aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc
AgeCommit message (Collapse)Author
2019-04-12spapr_pci: Fix broken naming of PCI busGreg Kurz
Recent commit 5cf0d326a0fe fixed a regression which was preventing the guest to access the extended config space of a PCIe device. This was done by introducing a new PCI bus subtype for PAPR. The original fix was causing PCI busses to be named "spapr-pci-host-bridge-root-bus.N" instead of "pci.N", which was making upper layers unhappy of course. This got worked around by hardcoding the PCI bus name to "pci.0", but this only works for the default PHB. And we're now hitting: # qemu-system-ppc64 \ -device spapr-pci-host-bridge,index=1 \ -device e1000e,bus=pci.0 \ -device e1000e,bus=pci.1 qemu-system-ppc64: -device e1000e,bus=pci.1: Bus 'pci.1' not found David already posted some patches [1] to control PCI extended config space accesses with a new flag in the base PCI bus class instead of subtyping. These patches are a bit more intrusive though, and are targetted for 4.1. When no name is passed to pci_register_bus(), the core device code generates a lowercase name based on the QOM typename. The typename for the base PCI bus class is "PCI", hence the "pci.0", "pci.1" bus names. Rename the type of the PAPR PCI bus to "pci", so that the QOM code can generate proper names. This is a hack but it is enough to fix the regression. And all this will be reworked properly in 4.1. [1] https://patchwork.ozlabs.org/project/qemu-devel/list/?series=100486 Fixes: 5cf0d326a0fe Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155500034416.646888.1307366522340665522.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-09spapr_pci: Fix extended config space accessesGreg Kurz
The PAPR PHB acts as a legacy PCI bus but it allows PCIe extended config space accesses anyway (for pseries-2.9 and newer machine types). Introduce a specific PCI bus subtype to inform the common PCI code about that. Fixes: c2077e2ca0da7 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155414130834.574858.16502276132110219890.stgit@bahia.lan> [dwg: Apply fix so we don't rename the default pci bus, breaking everything] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-29spapr/irq: Add XIVE sanity checks on non-P9 machinesCédric Le Goater
On non-P9 machines, the XIVE interrupt mode is not advertised, see spapr_dt_ov5_platform_support(). Add a couple of checks on the machine configuration to filter bogus setups and prevent OS failures : Interrupt modes CPU/Compat XICS XIVE dual P8/P8 OK QEMU failure (1) OK (3) P9/P8 OK QEMU failure (2) OK (3) P9/P9 OK OK OK (1) CPU exception model is incompatible with XIVE and the presenters will fail to realize. (2) CPU exception model is compatible with XIVE, but the XIVE CAS advertisement is dropped when in POWER8 mode. So we could ended up booting with the XIVE DT properties but without the HCALLs. Avoid confusing Linux with such settings and fail under QEMU. (3) force XICS in machine init Remove the check on XIVE-only machines in spapr_machine_init(), which has now become redundant. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190328100044.11408-1-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-29spapr: Simplify handling of host-serial and host-model valuesDavid Gibson
27461d69a0f "ppc: add host-serial and host-model machine attributes (CVE-2019-8934)" introduced 'host-serial' and 'host-model' machine properties for spapr to explicitly control the values advertised to the guest in device tree properties with the same names. The previous behaviour on KVM was to unconditionally populate the device tree with the real host serial number and model, which leaks possibly sensitive information about the host to the guest. To maintain compatibility for old machine types, we allowed those props to be set to "passthrough" to take the value from the host as before. Or they could be set to "none" to explicitly omit the device tree items. Special casing specific values on what's otherwise a user supplied string is very ugly. So, this patch simplifies things by implementing the backwards compatibility in a different way: we have a machine class flag set for the older machines, and we only load the host values into the device tree if A) they're not set by the user and B) we have that flag set. This does mean that the "passthrough" functionality is no longer available with the current machine type. That's ok though: if a user or management layer really wants the information passed through they can read it themselves (OpenStack Nova already does something similar for x86). It also means the user can't explicitly ask for the values to be omitted on the old machine types. I think that's an acceptable trade-off: if you care enough about not leaking the host information you can either move to the new machine type, or use a dummy value for the properties. For the new machine type, this also removes an odd inconsistency between running on a POWER and non-POWER (or non-Linux) hosts: if the host information couldn't be read from where we expect (in the host's device tree as exposed by Linux), we'd fallback to omitting the guest device tree items. While we're there, improve some poorly worded comments, and the help text for the properties. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
