aboutsummaryrefslogtreecommitdiff
path: root/hw/realview.c
AgeCommit message (Collapse)Author
2011-08-17vexpress, realview: Use pl111, not pl110Peter Maydell
The Versatile Express, Realview EB, PBX A9 and PB A8 boards all use a PL111 for their graphics, not a PL110. Now we model the PL111, use it on these board models. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-07-23Correct spelling of licensedMatthew Fernandez
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-22hw/realview.c: Remove duplicate #include linePeter Maydell
Remove a duplicate #include of sysbus.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-04-01hw/versatilepb, realview: Fix condition for instantiation of onboard NICPeter Maydell
Correct the condition determining whether we instantiate the onboard NIC or a PCI card NIC on VersatilePB and Realview boards. This was broken in two ways: (1) if the user asked for two default NICs ("-net nic -net nic") we would crash trying to strcmp() a NULL pointer (2) if the user asked for two NICs explicitly of the same model as the onboard NIC (eg "-net nic,model=smc91c111 -net nic,model=smc91c111") we would try to instantiate two onboard NICs at the same address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06target-arm: Integrate secondary CPU reset in arm_bootAdam Lackorzynski
Integrate secondary CPU reset into arm_boot, removing it from realview.c. On non-Linux systems secondary CPUs start with the same entry as the boot CPU. Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-06hw/realview: Wire up the MMC card statusPeter Maydell
Instantiate the three PL061 GPIO modules the realview boards have. Connect the MMC card status outputs of the PL181 MMC controller to both the system registers and the GPIO module which handles internal devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24Rearrange block headersBlue Swirl
Changing block.h or blockdev.h resulted in recompiling most objects. Move DriveInfo typedef and BlockInterfaceType enum definitions to qemu-common.h and rearrange blockdev.h use to decrease churn. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-04Revert "Compile usb-ohci only once"Paul Brook
This reverts commit f1698408f1dcb7548a21828a0b1e2b530fae3af3. PCI is always little-endian. Having a user-visible "be" property is just plain wrong.
2010-03-21Compile usb-ohci only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-21ARM PBX-A9 memory map tweaksPaul Brook
Add core tile memeory to the RealView PBX-A9 board. Document the memeory maps that are known to work with the qemu bootloader. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-12-04Add "static" to please SparseBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-22ARM RealView I2CPaul Brook
Add ARM Realview I2C host emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-19ARM PBX-A9 board supportPaul Brook
Implement ARM RealView PBX-A9 board support. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-16ARM PB-A8 supportPaul Brook
Add ARM Realview PB-A8 board support. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-13ARM MPCore tweaksPaul Brook
Allow the user to specify the number of cores present on the RealView EB + ARM11MPCore board. Also split into its own config rather than guessing from the CPU name. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-13Realview/EB procid hacksPaul Brook
Guess core tile ID based on CPU type. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-11-11Fix ARM MCore secondary cpu bootPaul Brook
Make MPCore secondary cpu initialization work with the new reset handling. Also change the inital FLAG value from 3 to zero to match recent kenrels. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-21Add 'static' to please SparseBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/usb: convert ohci.Gerd Hoffmann
Drop num_ports argument for usb_ohci_init_pci(), everybody calls it with num_ports == 3, so it is pointless. Convert ohci pci device into qdev. TODO: convert non-pci ohci adapters. You can add a OHCI USB Controller to your virtual pc now using '-device pci-ohci'. Specifying a id is a good idea, so you can attach usb devices to it, like this: -device pci-ohci,id=ohci -device usb-mouse,bus=ohci.0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-26Remove qdev irq sink handlingPaul Brook
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23Add common BusStatePaul Brook
Implement and use a common device bus state. The main side-effect is that creating a bus and attaching it to a parent device are no longer separate operations. For legacy code we allow a NULL parent, but that should go away eventually. Also tweak creation code to veriry theat a device in on the right bus. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14ARM GIC qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14ARM PCI host qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL080 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL190 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14ARM timers qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL181 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL031 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14LSI SCSI qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL050 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL011 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PL110 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Use guest memory access functions when setting up arm boorloader.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7053 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Use qemu_ram_alloc.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7052 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)aliguori
Add a table of PCI NIC models to pass to qemu_setup_nic_model(). While we're at it, also add a corresponding table of NIC init functions. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-28Set default max_cpus to one.balrog
Clean-up machine definitions. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-07machine struct - specify max_cpus at the per machine level (Jes Sorensen)aliguori
Introduce a max_cpus per-machine variable, allowing individual boards to limit it's number of CPUs. Check requested number of CPUs in setup code and exit if it exceeds the supported number for the machine. This also renders the static MAX_CPUS check obsolete, so remove this from vl.c. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5443 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-28Add to machine structure a flag to use SCSI drives instead of IDE: fixes SS-20blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5339 c046a42c-6fe2-441c-8c8c-71466251a162