aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc_oldworld.c
AgeCommit message (Collapse)Author
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile loader only onceBlue Swirl
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/usb: convert ohci.Gerd Hoffmann
Drop num_ports argument for usb_ohci_init_pci(), everybody calls it with num_ports == 3, so it is pointless. Convert ohci pci device into qdev. TODO: convert non-pci ohci adapters. You can add a OHCI USB Controller to your virtual pc now using '-device pci-ohci'. Specifying a id is a good idea, so you can attach usb devices to it, like this: -device pci-ohci,id=ohci -device usb-mouse,bus=ohci.0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-pci.cGerd Hoffmann
create ide-pci.c and place pci bus support there. only build ide-pci support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Fix build (merge with isa mmio split)
2009-08-16Replace REGX with PRIx64Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08ppc_oldworld: configure screen size from qemu command line optionsLaurent Vivier
This patch uses the FW_CFG interface to send user requested screen size and depth to openbios. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31Fix Sparse warnings: "Using plain integer as NULL pointer"Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-26PPC: Round VGA BIOS size to page boundaryAlexander Graf
When giving KVM a slot of a size not on page boundary, it chokes. So let's just round up the VGA BIOS size so nobody complains anymore and we don't need to implement sub-page slots. Required for booting a PPC guest in KVM. Signed-off-by: Alexander Graf <agraf@suse.de>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-30Use relative path for biosPaul Brook
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Introduce is_default field for QEMUMachineAnthony Liguori
f80f9ec changed the order that machines are registered which had the effect of changing the default machine. This changeset introduces a new is_default field so that machine types can declare that they are the default for an architecture. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Clean up VGA ram allocation.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10More phys_ram_base removal.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7060 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Use load_image_targphys and avoid phys_ram_base.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Use firmware configuration instead of NVRAM (initial patch by Aurelien Jarno)blueswir1
Use firmware configuration device for boot device, kernel, initrd and kernel command line parameters on PPC, Sparc32 and Sparc64. Update OpenBIOS images to r479 which supports the change. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6777 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07ppc_oldworld: swap the MACIO and CMD646 IDE controllersaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6763 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Load 32 bit ELF BIOS images also on PPC64blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6554 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-07Add it_shiftblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6547 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01Update #defines for PCI vendor and device IDs from OpenBIOS and Linuxblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-30PowerPC: IDE DB-DMA supportaurel32
This patches allows powermac IDE interface to use DB-DMA. This implementation uses only synchronous I/O. Signed-off-by: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6489 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-30PowerPC: mac-io DB-DMA supportaurel32
This patch adds powermac Descriptor-Based DMA. It is used by mac-io based IDE, ethernet, sounds and serial devices. Signed-off-by: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6488 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26target-ppc: always load kernel to KERNEL_LOAD_ADDRaurel32
Linux changed its physical address location in the elf header from 0xc0000000 to 0 on 2.6.25, causing later kernels to fail booting with the -kernel option. This patch assures that the lowest segment in the elf binary is loaded to KERNEL_LOAD_ADDR, which is where the firmware expects it. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6437 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-24Fix kernel_size and initrd_size sign (Francois Revol)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6415 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16ppc_oldworld: remove i8259aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6348 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16ppc_oldworld: remove debug I/O portaurel32
This is specific to OpenHackware, and not used by OpenBIOS. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6347 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14PPC OldWorld: use a more realistic timer frequencyaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6296 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14escc: allow one IRQ per serial channelaurel32
The Z85C30 on the PowerMAC machines have one interrupt per serial channel, while the Sparc machines have only one for both. Allow the emulated device to use one IRQ per channel. Patch by Laurent Vivier. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6295 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Make pci_nic_init() use qemu_setup_nic_model() (Mark McLoughlin)aliguori
Add a table of PCI NIC models to pass to qemu_setup_nic_model(). While we're at it, also add a corresponding table of NIC init functions. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6287 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13target-ppc: define max amount of memory for G3 beigeaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6283 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13target-ppc: fix comment about boot device in ppc_oldworld.caurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6282 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-12Use ESCC for PowerMac serialblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6271 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-09target-ppc: revert part of commit r6254 committed accidentallyaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6257 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add v{add, sub}{s, u}{b, h, w}s instructionsaurel32
Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6254 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08target-ppc: move OpenBIOS machines type to ppc.h from hw/ppc_oldworld.caurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6231 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Some more updates for the g3bw -> g3beige changeaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6230 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07target-ppc: Switch ppc_oldworld.c to G3 beigeaurel32
The G3 B&W is a new world machine. The machine currently implemented is actually closer to a G3 beige. Also swith the MacIO from Paddigton (new world) to Heathrow (old world). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6228 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-24Fix kernel loadingblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6131 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-24Use the firmware configuration deviceblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6130 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-24Use OpenBIOS for g3bw machineblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6128 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 00:46:58 +0000