| Age | Commit message (Collapse) | Author |
|---|
|
so that it would be possible to increase maxcpus limit
for x86 target. Keep spapr/virt_arm at limit they used
to have 255.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Currently, the MMIO space for accessing PCI on pseries guests begins at
1 TiB in guest address space. Each PCI host bridge (PHB) has a 64 GiB
chunk of address space in which it places its outbound PIO and 32-bit and
64-bit MMIO windows.
This scheme as several problems:
- It limits guest RAM to 1 TiB (though we have a limited fix for this
now)
- It limits the total MMIO window to 64 GiB. This is not always enough
for some of the large nVidia GPGPU cards
- Putting all the windows into a single 64 GiB area means that naturally
aligning things within there will waste more address space.
In addition there was a miscalculation in some of the defaults, which meant
that the MMIO windows for each PHB actually slightly overran the 64 GiB
region for that PHB. We got away without nasty consequences because
the overrun fit within an unused area at the beginning of the next PHB's
region, but it's not pretty.
This patch implements a new scheme which addresses those problems, and is
also closer to what bare metal hardware and pHyp guests generally use.
Because some guest versions (including most current distro kernels) can't
access PCI MMIO above 64 TiB, we put all the PCI windows between 32 TiB and
64 TiB. This is broken into 1 TiB chunks. The first 1 TiB contains the
PIO (64 kiB) and 32-bit MMIO (2 GiB) windows for all of the PHBs. Each
subsequent TiB chunk contains a naturally aligned 64-bit MMIO window for
one PHB each.
This reduces the number of allowed PHBs (without full manual configuration
of all the windows) from 256 to 31, but this should still be plenty in
practice.
We also change some of the default window sizes for manually configured
PHBs to saner values.
Finally we adjust some tests and libqos so that it correctly uses the new
default locations. Ideally it would parse the device tree given to the
guest, but that's a more complex problem for another time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
On real hardware, and under pHyp, the PCI host bridges on Power machines
typically advertise two outbound MMIO windows from the guest's physical
memory space to PCI memory space:
- A 32-bit window which maps onto 2GiB..4GiB in the PCI address space
- A 64-bit window which maps onto a large region somewhere high in PCI
address space (traditionally this used an identity mapping from guest
physical address to PCI address, but that's not always the case)
The qemu implementation in spapr-pci-host-bridge, however, only supports a
single outbound MMIO window, however. At least some Linux versions expect
the two windows however, so we arranged this window to map onto the PCI
memory space from 2 GiB..~64 GiB, then advertised it as two contiguous
windows, the "32-bit" window from 2G..4G and the "64-bit" window from
4G..~64G.
This approach means, however, that the 64G window is not naturally aligned.
In turn this limits the size of the largest BAR we can map (which does have
to be naturally aligned) to roughly half of the total window. With some
large nVidia GPGPU cards which have huge memory BARs, this is starting to
be a problem.
This patch adds true support for separate 32-bit and 64-bit outbound MMIO
windows to the spapr-pci-host-bridge implementation, each of which can
be independently configured. The 32-bit window always maps to 2G.. in PCI
space, but the PCI address of the 64-bit window can be configured (it
defaults to the same as the guest physical address).
So as not to break possible existing configurations, as long as a 64-bit
window is not specified, a large single window can be specified. This
will appear the same way to the guest as the old approach, although it's
now implemented by two contiguous memory regions rather than a single one.
For now, this only adds the possibility of 64-bit windows. The default
configuration still uses the legacy mode.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
Currently the default PCI host bridge for the 'pseries' machine type is
constructed with its IO windows in the 1TiB..(1TiB + 64GiB) range in
guest memory space. This means that if > 1TiB of guest RAM is specified,
the RAM will collide with the PCI IO windows, causing serious problems.
Problems won't be obvious until guest RAM goes a bit beyond 1TiB, because
there's a little unused space at the bottom of the area reserved for PCI,
but essentially this means that > 1TiB of RAM has never worked with the
pseries machine type.
This patch fixes this by altering the placement of PHBs on large-RAM VMs.
Instead of always placing the first PHB at 1TiB, it is placed at the next
1 TiB boundary after the maximum RAM address.
Technically, this changes behaviour in a migration-breaking way for
existing machines with > 1TiB maximum memory, but since having > 1 TiB
memory was broken anyway, this seems like a reasonable trade-off.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
The 'spapr-pci-host-bridge' represents the virtual PCI host bridge (PHB)
for a PAPR guest. Unlike on x86, it's routine on Power (both bare metal
and PAPR guests) to have numerous independent PHBs, each controlling a
separate PCI domain.
