aboutsummaryrefslogtreecommitdiff
path: root/hw/pl011.c
AgeCommit message (Collapse)Author
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-20hw/pl011: Use LOG_UNIMP and LOG_GUEST_ERRORPeter Maydell
Use the new LOG_UNIMP and LOG_GUEST_ERROR logging types rather than hw_error(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-20hw/pl011.c: Avoid crash on read when no chr backend presentPeter Maydell
Add a missing guard that meant we would segfault if the guest read UARTDR on a PL011 serial device which had no chr backend connected. (This didn't happen for Linux guests because Linux reads the flags register and doesn't try to read the UART if it's empty.) Reported-by: Christian Müller <christian.mueller@heig-vd.ch> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: nuke qdev_init_chardev()Anthony Liguori
I'm sure the intentions were good here, but there's no reason this should be in qdev. Move it to qemu-char where it belongs. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-24pl011: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23Correct spelling of licensedMatthew Fernandez
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-22vmstate: port pl011Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14PL011 qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-02Save/restore for stellaris boards.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4824 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-08Implement break for the pl011, based on a patch from Jason Wessel.aurel32
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4182 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-25Add input buffer to mux chr (patch by Tristan Gingold).balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3735 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-11ARMv7 support.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3572 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-10Fix 64-bit host printf format mismatches.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3564 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-07-11Spelling fixes, by Stefan Weil.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3066 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-03Fix off-by-one memory region sizes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2931 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-07Unify IRQ handling.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2635 c046a42c-6fe2-441c-8c8c-71466251a162
2007-01-27Rearrange char event handlers to fix CHR_EVENT_RESET.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2361 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-09ARM Versatile Platform Baseboard emulation.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1804 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 11:41:07 +0000