aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv/sifive_u.c
AgeCommit message (Collapse)Author
2019-02-11riscv: Ensure the kernel start address is correctly castAlistair Francis
Cast the kernel start address to the target bit length. This ensures that we calculate the initrd offset to a valid address for the architecture. Steps to reproduce the original problem (reported by Alex): Build U-Boot for the virt machine for riscv32. Then run it with $ qemu-system-riscv32 -M virt -kernel u-boot -nographic -initrd <a file> You can find the initrd address with U-Boot# fdt addr $fdtcontroladdr U-Boot# fdt ls /chosen Then take a peek at that address: U-Boot# md.b <addr> and you will see that there is nothing there without this patch. The reason is that the binary was loaded to a negative address. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Alexander Graf <agraf@suse.de> Reported-by: Alexander Graf <agraf@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-20RISC-V: Enable second UART on sifive_e and sifive_uMichael Clark
Previously the second UARTs on the sifive_e and sifive_u machines where disabled due to check-qtest-riscv32 and check-qtest-riscv64 failures. Recent changes in the QEMU core serial code have resolved these failures so the second UARTs can be instantiated. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_u: Set 'clock-frequency' DT property for SiFive UARTAnup Patel
The 'clock-frequency' DT property is required by U-Boot to compute the divider value. This patch sets the 'clock-frequency' DT property of the SiFive UART device tree node (similar to virt machine). Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-20sifive_u: Add clock DT node for GEM ethernetAnup Patel
The GEM ethernet on SiFive unleashed has fixed input clock of 125MHz as-per SiFive FU540 manual. This patch updates FDT generation for QEMU sifive_u machine to provide fixed-rate clock for GEM ethernet. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-10-17RISC-V: Don't add NULL bootargs to device-treeMichael Clark
Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-09-24Drop "qemu:" prefix from error_report() argumentsMao Zhongyi
error_report and friends already add a "qemu-system-xxx" prefix to the string, so a "qemu:" prefix is redundant in the string. Just drop it. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1537495530-580-1-git-send-email-maozhongyi@cmss.chinamobile.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-19sifive_u: Fix crash when introspecting the deviceAlistair Francis
Use the new object_initialize_child() and sysbus_init_child_obj() to fix the issue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Clark <mjc@sifive.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-07-05hw/riscv/sifive_u: Connect the Cadence GEM Ethernet deviceAlistair Francis
Connect the Cadence GEM ethernet device. This also requires us to expose the plic interrupt lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Move the uart device tree node under /soc/Alistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Set the interrupt controller number of interruptsAlistair Francis
Set the interrupt-controller ndev to the correct number taken from the HiFive Unleashed board. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Set the soc device tree node as a simple-busAlistair Francis
To allow Linux to ennumerate devices on the /soc/ node set it as a "simple-bus". Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_plic: Use gpios instead of irqsAlistair Francis
Instead of creating the interrupt in lines with qemu_allocate_irq() use qdev_init_gpio_in() as this gives us the ability to use the qdev*gpio*() helpers later on. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-07-05hw/riscv/sifive_u: Create a SiFive U SoC objectAlistair Francis
Create a SiFive Unleashed U54 SoC and use that in the sifive_u machine. We leave the SoC, RAM, device tree and reset/fdt loading as part of the machine. All the other device creation has been moved to the SoC. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Michael Clark <mjc@sifive.com>
2018-05-06RISC-V: Mark ROM read-only after copying in codeMichael Clark
The sifive_u machine already marks its ROM readonly however it has the wrong base address for its mask ROM. This patch fixes the sifive_u mask ROM base address. This commit makes all other boards consistently use mask_rom as the variable name for their ROMs. Boards that use device tree now check that that the device tree fits in the assigned ROM space using the new qemu_fdt_totalsize(void *fdt) interface, adding a bounds check and error message. This can detect truncation. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Signed-off-by: Michael Clark <mjc@sifive.com> Reviewed-by: Alistair Francis <Alistair.Francis@wdc.com>
2018-05-06RISC-V: Remove EM_RISCV ELF_MACHINE indirectionMichael Clark
Pointless indirection. Other ports use EM_ constants directly. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove unused class definitionsMichael Clark
Removes a whole lot of unnecessary boilerplate code. Machines don't need to be objects. The expansion of the SOC object model for the RISC-V machines will happen in the future as SiFive plans to add their FE310 and FU540 SOCs to QEMU. However, it seems that this present boilerplate is complete unnecessary. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Remove identity_translate from load_elfMichael Clark
When load_elf is called with NULL as an argument to the address translate callback, it does an identity translation. This commit removes the redundant identity_translate callback. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-05-06RISC-V: Replace hardcoded constants with enum valuesMichael Clark
The RISC-V device-tree code has a number of hard-coded constants and this change moves them into header enums. Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Michael Clark <mjc@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2018-04-26Change references to serial_hds[] to serial_hd()Peter Maydell
Change all the uses of serial_hds[] to go via the new serial_hd() function. Code change produced with: find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
2018-03-07SiFive Freedom U Series RISC-V MachineMichael Clark
This provides a RISC-V Board compatible with the the SiFive Freedom U SDK. The following machine is implemented: - 'sifive_u'; CLINT, PLIC, UART, device-tree Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu> Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Michael Clark <mjc@sifive.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-20 14:31:36 +0000