aboutsummaryrefslogtreecommitdiff
path: root/hw/pci
AgeCommit message (Collapse)Author
2020-08-21meson: convert hw/pciMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27hw/pci-host: save/restore pci host config registerHogan Wang
The pci host config register is used to save PCI address for read/write config data. If guest writes a value to config register, and then QEMU pauses the vcpu to migrate, after the migration, the guest will continue to write pci config data, and the write data will be ignored because of new qemu process losing the config register state. To trigger the bug: 1. guest is booting in seabios. 2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then expects to disable the SMRAM by pci_config_writeb. 3. after guest writes the pci host config register, QEMU pauses vcpu to finish migration. 4. guest write of config data(0x0A) fails to disable the SMRAM because the config register state is lost. 5. guest continues to boot and crashes in ipxe option ROM due to SMRAM in enabled state. Example Reproducer: step 1. Make modifications to seabios and qemu for increase reproduction efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after 0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch 0x402 port wrote 0xf0. seabios:/src/hw/pci.c @@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val) writeb(mmconfig_addr(bdf, addr), val); } else { outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); + if (bdf == 0 && addr == 0x72 && val == 0xa) { + dprintf(1, "stop vcpu\n"); + outb(0xf0, 0x402); // notify qemu to stop vcpu + dprintf(1, "resume vcpu\n"); + } outb(val, PORT_PCI_DATA + (addr & 3)); } } qemu:hw/char/debugcon.c @@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val); #endif + if (ch == 0xf0) { + vm_stop(RUN_STATE_PAUSED); + } /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); step 2. start vm1 by the following command line, and then vm stopped. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio step 3. start vm2 to accept vm1 state. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio \ -incoming tcp:127.0.0.1:8000 step 4. execute the following qmp command in vm1 to migrate. (qemu) migrate tcp:127.0.0.1:8000 step 5. execute the following qmp command in vm2 to resume vcpu. (qemu) cont Before this patch, we get KVM "emulation failure" error on vm2. This patch fixes it. Cc: qemu-stable@nongnu.org Signed-off-by: Hogan Wang <hogan.wang@huawei.com> Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-02qdev: Drop qbus_set_hotplug_handler() parameter @errpMarkus Armbruster
qbus_set_hotplug_handler() is a simple wrapper around object_property_set_link(). object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing &error_abort to qbus_set_hotplug_handler() is appropriate. Most of its callers do. Exceptions: * pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL, i.e. they ignore errors. * spapr_machine_init() passes &error_fatal. * s390_pcihost_realize(), virtio_serial_device_realize(), s390_pcihost_plug() pass the error to their callers. The latter two keep going after the error, which looks wrong. Drop the @errp parameter, and instead pass &error_abort to object_property_set_link(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
2020-07-02pci: Delete useless error_propagate()Markus Armbruster
Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200630090351.1247703-3-armbru@redhat.com>
2020-06-15pci: pci_create(), pci_create_multifunction() are now unused, dropMarkus Armbruster
Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-18-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15pci: New pci_new(), pci_realize_and_unref() etc.Markus Armbruster
I'm converting from qdev_create()/qdev_init_nofail() to qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. PCI devices use qdev_create() through pci_create() and pci_create_multifunction(). Provide pci_new(), pci_new_multifunction(), and pci_realize_and_unref() for converting PCI devices. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-14-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert to qdev_unrealize() with CoccinelleMarkus Armbruster
For readability, and consistency with qbus_realize(). Coccinelle script: @ depends on !(file in "hw/core/qdev.c")@ typedef DeviceState; DeviceState *dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(dev); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(DEVICE(dev)); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-8-armbru@redhat.com>
2020-06-15qdev: Convert to qbus_realize(), qbus_unrealize()Markus Armbruster
I'm going to convert device realization to qdev_realize() with the help of Coccinelle. Convert bus realization to qbus_realize() first, to get it out of Coccinelle's way. Readability improves. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-7-armbru@redhat.com>