2019-03-29target/ppc: Consolidate 64-bit server processor detection in a helperGreg Kurz
We use PPC_SEGMENT_64B in various places to guard code that is specific to 64-bit server processors compliant with arch 2.x. Consolidate the logic in a helper macro with an explicit name. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155327783157.1283071.3747129891004927299.stgit@bahia.lan> Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Delete unused trace pointsMarkus Armbruster
Tracked down with cleanup-trace-events.pl. Funnies requiring manual post-processing: * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-5-armbru@redhat.com Message-Id: <20190314180929.27722-5-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-21virtio-vga: only enable for specific boardsPaolo Bonzini
When virtio-vga was added, the intention was to only support it for those machines where the firmware does not know about virtio-gpu, and supported VGA legacy hardware before virtio-{gpu,vga} were introduced. The Kconfig switch however enabled virtio-vga for all machines with a PCI bus, and libvirt then prefers it even on hardware where virtio-gpu would be preferrable. At least for now, only enable virtio-vga for PC, hppa and pSeries machines, as was the case before Kconfig dependencies were introduced. Reported-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20hw/ppc/Kconfig: e500 based machines require virtio-net-pci devicePhilippe Mathieu-Daudé
This fixes when configuring with CONFIG_PCI_DEVICES=n: $ qemu-system-ppc64 -bios /dev/null -M ppce500 qemu-system-ppc64: Unsupported NIC model: virtio-net-pci And: $ qemu-system-ppc64 -bios /dev/null -M mpc8544ds qemu-system-ppc64: Unsupported NIC model: virtio-net-pci Fixes: 98bd1db99f Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190316200818.8265-10-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20hw/ppc/Kconfig: Bamboo machine requires e1000 network cardPhilippe Mathieu-Daudé
This fixes when configuring with CONFIG_PCI_DEVICES=n: $ qemu-system-ppc64 -bios /dev/null -M bamboo qemu-system-ppc64: Unsupported NIC model: e1000 Fixes: 7c28b925b7e Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190316200818.8265-9-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-20prep: do not select I82374Paolo Bonzini
It is only needed through I82378, which also selects it. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-19spapr: Remove NULL checks on error_propagate() callsMarkus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir . --in-place Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190318190148.18283-1-armbru@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19ppc/pnv: Fix variable size in pnv_psi_power9_irq_set()Greg Kurz
PSI registers are 64-bit. Spotted by Coverity: CID 1399704 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155248884690.893204.5428179144527749023.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19ppc/pnv: Use local_err variable in pnv_chip_power9_intc_create()Greg Kurz
Detected by Coverity: CID 1399702 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155248884129.893204.2293309859485638162.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-19spapr: Correctly set LPCR[GTSE] in H_REGISTER_PROCESS_TABLEDavid Gibson
176dccee "target/ppc/spapr: Clear partition table entry when allocating hash table" reworked the H_REGISTER_PROCESS_TABLE hypercall, but unfortunately due to a small error no longer correctly sets the LPCR[GTSE] bit which allows the guest to directly execute (some types of) tlbie (TLB flush) instructions without involving the hypervisor. We got away with this, initially, because POWER9 did not have hypervisor mode enabled in its msr_mask, which meant we didn't actually run hypervisor privilege checks in TCG at all. However, da874d90 "target/ppc: add HV support for POWER9" turned on HV support on POWER9 for the benefit of the powernv machine type. This exposed the earlier bug in H_REGISTER_PROCESS_TABLE, and causes guests which rely on LPCR[GTSE] (i.e. basically all of them) to crash during early boot when their first tlbie instruction causes an unexpected trap. Fixes: 176dccee target/ppc/spapr: Clear partition table entry when allocating hash table Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Cleber Rosa <crosa@redhat.com>
2019-03-18kconfig: add CONFIG_MSI_NONBROKENPaolo Bonzini
Not all interrupt controllers have a working implementation of message-signalled interrupts; in some cases, the guest may expect MSI to work but it won't due to the buggy or lacking emulation. In QEMU this is represented by the "msi_nonbroken" variable. This patch adds a new configuration symbol enabled whenever the binary contains an interrupt controller that will set "msi_nonbroken". We can then use it to remove devices that cannot be possibly added to the machine, because they require MSI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12Merge remote-tracking branch 'remotes/armbru/tags/pull-pflash-2019-03-11' ↵Peter Maydell
