aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc
AgeCommit message (Collapse)Author
2019-03-21virtio-vga: only enable for specific boardsPaolo Bonzini
When virtio-vga was added, the intention was to only support it for those machines where the firmware does not know about virtio-gpu, and supported VGA legacy hardware before virtio-{gpu,vga} were introduced. The Kconfig switch however enabled virtio-vga for all machines with a PCI bus, and libvirt then prefers it even on hardware where virtio-gpu would be preferrable. At least for now, only enable virtio-vga for PC, hppa and pSeries machines, as was the case before Kconfig dependencies were introduced. Reported-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20hw/ppc/Kconfig: e500 based machines require virtio-net-pci devicePhilippe Mathieu-Daudé
This fixes when configuring with CONFIG_PCI_DEVICES=n: $ qemu-system-ppc64 -bios /dev/null -M ppce500 qemu-system-ppc64: Unsupported NIC model: virtio-net-pci And: $ qemu-system-ppc64 -bios /dev/null -M mpc8544ds qemu-system-ppc64: Unsupported NIC model: virtio-net-pci Fixes: 98bd1db99f Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190316200818.8265-10-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20hw/ppc/Kconfig: Bamboo machine requires e1000 network cardPhilippe Mathieu-Daudé
This fixes when configuring with CONFIG_PCI_DEVICES=n: $ qemu-system-ppc64 -bios /dev/null -M bamboo qemu-system-ppc64: Unsupported NIC model: e1000 Fixes: 7c28b925b7e Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190316200818.8265-9-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20prep: do not select I82374Paolo Bonzini
It is only needed through I82378, which also selects it. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-18kconfig: add CONFIG_MSI_NONBROKENPaolo Bonzini
Not all interrupt controllers have a working implementation of message-signalled interrupts; in some cases, the guest may expect MSI to work but it won't due to the buggy or lacking emulation. In QEMU this is represented by the "msi_nonbroken" variable. This patch adds a new configuration symbol enabled whenever the binary contains an interrupt controller that will set "msi_nonbroken". We can then use it to remove devices that cannot be possibly added to the machine, because they require MSI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12Merge remote-tracking branch 'remotes/armbru/tags/pull-pflash-2019-03-11' ↵Peter Maydell
into staging Pflash and firmware configuration patches for 2019-03-11 # gpg: Signature made Mon 11 Mar 2019 21:59:12 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-pflash-2019-03-11: (27 commits) docs/interop/firmware.json: Prefer -machine to if=pflash pc: Support firmware configuration with -blockdev pc_sysfw: Pass PCMachineState to pc_system_firmware_init() pc_sysfw: Remove unused PcSysFwDevice pflash_cfi01: Add pflash_cfi01_get_blk() helper vl: Create block backends before setting machine properties vl: Factor configure_blockdev() out of main() vl: Improve legibility of BlockdevOptions queue sysbus: Fix latent bug with onboard devices vl: Fix latent bug with -global and onboard devices qom: Move compat_props machinery from qdev to QOM qdev: Fix latent bug with compat_props and onboard devices pflash: Clean up after commit 368a354f02b, part 2 pflash: Clean up after commit 368a354f02b, part 1 mips_malta: Clean up definition of flash memory size somewhat hw/mips/malta: Restrict 'bios_size' variable scope hw/mips/malta: Remove fl_sectors variable mips_malta: Delete disabled, broken DEBUG_BOARD_INIT code r2d: Fix flash memory size, sector size, width, device ID ppc405_boards: Don't size flash memory to match backing image ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12spapr: Use CamelCase properlyDavid Gibson
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9Cédric Le Goater
Activate only stop0 and stop1 levels. We should not need more levels when under QEMU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-15-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add more dummy XSCOM addressesCédric Le Goater
To improve OPAL/skiboot support. We don't need to strictly model these XSCOM accesses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: POWER9 XSCOM quad supportCédric Le Goater
The POWER9 processor does not support per-core frequency control. The cores are arranged in groups of four, along with their respective L2 and L3 caches, into a structure known as a Quad. The frequency must be managed at the Quad level. Provide a basic Quad model to fake the settings done by the firmware on the Non-Cacheable Unit (NCU). Each core pair (EX) needs a special BAR setting for the TIMA area of XIVE because it resides on the same address on all chips. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: extend XSCOM core support for POWER9Cédric Le Goater
Provide a new class attribute to define XSCOM operations per CPU family and add a couple of XSCOM addresses controlling the power management states of the core on POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model for POWER9Cédric Le Goater
The OCC on POWER9 is very similar to the one found on POWER8. Provide the same routines with P9 values for the registers and IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model classCédric Le Goater