There are two ways of configuring the spapr-pci-host-bridge device: first
it can be done fully manually, specifying the locations and sizes of all
the IO windows. This gives the most control, but is very awkward with 6
mandatory parameters. Alternatively just an "index" can be specified
which essentially selects from an array of predefined PHB locations.
The PHB at index 0 is automatically created as the default PHB.
The current set of default locations causes some problems for guests with
large RAM (> 1 TiB) or PCI devices with very large BARs (e.g. big nVidia
GPGPU cards via VFIO). Obviously, for migration we can only change the
locations on a new machine type, however.
This is awkward, because the placement is currently decided within the
spapr-pci-host-bridge code, so it breaks abstraction to look inside the
machine type version.
So, this patch delegates the "default mode" PHB placement from the
spapr-pci-host-bridge device back to the machine type via a public method
in sPAPRMachineClass. It's still a bit ugly, but it's about the best we
can do.
For now, this just changes where the calculation is done. It doesn't
change the actual location of the host bridges, or any other behaviour.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
restore xirr_owner after migration and move restoring to
icp_post_load]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Rather than machine instances having backward-compatible option
defaults that need to be repeatedly re-enabled for every new machine
type we introduce, we set the defaults appropriate for newer machine
types, then add code to explicitly disable instance options as needed
to maintain compatibility with older machine types.
Currently pseries-2.5 does not inherit from pseries-2.6 in this
fashion, which is okay at the moment since we do not have any
instance compatibility options for pseries-2.6+ currently.
We will make use of this in future patches though, so fix it here.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[dwg: Extended to make 2.7 inherit from 2.8 as well]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Replace repeated pattern
for (i = 0; i < nb_numa_nodes; i++) {
if (test_bit(idx, numa_info[i].node_cpu)) {
...
break;
with a helper function to lookup numa node index for cpu.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A couple of distributors are compiling their distributions
with "-mcpu=power8" for ppc64le these days, so the user sooner
or later runs into a crash there when not explicitely specifying
the "-cpu POWER8" option to QEMU (which is currently using POWER7
for the "pseries" machine by default). Due to this reason, the
linux-user target already switched to POWER8 a while ago (see commit
de3f1b98410e0d5b406a0df3a48547b559d18602). Since the softmmu target
of course has the same problem, we should switch there to POWER8 for
the newer machine types, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
If the user passes an alias name and a property to -cpu, QEMU fails to
find the CPU definition and exits.
$ qemu-system-ppc64 -cpu POWER8E,compat=power7
qemu-system-ppc64: Unable to find sPAPR CPU Core definition
This happens because spapr_get_cpu_core_type() passes the full string from
the command line (i.e. "POWER8E,compat=power7") to ppc_cpu_lookup_alias(),
instead of the alias name piece only (i.e. "POWER8E").
The fix is to pass model_pieces[0] to ppc_cpu_lookup_alias().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
KVM-PR currently does not support transactional memory, and the
implementation in TCG is just a fake. We should not announce TM
support in the ibm,pa-features property when running on such a
system, so disable it by default and only enable it if the KVM
implementation supports it (i.e. recent versions of KVM-HV).
