aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)Author
2020-06-19hw/riscv: sifive_u: Sort the SoC memmap table entriesBin Meng
Move the flash and DRAM to the end of the SoC memmap table. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Support different boot source per MSEL pin stateBin Meng
SiFive FU540 SoC supports booting from several sources, which are controlled using the Mode Select (MSEL[3:0]) pins on the chip. Typically, the boot process runs through several stages before it begins execution of user-provided programs. The SoC supports booting from memory-mapped QSPI flash, which is how start_in_flash property is used for at present. This matches MSEL = 1 configuration (QSPI0). Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL). It's not necessary for QEMU to implement the full ZSBL ROM codes, because we know ZSBL downloads the next stage program into the L2 LIM at address 0x8000000 and executes from there. We can bypass the whole ZSBL execution and use "-bios" to load the next stage program directly if MSEL indicates a ZSBL booting flow. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004Bin Meng
Per the SiFive manual, all E/U series CPU cores' reset vector is at 0x1004. Update our codes to match the hardware. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1592268641-7478-3-git-send-email-bmeng.cn@gmail.com Message-Id: <1592268641-7478-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add a new property msel for MSEL pin stateBin Meng
On SiFive FU540 SoC, the value stored at physical address 0x1000 stores the MSEL pin state that is used to control the next boot location that ROM codes jump to. Add a new property msel to sifive_u machine for this. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-12-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Rename serial property get/set functions to a generic nameBin Meng
In prepration to add more properties to this machine, rename the existing serial property get/set functions to a generic name. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-11-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Add reset functionalityBin Meng
The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. Let's set up the GPIO pin#10 and insert a "gpio-restart" device tree node so that reboot is now functional with QEMU 'sifive_u' machine. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-10-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Do not blindly trigger output IRQsBin Meng
At present the GPIO output IRQs are triggered each time any GPIO register is written. However this is not correct. We should only trigger the output IRQ when the pin is configured as output enable. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-9-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Hook a GPIO controllerBin Meng
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines. This hooks the exsiting SiFive GPIO model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Add a new 'ngpio' propertyBin Meng
Add a new property to represent the number of GPIO pins supported by the GPIO controller. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_gpio: Clean up the codesBin Meng
Do various minor clean-ups to the exisiting codes for: - coding convention conformance - remove unnecessary blank lines - spell SiFive correctly Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Generate device tree node for OTPBin Meng
Upstream U-Boot v2020.07 codes switch to access SiFive FU540 OTP based on device tree information. Let's generate the device tree node for OTP. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-5-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bitBin Meng
There is no need to retrieve all PLIC IRQ information in order to just connect the GEM IRQ. Use qdev_get_gpio_in() directly like what is done for other peripherals. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-4-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: opentitan: Remove the riscv_ prefix of the machine* and soc* functionsBin Meng
This was done in the virt & sifive_u codes, but opentitan codes were missed. Remove the riscv_ prefix of the machine* and soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-3-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functionsBin Meng
This was done in the virt & sifive_u codes, but sifive_e codes were missed. Remove the riscv_ prefix of the machine* and soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1591625864-31494-2-git-send-email-bmeng.cn@gmail.com Message-Id: <1591625864-31494-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-19riscv/opentitan: Connect the UART deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19riscv/opentitan: Connect the PLIC deviceAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-19hw/char: Initial commit of Ibex UARTAlistair Francis
This is the initial commit of the Ibex UART device. Serial TX is working, while RX has been implemeneted but untested. This is based on the documentation from: https://docs.opentitan.org/hw/ip/uart/doc/ Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
2020-06-19riscv/opentitan: Fix the ROM sizeAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reported-by: Damien Hedde <damien.hedde@greensocs.com>
2020-06-19sifive_e: Support the revB machineAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2Markus Armbruster
This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1Markus Armbruster
