aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-host/q35.c
AgeCommit message (Collapse)Author
2019-06-16q35: fix mmconfig and PCI0._CRSGerd Hoffmann
This patch changes the handling of the mmconfig area. Thanks to the pci(e) expander devices we already have the logic to exclude address ranges from PCI0._CRS. We can simply add the mmconfig address range to the list get it excluded as well. With that in place we can go with a fixed pci hole which covers the whole area from the end of (low) ram to the ioapic. This will make the whole logic alot less fragile. No matter where the firmware places the mmconfig xbar, things should work correctly. The guest also gets a bit more PCI address space (seabios boot): # cat /proc/iomem [ ... ] 7ffdd000-7fffffff : reserved 80000000-afffffff : PCI Bus 0000:00 <<-- this is new b0000000-bfffffff : PCI MMCONFIG 0000 [bus 00-ff] b0000000-bfffffff : reserved c0000000-febfffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:01.0 [ ... ] So this is a guest visible change. Cc: László Érsek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190607073429.3436-1-kraxel@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-02hw/pci-host: Use object_initialize_child for correct reference countingThomas Huth
Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object might not be properly cleaned up when the parent gets destroyed. Some functions of the pci-host devices miss to drop one of the references. Fix it by using object_initialize_child() instead, which takes care of calling object_initialize(), object_property_add_child() and object_unref() in the right order. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190430191552.4027-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-11-08Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* icount fix (Clement) * dumping fixes for non-volatile memory (Marc-André, myself) * x86 emulation fix (Rudolf) * recent Hyper-V CPUID flag (Vitaly) * Q35 doc fix (Daniel) * lsi fix (Prasad) * SCSI block limits emulation fixes (myself) * qemu_thread_atexit rework (Peter) * ivshmem memory leak fix (Igor) # gpg: Signature made Tue 06 Nov 2018 21:34:30 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: util/qemu-thread-posix: Fix qemu_thread_atexit* for OSX include/qemu/thread.h: Document qemu_thread_atexit* API scsi-generic: do not do VPD emulation for sense other than ILLEGAL_REQUEST scsi-generic: avoid invalid access to struct when emulating block limits scsi-generic: avoid out-of-bounds access to VPD page list scsi-generic: keep VPD page list sorted lsi53c895a: check message length value is valid scripts/dump-guest-memory: Synchronize with guest_phys_blocks_region_add memory-mapping: skip non-volatile memory regions in GuestPhysBlockList nvdimm: set non-volatile on the memory region memory: learn about non-volatile memory region target/i386: Clear RF on SYSCALL instruction MAINTAINERS: remove or downgrade myself to reviewer from some subsystems ivshmem: fix memory backend leak i386: clarify that the Q35 machine type implements a P35 chipset x86: hv_evmcs CPU flag support icount: fix deadlock when all cpus are sleeping Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-06i386: clarify that the Q35 machine type implements a P35 chipsetDaniel P. Berrangé
The 'q35' machine type implements an Intel Series 3 chipset, of which there are several variants: https://www.intel.com/Assets/PDF/datasheet/316966.pdf The key difference between the 82P35 MCH ('p35', PCI device ID 0x29c0) and 82Q35 GMCH ('q35', PCI device ID 0x29b0) variants is that the latter has an integrated graphics adapter. QEMU does not implement integrated graphics, so uses the PCI ID for the 82P35 chipset, despite calling the machine type 'q35'. Thus we rename the PCI device ID constant to reflect reality, to avoid confusing future developers. The new name more closely matches what pci.ids reports it to be: $ grep P35 /usr/share/hwdata/pci.ids | grep 29 29c0 82G33/G31/P35/P31 Express DRAM Controller 29c1 82G33/G31/P35/P31 Express PCI Express Root Port 29c4 82G33/G31/P35/P31 Express MEI Controller 29c5 82G33/G31/P35/P31 Express MEI Controller 29c6 82G33/G31/P35/P31 Express PT IDER Controller 29c7 82G33/G31/P35/P31 Express Serial KT Controller $ grep Q35 /usr/share/hwdata/pci.ids | grep 29 29b0 82Q35 Express DRAM Controller 29b1 82Q35 Express PCI Express Root Port 29b2 82Q35 Express Integrated Graphics Controller 29b3 82Q35 Express Integrated Graphics Controller 29b4 82Q35 Express MEI Controller 29b5 82Q35 Express MEI Controller 29b6 82Q35 Express PT IDER Controller 29b7 82Q35 Express Serial KT Controller Arguably the QEMU machine type should be named 'p35'. At this point in time, however, it is not worth the churn for management applications & documentation to worry about renaming it. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20180830105757.10577-1-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-05hw/pci-host/x86: extend the 64-bit PCI hole relative to the fw-assigned baseLaszlo Ersek
In commit 9fa99d2519cb ("hw/pci-host: Fix x86 Host Bridges 64bit PCI hole", 2017-11-16), we meant to expose such a 64-bit PCI MMIO aperture in the ACPI DSDT that would be at least as large as the new "pci-hole64-size" property (2GB on i440fx, 32GB on q35). The goal was to offer "enough" 64-bit MMIO aperture to the guest OS for hotplug purposes. In that commit, we added or modified five functions: - pc_pci_hole64_start(): shared between i440fx and q35. Provides a default 64-bit base, which starts beyond the cold-plugged 64-bit RAM, and skips the DIMM hotplug area too (if any). - i440fx_pcihost_get_pci_hole64_start(), q35_host_get_pci_hole64_start(): board-specific 64-bit base property getters called abstractly by the ACPI generator. Both of these fall back to pc_pci_hole64_start() if the firmware didn't program any 64-bit hole (i.e. if the firmware didn't assign a 64-bit GPA to any MMIO BAR on any device). Otherwise, they honor the firmware's BAR assignments (i.e., they treat the lowest 64-bit GPA programmed by the