To ease the introduction of the OCC model for POWER9, provide a new class attributes to define XSCOM operations per CPU family and a PSI IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add SerIRQ routing registersCédric Le Goater
This is just a simple reminder that SerIRQ routing should be addressed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller model for POWER9Cédric Le Goater
The LPC Controller on POWER9 is very similar to the one found on POWER8 but accesses are now done via on MMIOs, without the XSCOM and ECCB logic. The device tree is populated differently so we add a specific POWER9 routine for the purpose. SerIRQ routing is yet to be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a 'dt_isa_nodename' to the chipCédric Le Goater
The ISA bus has a different DT nodename on POWER9. Compute the name when the PnvChip is realized, that is before it is used by the machine to populate the device tree with the ISA devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller class modelCédric Le Goater
It will ease the introduction of the LPC Controller model for POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: lpc: fix OPB address rangesCédric Le Goater
The PowerNV LPC Controller exposes different sets of registers for each of the functional units it encompasses, among which the OPB (On-Chip Peripheral Bus) Master and Arbitrer and the LPC HOST Controller. The mapping addresses of each register range are correct but the sizes are too large. Fix the sizes and define the OPB Arbitrer range to fill the gap between the OPB Master registers and the LPC HOST Controller registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge model for POWER9Cédric Le Goater
The PSI bridge on POWER9 is very similar to POWER8. The BAR is still set through XSCOM but the controls are now entirely done with MMIOs. More interrupts are defined and the interrupt controller interface has changed to XIVE. The POWER9 model is a first example of the usage of the notify() handler of the XiveNotifier interface, linking the PSI XiveSource to its owning device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge class modelCédric Le Goater
To ease the introduction of the PSI bridge model for POWER9, abstract the POWER chip differences in a PnvPsi class model and introduce a specific Pnv8Psi type for POWER8. POWER8 interface to the interrupt controller is still XICS whereas POWER9 uses the new XIVE model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_newworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland
FWPathProvider When using -drive to configure the hd drive for the New World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_oldworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland
FWPathProvider When using -drive to configure the hd drive for the Old World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12spapr_iommu: Do not replay mappings from just created DMA windowAlexey Kardashevskiy
On sPAPR vfio_listener_region_add() is called in 2 situations: 1. a new listener is registered from vfio_connect_container(); 2. a new IOMMU Memory Region is added from rtas_ibm_create_pe_dma_window(). In both cases vfio_listener_region_add() calls memory_region_iommu_replay() to notify newly registered IOMMU notifiers about existing mappings which is totally desirable for case 1. However for case 2 it is nothing but noop as the window has just been created and has no valid mappings so replaying those does not do anything. It is barely noticeable with usual guests but if the window happens to be really big, such no-op replay might take minutes and trigger RCU stall warnings in the guest. For example, a upcoming GPU RAM memory region mapped at 64TiB (right after SPAPR_PCI_LIMIT) causes a 64bit DMA window to be at least 128TiB which is (128<<40)/0x10000=2.147.483.648 TCEs to replay. This mitigates the problem by adding an "skipping_replay" flag to sPAPRTCETable and defining sPAPR own IOMMU MR replay() hook which does exactly the same thing as the generic one except it returns early if @skipping_replay==true. Another way of fixing this would be delaying replay till the very first H_PUT_TCE but this does not work if in-kernel H_PUT_TCE handler is enabled (a likely case). When "ibm,create-pe-dma-window" is complete, the guest will map only required regions of the huge DMA window. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190307050518.64968-2-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a reset handlerCédric Le Goater
Reset all regs but keep the MMIO BAR enabled as it is at realize time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a PSIHB_REG macroCédric Le Goater
This is a simple helper to translate XSCOM addresses to MMIO addresses Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: fix logging primitives using OxCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new pic_print_info() operation to the chip modelCédric Le Goater
The POWER9 and POWER8 processors have different interrupt controllers, and reporting their state requires calling different helper routines. However, the interrupt presenters are still handled in the higher level pic_print_info() routine because they are not related to the chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new dt_populate() operation to the chip modelCédric Le Goater