2020-06-12Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Miscellaneous fixes and feature enablement (many) * SEV refactoring (David) * Hyper-V initial support (Jon) * i386 TCG fixes (x87 and SSE, Joseph) * vmport cleanup and improvements (Philippe, Liran) * Use-after-free with vCPU hot-unplug (Nengyuan) * run-coverity-scan improvements (myself) * Record/replay fixes (Pavel) * -machine kernel_irqchip=split improvements for INTx (Peter) * Code cleanups (Philippe) * Crash and security fixes (PJP) * HVF cleanups (Roman) # gpg: Signature made Fri 12 Jun 2020 16:57:04 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (116 commits) target/i386: Remove obsolete TODO file stubs: move Xen stubs to accel/ replay: fix replay shutdown for console mode exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h' hw/usb: Move device-specific declarations to new 'hcd-musb.h' header exec/memory: Remove unused MemoryRegionMmio type checkpatch: reversed logic with acpi test checks target/i386: sev: Unify SEVState and SevGuestState target/i386: sev: Remove redundant handle field target/i386: sev: Remove redundant policy field target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields target/i386: sev: Partial cleanup to sev_state global target/i386: sev: Embed SEVState in SevGuestState target/i386: sev: Rename QSevGuestInfo target/i386: sev: Move local structure definitions into .c file target/i386: sev: Remove unused QSevGuestInfoClass xen: fix build without pci passthrough i386: hvf: Drop HVFX86EmulatorState i386: hvf: Move mmio_buf into CPUX86State i386: hvf: Move lazy_flags into CPUX86State ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/i386/acpi-build.c
2020-06-12pci: Display PCI IRQ pin in "info pci"Peter Xu
Sometimes it would be good to be able to read the pin number along with the IRQ number allocated. Since we'll dump the IRQ number, no reason to not dump the pin information. For example, the vfio-pci device will overwrite the pin with the hardware pin number. It would be nice to know the pin number of one assigned device from QMP/HMP. CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> CC: Julia Suvorova <jusual@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20200317195908.283800-1-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2020-06-12hw/pci: Fix crash when running QEMU with "-nic model=rocker"Thomas Huth
QEMU currently aborts when being started with "-nic model=rocker" or with "-net nic,model=rocker". This happens because the "rocker" device is not a normal NIC but a switch, which has different properties. Thus we should only consider real NIC devices for "-nic" and "-net". These devices can be identified by the "netdev" property, so check for this property before adding the device to the list. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Fixes: 52310c3fa7dc854d ("net: allow using any PCI NICs in -net or -nic") Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200527153152.9211-1-thuth@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-10accel: Move Xen accelerator code under accel/xen/Philippe Mathieu-Daudé
This code is not related to hardware emulation. Move it under accel/ with the other hypervisors. Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200508100222.7112-1-philmd@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-09hw/pci/pci_bridge: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
IEC binary prefixes ease code review: the unit is explicit. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-5-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09hw/pci/pci_bridge: Correct pci_bridge_io memory region sizePhilippe Mathieu-Daudé
memory_region_set_size() handle the 16 Exabytes limit by special-casing the UINT64_MAX value. This is not a problem for the 32-bit maximum, 4 GiB. By using the UINT32_MAX value, the pci_bridge_io MemoryRegion ends up missing 1 byte: (qemu) info mtree memory-region: pci_bridge_io 0000000000000000-00000000fffffffe (prio 0, i/o): pci_bridge_io 0000000000000060-0000000000000060 (prio 0, i/o): i8042-data 0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd 00000000000001ce-00000000000001d1 (prio 0, i/o): vbe 0000000000000378-000000000000037f (prio 0, i/o): parallel 00000000000003b4-00000000000003b5 (prio 0, i/o): vga ... Fix by using the correct value. We now have: memory-region: pci_bridge_io 0000000000000000-00000000ffffffff (prio 0, i/o): pci_bridge_io 0000000000000060-0000000000000060 (prio 0, i/o): i8042-data 0000000000000064-0000000000000064 (prio 0, i/o): i8042-cmd ... Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200601142930.29408-4-f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-09pci: assert configuration access is within boundsPrasad J Pandit
While accessing PCI configuration bytes, assert that 'address + len' is within PCI configuration space. Generally it is within bounds. This is more of a defensive assert, in case a buggy device was to send 'address' which may go out of bounds. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20200604113525.58898-1-ppandit@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09hw/pci/pcie: Move hot plug capability check to pre_plug callbackJulia Suvorova
