aboutsummaryrefslogtreecommitdiff
path: root/hw/pci
AgeCommit message (Collapse)Author
2014-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi,pc,pci fixes and enhancements Most changes here are hotplug related: This merges hotplug infrastructure changes by Igor, some acpi related fixes, and PC fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: ACPI: Remove commented-out code from HPET._CRS hw/pci: switch to a generic hotplug handling for PCIDevice pci/pcie: convert PCIE hotplug to use hotplug-handler API pci/shpc: convert SHPC hotplug to use hotplug-handler API acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API qdev:pci: refactor PCIDevice to use generic "hotpluggable" property hw/acpi: move typeinfo to the file end qdev: add "hotpluggable" property to Device qdev: add to BusState "hotplug-handler" link define hotplug interface loader: document that errno is set pc.c: better error message on initrd sizing failure pc_piix: enable legacy hotplug for Xen qtest: don't report signals if qtest driver enabled hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug pcihp: remove unused AcpiPciHpPciStatus.device_present field pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR pcihp: replace enable|disable_device() with oneliners pcihp: reduce number of device check events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-11exec: Make stl_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-10hw/pci: switch to a generic hotplug handling for PCIDeviceIgor Mammedov
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/pcie: convert PCIE hotplug to use hotplug-handler APIIgor Mammedov
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/shpc: convert SHPC hotplug to use hotplug-handler APIIgor Mammedov
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26hw/pci: fix error flow in pci multifunction initMarcel Apfelbaum
Scenario: - There is a non multifunction pci device A on 00:0X.0. - Hot-plug another multifunction pci device B at 00:0X.1. - The operation will fail of course. - Try to hot-plug the B device 2-3 more times, qemu will crash. Reason: The error flow leaves the B's address space into global address spaces list, but the device object is freed. Fixed that. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pci: add pci_for_each_bus_depth_firstMichael S. Tsirkin
Useful for ACPI hotplug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-10Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
acpi,pci,pc,fedora,virtio fixes and enhancements This includes some Preparatory patches for cpu hotplug for q25 and memory hotplug by Igor, tests and memory mapping change by Laszlo and pci reset cleanup by Paolo. There are also some fixes for fedora and virtio: included here since they are test blockers for me. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: target-arm: fix build with gcc 4.8.2 virtio: add back call to virtio_bus_device_unplugged piix: fix 32bit pci hole qdev: switch reset to post-order qdev: allow both pre- and post-order vists in qdev walking functions pci: clean up resetting of IRQs pci: do not export pci_bus_reset ACPI/DSDT-CPU: cleanup bogus comment ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler acpi: ich9: allow guest to clear SCI rised by GPE acpi: factor out common pm_update_sci() into acpi core acpi: piix4: remove not needed GPE0 mask i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash i440fx-test: generate temporary firmware blob i440fx-test: give each GTest case its own qtest i440fx-test: qtest_start() should be paired with qtest_end() hw/i386/pc_sysfw: support two flash drives pc_piix: document gigabyte_align piix: gigabyte alignment for ram Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-24qdev: Drop misleading qbus_free() functionStefan Hajnoczi
Same reasoning as commit 02a5c4c97422b40034f31265e0f139f7846172a8 ("qdev: Drop misleading qdev_free() function"). The qbus_free() function removes the child from the namespace and decrements the reference count. It does not, however, guarantee to free the child since the refcount may still be held. Just call object_unparent() directly. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23qdev: switch reset to post-orderPaolo Bonzini
Post-order is the only sensible direction for the reset signals. For example, suppose pre-order is used and the parent has some data structures that cache children state (for example a list of active requests). When the reset method is invoked on the parent, these caches could be in any state. If post-order is used, on the other hand, these will be in a known state when the reset method is invoked on the parent. This change means that it is no longer possible to block the visit of the devices, so the callback is changed to return void. This is not a problem, because PCI was returning 1 exactly in order to achieve the same ordering that this patch implements. PCI can then rely on the qdev core having sent a "reset signal" (whatever that means) to the device, and only do the PCI-specific initialization with pci_do_device_reset. MST: fixed up virtio-ccw Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23pci: clean up resetting of IRQsPaolo Bonzini