I'm converting from qdev_set_parent_bus()/realize to qdev_realize(); recent commit "qdev: Convert uses of qdev_set_parent_bus() with Coccinelle" explains why. sysbus_init_child_obj() is a wrapper around object_initialize_child_with_props() and qdev_set_parent_bus(). It passes no properties. Convert sysbus_init_child_obj()/realize to object_initialize_child()/ qdev_realize(). Coccinelle script: @@ expression parent, name, size, type, errp; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, &child, size, type); + sysbus_init_child_XXX(parent, name, &child, size, type); ... - object_property_set_bool(OBJECT(&child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(&child), errp); @@ expression parent, name, size, type, errp; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); ... - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); @@ expression parent, name, size, type; expression child; expression dev; expression expr; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); ... dev = DEVICE(child); ... when != dev = expr; - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-48-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15qom: Tidy up a few object_initialize_child() callsMarkus Armbruster
The callers of object_initialize_child() commonly pass either &child, sizeof(child), or pchild, sizeof(*pchild). Tidy up the few that don't, mostly to keep the next commit simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-36-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() manuallyMarkus Armbruster
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15riscv: Fix to put "riscv.hart_array" devices on sysbusMarkus Armbruster
riscv_sifive_e_soc_init(), riscv_sifive_u_soc_init(), spike_board_init(), spike_v1_10_0_board_init(), spike_v1_09_1_board_init(), and riscv_virt_board_init() create "riscv-hart_array" sysbus devices in a way that leaves them unplugged. Create them the common way that puts them into the main system bus. Affects machines sifive_e, sifive_u, spike, spike_v1.10, spike_v1.9.1, and virt. Visible in "info qtree", here's the change for sifive_e: bus: main-system-bus type System + dev: riscv.hart_array, id "" + num-harts = 1 (0x1) + hartid-base = 0 (0x0) + cpu-type = "sifive-e31-riscv-cpu" dev: sifive_soc.gpio, id "" Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200609122339.937862-20-armbru@redhat.com>
2020-06-03riscv: Initial commit of OpenTitan machineAlistair Francis
This adds a barebone OpenTitan machine to QEMU. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-06-03riscv: sifive_e: Manually define the machineAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-06-03hw/riscv: spike: Remove deprecated ISA specific machinesAlistair Francis
The ISA specific Spike machines have been deprecated in QEMU since 4.1, let's finally remove them. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2020-06-03hw/riscv: virt: Remove the riscv_ prefix of the machine* functionsBin Meng
Remove the riscv_ prefix of the machine* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-2-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-03hw/riscv: sifive_u: Remove the riscv_ prefix of the soc* functionsBin Meng
To keep consistency with the machine* functions, remove the riscv_ prefix of the soc* functions. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-03riscv: Change the default behavior if no -bios option is specifiedBin Meng
Per QEMU deprecated doc, QEMU 4.1 introduced support for the -bios option in QEMU for RISC-V for the virt machine and sifive_u machine. The default behavior has been that QEMU does not automatically load any firmware if no -bios option is included. Now 2 releases passed, it's time to change the default behavior to load the default OpenSBI firmware automatically. The firmware is included with the QEMU release and no user interaction is required. All a user needs to do is specify the kernel they want to boot with the -kernel option. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1588335545-649-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1588335545-649-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-06-03riscv: Suppress the error report for QEMU testing with riscv_find_firmware()Bin Meng
We only ship plain binary bios images in the QEMU source. With Spike machine that uses ELF images as the default bios, running QEMU test will complain hence let's suppress the error report for QEMU testing. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-Id: <1588348254-7241-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-05-18hw: Use QEMU_IS_ALIGNED() on parallel flash block sizePhilippe Mathieu-Daudé
Use the QEMU_IS_ALIGNED() macro to verify the flash block size is properly aligned. It is quicker to process when reviewing. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200511205246.24621-1-philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-15qom: Drop object_property_set_description() parameter @errpMarkus Armbruster
object_property_set_description() and object_class_property_set_description() fail only when property @name is not found. There are 85 calls of object_property_set_description() and object_class_property_set_description(). None of them can fail: * 84 immediately follow the creation of the property. * The one in spapr_rng_instance_init() refers to a property created in spapr_rng_class_init(), from spapr_rng_properties[]. Every one of them still gets to decide what to pass for @errp. 51 calls pass &error_abort, 32 calls pass NULL, one receives the error and propagates it to &error_abort, and one propagates it to &error_fatal. I'm actually surprised none of them violates the Error API. What are we gaining by letting callers handle the "property not found" error? Use when the property is not known to exist is simpler: you don't have to guard the call with a check. We haven't found such a use in 5+ years. Until we do, let's make life a bit simpler and drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-8-armbru@redhat.com> [One semantic rebase conflict resolved]
2020-04-29hw/riscv/spike: Allow more than one CPUsAnup Patel
Currently, the upstream Spike ISA simulator allows more than one CPUs so we update QEMU Spike machine on similar lines to allow more than one CPUs. The maximum number of CPUs for QEMU Spike machine is kept same as QEMU Virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200427080644.168461-4-anup.patel@wdc.com Message-Id: <20200427080644.168461-4-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29hw/riscv/spike: Allow loading firmware separately using -bios optionAnup Patel
