aboutsummaryrefslogtreecommitdiff
path: root/hw/qdev.h
AgeCommit message (Collapse)Author
2010-07-11qdev: implement qdev_prop_set_bit().Isaku Yamahata
implement qdev_prop_set_bit(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06qdev: Add a get_dev_path() function to BusInfoAlex Williamson
This function is meant to provide a stable device path for buses which are able to implement it. If a bus has a globally unique addresses scheme, one address level may be sufficient to provide a path. Other buses may need to recursively traverse up the qdev tree. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-02block: Catch attempt to attach multiple devices to a blockdevMarkus Armbruster
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo happily creates two SCSI disks connected to the same block device. It's all downhill from there. Device usb-storage deliberately attaches twice to the same blockdev, which fails with the fix in place. Detach before the second attach there. Also catch attempt to delete while a guest device model is attached. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02qdev: Decouple qdev_prop_drive from DriveInfoMarkus Armbruster
Make the property point to BlockDriverState, cutting out the DriveInfo middleman. This prepares the ground for block devices that don't have a DriveInfo. Currently all user-defined ones have a DriveInfo, because the only way to define one is -drive & friends (they go through drive_init()). DriveInfo is closely tied to -drive, and like -drive, it mixes information about host and guest part of the block device. I'm working towards a new way to define block devices, with clean host/guest separation, and I need to get DriveInfo out of the way for that. Fortunately, the device models are perfectly happy with BlockDriverState, except for two places: ide_drive_initfn() and scsi_disk_initfn() need to check the DriveInfo for a serial number set with legacy -drive serial=... Use drive_get_by_blockdev() there. Device model code should now use DriveInfo only when explicitly dealing with drives defined the old way, i.e. without -device. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04qdev: Move declaration of qdev_init_bdrv() into qdev.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04qdev: Don't leak string property value on hot unplugMarkus Armbruster
parse_string() qemu_strdup()s the property value. It is never freed. It needs to be freed along with the device. Otherwise, the value of scsi-disk property "ver" gets leaked when hot-unplugging the disk, for instance. Call new PropertyInfo method free() from qdev_free(). Implement it for qdev_prop_string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-04qdev: New qdev_prop_set_string()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-15vmstate: Add support for alias IDJan Kiszka
Some legacy users (mostly PC devices) of vmstate_register manage instance IDs on their own, and that unfortunately in a way that is incompatible with automatically generated ones. This so far prevents switching those users to vmstates that are registered by qdev. To establish a migration path, this patch introduces the concept of alias IDs. They can be passed to an extended vmstate registration service, and qdev provides a set service to be used during device init. find_se will consider the alias in addition to the default ID. We can then start generating the default ID automatically and writing it on vmsave, thus converting that format without breaking support for upward migration. The user is required specify the highest vmstate version for which the alias is required. Once this version falls behind the minimum required for a specific vmstate, an assertion triggers to motivate cleaning up the obsolete alias. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-23Make qemu-config available for toolsKevin Wolf
To be able to use config files for blkdebug, we need to make these functions available in the tools. This involves moving two functions that can only be built in the context of the emulator. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-18monitor: convert do_device_del() to QObject, QErrorMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-03-16monitor: convert do_device_add() to QObjectMarkus Armbruster
2010-03-08qdev: Add a DEV_NVECTORS_UNSPECIFIED enum for unspecified nr of MSI vectorsAmit Shah
net.c used a constant to signify no MSI vectors were specified. Extend that to all qdev devices. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reported-by: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03qdev: Fix exit code for -device ?Markus Armbruster
Help was shoehorned into device creation, qdev_device_add(). Since help doesn't create a device, it returns NULL, which looks to callers just like failed device creation. Monitor handler do_device_add() doesn't care, but main() exits unsuccessfully. Move help out of device creation, into new qdev_device_help(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11qdev: add bit property typeMichael S. Tsirkin
This adds "bit" property type, which is a boolean stored in a 32 bit integer field, with legal values on and off. Will be used by virtio for feature bits. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: make compat stuff more genericGerd Hoffmann
This patch renames the compat properties into global properties and makes them more generic. The compatibility stuff is only one of multiple possible users now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03qdev: move DO_UPCAST() into osdep.hMark McLoughlin
Nothing qdev specific about this, make it available throughtout. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb core: use qdev for -usbdeviceGerd Hoffmann
