aboutsummaryrefslogtreecommitdiff
path: root/hw/pci.c
AgeCommit message (Collapse)Author
2010-02-13pci: fix info pci with host bridge.Isaku Yamahata
This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5. pci host bridge doesn't have header type of bridge. The check should be by header type, instead of pci class device. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-08pci: fix pci_find_bus()Isaku Yamahata
typo in c021f8e65f5009a5ab5711d9d5326fcab553ef1c. comparison fix. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-06PCI: show also host bridge data in "info pci" outputBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-06PCI: fix multiple bridge problemsBlue Swirl
When several PCI bridges were in use, monitor command "info pci" would enter into infinite loop. Buses behind the bridge were not discoverable because secondary and subordinate bus numbers were not used properly. Other buses were not found because bus search terminated on first miss. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-26PCI: fix bridge configurationBlue Swirl
PCI bridges' qdev info structures must indicate bridge header type, otherwise critical bridge registers (esp. PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-26PCI: do_pci_info(): PCI bridge devices supportLuiz Capitulino
This commit completes the do_pci_info() conversion to QObject by adding support to PCI bridge devices. This is done by recursively adding devices in the "pci_bridge" key. IMPORTANT: This code is being added separately because I could NOT test it properly. According to Michael Tsirkin, it depends on ultrasparc and it would take time to do the proper setup. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26PCI: Convert pci_info() to QObjectLuiz Capitulino
The returned QObject is a QList of all buses. Each bus is represented by a QDict, which has a key with a QList of all PCI devices attached to it. Each device is represented by a QDict. As has happended to other complex conversions, it's hard to split this commit as part of it are new functions which are called by each other. IMPORTANT: support for printing PCI bridge attached devices is NOT part of this commit, it's going to be added by the next commit, as it's untested. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11pci: allow loading roms via fw_cfg.Gerd Hoffmann
This patch adds a pci bus property 'rombar' which specifies whenever the pci rom should be loaded via pci rom bar (default) or via fw_cfg. The later can be used for compatibility with older qemu versions where no pci rom bar is present. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-06Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2009-12-27PCI: Fix bus address conversionBlue Swirl
Pass physical addresses to map functions instead of PCI bus addresses. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-25PCI: partially revert 2e01c8cf4b076b05013c87723e3fc710b50a0a7aBlue Swirl
Bus address conversion was not correct. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-25PCI: make pci_mem_base privateBlue Swirl
Make pci_mem_base private to PCIBus. Add a function to set it. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23pci: s/PCI_SUBVENDOR_ID/PCI_SUBSYSTEM_VENDOR_ID/gIsaku Yamahata
To match Linux PCI register definition, rename PCI_SUBVENDOR_ID to PCI_SUBSYSTEM_VENDOR_ID. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-23pci: remove PCIBus::config_reg.Isaku Yamahata
PCIBus::config_reg isn't used anymore, so remove it. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-23Revert "Revert "pci: interrupt disable bit support""Michael S. Tsirkin
This reverts commit d587e0787153f0224a6140c5015609963ceaabfb.
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "pci: interrupt disable bit support"Anthony Liguori
This reverts commit 0ea5709a32085f7d14901a09d12bd35f9b267607. Per discussion with Michael Tsirkin, this is too risky for 0.12 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12pci: don't hw_error() when no slot is available.Gerd Hoffmann
Current PCI code will simply hw_error() and thus abort in case no free PCI slot is available or the requested PCI slot is already in use by another device. For the hotplug case this behavior is not acceptable. This patch makes qemu pass up the error properly, so the calling code can decide whenever it wants to exit with an error (on startup) or whenever it wants to continue (hotplug). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-07pci: interrupt disable bit supportMichael S. Tsirkin
Interrupt disable bit is mandatory in PCI spec. Implement it to make devices spec compliant. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-07pci: interrupt status bit implementationMichael S. Tsirkin
interrupt status is a mandatory feature in PCI spec, so devices must implement it to be spec compliant. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-07pci: prepare irq code for interrupt stateMichael S. Tsirkin
This rearranges code in preparation for interrupt state implementation. Changes: - split up bus walk away from interrupt handling into a subroutine - change irq_state from an array to bitmask - verify that irq_state values are 0 or 1 on load There are no functional changes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-03pci: vmstate_register() already assign consecutive numbers starting at 0Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-02pci: move apb specific stuff to apb_pci.cMichael S. Tsirkin
pci code had a TODO to move apb specific pci bridge initialization to apb_pci. Implement this and remove the TODO. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01pci: convert goto into scope in bridge_filterMichael S. Tsirkin
goto into scope is evil. rearrange pci_bridge_filter so that we always go to end of function on error. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-01pci: pci bridge related clean up.Isaku Yamahata
- fix bridge prefetchable memory accesser to check 64bit or not. - use pcibus_t consistently instead mixing pcibus_t and uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: fix pci_config_get_io_base().Isaku Yamahata
fix typo in pci_config_get_io_base(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: remove magic number, 256 in pci.cIsaku Yamahata
