aboutsummaryrefslogtreecommitdiff
path: root/hw/pci/pci_bridge.c
AgeCommit message (Collapse)Author
2018-12-19hw/pci-bridge: Fix invalid free()Matthias Weckbecker
When loadvm'ing a *running* snapshot qemu crashes due to an invalid free. It's fortunately caught early by glibc heap memory corruption protection and qemu gets killed with SIGABRT. Steps to reproduce: 1) Create VM (e.g w/ virsh define) 2) Start the VM and take a snapshot while it's running and having a PCI bridge attached 3) Destroy the VM and revert the running snapshot. This commit fixes the issue. Signed-off-by: Matthias Weckbecker <matthias@weckbecker.name> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05pci_bridge: fix typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-15pci: allow 32-bit PCI IO accesses to pass through the PCI bridgeMark Cave-Ayland
Whilst the underlying PCI bridge implementation supports 32-bit PCI IO accesses, unfortunately they are truncated at the legacy 64K limit. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce bridge-only vendor-specific capability to provide some ↵Aleksandr Bezzubikov
hints to firmware On PCI init PCI bridges may need some extra info about bus number, IO, memory and prefetchable memory to reserve. QEMU can provide this with a special vendor-specific PCI capability. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Convert to realizeMao Zhongyi
Convert i82801b11, io3130_upstream, io3130_downstream and pcie_root_port devices to realize. Cc: mst@redhat.com Cc: marcel@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Make errp the last parameter of pci_add_capability()Mao Zhongyi
Add Error argument for pci_add_capability() to leverage the errp to pass info on errors. This way is helpful for its callers to make a better error handling when moving to 'realize'. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-02-16change type of pci_bridge_initfn() to voidCao jin
Since it can`t fail. Also modify the callers. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-01-29pci: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
2014-08-25pci_bridge: manually destroy memory regions within PCIBridgeWindowsPaolo Bonzini
The regions are destroyed and recreated on configuration space accesses. We need to destroy them before the containing PCIBridgeWindows object is freed. Reported-by: Gonglei <arei.gonglei@huawei.com> Reported-by: Knut Omang <knut.omang@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-10Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
acpi,pci,pc,fedora,virtio fixes and enhancements This includes some Preparatory patches for cpu hotplug for q25 and memory hotplug by Igor, tests and memory mapping change by Laszlo and pci reset cleanup by Paolo. There are also some fixes for fedora and virtio: included here since they are test blockers for me. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: target-arm: fix build with gcc 4.8.2 virtio: add back call to virtio_bus_device_unplugged piix: fix 32bit pci hole qdev: switch reset to post-order qdev: allow both pre- and post-order vists in qdev walking functions pci: clean up resetting of IRQs pci: do not export pci_bus_reset ACPI/DSDT-CPU: cleanup bogus comment ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler acpi: ich9: allow guest to clear SCI rised by GPE acpi: factor out common pm_update_sci() into acpi core acpi: piix4: remove not needed GPE0 mask i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash i440fx-test: generate temporary firmware blob i440fx-test: give each GTest case its own qtest i440fx-test: qtest_start() should be paired with qtest_end() hw/i386/pc_sysfw: support two flash drives pc_piix: document gigabyte_align piix: gigabyte alignment for ram Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-12-24qdev: Drop misleading qbus_free() functionStefan Hajnoczi
Same reasoning as commit 02a5c4c97422b40034f31265e0f139f7846172a8 ("qdev: Drop misleading qdev_free() function"). The qbus_free() function removes the child from the namespace and decrements the reference count. It does not, however, guarantee to free the child since the refcount may still be held. Just call object_unparent() directly. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23pci: do not export pci_bus_resetPaolo Bonzini
qbus_reset_all can be used instead. There is no semantic change because pcibus_reset returns 1 and takes care of the device tree traversal. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10pci: fix address space size for bridgeMichael S. Tsirkin
Address space size for bridge should be full 64 bit, so we should use UINT64_MAX not INT64_MAX as it's size. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-05qdev: Drop misleading qdev_free() functionStefan Hajnoczi
The qdev_free() function name is misleading since all the function does is unlink the device from its parent. The device is not necessarily freed. The device will be freed when its QObject refcount reaches zero. It is usual for the parent (bus) to hold the final reference but there are cases where something else holds a reference so "free" is a misleading name. Call object_unparent(obj) directly instead of having a qdev wrapper function. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30qdev: Pass size to qbus_create_inplace()Andreas Färber
To be passed to object_initialize(). Since commit 39355c3826f5d9a2eb1ce3dc9b4cdd68893769d6 the argument is void*, so drop some superfluous (BusState *) casts or direct parent field usages. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29pci-bridge: Turn PCIBridge into abstract QOM typeAndreas Färber
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts. Reviewed-by: Don Koch <dkoch@verizon.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> [AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-18Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,net,pc enhancements This includes some fixes and enhancements that accumulated in my tree: pci fixes by dkoch, virtio-net enhancements by akong and mst, and a fix for xen pc by mst. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Don Koch (2) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pc: don't access fw cfg if NULL virtio-net: add feature bit for any header s/g net: add support of mac-programming over macvtap in QEMU side pci: fix BRDIGE typo pci-bridge: update mappings for migration/restore Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-10pci-bridge: update mappings for migration/restoreDon Koch
Fix for LP#1187529: Devices on PCI bridge stop working when live-migrated. Update bridge mappings for all PCI bridge devices in get_pci_config_device(). Signed-off-by: Don Koch <dkoch@verizon.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04hw/p*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-26pci: Allow PCI bus creation interfaces to specify the type of busAlex Williamson
No change to any types. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-26pci_bridge: Use a default map_irq functionAlex Williamson
The PCI bridge spec defines a default swizzle for translating INTx IRQs from secondary bus to primary. Use this by default for any bridge that doesn't set a function. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-03-26pci: Teach PCI Bridges about VGA routingAlex Williamson
Each PCI Bridge has a set of implied VGA regions that are enabled when the VGA bit is set in the bridge control register. This allows VGA devices behind bridges. Unfortunately with VGA Enable, which we formerly allowed but didn't back, comes along some required VGA baggage. VGA Palette Snooping is required, along with VGA 16-bit decoding. We don't yet have support for palette snooping. We also don't have support for 10-bit VGA aliases, the default mode, but we enable the register, even on root ports, to avoid confusing guests. Fortunately there's likely nothing from this century that requires these features, so the missing bits are noted with TODOs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: rename pci_internals.h pci_bus.hMichael S. Tsirkin
There are lots of external users of pci_internals.h, apparently making it an internal interface only didn't work out. Let's stop pretending it's an internal header. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: fix path for local includesMichael S. Tsirkin
Include dependencies from pci core using the correct path. This is required now that it's in the separate directory. Need to check whether they can be minimized, for now, keep the code as is. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17pci: move pci core code to hw/pciMichael S. Tsirkin
Move files and modify makefiles to pick them at the new location. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-15 09:24:22 +0000