aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)Author
2022-03-03hw: riscv: opentitan: fixup SPI addressesWilfred Mallawa
This patch updates the SPI_DEVICE, SPI_HOST0, SPI_HOST1 base addresses. Also adds these as unimplemented devices. The address references can be found [1]. [1] https://github.com/lowRISC/opentitan/blob/6c317992fbd646818b34f2a2dbf44bc850e461e4/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h#L107 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220218063839.405082-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Increase maximum number of allowed CPUsAnup Patel
To facilitate software development of RISC-V systems with large number of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9). We also add a detailed source level comments about limit defines which impact the physical address space utilization. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-Id: <20220220085526.808674-6-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA IMSIC support to virt machineAnup Patel
We extend virt machine to emulate both AIA IMSIC and AIA APLIC devices only when "aia=aplic-imsic" parameter is passed along with machine name in the QEMU command-line. The AIA IMSIC is only a per-HART MSI controller so we use AIA APLIC in MSI-mode to forward all wired interrupts as MSIs to the AIA IMSIC. We also provide "aia-guests=<xyz>" parameter which can be used to specify number of VS-level AIA IMSIC Guests MMIO pages for each HART. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-4-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA APLIC support to virt machineAnup Patel
We extend virt machine to emulate AIA APLIC devices only when "aia=aplic" parameter is passed along with machine name in QEMU command-line. When "aia=none" or not specified then we fallback to original PLIC device emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-2-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16hw/riscv: virt: Use AIA INTC compatible string when availableAnup Patel
We should use the AIA INTC compatible string in the CPU INTC DT nodes when the CPUs support AIA feature. This will allow Linux INTC driver to use AIA local interrupt CSRs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-17-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: Remove macros for ELF BIOS image namesAnup Patel
Now that RISC-V Spike machine can use BIN BIOS images, we remove the macros used for ELF BIOS image names. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: spike: Allow using binary firmware as biosAnup Patel
Currently, we have to use OpenSBI firmware ELF as bios for the spike machine because the HTIF console requires ELF for parsing "fromhost" and "tohost" symbols. The latest OpenSBI can now optionally pick-up HTIF register address from HTIF DT node so using this feature spike machine can now use OpenSBI firmware BIN as bios. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Support start kernel directly by KVMYifei Jiang
Get kernel and fdt start address in virt.c, and pass them to KVM when cpu reset. Add kvm_riscv.h to place riscv specific interface. In addition, PLIC is created without M-mode PLIC contexts when KVM is enabled. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-id: 20220112081329.1835-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21riscv: opentitan: fixup plic stride lenWilfred Mallawa
The following change was made to rectify incorrectly set stride length on the PLIC [1]. Where it should be 32bit and not 24bit (0x18). This was discovered whilst attempting to fix a bug where a timer_interrupt was not serviced on TockOS-OpenTitan. [1] https://docs.opentitan.org/hw/top_earlgrey/ip_autogen/rv_plic/doc/ Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20220111071025.4169189-1-alistair.francis@opensource.wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08hw/riscv: Use error_fatal for SoC realisationAlistair Francis
When realising the SoC use error_fatal instead of error_abort as the process can fail and report useful information to the user. Currently a user can see this: $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash QEMU 6.1.93 monitor - type 'help' for more information (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229: qemu-system-riscv64: OTP drive size < 16K Aborted (core dumped) Which this patch addresses Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220105213937.1113508-8-alistair.francis@opensource.wdc.com>
2021-12-20hw/riscv: Use load address rather than entry point for fw_dynamic next_addrJessica Clarke
The original BBL boot method had the kernel embedded as an opaque blob that was blindly jumped to, which OpenSBI implemented as fw_payload. OpenSBI then implemented fw_jump, which allows the payload to be loaded elsewhere, but still blindly jumps to a fixed address at which the kernel is to be loaded. Finally, OpenSBI introduced fw_dynamic, which allows the previous stage to inform it where to jump to, rather than having to blindly guess like fw_jump, or embed the payload as part of the build like fw_payload. When used with an opaque binary (i.e. the output of objcopy -O binary), it matches the behaviour of the previous methods. However, when used with an ELF, QEMU currently passes on the ELF's entry point address, which causes a discrepancy compared with all the other boot methods if that entry point is not the first instruction in the binary. This difference specific to fw_dynamic with an ELF is not apparent when booting Linux, since its entry point is the first instruction in the binary. However, FreeBSD has a separate ELF entry point, following the calling convention used by its bootloader, that differs from the first instruction in the binary, used for the legacy SBI entry point, and so the specific combination of QEMU's default fw_dynamic firmware with booting FreeBSD as an ELF rather than a raw binary does not work. Thus, align the behaviour when loading an ELF with the behaviour when loading a raw binary; namely, use the base address of the loaded kernel in place of the entry point. The uImage code is left as-is in using the U-Boot header's entry point, since the calling convention for that entry point is the same as the SBI one and it mirrors what U-Boot will do. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211214032456.70203-1-jrtc27@jrtc27.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-15hw: Replace trivial drive_get_next() by drive_get()Markus Armbruster
