aboutsummaryrefslogtreecommitdiff
path: root/hw/pci.h
AgeCommit message (Collapse)Author
2010-09-18Introduce range.hBlue Swirl
Extract range functions from pci.h. These will be used by later patches by non-PCI devices. Adjust current users. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci_bridge: make pci bridge aware of pci multi function bit.Isaku Yamahata
make pci bridge aware of pci multi function property and let pci generic code to set the bit. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: introduce multifunction property.Isaku Yamahata
introduce multifunction property. Also introduce new convenient device creation function which will be used later. For bisectability this patch doesn't do anything, but sets the property resulting in no functional changes. Actual changes will be introduced by later patch. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: remove PCIDeviceInfo::header_typeIsaku Yamahata
replace PCIDeviceInfo::header_type with is_bridge as suggested by Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: insert assert that auto-assigned-address function is single function ↵Isaku Yamahata
device. Auto-assigned-address pci function (passing devfn = -1) is always single function. This patch adds assert() to guarantee that auto-assigned-address function is always single function device at function = 0. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-31pci-hotplug: make them aware of pci domain.Isaku Yamahata
add helper function which converts root bus to pci domain. make them aware of pci domain. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci.h: remove unused constants.Isaku Yamahata
So remove unused constants, PCI_STATUS_RESERVED_MASK_LO, PCI_STATUS_RESERVED_MASK_HI, PCI_COMMAND_RESERVED, PCI_COMMAND_RESERVED_MASK_HI. They were used once, but they aren't used anymore. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-31pci: add const to pci_is_express(), pci_config_size().Isaku Yamahata
add const to pci_is_express(), pci_config_size(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-05-15pci hotplug: add argument to pci hot plug callback.Isaku Yamahata
Add argument, DeviceState*, to pci hot plug callback. The argument will be used later to remove global variable. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-11pci: add API to add capability at a known offsetMichael S. Tsirkin
Unlike virtio, device emulations need to add pci capabilities at known offsets to match real hardware. Make this possible by adding an appropriate API. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-03-08adding helper pci functionsIzik Eidus
Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-14pci: move pcibus_t to qemu-commonMichael S. Tsirkin
move pcibus_t to qemu-common.h to simplify header dependencies. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-01-26PCI: Convert pci_info() to QObjectLuiz Capitulino
The returned QObject is a QList of all buses. Each bus is represented by a QDict, which has a key with a QList of all PCI devices attached to it. Each device is represented by a QDict. As has happended to other complex conversions, it's hard to split this commit as part of it are new functions which are called by each other. IMPORTANT: support for printing PCI bridge attached devices is NOT part of this commit, it's going to be added by the next commit, as it's untested. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-13pci: Add missing 'const' in argument to pci_get_xxxStefan Weil
pci_get_byte, pci_get_word, pci_get_long and pci_get_quad all take a const uint8_t pointer, because they only read the configuration data. Their prototypes should reflect this fact. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-01-11pci: allow loading roms via fw_cfg.Gerd Hoffmann
This patch adds a pci bus property 'rombar' which specifies whenever the pci rom should be loaded via pci rom bar (default) or via fw_cfg. The later can be used for compatibility with older qemu versions where no pci rom bar is present. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-06Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2009-12-25PCI: make pci_mem_base privateBlue Swirl
Make pci_mem_base private to PCIBus. Add a function to set it. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23pci: use pci_regs.hIsaku Yamahata
include pci_regs.h and remove duplicated defines. And remove unused PCI_REVISION and PCI_SUBDEVICE_ID. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-23pci: s/PCI_SUBVENDOR_ID/PCI_SUBSYSTEM_VENDOR_ID/gIsaku Yamahata
To match Linux PCI register definition, rename PCI_SUBVENDOR_ID to PCI_SUBSYSTEM_VENDOR_ID. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-23pci: remove unused macroMichael S. Tsirkin
PCI_STATUS_DEVSEL is unused, and it also has a different name in pci_regs.h Remove. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-23pci: add another devsel macroMichael S. Tsirkin
will be used by ensoniq emulation Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-23pci: add more status bitsMichael S. Tsirkin
will be used by eepro100. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-23pcnet: switch to symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-23Revert "Revert "pci: interrupt disable bit support""Michael S. Tsirkin
This reverts commit d587e0787153f0224a6140c5015609963ceaabfb.