These changes are based on some earlier work from Anton Blanchard
(thanks!).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The current code uses pa_features_206 for POWERPC_MMU_2_06, and
for everything else, it uses pa_features_207. This is bad in some
cases because there is also a "degraded" MMU version of ISA 2.06,
called POWERPC_MMU_2_06a, which should of course use the flags for
2.06 instead. And there is also the possibility that the user runs
the pseries machine with a POWER5+ or even 970 processor. In that
case we certainly do not want to set the flags for 2.07, and rather
simply skip the setting of the pa-features property instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The function spapr_populate_cpu_dt() has become quite big
already, and since we likely have to extend the pa-features
property for every new processor generation, it is nicer
if we put the related code into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Now that 2.7 is released, create the pseries-2.8 machine type and add the
boilerplate compatiblity macro stuff. There's nothing new to put into the
2.7 compatiliby properties yet, but we'll need something eventually, so
we might as well get it ready now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
* thread-safe tb_flush (Fred, Alex, Sergey, me, Richard, Emilio,... :-)
* license clarification for compiler.h (Felipe)
* glib cflags improvement (Marc-André)
* checkpatch silencing (Paolo)
* SMRAM migration fix (Paolo)
* Replay improvements (Pavel)
* IOMMU notifier improvements (Peter)
* IOAPIC now defaults to version 0x20 (Peter)
# gpg: Signature made Tue 27 Sep 2016 10:57:40 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
replay: allow replay stopping and restarting
replay: vmstate for replay module
replay: move internal data to the structure
cpus-common: lock-free fast path for cpu_exec_start/end
tcg: Make tb_flush() thread safe
cpus-common: Introduce async_safe_run_on_cpu()
cpus-common: simplify locking for start_exclusive/end_exclusive
cpus-common: remove redundant call to exclusive_idle()
cpus-common: always defer async_run_on_cpu work items
docs: include formal model for TCG exclusive sections
cpus-common: move exclusive work infrastructure from linux-user
cpus-common: fix uninitialized variable use in run_on_cpu
cpus-common: move CPU work item management to common code
cpus-common: move CPU list management to common code
linux-user: Add qemu_cpu_is_self() and qemu_cpu_kick()
linux-user: Use QemuMutex and QemuCond
cpus: Rename flush_queued_work()
cpus: Move common code out of {async_, }run_on_cpu()
cpus: pass CPUState to run_on_cpu helpers
build-sys: put glib_cflags in QEMU_CFLAGS
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Functions of type FindSysbusDeviceFunc currently return an integer.
However, this return value is always ignored by the caller in
find_sysbus_device().
This changes the function type to return void, to avoid confusion over
the function semantics.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
CPUState is a fairly common pointer to pass to these helpers. This means
if you need other arguments for the async_run_on_cpu case you end up
having to do a g_malloc to stuff additional data into the routine. For
the current users this isn't a massive deal but for MTTCG this gets
cumbersome when the only other parameter is often an address.
This adds the typedef run_on_cpu_func for helper functions which has an
explicit CPUState * passed as the first parameter. All the users of
run_on_cpu and async_run_on_cpu have had their helpers updated to use
CPUState where available.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[Sergey Fedorov:
- eliminate more CPUState in user data;
- remove unnecessary user data passing;
- fix target-s390x/kvm.c and target-s390x/misc_helper.c]
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> (s390 parts)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1470158864-17651-3-git-send-email-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The new interface can be used to replace the old notify_started() and
notify_stopped(). Meanwhile it provides explicit flags so that IOMMUs
can know what kind of notifications it is requested for.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1474606948-14391-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
into staging
ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922. There was a clang
build error in that, and I've also added one extra patch in the new pull.
Included in this set of ppc and spapr patches are:
* TCG implementations for more POWER9 instructions
* Some preliminary XICS fixes in preparataion for the pnv machine type
* A significant ADB (Macintosh kbd/mouse) cleanup
* Some conversions to use trace instead of debug macros
* Fixes to correctly handle global TLB flush synchronization in
TCG. This is already a bug, but it will have much more impact
when we get MTTCG
* Add more qtest testcases for Power
* Some MAINTAINERS updates
* Assorted bugfixes
* Add the basics of NUMA associativity to the spapr PCI host bridge
This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.
# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
spapr_pci: Add numa node id
monitor: fix crash for platforms without a CPU 0
linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
ppc/kvm: Mark 64kB page size support as disabled if not available
ppc/xics: An ICS with offset 0 is assumed to be uninitialized
ppc/xics: account correct irq status
Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
target-ppc: tlbie/tlbivax should have global effect
target-ppc: add flag in check_tlb_flush()
target-ppc: add TLB_NEED_LOCAL_FLUSH flag
spapr: Introduce sPAPRCPUCoreClass
target-ppc: implement darn instruction
target-ppc: add stxsi[bh]x instruction
target-ppc: add lxsi[bw]zx instruction
target-ppc: add xxspltib instruction
target-ppc: consolidate store conditional
target-ppc: move out stqcx impementation
target-ppc: consolidate load with reservation
target-ppc: convert st[16,32,64]r to use new macro
target-ppc: convert st64 to use new macro
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
|
|
This adds a numa id property to a PHB to allow linking passed PCI device
to CPU/memory. It is up to the management stack to do CPU/memory pinning
to the node with the actual PCI device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[dwg: Renamed property from "node" to "numa_node" to match the similar
one in the pxb device]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
These are mandatory per PAPR and available on Linux 4.3 and newer kernels. The calls in question are required to run FreeBSD guests with reasonable performance, so enable them if possible.
Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org>
[dwg: Added a stub to fix compile without KVM (e.g. on x86 host)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
tlbie (BookS) and tlbivax (BookE) plus the H_CALLs(pseries) should have
a global effect.
Introduces TLB_NEED_GLOBAL_FLUSH flag. During lazy tlb flush, after
taking care of pending local flushes, check broadcast flush(at context
synchronizing event ptesync/tlbsync, etc) is needed. Depending on the
bitmask state of the tlb_need_flush, tlb is flushed from other cpus if
needed and the flags are cleared.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Use 'true' instead of '1' for call to check_tlb_flush()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
We flush the qemu TLB lazily. check_tlb_flush is called whenever we hit
a context synchronizing event or instruction that requires a pending
flush to be performed.
However, we fail to handle broadcast TLB flush operations. In order to
fix that efficiently, we want to differentiate whether check_tlb_flush()
needs to only apply pending local flushes (isync instructions,
interrupts, ...) or also global pending flush operations. The latter is
only needed when executing instructions that are defined architecturally
as synchronizing global TLB flush operations. This in our case is
ptesync on BookS and tlbsync on BookE along with the paravirtualized
hypervisor calls.
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[dwg: Changed gen_check_tlb_flush() to also take a bool, and fixed
some spelling errors in commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Each spapr cpu core type defines an instance_init routine which just
populates the CPU class name. This can be done in the class_init
commonly for all core types which simplifies the registration.
This is inspired by how PowerNV core types are registered.
Certain types of spapr cpu cores ('host' and generic type based on host
CPU) are initialized in target-ppc/kvm.c. To convert these type
registrations to use class_init, we need to expose
spapr_cpu_core_class_init() outside of spapr_cpu_core.c.
Commit d11b268e1765 added a generic sPAPR CPU core family
type to support cases like POWER8 CPU type on POWER8E host CPU.
Switching to class_init would fix such scenarios to use the right
CPU thread type instead of defaulting to host-powerpc64-cpu.
In an unrelated cleanup, fix a typo in .get_hotplug_handler routine.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Add a first test to validate the protocol:
- rtas/get-time-of-day compares the time
from the guest with the time from the host.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The exact same routine will be used in PowerNV.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
spapr_pci would also be a good candidate but the macro _FDT is
slightly different. It returns and does not exit.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
into staging
ppc patch queue for 2016-08-15
Just a single patch here, I hope this is the last ppc / spapr fix to
squeeze into qemu-2.7.
# gpg: Signature made Mon 15 Aug 2016 07:46:36 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.7-20160815:
ppc: parse cpu features once
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Considering that features are converted to global properties and
global properties are automatically applied to every new instance
of created CPU (at object_new() time), there is no point in
parsing cpu_model string every time a CPU created. So move
parsing outside CPU creation loop and do it only once.
Parsing also should be done before any CPU is created so that
features would affect the first CPU a well.
This patch does that for all PowerPC machine types.
It is based on previous work from Bharata:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg07564.html
Signed-off-by: Greg Kurz <groug@kaod.org>
[clg: only kept the fix for the spapr platform. support for other
platform will be added in 2.8 ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Documentation is docs/tracing.txt instead of docs/trace-events.txt.
find . -name trace-events -exec \
sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
{} \;
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Hard-coding the CPU alias names in the spapr_cores[] array has
two big disadvantages:
1) We register a real type with the CPU alias name in
spapr_cpu_core_register_types() - this prevents us from registering
a CPU family name in kvm_ppc_register_host_cpu_type() with the same
name (as we do it for the non-hotpluggable CPU types).
2) It's quite cumbersome to maintain the aliases here in sync with the
ppc_cpu_aliases list from target-ppc/cpu-models.c.
So let's simply add proper alias lookup to the spapr cpu core code,
too (by checking whether the given model can be used directly, and
if not by trying to look up the given model as an alias name instead).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The sPAPR CPU core typename is already available in the upper
block. Let's use it and move the check upward also.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
into staging
Error reporting patches for 2016-08-08
# gpg: Signature made Mon 08 Aug 2016 08:14:49 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2016-08-08:
error: Fix error_printf() calls lacking newlines
vfio: Use error_report() instead of error_printf() for errors
checkpatch: Fix newline detection in error_setg() & friends
error: Strip trailing '\n' from error string arguments (again)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back. checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it. Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
When a TCE table (sPAPR IOMMU context) is in disabled state (which is true
by default for the 64-bit window), it has tcet->nb_table == 0 and
tcet->table == NULL. However, on system reset, spapr_tce_reset() executes,
which unconditionally calls
memset(tcet->table, 0, table_size);
We get away with this in practice, because it's a zero length memset(),
but memset() on a NULL pointer is undefined behaviour, so we should not
call it in this case.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Prior to c8721d3 "spapr: Error out when CPU hotplug is attempted on older
pseries machines", attempting to use query-hotpluggable-cpus on pseries-2.6
and earlier machine types would SEGV.