into staging Pflash and firmware configuration patches for 2019-03-11 # gpg: Signature made Mon 11 Mar 2019 21:59:12 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-pflash-2019-03-11: (27 commits) docs/interop/firmware.json: Prefer -machine to if=pflash pc: Support firmware configuration with -blockdev pc_sysfw: Pass PCMachineState to pc_system_firmware_init() pc_sysfw: Remove unused PcSysFwDevice pflash_cfi01: Add pflash_cfi01_get_blk() helper vl: Create block backends before setting machine properties vl: Factor configure_blockdev() out of main() vl: Improve legibility of BlockdevOptions queue sysbus: Fix latent bug with onboard devices vl: Fix latent bug with -global and onboard devices qom: Move compat_props machinery from qdev to QOM qdev: Fix latent bug with compat_props and onboard devices pflash: Clean up after commit 368a354f02b, part 2 pflash: Clean up after commit 368a354f02b, part 1 mips_malta: Clean up definition of flash memory size somewhat hw/mips/malta: Restrict 'bios_size' variable scope hw/mips/malta: Remove fl_sectors variable mips_malta: Delete disabled, broken DEBUG_BOARD_INIT code r2d: Fix flash memory size, sector size, width, device ID ppc405_boards: Don't size flash memory to match backing image ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12spapr: Use CamelCase properlyDavid Gibson
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a "ibm,opal/power-mgt" device tree node on POWER9Cédric Le Goater
Activate only stop0 and stop1 levels. We should not need more levels when under QEMU. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-15-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add more dummy XSCOM addressesCédric Le Goater
To improve OPAL/skiboot support. We don't need to strictly model these XSCOM accesses. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: POWER9 XSCOM quad supportCédric Le Goater
The POWER9 processor does not support per-core frequency control. The cores are arranged in groups of four, along with their respective L2 and L3 caches, into a structure known as a Quad. The frequency must be managed at the Quad level. Provide a basic Quad model to fake the settings done by the firmware on the Non-Cacheable Unit (NCU). Each core pair (EX) needs a special BAR setting for the TIMA area of XIVE because it resides on the same address on all chips. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: extend XSCOM core support for POWER9Cédric Le Goater
Provide a new class attribute to define XSCOM operations per CPU family and add a couple of XSCOM addresses controlling the power management states of the core on POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-11-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model for POWER9Cédric Le Goater
The OCC on POWER9 is very similar to the one found on POWER8. Provide the same routines with P9 values for the registers and IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a OCC model classCédric Le Goater
To ease the introduction of the OCC model for POWER9, provide a new class attributes to define XSCOM operations per CPU family and a PSI IRQ number. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add SerIRQ routing registersCédric Le Goater
This is just a simple reminder that SerIRQ routing should be addressed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller model for POWER9Cédric Le Goater
The LPC Controller on POWER9 is very similar to the one found on POWER8 but accesses are now done via on MMIOs, without the XSCOM and ECCB logic. The device tree is populated differently so we add a specific POWER9 routine for the purpose. SerIRQ routing is yet to be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a 'dt_isa_nodename' to the chipCédric Le Goater
The ISA bus has a different DT nodename on POWER9. Compute the name when the PnvChip is realized, that is before it is used by the machine to populate the device tree with the ISA devices. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller class modelCédric Le Goater
It will ease the introduction of the LPC Controller model for POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: lpc: fix OPB address rangesCédric Le Goater
The PowerNV LPC Controller exposes different sets of registers for each of the functional units it encompasses, among which the OPB (On-Chip Peripheral Bus) Master and Arbitrer and the LPC HOST Controller. The mapping addresses of each register range are correct but the sizes are too large. Fix the sizes and define the OPB Arbitrer range to fill the gap between the OPB Master registers and the LPC HOST Controller registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge model for POWER9Cédric Le Goater
The PSI bridge on POWER9 is very similar to POWER8. The BAR is still set through XSCOM but the controls are now entirely done with MMIOs. More interrupts are defined and the interrupt controller interface has changed to XIVE. The POWER9 model is a first example of the usage of the notify() handler of the XiveNotifier interface, linking the PSI XiveSource to its owning device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge class modelCédric Le Goater