pci_device_reset will deassert the INTX pins, and this will make the irq_count array all-zeroes. Check that this is the case, and remove the existing loop which might even unsync irq_count and irq_state. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23pci: do not export pci_bus_resetPaolo Bonzini
qbus_reset_all can be used instead. There is no semantic change because pcibus_reset returns 1 and takes care of the device tree traversal. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11pci: fix pci bridge fw pathGerd Hoffmann
qemu uses "pci" as name for pci bridges in the firmware device path. seabios expects "pci-bridge". Result is that bootorder is broken for devices behind pci bridges. Some googling suggests that "pci-bridge" is the correct one. At least PPC-based Apple machines are using this. See question "How do I boot from a device attached to a PCI card" here: http://www.netbsd.org/ports/macppc/faq.html So lets change qemu to use "pci-bridge" too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10pci: fix address space size for bridgeMichael S. Tsirkin
Address space size for bridge should be full 64 bit, so we should use UINT64_MAX not INT64_MAX as it's size. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-21pci: unregister vmstate_pcibus on unplugBandan Das
PCIBus registers a vmstate during init. Unregister it upon removal/unplug. Signed-off-by: Bandan Das <bsd@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-10Revert "hw/pci: partially handle pci master abort"Marcel Apfelbaum
This reverts commit a53ae8e934cd54686875b5bcfc2f434244ee55d6. The patch being reverted introduced a low-priority memory region covering all 64 bit pci address space. This exposed the following bugs elsewhere in the code: 1. Some memory regions have INT64_MAX size, where the intent was all 64 bit address space. This results in a sub-page region, should be UINT64_MAX. 2. page table rendering in exec.c ignores physical address bits above TARGET_PHYS_ADDR_SPACE_BITS. Access outside this range (e.g. from device DMA, or gdb stub) ends up with a wrong region. Registering a region outside this range leads to page table corruption. 3. Some regions overlap PCI hole and have same priority. This only works as long as no device uses the overlapping address. It doesn't look like we can resolve all issues in time for 1.7. Let's fix the bugs first and apply afterwards for 1.8. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-05bswap.h: Remove cpu_to_be32wu()Peter Maydell
Replace the legacy cpu_to_be32wu() with stl_be_p(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1383669517-25598-8-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-05qdev: Drop misleading qdev_free() functionStefan Hajnoczi
The qdev_free() function name is misleading since all the function does is unlink the device from its parent. The device is not necessarily freed. The device will be freed when its QObject refcount reaches zero. It is usual for the parent (bus) to hold the final reference but there are cases where something else holds a reference so "free" is a misleading name. Call object_unparent(obj) directly instead of having a qdev wrapper function. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-31Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci, pc, acpi fixes, enhancements This includes some pretty big changes: - pci master abort support by Marcel - pci IRQ API rework by Marcel - acpi generation support by myself Everything has gone through several revisions, latest versions have been on list for a while without any more comments, tested by several people. Please pull for 1.7. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: (39 commits) ssdt-proc: update generated file ssdt: fix PBLK length i386: ACPI table generation code from seabios pc: use new api to add builtin tables acpi: add interface to access user-installed tables hpet: add API to find it pvpanic: add API to access io port ich9: APIs for pc guest info piix: APIs for pc guest info acpi/piix: add macros for acpi property names i386: define pc guest info loader: allow adding ROMs in done callbacks i386: add bios linker/loader loader: use file path size from fw_cfg.h acpi: ssdt pcihp: updat generated file acpi: pre-compiled ASL files acpi: add rules to compile ASL source i386: add ACPI table files from seabios q35: expose mmcfg size as a property q35: use macro for MCFG property name ... Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-16Makefile.target: CONFIG_NO_* variables removedÁkos Kovács
CONFIG_NO_* variables replaced with the lnot logical function Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> [PMM: fixed a few CONFIG_NO_* uses that were missed] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-10-14pcie_host: expose address formatMichael S. Tsirkin
Callers pass in the address so it's helpful for them to be able to decode it. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pcie_host: expose UNMAPPED macroMichael S. Tsirkin
Make it possible to test unmapped status through QMP. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14pci: fix up w64 size calculation helperMichael S. Tsirkin
BAR base was calculated incorrectly. Use existing pci_bar_address to get it right. Tested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: removed irq field from PCIDeviceMarcel Apfelbaum