That change fixed that, but due to some unexpected interactions in init
order and a brown-paper-bag worthy failure to test, it accidentally
disabled query-hotpluggable-cpus for all pseries machine types, including
the current one which should allow it.
In fact, query_hotpluggable_cpus needs to be non-NULL when and only when
the dr_cpu_enabled flag in sPAPRMachineClass is set, which makes
dr_cpu_enabled itself redundant.
This patch removes dr_cpu_enabled, instead directly setting
query_hotpluggable_cpus from the machine class_init functions, and using
that to determine the availability of CPU hotplug when necessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
CPU hotplug and coldplug aren't supported prior to pseries-2.7. Further,
earlier machine types don't use CPU core objects at all. These mean that
query-hotpluggable-cpus and coldplug on older pseries machines will crash
QEMU. It also means that hotpluggable_cpus flag in query-machines will
be incorrectly set to true for pseries < 2.7, since it is based on the
presence of the query_hotpluggable_cpus hook.
- Don't assign the query_hotpluggable_cpus hook for pseries < 2.7
- query_hotpluggable_cpus should therefore never be called on pseries <
2.7, so add an assert
- spapr_core_pre_plug() should fail hot/cold plug attempts for pseries <
2.7, since core objects are never used there
- spapr_core_plug() should therefore never be called for pseries < 2.7, so
add an assert.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Change from query_hotpluggable_cpus returning NULL for pseries < 2.7
to not being called at all, reword commit message for accuracy]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Boot CPU is assumed to be always present in QEMU code. So
until that assumptions are gone, deny removal request.
In another words, QEMU won't support boot CPU core hot-unplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
[dwg: Tweaked error message for clarity]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
order"
This reverts commit 5cbc64de25973e9129c5a7897734a06ac64b9aff.
Now that we have stable cpu_index values for pseries-2.7 (and future)
machine types, we can now safely allow hotplug and unplug in any order.
Conflicts:
hw/ppc/spapr_cpu_core.c
Some conflicts on revert due to some small changes in the inserted
code since the original commit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
It will enshure that cpu_index for a given cpu stays the same
regardless of the order cpus has been created/deleted and so
it would be possible to migrate QEMU instance with out of order
created CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The goal of this patch is to have a stable core-id which does not depend
on any DT related semantics, which involve non-obvious computations on
modern PowerPC server cpus.
With this patch, the DT core id is computed on-demand as:
(core-id / smp_threads) * smt
where smt is the number of threads per core in the host.
This formula should be consolidated in a helper since it is needed in
several places.
Other uses for core-id includes: compute a stable cpu_index (which
allows random order hotplug/unplug without breaking migration) and
NUMA.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
When canceling a migration process, we currently do not close the
HTAB migration file descriptor since htab_save_complete() is never
called in that case. So we leave the migration process with a
dangling htab_fd value around, and this causes any further migration
attempts to fail. To fix this issue, simply make sure that the
htab_fd is closed during the migration cleanup stage. And since the
cleanup() function is also called when migration succeeds, we can
also remove the call to close_htab_fd() from the htab_save_complete()
function.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354341
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
If CPU core addition or removal is allowed in random order leading to
holes in the core id range (and hence in the cpu_index range), migration
can fail as migration with holes in cpu_index range isn't yet handled
correctly.
Prevent this situation by enforcing the addition in contiguous order
and removal in LIFO order so that we never end up with holes in
cpu_index range.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
If the host has 8 threads/core and the guest is started with:
-smp cores=1,threads=4,maxcpus=12
It is possible to crash QEMU by doing:
(qemu) device_add host-spapr-cpu-core,core-id=16,id=foo
(qemu) device_del foo
Segmentation fault
This happens because spapr_core_unplug() assumes cpu_dt_id == core_id.
As long as cpu_dt_id is derived from the non-table cpu_index, this is
only true when you plug cores with contiguous ids.
It is safer to be consistent: the DR connector was created with an
index that is immediately written to cc->core_id, and spapr_core_plug()
also relies on cc->core_id.
Let's use it also in spapr_core_unplug().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
