aboutsummaryrefslogtreecommitdiff
path: root/hw/pcnet.c
AgeCommit message (Collapse)Author
2011-11-01pcnet: Add link state supportJan Kiszka
Update lnkst on link state changes so that guests can obtain this information via reading back the LED output pin. Works for Linux but not for guests that depend on the missing PHY. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01pcnet: Move BCR defines to headerJan Kiszka
This moves BCR defines to the common header and immediately makes use of them to add BCR_APROMWE, replacing the open-coded write check in pcnet_aprom_writeb. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-01pcnet: Fix sign extension: make ipxe work with >2G RAMMichael Brown
The problem is with definitions in hw/pcnet.c such as: #define CSR_CRDA(S) ((S)->csr[28] | ((S)->csr[29] << 16)) "(S)->csr[29]" is a uint16_t, but "(S)->csr[29] << 16" gets promoted to int, so the overall CSR_CRDA(s) is a (signed) int rather than a uint32_t. This then gets assigned to a uint64_t using target_phys_addr_t crda = CSR_CRDA(s); so when (S)->csr[29] has the high bit set, we end up with crda=0xffffffffxxxxxxxx. From: Michael Brown <mcb30@ipxe.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-13moving eeprom initializationWilliam Dauchy
The initialization should not be only on reset but also when initializing the device. It resolves a bug when hot plugging a pci network device: the mac address was always null. Signed-off-by: William Dauchy <wdauchy@gmail.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-05hw/pcnet.c: Fix EPROM contents to suit AMD netware driversGerhard Wiesinger
bugfix under DOS for AMD netware driver: AMD PCNTNW Ethernet MLID v3.10 (960115), network card not found bugfix works well under DOS with: 1.) AMD NDIS driver v2.0.1 2.) AMD PCNTNW Ethernet MLID v3.10 (960115) 3.) Knoppix 6.2 Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-27Split out common pcnet codePaul Brook
The core pcnet emulation code is used by both the PCI "pcnet" device and the SPARC "lance" device. Split the common code frm the PCI code so that that can be configures independantly. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-21pcnet: Do not receive external frames in loopback modeJan Kiszka
While not explicitly stated in the spec, it was observed on real systems that enabling loopback testing on the pcnet controller disables reception of external frames. And some legacy software relies on it, so provide this behavior. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-11pcnet: address TODOsMichael S. Tsirkin
pcnet enables memory/io on init, which does not make sense as BAR values are wrong. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-15pcnet: make subsystem vendor id match hardwareMichael S. Tsirkin
Real pcnet device (AT2450) apparently has subsystem device and vendor id set to 0, this is out of spec (which requires that vendor id is obtained from PCI SIG) but windows xp driver seems to need this in order to associate. qemu sets pci subsystem id to qumranet/qemu since d350d97d196a632b6c7493acf07a061017fc6f7d, debian does not yet have this patch. https://bugzilla.redhat.com/show_bug.cgi?id=521247 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com>
2010-03-08pcnet APROMWE bit location (retry)Chris Kilgour
According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2. Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13pcnet: remove dead nested assignment, spotted by clangBlue Swirl
Although the value stored to 'addr' is used in the enclosing expression, the value is never actually read from 'addr'. Probably a typo. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23pcnet: switch to symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert pcnet to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce FMT_PCIBUS for printf format for pcibus_t.Isaku Yamahata
This patch is preliminary for 64bit BAR. Later pcibus_t will be changed from uint32_t to uint64_t. Introduce FMT_PCIBUS for printf format for pcibus_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07sparc32 (mostly): remove unneeded calls to device resetBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-27pcnet: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27pcnet: split away lance.c (sparc32 code).Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27pcnet: use qdev properties for configuration.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15pcnet: Extend hardware resetJan Kiszka
Update the IRQ state and stop the poll timer on reset. Moreover, register the reset function with qemu. Patchworks-ID: 35462 Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08pcnet: Restart poll timer on pcnet_startJan Kiszka
Just like we call into pcnet_poll_timer on stop, we need to call it on start to trigger the setup of the poll timer. Patchworks-ID: 35313 Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-08pcnet: Drop unused recv_pos fieldJan Kiszka
This state field was never used, simply remained 0. Drop it from the PCNetState and update the save/restore code accordingly, keeping backward compatibility. Patchworks-ID: 35314 Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: move unregister from PCIDevice to PCIDeviceInfoGerd Hoffmann
One more cleanup while being at it ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: Add pci_pcnet_{save/load} functions, then remove PCNetState pci_dev fieldJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: remove useless casts This are casts to the very type of the functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27pcnet: Change casts to DO_UPCAST() for PCIPCNetStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-10qdev/prop: convert pcnet.c to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-16qdev: rework device properties.Gerd Hoffmann
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09qdev: update pci device registration.Gerd Hoffmann
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch of parameters. Also adds config_read and config_write callbacks to PCIDeviceInfo, so drivers needing these can be converted to the qdev device API too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-26Remove qdev irq sink handlingPaul Brook
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Fix lance segfaultsPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PCI network qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-03use PCI_HEADER_TYPE.Isaku Yamahata
use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-01Pci nic: pci_register_device can failChris Wright
The pci_register_device() call in PCI nic initialization routines can fail. Handle this failure and propagate a meaningful error message to the user instead of generating a SEGV. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 05:08:58 +0000