The POWER9 and POWER8 processors have a different set of devices and a different device tree layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a XIVE interrupt controller model for POWER9Cédric Le Goater
This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: change the CPU machine_data presenter type to Object *Cédric Le Goater
The POWER9 PowerNV machine will use a XIVE interrupt presenter type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc: externalize ppc_get_vcpu_by_pir()Cédric Le Goater
We will use it to get the CPU interrupt presenter in XIVE when the TIMA is accessed from the indirect page. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12PPC: E500: Add FSL I2C controller and integrate RTC with itAndrew Randrianasulu
Original commit message: This patch adds an emulation model for i2c controller found on most of the FSL SoCs. It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model. Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com> see http://patchwork.ozlabs.org/patch/431475/ I only fixed it enough for application on top of current qemu master 20b084c4b1401b7f8fbc385649d48c67b6f43d44, and hopefully fixed checkpatch errors Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need network time protocol daemon because it will have working RTC (before all timestamps on files were from 2016) Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com> Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com> [dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable H_PAGE_INIT in-kernel handlingSuraj Jitindar Singh
The H_CALL H_PAGE_INIT can be used to zero or copy a page of guest memory. Enable the in-kernel H_PAGE_INIT handler. The in-kernel handler takes half the time to complete compared to handling the H_CALL in userspace. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190306060608.19935-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Clear partition table entry when allocating hash tableSuraj Jitindar Singh
If we allocate a hash page table then we know that the guest won't be using process tables, so set the partition table entry maintained for the guest to zero. If this isn't done, then the guest radix bit will remain set in the entry. This means that when the guest calls H_REGISTER_PROCESS_TABLE there will be a mismatch between then flags and the value in spapr->patb_entry, and the call will fail. The guest will then panic: Failed to register process table (rc=-4) kernel BUG at arch/powerpc/platforms/pseries/lpar.c:959 The result being that it isn't possible to boot a hash guest on a P9 system. Also fix a bug in the flags parsing in h_register_process_table() which was introduced by the same patch, and simplify the handling to make it less likely that errors will be introduced in the future. The effect would have been setting the host radix bit LPCR_HR for a hash guest using process tables, which currently isn't supported and so couldn't have been triggered. Fixes: 00fd075e18 "target/ppc/spapr: Set LPCR:HR when using Radix mode" Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190305022102.17610-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable mitigations by default for pseries-4.0 machine typeSuraj Jitindar Singh
There are currently 3 mitigations the availability of which is controlled by the spapr-caps mechanism, cap-cfpc, cap-sbbc, and cap-ibs. Enable these mitigations by default for the pseries-4.0 machine type. By now machine firmware should have been upgraded to allow these settings. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-3-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/tcg: make spapr_caps apply cap-[cfpc/sbbc/ibs] non-fatal for tcgSuraj Jitindar Singh
The spapr_caps cap-cfpc, cap-sbbc and cap-ibs are used to control the availability of certain mitigations to the guest. These haven't been implemented under TCG, it is unlikely they ever will be, and it is unclear as to whether they even need to be. As such, make failure to apply these capabilities under TCG non-fatal. Instead we print a warning message to the user but still allow the guest to continue. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-2-sjitindarsingh@gmail.com> [dwg: Small style fix] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add SPAPR_CAP_CCF_ASSISTSuraj Jitindar Singh
Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate the requirement for a hw-assisted version of the count cache flush workaround. The count cache flush workaround is a software workaround which can be used to flush the count cache on context switch. Some revisions of hardware may have a hardware accelerated flush, in which case the software flush can be shortened. This cap is used to set the availability of such hardware acceleration for the count cache flush routine. The availability of such hardware acceleration is indicated by the H_CPU_CHAR_BCCTR_FLUSH_ASSIST flag being set in the characteristics returned from the KVM_PPC_GET_CPU_CHAR ioctl. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301031912.28809-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add workaround option to SPAPR_CAP_IBSSuraj Jitindar Singh
