aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc_newworld.c
AgeCommit message (Collapse)Author
2010-04-04Revert "Compile usb-ohci only once"Paul Brook
This reverts commit f1698408f1dcb7548a21828a0b1e2b530fae3af3. PCI is always little-endian. Having a user-visible "be" property is just plain wrong.
2010-03-21Compile usb-ohci only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile isa_mmio only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16load_elf: replace the address addend by a translation functionAurelien Jarno
A few machines need to translate the ELF header addresses into physical addresses. Currently the only possibility is to add a value to the addresses. This patch replaces the addend argument by and a translation function and an opaque passed to the function. A NULL function does not translate the address. The patch also convert all machines that have an addend, simplify the PowerPC kernel loading and fix the MIPS kernel loading using this new feature. Other machines may benefit from this feature. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-04KVM: Rework VCPU state writeback APIJan Kiszka
This grand cleanup drops all reset and vmsave/load related synchronization points in favor of four(!) generic hooks: - cpu_synchronize_all_states in qemu_savevm_state_complete (initial sync from kernel before vmsave) - cpu_synchronize_all_post_init in qemu_loadvm_state (writeback after vmload) - cpu_synchronize_all_post_init in main after machine init - cpu_synchronize_all_post_reset in qemu_system_reset (writeback after system reset) These writeback points + the existing one of VCPU exec after cpu_synchronize_state map on three levels of writeback: - KVM_PUT_RUNTIME_STATE (during runtime, other VCPUs continue to run) - KVM_PUT_RESET_STATE (on synchronous system reset, all VCPUs stopped) - KVM_PUT_FULL_STATE (on init or vmload, all VCPUs stopped as well) This level is passed to the arch-specific VCPU state writing function that will decide which concrete substates need to be written. That way, no writer of load, save or reset functions that interact with in-kernel KVM states will ever have to worry about synchronization again. That also means that a lot of reasons for races, segfaults and deadlocks are eliminated. cpu_synchronize_state remains untouched, just as Anthony suggested. We continue to need it before reading or writing of VCPU states that are also tracked by in-kernel KVM subsystems. Consequently, this patch removes many cpu_synchronize_state calls that are now redundant, just like remaining explicit register syncs. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-02-14PPC: Add USB per default on U3Alexander Graf
Linux with CONFIG_PPC64 doesn't support ADB devices anymore, so we have to use USB for keyboard and mouse. This patch enables USB per default on U3 and adds a virtual keyboard and mouse there. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Use macio IDE controller for NewworldAlexander Graf
Per default Linux doesn't come with a lot of storage adapters enabled on Mac configurations. The one that's pretty much always present is the pmac-ide, while the cmd64x is almost never included in any distribution. So let's switch to use the MacIO based IDE controller. There is corresponding OpenBIOS code to get interrupts working properly. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: tell the guest about the time base frequencyAlexander Graf
Our guest systems need to know by how much the timebase increases every second, so there usually is a "timebase-frequency" property in the cpu leaf of the device tree. This property is missing in OpenBIOS. With qemu, Linux's fallback timebase speed and qemu's internal timebase speed match up. With KVM, that is no longer true. The guest is running at the same timebase speed as the host. This leads to massive timing problems. On my test machine, a "sleep 2" takes about 14 seconds with KVM enabled. This patch exports the timebase frequency to OpenBIOS, so it can then put them into the device tree. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Include dump of lspci -nn on real G5Alexander Graf
To ease debugging and to know what we're lacking, I found it really useful to have an lspci dump of a real U3 based G5 around. So I added a comment for it. If people don't think it's important enough to include this information in the sources, just don't apply this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Use Mac99_U3 type on ppc64Alexander Graf
The "Mac99" type so far defines a "U2" based configuration. Unfortunately, there have never been any U2 based PPC64 machines. That's what the U3 was developed for. So let's split the Mac99 machine in a PPC64 and a PPC32 machine. The PPC32 machine stays "Mac99", while the PPC64 one becomes "Mac99_U3". All peripherals stay the same. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-21ppc64: Change default machine to mac99Andreas Färber
Also change the New World default CPU to 970FX for ppc64, since the G4 is a 32-bit CPU. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-19target-ppc: Use interrupts for esccAlexander Graf
When using the escc with Linux, we need interrupts. So instead of creating a dummy device, let's just map them to the openpic we have anyways. This makes Linux on PPC64 with console=ttyPZ0 work. Obviously, this change needs to be reflected in openbios. Patch for that follows this one. Please update the binary then. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03targe-ppc: Sync CPU state for KVMAlexander Graf
