aboutsummaryrefslogtreecommitdiff
path: root/hw/rdma/vmw
AgeCommit message (Collapse)Author
2018-12-22hw/pvrdma: Clean device's resource when system is shutdownYuval Shaia
In order to clean some external resources such as GIDs, QPs etc, register to receive notification when VM is shutdown. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Fill error code in command's responseYuval Shaia
Driver checks error code let's set it. In addition, for code simplification purposes, set response's fields ack, response and err outside of the scope of command handlers. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Fill all CQE fieldsYuval Shaia
Add ability to pass specific WC attributes to CQE such as GRH_BIT flag. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Make device state depend on Ethernet function stateYuval Shaia
User should be able to control the device by changing Ethernet function state so if user runs 'ifconfig ens3 down' the PVRDMA function should be down as well. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/rdma: Initialize node_guid from vmxnet3 mac addressYuval Shaia
node_guid should be set once device is load. Make node_guid be GID format (32 bit) of PCI function 0 vmxnet3 device's MAC. A new function was added to do the conversion. So for example the MAC 56:b6:44:e9:62:dc will be converted to GID 54b6:44ff:fee9:62dc. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Make sure PCI function 0 is vmxnet3Yuval Shaia
Guest driver enforces it, we should also. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Add support to allow guest to configure GID tableYuval Shaia
The control over the RDMA device's GID table is done by updating the device's Ethernet function addresses. Usually the first GID entry is determined by the MAC address, the second by the first IPv6 address and the third by the IPv4 address. Other entries can be added by adding more IP addresses. The opposite is the same, i.e. whenever an address is removed, the corresponding GID entry is removed. The process is done by the network and RDMA stacks. Whenever an address is added the ib_core driver is notified and calls the device driver add_gid function which in turn update the device. To support this in pvrdma device we need to hook into the create_bind and destroy_bind HW commands triggered by pvrdma driver in guest. Whenever a change is made to the pvrdma port's GID table a special QMP message is sent to be processed by libvirt to update the address of the backend Ethernet device. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Set the correct opcode for send completionYuval Shaia
opcode for WC should be set by the device and not taken from work element. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Set the correct opcode for recv completionYuval Shaia
The function pvrdma_post_cqe populates CQE entry with opcode from the given completion element. For receive operation value was not set. Fix it by setting it to IBV_WC_RECV. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Make default pkey 0xFFFFYuval Shaia
Commit 6e7dba23af ("hw/pvrdma: Make default pkey 0xFFFF") exports default pkey as external definition but omit the change from 0x7FFF to 0xFFFF. Fixes: 6e7dba23af ("hw/pvrdma: Make default pkey 0xFFFF") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Make function reset_device return voidYuval Shaia
This function cannot fail - fix it to return void Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/rdma: Add support for MAD packetsYuval Shaia
MAD (Management Datagram) packets are widely used by various modules both in kernel and in user space for example the rdma_* API which is used to create and maintain "connection" layer on top of RDMA uses several types of MAD packets. For more information please refer to chapter 13.4 in Volume 1 Architecture Specification, Release 1.1 available here: https://www.infinibandta.org/ibta-specifications-download/ To support MAD packets the device uses an external utility (contrib/rdmacm-mux) to relay packets from and to the guest driver. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/rdma: Add ability to force notification without re-armYuval Shaia
Upon completion of incoming packet the device pushes CQE to driver's RX ring and notify the driver (msix). While for data-path incoming packets the driver needs the ability to control whether it wished to receive interrupts or not, for control-path packets such as incoming MAD the driver needs to be notified anyway, it even do not need to re-arm the notification bit. Enhance the notification field to support this. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-22hw/pvrdma: Check the correct return valueYuval Shaia
Return value of 0 means ok, we want to free the memory only in case of error. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20181025061700.17050-1-yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-12-20Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the changes to the following files manually reverted: contrib/libvhost-user/libvhost-user-glib.h contrib/libvhost-user/libvhost-user.c contrib/libvhost-user/libvhost-user.h linux-user/mips64/cpu_loop.c linux-user/mips64/signal.c linux-user/sparc64/cpu_loop.c linux-user/sparc64/signal.c linux-user/x86_64/cpu_loop.c linux-user/x86_64/signal.c target/s390x/gen-features.c tests/migration/s390x/a-b-bios.c tests/test-rcu-simpleq.c tests/test-rcu-tailq.c Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181204172535.2799-1-armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Yuval Shaia <yuval.shaia@oracle.com> Acked-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
2018-08-18hw/pvrdma: remove not needed includeMarcel Apfelbaum
No need to include linux/types.h, is empty anyway. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180811171534.11917-1-marcel.apfelbaum@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-08-18hw/rdma: Add reference to pci_dev in backend_devYuval Shaia
The field backend_dev->dev is not initialized, fix it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180805153518.2983-14-yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/rdma: Bugfix - Support non-aligned buffersYuval Shaia