The spapr_cap SPAPR_CAP_IBS is used to indicate the level of capability for mitigations for indirect branch speculation. Currently the available values are broken (default), fixed-ibs (fixed by serialising indirect branches) and fixed-ccd (fixed by diabling the count cache). Introduce a new value for this capability denoted workaround, meaning that software can work around the issue by flushing the count cache on context switch. This option is available if the hypervisor sets the H_CPU_BEHAV_FLUSH_COUNT_CACHE flag in the cpu behaviours returned from the KVM_PPC_GET_CPU_CHAR ioctl. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301031912.28809-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable the large decrementer for pseries-4.0Suraj Jitindar Singh
Enable the large decrementer by default for the pseries-4.0 machine type. It is disabled again by default_caps_with_cpu() for pre-POWER9 cpus since they don't support the large decrementer. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301024317.22137-4-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc: Implement large decrementer support for KVMSuraj Jitindar Singh
Implement support to allow KVM guests to take advantage of the large decrementer introduced on POWER9 cpus. To determine if the host can support the requested large decrementer size, we check it matches that specified in the ibm,dec-bits device-tree property. We also need to enable it in KVM by setting the LPCR_LD bit in the LPCR. Note that to do this we need to try and set the bit, then read it back to check the host allowed us to set it, if so we can use it but if we were unable to set it the host cannot support it and we must not use the large decrementer. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190301024317.22137-3-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc: Implement large decrementer support for TCGSuraj Jitindar Singh
Prior to POWER9 the decrementer was a 32-bit register which decremented with each tick of the timebase. From POWER9 onwards the decrementer can be set to operate in a mode called large decrementer where it acts as a n-bit decrementing register which is visible as a 64-bit register, that is the value of the decrementer is sign extended to 64 bits (where n is implementation dependant). The mode in which the decrementer operates is controlled by the LPCR_LD bit in the logical paritition control register (LPCR). >From POWER9 onwards the HDEC (hypervisor decrementer) was enlarged to h-bits, also sign extended to 64 bits (where h is implementation dependant). Note this isn't configurable and is always enabled. On POWER9 the large decrementer and hdec are both 56 bits, as represented by the lrg_decr_bits cpu class property. Since they are the same size we only add one property for now, which could be extended in the case they ever differ in the future. We also add the lrg_decr_bits property for POWER5+/7/8 since it is used to determine the size of the hdec, which is only generated on the POWER5+ processor and later. On these processors it is 32 bits. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190301024317.22137-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add SPAPR_CAP_LARGE_DECREMENTERSuraj Jitindar Singh
Add spapr_cap SPAPR_CAP_LARGE_DECREMENTER to be used to control the availability of the large decrementer for a guest. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301024317.22137-1-sjitindarsingh@gmail.com> [dwg: Trivial style fix] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12Revert "spapr: support memory unplug for qtest"Greg Kurz
Commit b8165118f52c broke CPU hotplug tests for old machine types: $ QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 ./tests/cpu-plug-test -m=slow /ppc64/cpu-plug/pseries-3.1/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.12-sxxm/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-3.0/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.10/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.11/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.12/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.9/device-add/2x3x1&maxcpus=6: OK /ppc64/cpu-plug/pseries-2.7/device-add/2x3x1&maxcpus=6: ** ERROR:/home/thuth/devel/qemu/hw/ppc/spapr_events.c:313:rtas_event_log_to_source: assertion failed: (source->enabled) Broken pipe /home/thuth/devel/qemu/tests/libqtest.c:143: kill_qemu() detected QEMU death from signal 6 (Aborted) (core dumped) Aborted (core dumped) The approach of faking the availability of OV5_HP_EVT causes the code to assume the hotplug event source is enabled, which is wrong for older machines. We've now fixed CAS under qtest with a different approach. Therefore, this reverts commit b8165118f52ce5ee88565d3cec83d30374efdc96. A subsequent patch will address the problem of CAS under qtest from a different angle. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155146875097.147873.1732264036668112686.stgit@bahia.lan> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12spapr: Simulate CAS for qtestGreg Kurz