Some recent change made PPC guests always start at address 0x0 because env isn't synced to kvm_state on first bootup. I'm not sure if this is the correct bugfix, but at least it makes PPC boot again with KVM enabled. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-07PPC: rename cpu_ppc_reset to cpu_reset for consistencyBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-12rom loader: fix sparc -kernel boot.Gerd Hoffmann
Changes: (1) register pstrcpy_targphys() in rom list, it is used for kernel command lines by a number of architectures. (2) add rom_ptr() function to get a pointer for applying changes to loaded images. Needed for example to tell the linux kernel where it finds the initrd image by updating the header. (3) make sparc use rom_ptr for initrd setup. booting sparc-test works now, and 'info roms' shows this: (qemu) info roms addr=0000000000000000 size=0x2a3828 mem=ram name="phdr #0: vmlinux-2.6.11+tcx" addr=00000000007ff000 size=0x00000e mem=ram name="cmdline" addr=0000000000800000 size=0x400000 mem=ram name="/root/qemu-test/sparc-test/linux.img" addr=0000000070000000 size=0x0e4000 mem=rom name="phdr #0: /home/kraxel/projects/qemu/build-zfull/pc-bios/openbios-sparc32" reboot via 'system_reset' works too. Patchworks-ID: 35262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Fix pci_add nic not to exit on bad modelMarkus Armbruster
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to create the NIC. When MODEL is unknown or "?", this prints to stderr and terminates the program. Change pci_nic_init() not to treat "?" specially, and to return NULL on failure. Switch uses during startup to new convenience wrapper pci_nic_init_nofail(), which behaves just like pci_nic_init() used to do. Bonus bug fix: we now check for qdev_init() failing there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile loader only onceBlue Swirl
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/usb: convert ohci.Gerd Hoffmann
Drop num_ports argument for usb_ohci_init_pci(), everybody calls it with num_ports == 3, so it is pointless. Convert ohci pci device into qdev. TODO: convert non-pci ohci adapters. You can add a OHCI USB Controller to your virtual pc now using '-device pci-ohci'. Specifying a id is a good idea, so you can attach usb devices to it, like this: -device pci-ohci,id=ohci -device usb-mouse,bus=ohci.0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-pci.cGerd Hoffmann
create ide-pci.c and place pci bus support there. only build ide-pci support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Fix build (merge with isa mmio split)
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-08ppc_newworld: configure screen size from QEMU command line optionsBlue Swirl
Use the FW_CFG interface to send user requested screen size and depth to OpenBIOS like 7f1aec5f93382eef75920899f4065613aeaf02a2 for ppc_oldworld. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-31Fix Sparse warnings: "Using plain integer as NULL pointer"Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-26PPC: Round VGA BIOS size to page boundaryAlexander Graf
When giving KVM a slot of a size not on page boundary, it chokes. So let's just round up the VGA BIOS size so nobody complains anymore and we don't need to implement sub-page slots. Required for booting a PPC guest in KVM. Signed-off-by: Alexander Graf <agraf@suse.de>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-30Use relative path for biosPaul Brook
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Clean up VGA ram allocation.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10More phys_ram_base removal.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7060 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Use firmware configuration instead of NVRAM (initial patch by Aurelien Jarno)blueswir1
Use firmware configuration device for boot device, kernel, initrd and kernel command line parameters on PPC, Sparc32 and Sparc64. Update OpenBIOS images to r479 which supports the change. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6777 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-02kvm/powerpc: Enable MPIC for E500 platform.aurel32
MPIC and OpenPIC have very similar design. So a lot of code can be reused. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6659 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09ppc newworld: default to a G4 CPUaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6581 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Use Mac NVRAMblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6561 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Switch Mac99 to OpenBIOSblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6560 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Use CMD646 IDE for nowblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6555 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Load 32 bit ELF BIOS images also on PPC64blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6554 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-08Rename ppc_chrp.c to ppc_newworld.cblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6553 c046a42c-6fe2-441c-8c8c-71466251a162