This patch replaces magic number, 256, with ARRAY_SIZE(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: split up up pci_update mappingsMichael S. Tsirkin
Split bar address math into a separate function. In particular, this gets rid of an ugly forward goto into scope that we have there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-12-01pci: clean up of pci_update_mappings()Isaku Yamahata
This patch converts r->size == 0 to !r_size. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: clean up of pci_init_wmask().Isaku Yamahata
This patch replaces for loop by memset in pci_init_wmask(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: kill unnecessary included in pci.cIsaku Yamahata
including pci_host.h isn't needed by pci.c. This patch kills it. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: s/pci_find_host_bus/pci_find_root_bus/gIsaku Yamahata
This patch renames pci_find_host_bus() to pci_find_root_bus() as suggested by "Michael S. Tsirkin" <mst@redhat.com>. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: remove pci_sub_bus() by open coding.Isaku Yamahata
Because pci_sub_bus() is used only once so eliminate it by open coding as suggested by "Michael S. Tsirkin" <mst@redhat.com>. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01pci: fix pci_info_device().Isaku Yamahata
It printed wrong limit value of bridge. This patch fixes it. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-15PCI: make duplicate devfn allocation fatalBlue Swirl
Only two callers of pci_create_simple/pci_register_device bothered to check the return value. Other cases were prone to crashing with spurious NULL pointer dereferences. Make QEMU exit with an error message when devfn is attempted to be duplicated, also applies to case when the bus is full. Remove checks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-14pci: Fix function pci_default_write_configStefan Weil
Change 260c0cd3d985e51b15870ff47e17b7b930efbda1 (pci: use range helper functions) introduced a bug which made pci cirrus vga on mips malta (and maybe other pci devices) fail. Don't change addr - its original value is needed by ranges_overlap() and range_covers(). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Ryan Harper <ryanh@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-12pci: fix the conversion of config field from array to pointerJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci/monitor: print out bridge's filtering values and so on.Isaku Yamahata
make pci_info_device() print out bridge's filtering value like io base/limit, subbus and subordinate bus. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: implement pci bridge filtering.Isaku Yamahata
This patch implements pci bridge filtering. TODO: currently almost all the map funcions assumes filtered_size == size and addr & ~(size - 1) == addr. However with bridge filtering, they aren't always true. Teach them such cases, such that filtered_size < size and addr & (size - 1) != 0. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: factor out pci_for_each_device().Isaku Yamahata
split out device iteration logic from pci_for_each_device(). factored out function, pci_for_each_device_under_bus() will be used later. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: cosmetic on pci_upadte_mappings()Isaku Yamahata
Remove one indentation of pci_update_mappings. Just for cosmetics, no logic change. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: initialize pci config headers depending it pci header type.Isaku Yamahata
- Only sets default subsystem id for header type 00.(normal header type) because header type 01 doesn't have subsystem id, and uses the register for other purpose. So setting default subsystem id doesn't make sense. - initialize wmask more for header type 01.(bridge header type) Without those wmasks, linux was confused not boot, and lspci was confused not to print out expected IO/memory range. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: teach pci_default_config_write() ROM bar for normal/bridge device .Isaku Yamahata
When updated ROM expantion address of header type 0, it missed to update mappings. Add PCI_ROM_ADDRESS check whether to call pci_update_mappings() Also update pci mapping when PCI_ROM_ADDRESS1 is written for header type 1. pci_update_mapping() path isn't performance critical, so call it even independent of header type. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: use range helper functions.Isaku Yamahata
clean up pci_default_write_config() by the range helper functions. Suggested by Michael S. Tsirkin <mst@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: pcie host and mmcfg support.Isaku Yamahata
This patch adds common routines for pcie host bridge and pcie mmcfg. This will be used by q35 based chipset emulation. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: move pci host stuff from pci.c to pci_host.cIsaku Yamahata
Move pci host stuff from pci.c to pci_host.c. And add some comments. Later pcie host bridge functions will be defined in pcie_host.c not to bloat pci.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: factor out the conversion logic from io port address into pci device.Isaku Yamahata
factor out the logic which converts io port address into pci device and offset in PCI configuration space. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: make pci configuration transaction more accurate.Isaku Yamahata
This patch sorts out/enhances pci code to track pci bus topology more accurately. - Track host bus bridge with pci domain number. Although the current qemu implementation supports only pci domian 0 yet. - Track pci bridge parent-child relationship. When looking down from pci host bus for pci sub bus, be aware of secondary bus/subordinate bus. Thus pci configuration transaction is more accurately emulated. This patch adds new member to PCIBus to track pci bus topology. Since qdev already tracks down bus relationship, those new member wouldn't be necessary. However it would be addressed later because not all the pci device isn't converted to qdev yet. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: remove bus_num member from struct PCIBus.Isaku Yamahata
Since It can be retrieved from pci configuration space, the member is unnecessary. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 08:50:55 +0000