To ease the introduction of the PSI bridge model for POWER9, abstract the POWER chip differences in a PnvPsi class model and introduce a specific Pnv8Psi type for POWER8. POWER8 interface to the interrupt controller is still XICS whereas POWER9 uses the new XIVE model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_newworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland
FWPathProvider When using -drive to configure the hd drive for the New World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12mac_oldworld: use node name instead of alias name for hd device in ↵Mark Cave-Ayland
FWPathProvider When using -drive to configure the hd drive for the Old World machine, the node name "disk" should be used instead of the "hd" alias. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190307212058.4890-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12spapr_iommu: Do not replay mappings from just created DMA windowAlexey Kardashevskiy
On sPAPR vfio_listener_region_add() is called in 2 situations: 1. a new listener is registered from vfio_connect_container(); 2. a new IOMMU Memory Region is added from rtas_ibm_create_pe_dma_window(). In both cases vfio_listener_region_add() calls memory_region_iommu_replay() to notify newly registered IOMMU notifiers about existing mappings which is totally desirable for case 1. However for case 2 it is nothing but noop as the window has just been created and has no valid mappings so replaying those does not do anything. It is barely noticeable with usual guests but if the window happens to be really big, such no-op replay might take minutes and trigger RCU stall warnings in the guest. For example, a upcoming GPU RAM memory region mapped at 64TiB (right after SPAPR_PCI_LIMIT) causes a 64bit DMA window to be at least 128TiB which is (128<<40)/0x10000=2.147.483.648 TCEs to replay. This mitigates the problem by adding an "skipping_replay" flag to sPAPRTCETable and defining sPAPR own IOMMU MR replay() hook which does exactly the same thing as the generic one except it returns early if @skipping_replay==true. Another way of fixing this would be delaying replay till the very first H_PUT_TCE but this does not work if in-kernel H_PUT_TCE handler is enabled (a likely case). When "ibm,create-pe-dma-window" is complete, the guest will map only required regions of the huge DMA window. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20190307050518.64968-2-aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a reset handlerCédric Le Goater
Reset all regs but keep the MMIO BAR enabled as it is at realize time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a PSIHB_REG macroCédric Le Goater
This is a simple helper to translate XSCOM addresses to MMIO addresses Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: fix logging primitives using OxCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new pic_print_info() operation to the chip modelCédric Le Goater
The POWER9 and POWER8 processors have different interrupt controllers, and reporting their state requires calling different helper routines. However, the interrupt presenters are still handled in the higher level pic_print_info() routine because they are not related to the chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-9-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: introduce a new dt_populate() operation to the chip modelCédric Le Goater
The POWER9 and POWER8 processors have a different set of devices and a different device tree layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a XIVE interrupt controller model for POWER9Cédric Le Goater
This is a simple model of the POWER9 XIVE interrupt controller for the PowerNV machine which only addresses the needs of the skiboot firmware. The PowerNV model reuses the common XIVE framework developed for sPAPR as the fundamentals aspects are quite the same. The difference are outlined below. The controller initial BAR configuration is performed using the XSCOM bus from there, MMIO are used for further configuration. The MMIO regions exposed are : - Interrupt controller registers - ESB pages for IPIs and ENDs - Presenter MMIO (Not used) - Thread Interrupt Management Area MMIO, direct and indirect The virtualization controller MMIO region containing the IPI ESB pages and END ESB pages is sub-divided into "sets" which map portions of the VC region to the different ESB pages. These are modeled with custom address spaces and the XiveSource and XiveENDSource objects are sized to the maximum allowed by HW. The memory regions are resized at run-time using the configuration of EDT set translation table provided by the firmware. The XIVE virtualization structure tables (EAT, ENDT, NVTT) are now in the machine RAM and not in the hypervisor anymore. The firmware (skiboot) configures these tables using Virtual Structure Descriptor defining the characteristics of each table : SBE, EAS, END and NVT. These are later used to access the virtual interrupt entries. The internal cache of these tables in the interrupt controller is updated and invalidated using a set of registers. Still to address to complete the model but not fully required is the support for block grouping. Escalation support will be necessary for KVM guests. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: change the CPU machine_data presenter type to Object *Cédric Le Goater