This patch extends Spike machine support to allow loading OpenSBI firmware (fw_jump.elf) separately using -bios option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200427080644.168461-3-anup.patel@wdc.com Message-Id: <20200427080644.168461-3-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29hw/riscv: Add optional symbol callback ptr to riscv_load_firmware()Anup Patel
This patch adds an optional function pointer, "sym_cb", to riscv_load_firmware() which provides the possibility to access the symbol table during kernel loading. The pointer is ignored, if supplied with flat (non-elf) firmware image. The Spike board requires it locate the HTIF symbols from firmware ELF passed via "-bios" option. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200427080644.168461-2-anup.patel@wdc.com Message-Id: <20200427080644.168461-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv: sifive_e: Support changing CPU typeCorey Wharton
Allows the CPU to be changed from the default via the -cpu command line option. Signed-off-by: Corey Wharton <coreyw7@fb.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200313193429.8035-2-coreyw7@fb.com Message-Id: <20200313193429.8035-2-coreyw7@fb.com> [ Changes by AF: - Set "cpu-type" from the machine and not SoC ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29hw/riscv: Generate correct "mmu-type" for 32-bit machinesBin Meng
32-bit machine should have its CPU's "mmu-type" set to "riscv,sv32". Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1583585319-26603-1-git-send-email-bmeng.cn@gmail.com Message-Id: <1583585319-26603-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u machineBin Meng
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to specify the board serial number. When not given, the default serial number 1 is used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1573916930-19068-1-git-send-email-bmeng.cn@gmail.com> [ Changed by AF: - Use the SoC's serial property to pass the info to the SoC - Fixup commit title - Rebase on file restructuring ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-04-29riscv/sifive_u: Add a serial property to the sifive_u SoCAlistair Francis
At present the board serial number is hard-coded to 1, and passed to OTP model during initialization. Firmware (FSBL, U-Boot) uses the serial number to generate a unique MAC address for the on-chip ethernet controller. When multiple QEMU 'sifive_u' instances are created and connected to the same subnet, they all have the same MAC address hence it creates a unusable network. A new "serial" property is introduced to the sifive_u SoC to specify the board serial number. When not given, the default serial number 1 is used. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-29riscv/sifive_u: Fix up file orderingAlistair Francis
Split the file into clear machine and SoC sections. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-29various: Remove suspicious '\' character outside of #define in C codePhilippe Mathieu-Daudé
Fixes the following coccinelle warnings: $ spatch --sp-file --verbose-parsing ... \ scripts/coccinelle/remove_local_err.cocci ... SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213 SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806 SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329 SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133 SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081 SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529 SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468 SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221 SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172 SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173 Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200412223619.11284-2-f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Bugfixes all over the place * get/set_uint cleanups (Felipe) * Lock guard support (Stefan) * MemoryRegion ownership cleanup (Philippe) * AVX512 optimization for buffer_is_zero (Robert) # gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (62 commits) hw/arm: Let devices own the MemoryRegion they create hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions hw/arm/stm32: Use memory_region_init_rom() with read-only regions hw/char: Let devices own the MemoryRegion they create hw/riscv: Let devices own the MemoryRegion they create hw/dma: Let devices own the MemoryRegion they create hw/display: Let devices own the MemoryRegion they create hw/core: Let devices own the MemoryRegion they create scripts/cocci: Patch to let devices own their MemoryRegions scripts/cocci: Patch to remove unnecessary memory_region_set_readonly() scripts/cocci: Patch to detect potential use of memory_region_init_rom hw/sparc: Use memory_region_init_rom() with read-only regions hw/sh4: Use memory_region_init_rom() with read-only regions hw/riscv: Use memory_region_init_rom() with read-only regions hw/ppc: Use memory_region_init_rom() with read-only regions hw/pci-host: Use memory_region_init_rom() with read-only regions hw/net: Use memory_region_init_rom() with read-only regions hw/m68k: Use memory_region_init_rom() with read-only regions hw/display: Use memory_region_init_rom() with read-only regions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17hw/riscv: Let devices own the MemoryRegion they createPhilippe Mathieu-Daudé
Avoid orphan memory regions being added in the /unattached QOM container. This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-17hw/riscv: Use memory_region_init_rom() with read-only regionsPhilippe Mathieu-Daudé
This commit was produced with the Coccinelle script scripts/coccinelle/memory-region-housekeeping.cocci. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>