Check for hot plug capability earlier to avoid removing devices attached during the initialization process. Run qemu with an unattached drive: -drive file=$FILE,if=none,id=drive0 \ -device pcie-root-port,id=rp0,slot=3,bus=pcie.0,hotplug=off Hotplug a block device: device_add virtio-blk-pci,id=blk0,drive=drive0,bus=rp0 If hotplug fails on plug_cb, drive0 will be deleted. Fixes: 0501e1aa1d32a6 ("hw/pci/pcie: Forbid hot-plug if it's disabled on the slot") Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200604125947.881210-1-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-09msix: allow qword MSI-X table accessesMichael S. Tsirkin
PCI spec says: For all accesses to MSI-X Table and MSI-X PBA fields, software must use aligned full DWORD or aligned full QWORD transactions; otherwise, the result is undefined. However, since MSI-X was converted to use memory API, QEMU started blocking qword transactions, only allowing DWORD ones. Guests do not seem to use QWORD accesses, but let's be spec compliant. Fixes: 95524ae8dc8f ("msix: convert to memory API") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-04hw/pci/pcie: Replace PCI_DEVICE() casts with existing variableJulia Suvorova
A little cleanup is possible because of hotplug_pdev introduction. Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200427182440.92433-3-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2020-05-04hw/pci/pcie: Forbid hot-plug if it's disabled on the slotJulia Suvorova
Raise an error when trying to hot-plug/unplug a device through QMP to a device with disabled hot-plug capability. This makes the device behaviour more consistent and provides an explanation of the failure in the case of asynchronous unplug. Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200427182440.92433-2-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2020-03-16pci: Honour wmask when resetting PCI_INTERRUPT_LINEBALATON Zoltan
The pci_do_device_reset() function (called from pci_device_reset) clears the PCI_INTERRUPT_LINE config reg of devices on the bus but did this without taking wmask into account. We'll have a device model now that needs to set a constant value for this reg and this patch allows to do that without additional workaround in device emulation to reverse the effect of this PCI bus reset function. Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 20200313082444.2439-4-mark.cave-ayland@ilande.co.uk Signed-off-by: John Snow <jsnow@redhat.com>
2020-03-08pcie_root_port: Add hotplug disabling optionJulia Suvorova
Make hot-plug/hot-unplug on PCIe Root Ports optional to allow libvirt manage it and restrict unplug for the whole machine. This is going to prevent user-initiated unplug in guests (Windows mostly). Hotplug is enabled by default. Usage: -device pcie-root-port,hotplug=off,... If you want to disable hot-unplug on some downstream ports of one switch, disable hot-unplug on PCIe Root Port connected to the upstream port as well as on the selected downstream ports. Discussion related: https://lists.gnu.org/archive/html/qemu-devel/2020-02/msg00530.html Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200226174607.205941-1-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-20migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-05hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argumentPhilippe Mathieu-Daudé
Both functions are called by MemoryRegionOps.[read/write] handlers with unsigned 'size' argument. Both functions call pci_host_config_[read/write]_common() which expect a uint32_t 'len' parameter (also unsigned). Since it is pointless (and confuse) to use a signed value, use a unsigned type. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-3-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05hw/pci/pci_host: Remove redundant PCI_DPRINTF()Philippe Mathieu-Daudé
In commit 3bf4dfdd111 we introduced the pci_cfg_[read/write] trace events in pci_host_config_[read/write]_common(). We have the following call trace: pci_host_data_[read/write]() - PCI_DPRINTF() - pci_data_[read/write]() - PCI_DPRINTF() - pci_host_config_[read/write]_common() trace_pci_cfg_[read/write]() Since the PCI_DPRINTF() calls are redundant with the trace events, remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191216002134.18279-2-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-18hw/pci: Remove the "command_serr_enable" propertyThomas Huth
Now that the old pc-0.x machine types have been removed, this config knob is not required anymore. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191209125248.5849-4-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17pci-stub: add more MSI functionsPaolo Bonzini
On x86, KVM needs some function from the PCI subsystem in order to set up interrupt routes. Provide some stubs to support x86 machines that lack PCI. Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-05pci: Use PCI aliases when determining device IOMMU address spaceAlex Williamson