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "pci: interrupt disable bit support"Anthony Liguori
This reverts commit 0ea5709a32085f7d14901a09d12bd35f9b267607. Per discussion with Michael Tsirkin, this is too risky for 0.12 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-07pci: interrupt disable bit supportMichael S. Tsirkin
Interrupt disable bit is mandatory in PCI spec. Implement it to make devices spec compliant. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-07pci: interrupt status bit implementationMichael S. Tsirkin
interrupt status is a mandatory feature in PCI spec, so devices must implement it to be spec compliant. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-07pci: prepare irq code for interrupt stateMichael S. Tsirkin
This rearranges code in preparation for interrupt state implementation. Changes: - split up bus walk away from interrupt handling into a subroutine - change irq_state from an array to bitmask - verify that irq_state values are 0 or 1 on load There are no functional changes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-02pci: move apb specific stuff to apb_pci.cMichael S. Tsirkin
pci code had a TODO to move apb specific pci bridge initialization to apb_pci. Implement this and remove the TODO. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01pci: pci bridge related clean up.Isaku Yamahata
- fix bridge prefetchable memory accesser to check 64bit or not. - use pcibus_t consistently instead mixing pcibus_t and uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: remove unused constantsIsaku Yamahata
This patch removes unused constants committed by fb23162885f7fd8cf7334bed22c25ac32c7d8b9d. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: remove some unnecessary comment in pci.hIsaku Yamahata
This patch removes some comment which should go into commit log in pci.h. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: s/pci_find_host_bus/pci_find_root_bus/gIsaku Yamahata
This patch renames pci_find_host_bus() to pci_find_root_bus() as suggested by "Michael S. Tsirkin" <mst@redhat.com>. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: move pci_data_{read, write}() declaration from pci.h to pci_host.hIsaku Yamahata
Now pci host stuff has been moved from pci.[hc] to pci_host.[hc] so the declaration of pci_data_{read, write}() should be in pci_host.h This patch moves them from pci.h to pci_host.h for consistency. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-09pci: implement pci bridge filtering.Isaku Yamahata
This patch implements pci bridge filtering. TODO: currently almost all the map funcions assumes filtered_size == size and addr & ~(size - 1) == addr. However with bridge filtering, they aren't always true. Teach them such cases, such that filtered_size < size and addr & (size - 1) != 0. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: initialize pci config headers depending it pci header type.Isaku Yamahata
- Only sets default subsystem id for header type 00.(normal header type) because header type 01 doesn't have subsystem id, and uses the register for other purpose. So setting default subsystem id doesn't make sense. - initialize wmask more for header type 01.(bridge header type) Without those wmasks, linux was confused not boot, and lspci was confused not to print out expected IO/memory range. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: add helper functions to check ranges overlap.Isaku Yamahata
add helper function to check ranges overlap suggested by Michael S. Tsirkin <mst@redhat.com>. His original suggestion was to use [first, last], however I chosen to use offset, length pair, i.e. [offset, offset + length) because pci configuration space related functions all uses offset and length pair, so it helps to avoid to type constant twice. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: pcie host and mmcfg support.Isaku Yamahata
This patch adds common routines for pcie host bridge and pcie mmcfg. This will be used by q35 based chipset emulation. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci_host: change the signature of pci_data_{read, write}.Isaku Yamahata
change the first argument, void *opaque to PCIBus *s of the pci_data_{read, write}. They aren't used as direct callback so the argument type don't have to be void*. So change it to the right type. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: make pci configuration transaction more accurate.Isaku Yamahata
This patch sorts out/enhances pci code to track pci bus topology more accurately. - Track host bus bridge with pci domain number. Although the current qemu implementation supports only pci domian 0 yet. - Track pci bridge parent-child relationship. When looking down from pci host bus for pci sub bus, be aware of secondary bus/subordinate bus. Thus pci configuration transaction is more accurately emulated. This patch adds new member to PCIBus to track pci bus topology. Since qdev already tracks down bus relationship, those new member wouldn't be necessary. However it would be addressed later because not all the pci device isn't converted to qdev yet. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: 64bit bar support.Isaku Yamahata
implemented pci 64bit bar support. The tricky bit is pci_update_mapping(). An OS is allowed to set the BAR such that OS can't address the area pointed by BAR. It doesn't make sense, though. In that case, don't map the BAR. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: typedef pcibus_t as uint64_t instead of uint32_t.Isaku Yamahata
This patch is preliminary for 64bit bar. For 64bit bar support, change pcibus_t which represents pci bus addr/size from uint32_t to uint64_t. And also change FMT_pcibus for printf. In pci_update_mapping() checks 32bit overflow. So the check must be updated too. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce FMT_PCIBUS for printf format for pcibus_t.Isaku Yamahata
This patch is preliminary for 64bit BAR. Later pcibus_t will be changed from uint32_t to uint64_t. Introduce FMT_PCIBUS for printf format for pcibus_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: make pci_bar() aware of header type 1.Isaku Yamahata
make pci_bar() aware of header type 1. When PCI_ROM_SLOT it should return PCI_ROM_ADDRESS1 (!= PCI_ROM_ADDRESS) Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: helper functions to access PCIDevice::configIsaku Yamahata
add helper functions to get/set PCIDevice::config Those will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 19:41:28 +0000