RDMA application can provide non-aligned buffers to be registered. In such case the DMA address passed by driver is pointing to the beginning of the physical address of the mapped page so we can't distinguish between two addresses from the same page. Fix it by keeping the offset of the virtual address in mr->virt. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-13-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/rdma: Print backend QP number in hex formatYuval Shaia
To be consistent with other prints throughout the code fix places that print it as decimal number. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-12-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/pvrdma: Cosmetic change - indent rightYuval Shaia
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-10-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/pvrdma: Make default pkey 0xFFFFYuval Shaia
0x7FFF is not the default pkey - fix it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-6-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/pvrdma: Clean CQE before useYuval Shaia
Next CQE is fetched from CQ ring, clean it before usage as it still carries old CQE values. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-5-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/rdma: Modify debug macrosYuval Shaia
- Add line counter to ease navigation in log - Print rdma instead of pvrdma Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-4-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/pvrdma: Bugfix - provide the correct attr_mask to query_qpYuval Shaia
Calling rdma_rm_query_qp with attr_mask equals to -1 leads to error where backend query_qp fails to retrieve the needed QP attributes. Fix it by providing the attr_mask we got from driver. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180805153518.2983-3-yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-08-18hw/rdma: Make distinction between device init and start modesYuval Shaia
There are certain operations that are well considered as part of device configuration while others are needed only when "start" command is triggered by the guest driver. An example of device initialization step is msix_init and example of "device start" stage is the creation of a CQ completion handler thread. Driver expects such distinction - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180805153518.2983-2-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2018-07-02hw/rdma: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180625124238.25339-40-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-03hw/rdma: Fix possible out of bounds access to regs arrayYuval Shaia
Coverity (CID1390589, CID1390608). Array size is RDMA_BAR1_REGS_SIZE, let's make sure the given address is in range. While there also: 1. Adjust the size of this bar to reasonable size 2. Report the size of the array with sizeof(array) Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180430200223.4119-6-marcel.apfelbaum@gmail.com>
2018-05-03hw/rdma: Fix possible out of bounds access to GID tableYuval Shaia
Array size is MAX_PORT_GIDS, let's make sure the given index is in range. While there limit device table size to 1. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180430200223.4119-5-marcel.apfelbaum@gmail.com>
2018-05-03hw/rdma: Delete port's pkey tableYuval Shaia
Support for PKEY is not yet implemented. Removing the unneeded table until a support will be added. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20180430200223.4119-4-marcel.apfelbaum@gmail.com>
2018-05-03hw/rdma: Fix possible usage of a NULL pointerMarcel Apfelbaum
Coverity CID 1390586; The cq handle is provided by the guest and cannot be trusted to be previuosly allocated. Fix it by exiting the completion flow. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180430200223.4119-3-marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-05-03hw/rdma: Fix possible munmap call on a NULL pointerMarcel Apfelbaum
Coverity CID 1390620: we call munmap() on a NULL pointer. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20180430200223.4119-2-marcel.apfelbaum@gmail.com>
2018-03-23hw/rdma: Fix 32-bit compilationYuval Shaia
Use the correct printf formats, so that a 32-bit compile doesn't spit out lots of warnings about %lx being incompatible with uint64_t. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-4-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: fix clang compilation errorsMarcel Apfelbaum
Fix some enum castings and extra parentheses. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180321140316.96045-1-marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-03-23rdma: fix up include directivesMichael S. Tsirkin
Our rule right now is to use <> for external headers only. RDMA code violates that, fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Add support for Query QP verb to pvrdma deviceYuval Shaia
This IB verb is needed by some applications - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-19hw/rdma: Implementation of PVRDMA deviceYuval Shaia
PVRDMA is the QEMU implementation of VMware's paravirtualized RDMA device. It works with its Linux Kernel driver AS IS, no need for any special guest modifications. While it complies with the VMware device, it can also communicate with bare metal RDMA-enabled machines and does not require an RDMA HCA in the host, it can work with Soft-RoCE (rxe). It does not require the whole guest RAM to be pinned allowing memory over-commit and, even if not implemented yet, migration support will be possible with some HW assistance. Implementation is divided into 2 components, rdma general and pvRDMA specific functions and structures. The second PVRDMA sub-module - interaction with PCI layer. - Device configuration and setup (MSIX, BARs etc). - Setup of DSR (Device Shared Resources) - Setup of device ring. - Device management. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-19hw/rdma: PVRDMA commands and data-path opsYuval Shaia
First PVRDMA sub-module - implementation of the PVRDMA device. - PVRDMA commands such as create CQ and create MR. - Data path QP operations - post_send and post_recv. - Completion handler. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-01 08:53:10 +0000