PCIe requester IDs are used by modern IOMMUs to differentiate devices in order to provide a unique IOVA address space per device. These requester IDs are composed of the bus/device/function (BDF) of the requesting device. Conventional PCI pre-dates this concept and is simply a shared parallel bus where transactions are claimed by decoding target ranges rather than the packetized, point-to-point mechanisms of PCI-express. In order to interface conventional PCI to PCIe, the PCIe-to-PCI bridge creates and accepts packetized transactions on behalf of all downstream devices, using one of two potential forms of a requester ID relating to the bridge itself or its subordinate bus. All downstream devices are therefore aliased by the bridge's requester ID and it's not possible for the IOMMU to create unique IOVA spaces for devices downstream of such buses. At least that's how it works on bare metal. Until now point we've ignored this nuance of vIOMMU support in QEMU, creating a unique AddressSpace per device regardless of the virtual bus topology. Aside from simply being true to bare metal behavior, there are aspects of a shared address space that we can use to our advantage when designing a VM. For instance, a PCI device assignment scenario where we have the following IOMMU group on the host system: $ ls /sys/kernel/iommu_groups/1/devices/ 0000:00:01.0 0000:01:00.0 0000:01:00.1 An IOMMU group is considered the smallest set of devices which are fully DMA isolated from other devices by the IOMMU. In this case the root port at 00:01.0 does not guarantee that it prevents peer to peer traffic between the endpoints on bus 01: and the devices are therefore grouped together. VFIO considers an IOMMU group to be the smallest unit of device ownership and allows only a single shared IOVA space per group due to the limitations of the isolation. Therefore, if we attempt to create the following VM, we get an error: qemu-system-x86_64 -machine q35... \ -device intel-iommu,intremap=on \ -device pcie-root-port,addr=1e.0,id=pcie.1 \ -device vfio-pci,host=1:00.0,bus=pcie.1,addr=0.0,multifunction=on \ -device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1 qemu-system-x86_64: -device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1: vfio \ 0000:01:00.1: group 1 used in multiple address spaces VFIO only allows a single IOVA space (AddressSpace) for both devices, but we've placed them into a topology where the vIOMMU expects a separate AddressSpace for each device. On bare metal we know that a conventional PCI bus would provide the sort of aliasing we need here, forcing the IOMMU to consider these devices to be part of a single shared IOVA space. The support provided here does the same for QEMU, such that we can create a conventional PCI topology to expose equivalent AddressSpace sharing requirements to the VM: qemu-system-x86_64 -machine q35... \ -device intel-iommu,intremap=on \ -device pcie-pci-bridge,addr=1e.0,id=pci.1 \ -device vfio-pci,host=1:00.0,bus=pci.1,addr=1.0,multifunction=on \ -device vfio-pci,host=1:00.1,bus=pci.1,addr=1.1 There are pros and cons to this configuration; it's not necessarily recommended, it's simply a tool we can use to create configurations which may provide additional functionality in spite of host hardware limitations or as a benefit to the guest configuration or resource usage. An incomplete list of pros and cons: Cons: a) Extended PCI configuration space is unavailable to devices downstream of a conventional PCI bus. The degree to which this is a drawback depends on the device and guest drivers. b) Applying this topology to devices which are already isolated by the host IOMMU (singleton IOMMU groups) will result in devices which appear to be non-isolated to the VM (non-singleton groups). This can limit configurations within the guest, such as userspace drivers or nested device assignment. Pros: a) QEMU better emulates bare metal. b) Configurations as above are now possible. c) Host IOMMU resources and VM locked memory requirements are reduced in vIOMMU configurations due to shared IOMMU domains on the host and avoidance of duplicate locked memory accounting. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <157187083548.5439.14747141504058604843.stgit@gimli.home> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29migration: allow unplug during migration for failover devicesJens Freimann
In "b06424de62 migration: Disable hotplug/unplug during migration" we added a check to disable unplug for all devices until we have figured out what works. For failover primary devices qdev_unplug() is called from the migration handler, i.e. during migration. This patch adds a flag to DeviceState which is set to false for all devices and makes an exception for PCI devices that are also primary devices in a failover pair. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-8-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29pci: mark device having guest unplug request pendingJens Freimann
Set pending_deleted_event in DeviceState for failover primary devices that were successfully unplugged by the Guest OS. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-5-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29pci: mark devices partially unpluggedJens Freimann
Only the guest unplug request was triggered. This is needed for the failover feature. In case of a failed migration we need to plug the device back to the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-4-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29pci: add option for net failoverJens Freimann
