aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/ppc.c
AgeCommit message (Collapse)Author
2023-01-04hw/ppc: Use QEMU_IOTHREAD_LOCK_GUARD in ppc_set_irqRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-10-28target/ppc: introduce ppc_maybe_interruptMatheus Ferst
This new method will check if any pending interrupt was unmasked and then call cpu_interrupt/cpu_reset_interrupt accordingly. Code that raises/lowers or masks/unmasks interrupts should call this method to keep CPU_INTERRUPT_HARD coherent with env->pending_interrupts. Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20221021142156.4134411-2-matheus.ferst@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-28target/ppc: define PPC_INTERRUPT_* values directlyMatheus Ferst
This enum defines the bit positions in env->pending_interrupts for each interrupt. However, except for the comparison in kvmppc_set_interrupt, the values are always used as (1 << PPC_INTERRUPT_*). Define them directly like that to save some clutter. No functional change intended. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Message-Id: <20221011204829.1641124-2-matheus.ferst@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-18ppc/e500: Allocate IRQ lines with qdev_init_gpio_in()Cédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220705145814.461723-5-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-18ppc/6xx: Allocate IRQ lines with qdev_init_gpio_in()Cédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220705145814.461723-4-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-18ppc/40x: Allocate IRQ lines with qdev_init_gpio_in()Cédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220705145814.461723-3-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-07-18ppc64: Allocate IRQ lines with qdev_init_gpio_in()Cédric Le Goater
This replaces the IRQ array 'irq_inputs' with GPIO lines, the goal being to remove 'irq_inputs' when all CPUs have been converted. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220705145814.461723-2-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-04hw/ppc: free env->tb_env in spapr_unrealize_vcpu()Daniel Henrique Barboza
The timebase is allocated during spapr_realize_vcpu() and it's not freed. This results in memory leaks when doing vcpu unplugs: ==636935== ==636935== 144 (96 direct, 48 indirect) bytes in 1 blocks are definitely lost in loss record 6 ,461 of 8,135 ==636935== at 0x4897468: calloc (vg_replace_malloc.c:760) ==636935== by 0x5077213: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6400.4) ==636935== by 0x507757F: g_malloc0_n (in /usr/lib64/libglib-2.0.so.0.6400.4) ==636935== by 0x93C3FB: cpu_ppc_tb_init (ppc.c:1066) ==636935== by 0x97BC2B: spapr_realize_vcpu (spapr_cpu_core.c:268) ==636935== by 0x97C01F: spapr_cpu_core_realize (spapr_cpu_core.c:337) ==636935== by 0xD4626F: device_set_realized (qdev.c:531) ==636935== by 0xD55273: property_set_bool (object.c:2273) ==636935== by 0xD523DF: object_property_set (object.c:1408) ==636935== by 0xD588B7: object_property_set_qobject (qom-qobject.c:28) ==636935== by 0xD52897: object_property_set_bool (object.c:1477) ==636935== by 0xD4579B: qdev_realize (qdev.c:333) ==636935== This patch adds a cpu_ppc_tb_free() helper in hw/ppc/ppc.c to allow us to free the timebase. This leak is then solved by calling cpu_ppc_tb_free() in spapr_unrealize_vcpu(). Fixes: 6f4b5c3ec590 ("spapr: CPU hot unplug support") Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20220329124545.529145-2-danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-21Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Patch created mechanically with: $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \ --macro-file scripts/cocci-macro-file.h FILES... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220315144156.1595462-4-armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
2022-02-18ppc: allow the hdecr timer to be created/destroyedNicholas Piggin
Machines which don't emulate the HDEC facility are able to use the timer for something else. Provide functions to start and stop the hdecr timer. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [ clg: checkpatch fixes ] Message-Id: <20220216102545.1808018-4-npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-18spapr: prevent hdec timer being set up under virtual hypervisorNicholas Piggin
The spapr virtual hypervisor does not require the hdecr timer. Remove it. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20220216102545.1808018-3-npiggin@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-02-09target/ppc: Remove PowerPC 601 CPUsCédric Le Goater
The PowerPC 601 processor is the first generation of processors to implement the PowerPC architecture. It was designed as a bridge processor and also could execute most of the instructions of the previous POWER architecture. It was found on the first Macs and IBM RS/6000 workstations. There is not much interest in keeping the CPU model of this POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of the 60x family which implement the complete PowerPC instruction set. Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Message-Id: <20220203142756.1302515-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28Remove unnecessary minimum_version_id_old fieldsPeter Maydell
The migration code will not look at a VMStateDescription's minimum_version_id_old field unless that VMSD has set the load_state_old field to something non-NULL. (The purpose of minimum_version_id_old is to specify what migration version is needed for the code in the function pointed to by load_state_old to be able to handle it on incoming migration.) We have exactly one VMSD which still has a load_state_old, in the PPC CPU; every other VMSD which sets minimum_version_id_old is doing so unnecessarily. Delete all the unnecessary ones. Commit created with: sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old') with the one legitimate use then hand-edited back in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- It missed vmstate_ppc_cpu.