The RTAS event hotplug code for machine types 2.8 and newer depends on the CAS negotiated ov5 in order to work properly. However, there's no CAS when running under qtest. There has been a tentative to trick the code by faking the OV5_HP_EVT bit, but it turned out to break other assumptions in the code and the change got reverted. Go for a more general approach and simulate a CAS when running under qtest. For simplicity, this pseudo CAS simple simulates the case where the guest supports the same features as the machine. It is done at reset time, just before we reset the DRCs, which could potentially exercise the unplug code. This allows to test unplug on spapr with both older and newer machine types. Suggested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155146875704.147873.10563808578795890265.stgit@bahia.lan> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-11pflash: Clean up after commit 368a354f02b, part 2Markus Armbruster
Our pflash devices are simplistically modelled has having "num-blocks" sectors of equal size "sector-length". Real hardware commonly has sectors of different sizes. How our "sector-length" property is related to the physical device's multiple sector sizes is unclear. Helper functions pflash_cfi01_register() and pflash_cfi02_register() create a pflash device, set properties including "sector-length" and "num-blocks", and realize. They take parameters @size, @sector_len and @nb_blocs. QOMification left parameter @size unused. Obviously, @size should match @sector_len and @nb_blocs, i.e. size == sector_len * nb_blocs. All callers satisfy this. Remove @nb_blocs and compute it from @size and @sector_len. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-16-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-11pflash: Clean up after commit 368a354f02b, part 1Markus Armbruster
QOMification left parameter @qdev unused in pflash_cfi01_register() and pflash_cfi02_register(). All callers pass NULL. Remove. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-15-armbru@redhat.com>
2019-03-11ppc405_boards: Don't size flash memory to match backing imageMarkus Armbruster
Machine "ref405ep" maps its flash memory at address 2^32 - image size. Image size is rounded up to the next multiple of 64KiB. Useless, because pflash_cfi02_realize() fails with "failed to read the initial flash content" unless the rounding is a no-op. If the image size exceeds 0x80000 Bytes, we overlap first SRAM, then other stuff. No idea how that would play out, but useful outcomes seem unlikely. Map the flash memory at fixed address 0xFFF80000 with size 512KiB, regardless of image size, to match the physical hardware. Machine "taihu" maps its boot flash memory similarly. The code even has a comment /* XXX: should check that size is 2MB */, followed by disabled code to adjust the size to 2MiB regardless of image size. Its code to map its application flash memory looks the same, except there the XXX comment asks for 32MiB, and the code to adjust the size isn't disabled. Note that pflash_cfi02_realize() fails with "failed to read the initial flash content" for images smaller than 32MiB. Map the boot flash memory at fixed address 0xFFE00000 with size 2MiB, to match the physical hardware. Delete dead code from application flash mapping, and simplify some. Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-9-armbru@redhat.com>
2019-03-11ppc405_boards: Delete stale, disabled DEBUG_BOARD_INIT codeMarkus Armbruster
The disabled DEBUG_BOARD_INIT code goes back to the initial commit 1a6c0886203, and has since seen only mechanical updates. It sure feels like useless clutter now. Delete it. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190308094610.21210-8-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-03-11sam460ex: Don't size flash memory to match backing imageMarkus Armbruster
Machine "sam460ex" maps its flash memory at address 0xFFF00000. When no image is supplied, its size is 1MiB (0x100000), and 512KiB of ROM get mapped on top of its second half. Else, it's the size of the image rounded up to the next multiple of 64KiB. The rounding is actually useless: pflash_cfi01_realize() fails with "failed to read the initial flash content" unless it's a no-op. I have no idea what happens when the pflash's size exceeds 1MiB. Useful outcomes seem unlikely. I guess memory at the end of the address space remains unmapped when it's smaller than 1MiB. Again, useful outcomes seem unlikely. The physical hardware appears to have 512KiB of flash memory: https://eu.mouser.com/datasheet/2/268/atmel_AT49BV040B-1180330.pdf For now, just set the flash memory size to 1MiB regardless of image size, and document the mess. Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/huth-gitlab/tags/pull-request-2019-03-08' into staging - qtest fixes - Some generic clean-ups by Philippe - macOS CI testing via cirrus-ci.com # gpg: Signature made Fri 08 Mar 2019 08:58:47 GMT # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/huth-gitlab/tags/pull-request-2019-03-08: cirrus.yml: Add macOS continuous integration task tests/bios-tables: Improve portability by searching bash in the $PATH vhost-user-test: fix leaks tests: Do not use "\n" in g_test_message() strings hw/devices: Remove unused TC6393XB_RAM definition hw: Remove unused 'hw/devices.h' include tests: Move qdict-test-data.txt to tests/data/qobject/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # tests/vhost-user-test.c
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 03:02:38 +0000