drive_get_next() is basically a bad idea. It returns the "next" block backend of a certain interface type. "Next" means bus=0,unit=N, where subsequent calls count N up from zero, per interface type. This lets you define unit numbers implicitly by execution order. If the order changes, or new calls appear "in the middle", unit numbers change. ABI break. Hard to spot in review. A number of machines connect just one backend with drive_get_next(). Change them to use drive_get() directly. This makes the (zero) unit number explicit in the code. Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com> Cc: Niek Linnenbank <nieklinnenbank@gmail.com> Cc: Andrew Baumann <Andrew.Baumann@microsoft.com> Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Laurent Vivier <laurent@vivier.eu> Cc: qemu-arm@nongnu.org Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
2021-12-15hw/sd/ssi-sd: Do not create SD card within controller's realizeMarkus Armbruster
ssi_sd_realize() creates an "sd-card" device. This is inappropriate, and marked FIXME. Move it to the boards that create these devices. Prior art: commit eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for device "pl181". The device remains not user-creatable, because its users should (and do) wire up its GPIO chip-select line. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> Cc: qemu-arm@nongnu.org Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28hw/riscv: opentitan: Fixup the PLIC context addressesAlistair Francis
Fixup the PLIC context address to correctly support the threshold and claim register. Fixes: ef63100648 ("hw/riscv: opentitan: Update to the latest build") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211025040657.262696-1-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Use the PLIC config helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: microchip_pfsoc: Use the PLIC config helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: sifive_u: Use the PLIC config helper functionAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: boot: Add a PLIC config string functionAlistair Francis
Add a generic function that can create the PLIC strings. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Don't use a macro for the PLIC configurationAlistair Francis
Using a macro for the PLIC configuration doesn't make the code any easier to read. Instead it makes it harder to figure out what is going on, so let's remove it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
2021-10-22hw/riscv: spike: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: sifive_u: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-6-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: sifive_e: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. While at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: shakti_c: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: opentitan: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. While at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: microchip_pfsoc: Use MachineState::ram and ↵Bin Meng
MachineClass::default_ram_id Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: opentitan: Update to the latest buildAlistair Francis
Update the OpenTitan machine model to match the latest OpenTitan FPGA design. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 18b1b681b0f8dd2461e819d1217bf0b530812680.1634524691.git.alistair.francis@wdc.com
2021-10-22target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxlRichard Henderson
Shortly, the set of supported XL will not be just 32 and 64, and representing that properly using the enumeration will be imperative. Two places, booting and gdb, intentionally use misa_mxl_max to emphasize the use of the reset value of misa.mxl, and not the current cpu state. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-5-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: virt: Use machine->ram as the system memoryMingwang Li
If default main_mem is used to be registered as the system memory, other memory cannot be initialized. Therefore, the system memory should be initialized to the machine->ram, which consists of the default main_mem and other possible memory required by applications, such as shared hugepage memory in DPDK. Also, the mc->defaul_ram_id should be set to the default main_mem, such as "riscv_virt_board.ram" for the virt machine. Signed-off-by: Mingwang Li <limingwang@huawei.com> Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211016030908.40480-1-limingwang@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07hw/riscv: shakti_c: Mark as not user creatableAlistair Francis
Mark the shakti_c machine as not user creatable. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/639 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <c617a04d4e3dd041a3427b47a1b1d5ab475a2edd.1632871759.git.alistair.francis@wdc.com>
2021-09-21hw/riscv: opentitan: Correct the USB Dev addressAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: d6cb4dfe75a2f536f217d7075b750ece3acb1535.1631767043.git.alistair.francis@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Re-factor FDT generationAnup Patel
We re-factor and break the FDT generation into smaller functions so that it is easier to modify FDT generation for different configurations of virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-4-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINTAnup Patel
The RISC-V ACLINT is more modular and backward compatible with original SiFive CLINT so instead of duplicating the original SiFive CLINT implementation we upgrade the current SiFive CLINT implementation to RISC-V ACLINT implementation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-3-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Rename sifive_clint sources to riscv_aclint sourcesAnup Patel
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT implementation so let's first rename the sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21sifive_u: Connect the SiFive PWM deviceAlistair Francis
