aboutsummaryrefslogtreecommitdiff
path: root/hw/ppce500_mpc8544ds.c
AgeCommit message (Collapse)Author
2011-05-12PPC: Qdev'ify e500 pciAlexander Graf
The e500 PCI controller isn't qdev'ified yet. This leads to severe issues when running with -drive. To be able to use a virtio disk with an e500 VM, let's convert the PCI controller over to qdev. Reviewed-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-12PPC MPC7544DS: Use new TLB helper functionAlexander Graf
Now that we have some nice helpers that can find us a TLB entry, let's use that on the machine initialization code, so we don't need to know about the internals of the TLB array. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-12PPC: Make MPC8544DS emulation work w/o KVMAlexander Graf
The MPC8544DS board emulation was only used with KVM so far, so some parts of the code didn't provide proper values for non-KVM execution. This patch makes the machine work without KVM enabled. To actually use this, you also need proper e500v2 MMU emulation. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-12PPC: Make MPC8544DS obey -cpu switchAlexander Graf
The MPC8544DS board emulation code ignored the user defined -cpu switch. This patch enables it to only provide a sane default, not force an e500v2 CPU inside. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-08Don't call cpu_synchronize_state() from machine init.Scott Wood
This will deadlock when the I/O thread is used, since the CPU thread is blocked waiting for qemu_system_ready. The synchronization is unnecessary since this is before cpu_synchronize_all_post_init(). Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-12-11isa_mmio: Always use little endianAlexander Graf
This patch converts the ISA MMIO bridge code to always use little endian mmio. All bswap code that existed was only there to convert from native cpu endianness to little endian ISA devices. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13Delete write only variablesBlue Swirl
Compiling with GCC 4.6.0 20100925 produced warnings like: /src/qemu/net/tap-win32.c: In function 'tap_win32_open': /src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable] Fix by removing the unused variables. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-21Compile serial only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile isa_mmio only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16load_elf: replace the address addend by a translation functionAurelien Jarno
A few machines need to translate the ELF header addresses into physical addresses. Currently the only possibility is to add a value to the addresses. This patch replaces the addend argument by and a translation function and an opaque passed to the function. A NULL function does not translate the address. The patch also convert all machines that have an addend, simplify the PowerPC kernel loading and fix the MIPS kernel loading using this new feature. Other machines may benefit from this feature. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27powerpc/e500: adjust fdt and ramdisk loading addrLiu Yu
Since kernel uimage is getting bigger, old fixed loading bases will result in regions overlap. Add pad for fdt and ramdisk, so that they won't overlap with uimage. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27powerpc: fix compilation with CONFIG_FDT undefinedAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27powerpc/booke: move fdt loading to rom infrastructureLiu Yu
It's convinent to use rom to checking overlap, to reset etc. And uImage and ramdisk loading has already moved to it. Also, after we add fdt to rom, free it. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27target-ppc: add synchronize register for booke initLiu Yu
So that the following registers init could be flushed back to kvm. Signed-off-by: Liu Yu <yu.liu@freescale.com> Acked-by: Hollis Blanchard <hollis@penguinppc.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile loader only onceBlue Swirl
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev-ify virtio-blk.Gerd Hoffmann
First user of the new drive property. With this patch applied host and guest config can be specified separately, like this: -drive if=none,id=disk1,file=/path/to/disk.img -device virtio-blk-pci,drive=disk1 You can set any property for virtio-blk-pci now. You can set the pci address via addr=. You can switch the device into 0.10 compat mode using class=0x0180. As this is per device you can have one 0.10 and one 0.11 virtio block device in a single virtual machine. Old syntax continues to work. Internally it does the same as the two lines above though. One side effect this has is a different initialization order, which might result in a different pci address being assigned by default. Long term plan here is to have this working for all block devices, i.e. once all scsi is properly qdev-ified you will be able to do something like this: -drive if=none,id=sda,file=/path/to/disk.img -device lsi,id=lsi,addr=<pciaddr> -device scsi-disk,drive=sda,bus=lsi.0,lun=<n> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-27Rename HAVE_FDT to CONFIG_FDT and define it also in MakefileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -drive if=virtioMarkus Armbruster
Make drive_init() accept addr=, put the value into struct DriveInfo. Use it in all the places that create virtio-blk-pci devices: pc_init1(), bamboo_init(), mpc8544ds_init(). Don't support addr= in third argument of monitor command pci_add and second argument of drive_add, because that clashes with their first arguments. Admittedly unelegant. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-30Use relative path for biosPaul Brook
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-18Separate virtio PCI codePaul Brook
Split the PCI host bindings from the VRing transport implementation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14Virtio-blk qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Wean device tree code off phys_ram_base.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7068 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10More phys_ram_base elimination.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7064 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir1
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-02kvm/powerpc: Add MPC8544DS board supportaurel32
This patch add an emulation of MPC8544DS board. It can work on All E500 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Acked-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6663 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 10:25:55 +0000