Instead of exposing the the irq field, pci wrappers to qemu_set_irq or qemu_irq_* can be used. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pcie: AER and hot-plug events must use device's interruptMarcel Apfelbaum
The fields hpev_intx and aer_intx were removed because both AER and hot-plug events must use device's interrupt. Assert/deassert interrupts using pci irq wrappers instead. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: add pci wrappers for allocating and asserting irqsMarcel Apfelbaum
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN register during device initialization. Devices should not call directly qemu_set_irq and specify the INTx pin on each call. Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise, qemu_irq_lower and qemu_irq_pulse, setting the irq based on PCI_INTERRUPT_PIN. Added pci_allocate_irq wrapper to be used by devices that still need PCIDevice infrastructure to assert irqs. Renamed a static method which was named already pci_set_irq. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw/pci: partially handle pci master abortMarcel Apfelbaum
A MemoryRegion with negative priority was created and it spans over all the pci address space. It "intercepts" the accesses to unassigned pci address space and will follow the pci spec: 1. returns -1 on read 2. does nothing on write Note: setting the RECEIVED MASTER ABORT bit in the STATUS register of the device that initiated the transaction will be implemented in another series Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15pci: remove explicit check to 64K ioport sizeHervé Poussineau
This check is useless, as bigger addresses will be ignored when added to 'io' MemoryRegion, which has a size of 64K. However, some architectures don't use the 'io' MemoryRegion, like the alpha and versatile platforms. They create a PCI I/O region bigger than 64K, so let them handle PCI I/O BARs in the higher range. MST: reinstated work-around for BAR sizing. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15pci: add helper to retrieve the 64-bit rangeMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-09Add c++ keywords to QAPI helper scriptTomoki Sekiyama
Add c++ keywords to avoid errors in compiling with c++ compiler. This also renames class member of PciDeviceInfo to q_class. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-03Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc,pci,virtio fixes and cleanups This includes pc and pci cleanups and enhancements, and a virtio bugfix for level interrupts. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (3) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: virtio_pci: fix level interrupts with irqfd pc: reduce duplication, fix PIIX descriptions hw: Clean up bogus default boot order pci: add config space access traces pc: fix regression for 64 bit PCI memory pci: Introduce helper to retrieve a PCI device's DMA address space Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-30qdev: Pass size to qbus_create_inplace()Andreas Färber
To be passed to object_initialize(). Since commit 39355c3826f5d9a2eb1ce3dc9b4cdd68893769d6 the argument is void*, so drop some superfluous (BusState *) casts or direct parent field usages. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30pci: Pass size to pci_bus_new_inplace()Andreas Färber
To be passed to qbus_create_inplace(). Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-28pci: add config space access tracesAlexey Kardashevskiy
This adds pci_cfg_read and pci_cfg_write traces for config spaces accesses. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-27pci: Introduce helper to retrieve a PCI device's DMA address spaceAlexey Kardashevskiy
A PCI device's DMA address space (possibly an IOMMU) is returned by a method on the PCIBus. At the moment that only has one caller, so the method is simply open coded. We'll need another caller for VFIO, so this patch introduces a helper/wrapper function. If IOMMU is not set, the pci_device_iommu_address_space() function returns the parent's IOMMU skipping the "bus master" address space as otherwise proper emulation would require more effort for no benefit. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [aik: added inheritance from parent if iommu is not set for the current bus] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29pcie_port: Turn PCIEPort and PCIESlot into abstract QOM typesAndreas Färber
Move PCIEPort's "port" property to the new type, same for "aer_log_max". Move PCIESlot's "chassis" and "slot" properties to the new type. Reviewed-by: Don Koch <dkoch@verizon.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29pci-bridge: Turn PCIBridge into abstract QOM typeAndreas Färber
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts. Reviewed-by: Don Koch <dkoch@verizon.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> [AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()Andreas Färber