Connect the SiFive PWM device and expose it via the device tree. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 22f98648b4e012f78529a56f5ca60b0b27852a4d.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 0a76946981852f5bd15f0c37ab35b253371027a8.1630301632.git.alistair.francis@wdc.com
2021-09-01hw/riscv/virt.c: Assemble plic_hart_config string with g_strjoinv()Peter Maydell
In the riscv virt machine init function, We assemble a string plic_hart_config which is a comma-separated list of N copies of the VIRT_PLIC_HART_CONFIG string. The code that does this has a misunderstanding of the strncat() length argument. If the source string is too large strncat() will write a maximum of length+1 bytes (length bytes from the source string plus a trailing NUL), but the code here assumes that it will write only length bytes at most. This isn't an actual bug because the code has correctly precalculated the amount of memory it needs to allocate so that it will never be too small (i.e. we could have used plain old strcat()), but it does mean that the code looks like it has a guard against accidental overrun when it doesn't. Rewrite the string handling here to use the glib g_strjoinv() function, which means we don't need to do careful accountancy of string lengths, and makes it clearer that what we're doing is "create a comma-separated string". Fixes: Coverity 1460752 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210812144647.10516-1-peter.maydell@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01hw/riscv: virt: Move flash node to rootBin Meng
The flash is not inside the SoC, so it's inappropriate to put it under the /soc node. Move it to root instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210807035641.22449-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01hw/char: Add config for shakti uartVijai Kumar K
Use a dedicated UART config(CONFIG_SHAKTI_UART) to select shakti uart. Signed-off-by: Vijai Kumar K <vijai@behindbytes.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210731190229.137483-1-vijai@behindbytes.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-26arch_init.h: Don't include arch_init.h unnecessarilyPeter Maydell
arch_init.h only defines the QEMU_ARCH_* enumeration and the arch_type global. Don't include it in files that don't use those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
2021-07-20hw/riscv/Kconfig: Restrict NUMA to Virt & Spike machinesPhilippe Mathieu-Daudé
Only the Virt and Spike machines use NUMA. Add a RISCV_NUMA Kconfig symbol and only have these machines select it. Adapt the Meson file to only built it if required. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210515173716.358295-8-philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2021-07-15hw/riscv/boot: Check the error of fdt_pack()Alistair Francis
Coverity reports that we don't check the error result of fdt_pack(), so let's save the result and assert that it is 0. Fixes: Coverity CID 1458136 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 07325315b49d5555269f76094e4bc5296e0643b9.1626303527.git.alistair.francis@wdc.com
2021-07-15hw/riscv: opentitan: Add the flash aliasAlistair Francis
OpenTitan has an alias of flash avaliable which is called virtual flash. Add support for that in the QEMU model. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: c9cfbd2dd840fd0076877b8ea4d6dcfce60db5e9.1625801868.git.alistair.francis@wdc.com
2021-07-15hw/riscv: opentitan: Add the unimplement rv_core_ibex_periAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: ed707782e84118e1b06a32fd79b70fecfb54ff82.1625801868.git.alistair.francis@wdc.com
2021-07-15hw/riscv: sifive_u: Make sure firmware info is 8-byte alignedBin Meng
Currently the firmware dynamic info (fw_dyn) is put right after the reset vector, which is not 8-byte aligned on RV64. OpenSBI fw_dynamic uses ld to read contents from 'struct fw_dynamic_info', which expects fw_dyn to be on the 8-byte boundary, otherwise the misaligned load exception may happen. Fortunately this does not cause any issue on QEMU, as QEMU does support misaligned load. RV32 does not have any issue as it is 4-byte aligned already. Change to make sure it is 8-byte aligned which works for both RV32 and RV64. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210708143319.10441-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-07-15hw/riscv: sifive_u: Correct the CLINT timebase frequencyBin Meng
At present the CLINT timebase frequency is set to 10MHz on sifive_u, but on the real hardware the timebase frequency is 1Mhz. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210706102616.1922469-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-24hw/riscv: OpenTitan: Connect the mtime and mtimecmp timerAlistair Francis
Connect the Ibex timer to the OpenTitan machine. The timer can trigger the RISC-V MIE interrupt as well as a custom device interrupt. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 5e7f4e9b4537f863bcb8db1264b840b56ef2a929.1624001156.git.alistair.francis@wdc.com
2021-06-08hw/riscv: microchip_pfsoc: Support direct kernel bootBin Meng
At present the Microchip Icicle Kit machine only supports using '-bios' to load the HSS, and does not support '-kernel' for direct kernel booting just like other RISC-V machines do. One has to use U-Boot which is chain-loaded by HSS, to load a kernel for testing. This is not so convenient. Adding '-kernel' support together with the existing '-bios', we follow the following table to select which payload we execute: -bios | -kernel | payload ------+------------+-------- N | N | HSS Y | don't care | HSS N | Y | kernel This ensures backwards compatibility with how we used to expose '-bios' to users. When '-kernel' is used for direct boot, '-dtb' must be present to provide a valid device tree for the board, as we don't generate device tree. When direct kernel boot is used, the OpenSBI fw_dynamic BIOS image is used to boot a payload like U-Boot or OS kernel directly. Documentation is updated to describe the direct kernel boot. Note as of today there is still no PolarFire SoC support in the upstream Linux kernel hence the document does not include instructions for that. It will be updated in the future. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-8-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-09 04:48:55 +0000