This patchs adds infrastructure to handle -usbdevice via qdev callbacks. USBDeviceInfo gets a name field (for the -usbdevice driver name) and a callback for -usbdevice parameter parsing. The new usbdevice_create() function walks the qdev driver list and looks for a usb driver with a matching name. When a parameter parsing callback is present it is called, otherwise the device is created via usb_create_simple(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27zap DeviceState->ndGerd Hoffmann
No users left. Also cleanup obsolete helper functions. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27qdev: add qdev_prop_exists()Gerd Hoffmann
Function test whenever a driver has a specific property. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27qdev: add vlan propertyGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27qdev: add netdev propertyGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27qdev: mac addr property fixupsGerd Hoffmann
Make the mac property use the newly added type for the mac address. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-21qdev: add string property.Gerd Hoffmann
Patchworks-ID: 35755 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-18Suppress warnings about 'warn_unused_result' attribute directiveBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-07Warn if value of qdev_init() isn't checkedMarkus Armbruster
After qdev_init() fails, the device is gone. Failure to check runs a high risk of use-after-free. Patchworks-ID: 35166 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qemu/qdev: type safety in reset handlerMichael S. Tsirkin
Add type safety to qdev reset handlers, by declaring them as DeviceState * rather than void *. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05store a pointer to QemuOpts in DeviceState, release it when zapping a device.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev hotplug: infrastructure and monitor commands.Gerd Hoffmann
Adds device_add and device_del commands. device_add accepts accepts the same syntax like the -device command line switch. device_del expects a device id. So you should tag your devices with ids if you want to remove them later on, like this: device_add pci-ohci,id=ohci device_del ohci Unplugging via pci_del or usb_del works too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Add exit callback to DeviceInfo.Gerd Hoffmann
This adds a exit callback for device destruction to DeviceInfo, so we can hook cleanups into qdev device destruction. Followup patches will put that into use. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: device free fixups.Gerd Hoffmann
Two bug fixes: * When freeing a device we unregister even stuff we didn't register in the first place because the ->init() callback failed. * When freeing a device with child busses attached, we fail to zap the child bus (and the devices attached to it). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05allow qdev busses allocations be inplaceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05qdev: Add support for uint8_tJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-25Fix spelling in commentStefan Weil
replace Convery -> Convert Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-10qdev: add property type for 32bit signed integers.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-09qdev: integrate vmstateGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev: integrate resetGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/scsi: add scsi bus support to qdev, convert drivers.Gerd Hoffmann
* Add SCSIBus. * Add SCSIDeviceInfo, move device callbacks here. * add qdev/scsi helper functions. * convert drivers. Adding scsi disks via -device works now, i.e. you can do: -drive id=sda,if=none,... -device lsi -device scsi-disk,drive=sda legacy command lines (-drive if=scsi,...) continue to work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27move useful type definitons to osdep.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10Fix virtio-blkAnthony Liguori
Reported-by: Christoph Hellwig Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10rename "info qdrv" to "info qdm"Gerd Hoffmann
As requested by avi: driver != device model. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev/prop: add CharDriverState property.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev/prop: macros for creating typechecked properties.Gerd Hoffmann
There are DEFINE_PROP_$TYPE("name", struct, field, default) macros for each property type. These macros link the qdev_prop_$name struct to the type used by that property. typeof(struct->field) is verifyed to be the correct one for the given property. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev/prop: add drive property.Gerd Hoffmann
Adds a (host) drive property, intended to be used by virtual disk backend drivers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10QemuOpts: switch over -device.Gerd Hoffmann
Make -device switch use the QemuOpts framework. Everything should continue to work like it did before. New: "-set device.$id.$property=$value" works. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-30qdev/core: add monitor command to list all driversGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27qdev: bus walker + qdev_device_add()Gerd Hoffmann
This patch implements a parser and qdev tree walker for bus paths and adds qdev_device_add on top of this. A bus path can be: (1) full path, i.e. /i440FX-pcihost/pci.0/lsi/scsi.0 (2) bus name, i.e. "scsi.0". Best used together with id= to make sure this is unique. (3) relative path starting with a bus name, i.e. "pci.0/lsi/scsi.0" For the (common) case of a single child bus being attached to a device it is enougth to specify the device only, i.e. "pci.0/lsi" will be accepted too. qdev_device_add() adds devices and accepts bus= parameters to find the bus the device should be attached to. Without bus= being specified it takes the first bus it finds where the device can be attached to (i.e. first pci bus for pci devices, ...). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 12:33:42 +0000