw_dynamic firmware and U-Boot proper. Specify machine property `msel` to 6 to allow booting from the SPI flash. U-Boot spl is directly loaded via `-bios`, and subsequent payload is stored in the SPI flash image. Example command line: $ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \ -bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16riscv: Pass RISCVHartArrayState by pointerAlistair Francis
We were accidently passing RISCVHartArrayState by value instead of pointer. The type is 824 bytes long so let's correct that and pass it by pointer instead. Fixes: Coverity CID 1438099 Fixes: Coverity CID 1438100 Fixes: Coverity CID 1438101 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: f3e04424723e0e222769991896cc82308fd23f76.1610751609.git.alistair.francis@wdc.com
2021-01-16hw/riscv: sifive_u: Use SIFIVE_U_CPU for mc->default_cpu_typeBin Meng
SIFIVE_U_CPU is conditionally set to SIFIVE_U34 or SIFIVE_U54, hence there is no need to use #idef to set the mc->default_cpu_type. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210109143637.29645-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16RISC-V: Place DTB at 3GB boundary instead of 4GBAtish Patra
Currently, we place the DTB at 2MB from 4GB or end of DRAM which ever is lesser. However, Linux kernel can address only 1GB of memory for RV32. Thus, it can not map anything beyond 3GB (assuming 2GB is the starting address). As a result, it can not process DT and panic if opensbi dynamic firmware is used. While at it, place the DTB further away to avoid in memory placement issues in future. Fix this by placing the DTB at 16MB from 3GB or end of DRAM whichever is lower. Fixes: 66b1205bc5ab ("RISC-V: Copy the fdt in dram instead of ROM") Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Signed-off-by: Atish Patra <atish.patra@wdc.com> Message-id: 20210107091127.3407870-1-atish.patra@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-17riscv/opentitan: Update the OpenTitan memory layoutAlistair Francis
OpenTitan is currently only avalible on an FPGA platform and the memory addresses have changed. Update to use the new memory addresses. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 8eb65314830a75d0fea3fccf77bc45b8ddd01c42.1607982831.git.alistair.francis@wdc.com
2020-12-17hw/riscv: Use the CPU to determine if 32-bitAlistair Francis
Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against. This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 8ab7614e5df93ab5267788b73dcd75f9f5615e82.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: sifive_u: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 40d6df4dd05302c566e419be3a1fef7799e57c2e.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: spike: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: ac75037dd58061486de421a0fcd9ac8a92014607.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: virt: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: d7ca1aca672515e6a4aa0d41716238b055f3f25c.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: boot: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 51e9842dbed1acceebad7f97bd3aae69aa1ac19e.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: virt: Remove target macro conditionalsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: aed1174c2efd2f050fa5bd8f524d68795b12c0e4.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: spike: Remove target macro conditionalsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 04ac7fba2348c92f296a5e6a9959ac72b77ae4c6.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: Expand the is 32-bit check to support more CPUsAlistair Francis
Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 9a13764115ba78688ba61b56526c6de65fc3ef42.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: microchip_pfsoc: add QSPI NOR flashVitaly Wool
Add QSPI NOR flash definition for Microchip PolarFire SoC. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: 20201112074950.33283-1-vitaly.wool@konsulko.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-17hw/riscv: sifive_u: Add UART1 DT node in the generated DTBAnup Patel
The sifive_u machine emulates two UARTs but we have only UART0 DT node in the generated DTB so this patch adds UART1 DT node in the generated DTB. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201111094725.3768755-1-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-12-15vl: make qemu_get_machine_opts staticPaolo Bonzini
Machine options can be retrieved as properties of the machine object. Encourage that by removing the "easy" accessor to machine options. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10riscv: do not use ram_size globalPaolo Bonzini
Use the machine properties instead. Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-03hw/riscv: microchip_pfsoc: Hook the I2C1 controllerBin Meng
The latest SD card image [1] released by Microchip ships a Linux kernel with built-in PolarFire SoC I2C driver support. The device tree file includes the description for the I2C1 node hence kernel tries to probe the I2C1 device during boot. It is enough to create an unimplemented device for I2C1 to allow the kernel to continue booting to the shell. [1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Correct DDR memory mapBin Meng
When system memory is larger than 1 GiB (high memory), PolarFire SoC maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is aliased to the same 1 GiB low memory with different cache attributes. At present QEMU maps the system memory contiguously from 0x8000_0000. This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is the alias to the high memory, and even physical memory is only 1 GiB, the HSS codes still tries to probe the high memory alias address. It seems there is no issue on the real hardware, so we will have to take that into the consideration in our emulation. Due to this, we we increase the default system memory size to 1537 MiB (the minimum required high memory size by HSS) so that user gets notified an error when less than 1537 MiB is specified. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Map the reserved memory at address 0Bin Meng
Somehow HSS needs to access address 0 [1] for the DDR calibration data which is in the chipset's reserved memory. Let's map it. [1] See the config_copy() calls in various places in ddr_setup() in the HSS source codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the SYSREG moduleBin Meng
Previously SYSREG was created as an unimplemented device. Now that we have a simple SYSREG module, connect it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the IOSCB moduleBin Meng
Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect DDR memory controller modulesBin Meng
Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Document where to look at the SoC memory mapsBin Meng
It is not easy to find out the memory map for a specific component in the PolarFire SoC as the information is scattered in different documents. Add some comments so that people can know where to get such information from the Microchip website. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-2-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: virt: Allow passing custom DTBAnup Patel
Extend virt machine to allow passing custom DTB using "-dtb" command-line parameter. This will help users pass modified DTB to virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201022053225.2596110-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: sifive_u: Allow passing custom DTBAnup Patel
Extend sifive_u machine to allow passing custom DTB using "-dtb" command-line parameter. This will help users pass modified DTB or Linux SiFive DTB to sifive_u machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201022053225.2596110-1-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22hw/riscv: Load the kernel after the firmwareAlistair Francis
Instead of loading the kernel at a hardcoded start address, let's load the kernel at the next aligned address after the end of the firmware. This should have no impact for current users of OpenSBI, but will allow loading a noMMU kernel at the start of memory. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 46c00c4f15b42feb792090e3d74359e180a6d954.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Add a riscv_is_32_bit() functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 4c6a85dfb6dd470aa79356ebc1b02f479c2758e0.1602634524.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Return the end address of the loaded firmwareAlistair Francis
Instead of returning the unused entry address from riscv_load_firmware() instead return the end address. Also return the end address from riscv_find_and_load_firmware(). This tells the caller if a firmware was loaded and how big it is. This can be used to determine the load address of the next image (usually the kernel). Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 558cf67162342d65a23262248b040563716628b2.1602634524.git.alistair.francis@wdc.com
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 08:03:56 +0000