2022-01-04ppc/ppc405: Rework ppc_40x_timers_init() to use a PowerPCCPUCédric Le Goater
This is a small cleanup to ease reading. It includes the removal of a check done on the returned value of g_malloc0(), which can not fail. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211222064025.1541490-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220103063441.3424853-7-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-04ppc/ppc405: Restore TCR and STR write handlersCédric Le Goater
The 405 timers were broken when booke support was added. Assumption was made that the register numbers were the same but it's not : SPR_BOOKE_TSR (0x150) SPR_BOOKE_TCR (0x154) SPR_40x_TSR (0x3D8) SPR_40x_TCR (0x3DA) Cc: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: ddd1055b07fd ("PPC: booke timers") Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211222064025.1541490-5-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220103063441.3424853-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-12-17ppc: Add trace-events for DCR accessesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211206103712.1866296-4-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-10-21hw/ppc: Fix iothread locking in the 405 codeThomas Huth
When using u-boot as firmware with the taihu board, QEMU aborts with this assertion: ERROR:../accel/tcg/tcg-accel-ops.c:79:tcg_handle_interrupt: assertion failed: (qemu_mutex_iothread_locked()) Running QEMU with "-d in_asm" shows that the crash happens when writing to SPR 0x3f2, so we are missing to lock the iothread in the code path here. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211006071140.565952-1-thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-21target/ppc: Fix the test raising the decrementer exceptionCédric Le Goater
Commit 4d9b8ef9b5ab ("target/ppc: Fix 64-bit decrementer") introduced new int64t variables and broke the test triggering the decrementer exception. Revert partially the change to evaluate both clause of the if statement. Reported-by: Coverity CID 1464061 Fixes: 4d9b8ef9b5ab ("target/ppc: Fix 64-bit decrementer") Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211005053324.441132-1-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-30target/ppc: Fix 64-bit decrementerCédric Le Goater
The current way the mask is built can overflow with a 64-bit decrementer. Use sextract64() to extract the signed values and remove the logic to handle negative values which has become useless. Cc: Luis Fernando Fujita Pires <luis.pires@eldorado.org.br> Fixes: a8dafa525181 ("target/ppc: Implement large decrementer support for TCG") Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210920061203.989563-5-clg@kaod.org> Reviewed-by: Luis Pires <luis.pires@eldorado.org.br> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-30target/ppc: Convert debug to trace events (decrementer and IRQ)Cédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210920061203.989563-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-30target/ppc: Replace debug messages by asserts for unknown IRQ pinsCédric Le Goater
If an unknown pin of the IRQ controller is raised, something is very wrong in the QEMU model. It is better to abort. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210920061203.989563-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-14hw/ppc: Do not re-read the clock on pre_save if doing savevmGreg Kurz
A guest with enough RAM, eg. 128G, is likely to detect savevm downtime and to complain about stalled CPUs. This happens because we re-read the timebase just before migrating it and we thus don't account for all the time between VM stop and pre-save. A very similar situation was already addressed for live migration of paused guests (commit d14f33976282). Extend the logic to do the same with savevm. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1893787 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160693010619.1111945.632640981169395440.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-12-14ppc: Add a missing break for PPC6xx_INPUT_TBENChen Qun
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning: hw/ppc/ppc.c: In function ‘ppc6xx_set_irq’: hw/ppc/ppc.c:118:16: warning: this statement may fall through [-Wimplicit-fallthrough=] 118 | if (level) { | ^ hw/ppc/ppc.c:123:9: note: here 123 | case PPC6xx_INPUT_INT: | ^~~~ According to the discussion, a break statement needs to be added here. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20201116024810.2415819-7-kuhn.chenqun@huawei.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOSThomas Huth