The POWER9 PowerNV machine will use a XIVE interrupt presenter type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc: externalize ppc_get_vcpu_by_pir()Cédric Le Goater
We will use it to get the CPU interrupt presenter in XIVE when the TIMA is accessed from the indirect page. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12PPC: E500: Add FSL I2C controller and integrate RTC with itAndrew Randrianasulu
Original commit message: This patch adds an emulation model for i2c controller found on most of the FSL SoCs. It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model. Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com> see http://patchwork.ozlabs.org/patch/431475/ I only fixed it enough for application on top of current qemu master 20b084c4b1401b7f8fbc385649d48c67b6f43d44, and hopefully fixed checkpatch errors Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need network time protocol daemon because it will have working RTC (before all timestamps on files were from 2016) Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com> Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com> Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com> [dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable H_PAGE_INIT in-kernel handlingSuraj Jitindar Singh
The H_CALL H_PAGE_INIT can be used to zero or copy a page of guest memory. Enable the in-kernel H_PAGE_INIT handler. The in-kernel handler takes half the time to complete compared to handling the H_CALL in userspace. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190306060608.19935-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Clear partition table entry when allocating hash tableSuraj Jitindar Singh
If we allocate a hash page table then we know that the guest won't be using process tables, so set the partition table entry maintained for the guest to zero. If this isn't done, then the guest radix bit will remain set in the entry. This means that when the guest calls H_REGISTER_PROCESS_TABLE there will be a mismatch between then flags and the value in spapr->patb_entry, and the call will fail. The guest will then panic: Failed to register process table (rc=-4) kernel BUG at arch/powerpc/platforms/pseries/lpar.c:959 The result being that it isn't possible to boot a hash guest on a P9 system. Also fix a bug in the flags parsing in h_register_process_table() which was introduced by the same patch, and simplify the handling to make it less likely that errors will be introduced in the future. The effect would have been setting the host radix bit LPCR_HR for a hash guest using process tables, which currently isn't supported and so couldn't have been triggered. Fixes: 00fd075e18 "target/ppc/spapr: Set LPCR:HR when using Radix mode" Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190305022102.17610-1-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Enable mitigations by default for pseries-4.0 machine typeSuraj Jitindar Singh
There are currently 3 mitigations the availability of which is controlled by the spapr-caps mechanism, cap-cfpc, cap-sbbc, and cap-ibs. Enable these mitigations by default for the pseries-4.0 machine type. By now machine firmware should have been upgraded to allow these settings. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-3-sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/tcg: make spapr_caps apply cap-[cfpc/sbbc/ibs] non-fatal for tcgSuraj Jitindar Singh
The spapr_caps cap-cfpc, cap-sbbc and cap-ibs are used to control the availability of certain mitigations to the guest. These haven't been implemented under TCG, it is unlikely they ever will be, and it is unclear as to whether they even need to be. As such, make failure to apply these capabilities under TCG non-fatal. Instead we print a warning message to the user but still allow the guest to continue. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301044609.9626-2-sjitindarsingh@gmail.com> [dwg: Small style fix] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc/spapr: Add SPAPR_CAP_CCF_ASSISTSuraj Jitindar Singh
Introduce a new spapr_cap SPAPR_CAP_CCF_ASSIST to be used to indicate the requirement for a hw-assisted version of the count cache flush workaround. The count cache flush workaround is a software workaround which can be used to flush the count cache on context switch. Some revisions of hardware may have a hardware accelerated flush, in which case the software flush can be shortened. This cap is used to set the availability of such hardware acceleration for the count cache flush routine. The availability of such hardware acceleration is indicated by the H_CPU_CHAR_BCCTR_FLUSH_ASSIST flag being set in the characteristics returned from the KVM_PPC_GET_CPU_CHAR ioctl. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Message-Id: <20190301031912.28809-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-30 16:43:25 +0000