This patch adds a failover_pair_id property to PCIDev which is used to link the primary device in a failover pair (the PCI dev) to a standby (a virtio-net-pci) device. It only supports ethernet devices. Also currently it only supports PCIe devices. The requirement for PCIe is because it doesn't support other hotplug controllers at the moment. The failover functionality can be added to other hotplug controllers like ACPI, SHCP,... later on. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-3-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-24pci_bridge: fix a typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190909031446.1331810-1-maozhongyi@cmss.chinamobile.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-16Include sysemu/sysemu.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16numa: Move remaining NUMA declarations from sysemu.h to numa.hMarkus Armbruster
Commit e35704ba9c "numa: Move NUMA declarations from sysemu.h to numa.h" left a few NUMA-related macros behind. Move them now. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-26-armbru@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include migration/qemu-file-types.h a lot lessMarkus Armbruster
In my "build everything" tree, changing migration/qemu-file-types.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The culprit is again hw/hw.h, which supposedly includes it for convenience. Include migration/qemu-file-types.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-01pcie: minor cleanups for slot control/statusMichael S. Tsirkin
Rename function arguments to make intent clearer. Better documentation for slot control logic. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01pcie: work around for racy guest initMichael S. Tsirkin
During boot, linux guests tend to clear all bits in pcie slot status register which is used for hotplug. If they clear bits that weren't set this is racy and will lose events: not a big problem for manual hotplug on bare-metal, but a problem for us. For example, the following is broken ATM: /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \ -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -device virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 \ -monitor stdio disk.qcow2 (qemu)device_del balloon (qemu)cont Balloon isn't deleted as it should. As a work-around, detect this attempt to clear slot status and revert status to what it was before the write. Note: in theory this can be detected as a duplicate button press which cancels the previous press. Does not seem to happen in practice as guests seem to only have this bug during init. Note2: the right thing to do is probably to fix Linux to read status before clearing it, and act on the bits that are set. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01pcie: check that slt ctrl changed before deletingMichael S. Tsirkin
During boot, linux would sometimes overwrites control of a powered off slot before powering it on. Unfortunately QEMU interprets that as a power off request and ejects the device. For example: /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \ -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -monitor stdio disk.qcow2 (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 (qemu)cont Balloon is deleted during guest boot. To fix, save control beforehand and check that power or led state actually change before ejecting. Note: this is more a hack than a solution, ideally we'd find a better way to detect ejects, or move away from ejects completely and instead monitor whether it's safe to delete device due to e.g. its power state. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-07-01pcie: don't skip multi-mask eventsMichael S. Tsirkin
If we are trying to set multiple bits at once, testing that just one of them is already set gives a false positive. As a result we won't interrupt guest if e.g. presence detection change and attention button press are both set. This happens with multi-function device removal. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-06Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Trivial fixes 06/06/2019 # gpg: Signature made Thu 06 Jun 2019 12:05:50 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/watchdog/wdt_i6300esb: Use DEVICE() macro to access DeviceState.qdev hw/scsi: Use the QOM BUS() macro to access BusState.qbus hw/sd: Use the QOM BUS() macro to access BusState.qbus hw/audio/ac97: Use the QOM DEVICE() macro to access DeviceState.qdev hw/vfio/pci: Use the QOM DEVICE() macro to access DeviceState.qdev hw/usb-storage: Use the QOM DEVICE() macro to access DeviceState.qdev hw/isa: Use the QOM DEVICE() macro to access DeviceState.qdev hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbus hw/pci-bridge: Use the QOM BUS() macro to access BusState.qbus hw/scsi/vmw_pvscsi: Use qbus_reset_all() directly docs/devel/build-system: Update an example test: Fix make target check-report.tap util: Adjust qemu_guest_getrandom_nofail for Coverity vhost: fix incorrect print type migration: fix a typo hw/rdma: Delete unused headers inclusion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 14:16:44 +0000