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline() return an Error**. Prepare qdev initfns for QOM realize error model. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-18Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,net,pc enhancements This includes some fixes and enhancements that accumulated in my tree: pci fixes by dkoch, virtio-net enhancements by akong and mst, and a fix for xen pc by mst. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Don Koch (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pc: don't access fw cfg if NULL virtio-net: add feature bit for any header s/g net: add support of mac-programming over macvtap in QEMU side pci: fix BRDIGE typo pci-bridge: update mappings for migration/restore Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-10pci-bridge: update mappings for migration/restoreDon Koch
Fix for LP#1187529: Devices on PCI bridge stop working when live-migrated. Update bridge mappings for all PCI bridge devices in get_pci_config_device(). Signed-off-by: Don Koch <dkoch@verizon.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-08Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,misc enhancements This includes some pci enhancements: Better support for systems with multiple PCI root buses FW cfg interface for more robust pci programming in BIOS Minor fixes/cleanups for fw cfg and cross-version migration - because of dependencies with other patches Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By David Gibson (10) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: Fold host_buses list into PCIHostState functionality pci: Remove domain from PCIHostBus pci: Simpler implementation of primary PCI bus pci: Add root bus parameter to pci_nic_init() pci: Add root bus argument to pci_get_bus_devfn() pci: Replace pci_find_domain() with more general pci_root_bus_path() pci: Use helper to find device's root bus in pci_find_domain() pci: Abolish pci_find_root_bus() pci: Move pci_read_devaddr to pci-hotplug-old.c pci: Cleanup configuration for pci-hotplug.c pvpanic: fix fwcfg for big endian hosts pvpanic: initialization cleanup MAINTAINERS: s/Marcelo/Paolo/ e1000: cleanup process_tx_desc pc_piix: cleanup init compat handling pc: pass PCI hole ranges to Guests pci: store PCI hole ranges in guestinfo structure range: add Range structure Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-07pci: Fold host_buses list into PCIHostState functionalityDavid Gibson
The host_buses list is an odd structure - a list of pointers to PCI root buses existing in parallel to the normal qdev tree structure. This patch removes it, instead putting the link pointers into the PCIHostState structure, which have a 1:1 relationship to PCIHostBus structures anyway. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Remove domain from PCIHostBusDavid Gibson
There are now no users of the domain field of PCIHostBus, so remove it from the structure, and as a parameter from the pci_host_bus_register() function which sets it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Simpler implementation of primary PCI busDavid Gibson
Currently pci_find_primary_bus() searches the list of root buses for one with domain 0. But since host buses are always registered with domain 0, this just amounts to finding the only PCI host bus. The only remaining users of pci_find_primary_bus() are in pci-hotplug-old.c, which implements the old style pci_add/pci_del commands. Therefore, this patch redefines pci_find_primary_bus() to find the only PCI root bus, returning an error if there are multiple roots. The callers in pci-hotplug-old.c are updated correspondingly, to produce sensible error messages. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Add root bus parameter to pci_nic_init()David Gibson
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will only create a NIC under the primary PCI root. As we add support for multiple PCI roots, that may no longer be the case. This patch adds a root bus parameter to pci_nic_init() (and updates callers accordingly) to allow the machine init code using it to specify the right PCI root for NICs created by old-style -net nic parameters. NICs created new-style, with -device can of course be put anywhere. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Add root bus argument to pci_get_bus_devfn()David Gibson
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus * and device/function number within that bus. Currently it assumes it is working on an address under the primary PCI root bus. This patch extends it to allow the caller to specify a root bus. This might seem a little odd since the supplied address can (theoretically) include a PCI domain number. However, attempting to use a non-zero domain number there is currently an error, so that shouldn't really cause problems. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Replace pci_find_domain() with more general pci_root_bus_path()David Gibson
pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-07pci: Use helper to find device's root bus in pci_find_domain()David Gibson
Currently pci_find_domain() performs two functions - it locates the PCI root bus above the given bus, then looks up that root bus's domain number. This patch adds a helper function to perform the first task, finding the root bus for a given PCI device. This is then used in pci_find_domain(). This changes pci_find_domain()'s signature slightly, taking a PCIDevice instead of a PCIBus - since all callers passed something of the form dev->bus, this simplifies things slightly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 08:43:39 +0000