It's been deprecated since QEMU v3.1. The 40p machine should be used nowadays instead. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200114114617.28854-1-thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Add SPR TBU40Suraj Jitindar Singh
The spr TBU40 is used to set the upper 40 bits of the timebase register, present on POWER5+ and later processors. This register can only be written by the hypervisor, and cannot be read. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Work [S]PURR implementation and add HV supportSuraj Jitindar Singh
The Processor Utilisation of Resources Register (PURR) and Scaled Processor Utilisation of Resources Register (SPURR) provide an estimate of the resources used by the thread, present on POWER7 and later processors. Currently the [S]PURR registers simply count at the rate of the timebase. Preserve this behaviour but rework the implementation to store an offset like the timebase rather than doing the calculation manually. Also allow hypervisor write access to the register along with the currently available read access. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17target/ppc: Implement the VTB for HV accessSuraj Jitindar Singh
The virtual timebase register (VTB) is a 64-bit register which increments at the same rate as the timebase register, present on POWER8 and later processors. The register is able to be read/written by the hypervisor and read by the supervisor. All other accesses are illegal. Currently the VTB is just an alias for the timebase (TB) register. Implement the VTB so that is can be read/written independent of the TB. Make use of the existing method for accessing timebase facilities where by the compensation is stored and used to compute the value on reads/is updated on writes. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> [ clg: rebased on current ppc tree ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191128134700.16091-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Don't use CPUPPCState::irq_input_state with modern Book3s CPU modelsGreg Kurz
The power7_set_irq() and power9_set_irq() functions set this but it is never used actually. Modern Book3s compatible CPUs are only supported by the pnv and spapr machines. They have an interrupt controller, XICS for POWER7/8 and XIVE for POWER9, whose models don't require to track IRQ input states at the CPU level. Drop these lines to avoid confusion. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548862861.3650476.16622818876928044450.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Deassert the external interrupt pin in KVM on resetGreg Kurz
When a CPU is reset, QEMU makes sure no interrupt is pending by clearing CPUPPCstate::pending_interrupts in ppc_cpu_reset(). In the case of a complete machine emulation, eg. a sPAPR machine, an external interrupt request could still be pending in KVM though, eg. an IPI. It will be eventually presented to the guest, which is supposed to acknowledge it at the interrupt controller. If the interrupt controller is emulated in QEMU, either XICS or XIVE, ppc_set_irq() won't deassert the external interrupt pin in KVM since it isn't pending anymore for QEMU. When the vCPU re-enters the guest, the interrupt request is still pending and the vCPU will try again to acknowledge it. This causes an infinite loop and eventually hangs the guest. The code has been broken since the beginning. The issue wasn't hit before because accel=kvm,kernel-irqchip=off is an awkward setup that never got used until recently with the LC92x IBM systems (aka, Boston). Add a ppc_irq_reset() function to do the necessary cleanup, ie. deassert the IRQ pins of the CPU in QEMU and most importantly the external interrupt pin for this vCPU in KVM. Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157548861740.3650476.16879693165328764758.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc: Introduce a ppc_cpu_pir() helperCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191125065820.927-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21migration: Do not re-read the clock on pre_save in case of paused guestMaxiwell S. Garcia
Re-read the timebase before migrate was ported from x86 commit: 6053a86fe7bd: kvmclock: reduce kvmclock difference on migration The clock move makes the guest knows about the paused time between the stop and migrate commands. This is an issue in an already-paused VM because some side effects, like process stalls, could happen after migration. So, this patch checks the runstate of guest in the pre_save handler and do not re-reads the timebase in case of paused state (cold migration). Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com> Message-Id: <20190711194702.26598-1-maxiwell@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-07-02ppc: Introduce kvmppc_set_reg_tb_offset() helperGreg Kurz
Introduce a KVM helper and its stub instead of guarding the code with CONFIG_KVM. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156051055736.224162.11641594431517798715.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02hw/ppc: Drop useless CONFIG_KVM ifdeferyGreg Kurz
kvmppc_set_interrupt() has a stub that does nothing when CONFIG_KVM is not defined. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <156051055182.224162.15842560287892241124.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/ppc: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace ppc_env_get_cpu with env_archcpu. The combination CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-29target/ppc: Consolidate 64-bit server processor detection in a helperGreg Kurz
We use PPC_SEGMENT_64B in various places to guard code that is specific to 64-bit server processors compliant with arch 2.x. Consolidate the logic in a helper macro with an explicit name. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155327783157.1283071.3747129891004927299.stgit@bahia.lan> Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc: externalize ppc_get_vcpu_by_pir()Cédric Le Goater
We will use it to get the CPU interrupt presenter in XIVE when the TIMA is accessed from the indirect page. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12target/ppc: Implement large decrementer support for TCGSuraj Jitindar Singh
Prior to POWER9 the decrementer was a 32-bit register which decremented with each tick of the timebase. From POWER9 onwards the decrementer can be set to operate in a mode called large decrementer where it acts as a n-bit decrementing register which is visible as a 64-bit register, that is the value of the decrementer is sign extended to 64 bits (where n is implementation dependant). The mode in which the decrementer operates is controlled by the LPCR_LD bit in the logical paritition control register (LPCR). >From POWER9 onwards the HDEC (hypervisor decrementer) was enlarged to h-bits, also sign extended to 64 bits (where h is implementation dependant). Note this isn't configurable and is always enabled. On POWER9 the large decrementer and hdec are both 56 bits, as represented by the lrg_decr_bits cpu class property. Since they are the same size we only add one property for now, which could be extended in the case they ever differ in the future. We also add the lrg_decr_bits property for POWER5+/7/8 since it is used to determine the size of the hdec, which is only generated on the POWER5+ processor and later. On these processors it is 32 bits. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190301024317.22137-2-sjitindarsingh@gmail.com> [dwg: Small style fixes] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Add POWER9 external interrupt modelBenjamin Herrenschmidt
Adds support for the Hypervisor directed interrupts in addition to the OS ones. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - modified the icp_realize() and xive_tctx_realize() to take into account explicitely the POWER9 interrupt model - introduced a specific power9_set_irq for POWER9 ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190215161648.9600-10-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26target/ppc: Rename "in_pm_state" to "resume_as_sreset"Benjamin Herrenschmidt
To better reflect what this does, as it's specific to some of the P7/P8/P9 PM states, not generic. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190215161648.9600-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04hw/ppc: Don't include m48t59.h if it is not necessaryThomas Huth
These files don't use anything from m48t59.h, so no need to include this header here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-04hw/ppc: Move ppc40x_*reset() functions from ppc405_uc.c to ppc.cThomas Huth
Currently, it is not possible to build a QEMU binary without the ppc405_uc.c file, even if you do not want to have the embedded machines in the binary. This is bad since it's quite a bit of code and this code pulls in some more dependencies (e.g. via the usage of serial_mm_init()) which would not be needed otherwise - especially with the upcoming Kconfig-style configuration system for QEMU. The only functions from this file which are really always required for linking are the ppc40x_*reset() functions, so move these functions to ppc.c, close to the ppc40x_set_irq() function that calls them. Now we can flag ppc405_uc.c and ppc4xx_devs.c with the CONFIG_PPC4XX config switch, too. And while we're at it, replace the printf()s in these ppc40x_*reset() functions with proper calls to qemu_log_mask(). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-25 17:57:37 +0000