firmware as the base address for the aperture). - i440fx_pcihost_get_pci_hole64_end(), q35_host_get_pci_hole64_end(): these intended to extend the aperture to our size recommendation, calculated relative to the base of the aperture. Despite the original intent, i440fx_pcihost_get_pci_hole64_end() and q35_host_get_pci_hole64_end() currently only extend the aperture relative to the default base (pc_pci_hole64_start()), ignoring any programming done by the firmware. This means that our size recommendation may not be met. Fix it by honoring the firmware's address assignments. The strange extension sizes were spotted by Alex, in the log of a guest kernel running on top of OVMF (which prefers to assign 64-bit GPAs to 64-bit BARs). This change only affects DSDT generation, therefore no new compat property is being introduced. Using an i440fx OVMF guest with 5GB RAM, an example _CRS change is: > @@ -881,9 +881,9 @@ > QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, > 0x0000000000000000, // Granularity > 0x0000000800000000, // Range Minimum > - 0x000000080001C0FF, // Range Maximum > + 0x000000087FFFFFFF, // Range Maximum > 0x0000000000000000, // Translation Offset > - 0x000000000001C100, // Length > + 0x0000000080000000, // Length > ,, , AddressRangeMemory, TypeStatic) > }) > Device (GPE0) (On i440fx, the low RAM split is at 3GB, in this case. Therefore, with 5GB guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-3) = 6 GB. Adding the 2GB extension to that yields 8GB, which is below the firmware-programmed base of 32GB, before the patch. Therefore, before the patch, the extension is ineffective. After the patch, we add the 2GB extension to the firmware-programmed base, namely 32GB.) Using a q35 OVMF guest with 5GB RAM, an example _CRS change is: > @@ -3162,9 +3162,9 @@ > QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, > 0x0000000000000000, // Granularity > 0x0000000800000000, // Range Minimum > - 0x00000009BFFFFFFF, // Range Maximum > + 0x0000000FFFFFFFFF, // Range Maximum > 0x0000000000000000, // Translation Offset > - 0x00000001C0000000, // Length > + 0x0000000800000000, // Length > ,, , AddressRangeMemory, TypeStatic) > }) > Device (GPE0) (On Q35, the low RAM split is at 2GB. Therefore, with 5GB guest RAM and no DIMM hotplug range, pc_pci_hole64_start() returns 4 + (5-2) = 7 GB. Adding the 32GB extension to that yields 39GB (0x0000_0009_BFFF_FFFF + 1), before the patch. After the patch, we add the 32GB extension to the firmware-programmed base, namely 32GB.) The ACPI test data for the bios-tables-test case that we added earlier in this series are corrected too, as follows: > @@ -3339,9 +3339,9 @@ > QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, > 0x0000000000000000, // Granularity > 0x0000000200000000, // Range Minimum > - 0x00000009BFFFFFFF, // Range Maximum > + 0x00000009FFFFFFFF, // Range Maximum > 0x0000000000000000, // Translation Offset > - 0x00000007C0000000, // Length > + 0x0000000800000000, // Length > ,, , AddressRangeMemory, TypeStatic) > }) > Device (GPE0) Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Fixes: 9fa99d2519cbf71f871e46871df12cb446dc1c3e Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05hw/pci-host/x86: extract get_pci_hole64_start_value() helpersLaszlo Ersek
Expose the calculated "hole64 start" GPAs as plain uint64_t values, extracting the internals of the current property getters. This patch doesn't change behavior. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-10-26hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macroPhilippe Mathieu-Daudé
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/round.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir . --in-place Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20180705155811.20366-7-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-19target-i386: add q35 0xcf8 port as coalesced_pioPeng Hao
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Message-Id: <1539795177-21038-6-git-send-email-peng.hao2@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-23hw/pci-host/q35: Replace hardcoded value with macroZihan Yang
During smram region initialization some addresses are hardcoded, replace them with macro to be more clear to readers. Previous patch forgets about one value and exceeds the line limit of 90 characters. The v2 breaks a few long lines Signed-off-by: Zihan Yang <whois.zihan.yang@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-05pci: Rename root bus initialization functions for clarityDavid Gibson
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus() are misleadingly named. They're not used for initializing *any* PCI bus, but only for a root PCI bus. Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead created with a direct qbus_create_inplace() (see pci_bridge_initfn()). This patch renames the functions to make it clear they're only used for a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-11-16hw/pci-host: Fix x86 Host Bridges 64bit PCI holeMarcel Apfelbaum
Currently there is no MMIO range over 4G reserved for PCI hotplug. Since the 32bit PCI hole depends on the number of cold-plugged PCI devices and other factors, it is very possible is too small to hotplug PCI devices with large BARs. Fix it by reserving 2G for I4400FX chipset in order to comply with older Win32 Guest OSes and 32G for Q35 chipset. Even if the new defaults of pci-hole64-size will appear in "info qtree" also for older machines, the property was not implemented so no changes will be visible to guests. Note this is a regression since prev QEMU versions had some range reserved for 64bit PCI hotplug. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-31q35: use DIV_ROUND_UPMarc-André Lureau
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-06-22Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-06-09-v2' ↵Peter Maydell
into staging QAPI patches for 2017-06-09 # gpg: Signature made Tue 20 Jun 2017 13:31:39 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2017-06-09-v2: (41 commits) tests/qdict: check more get_try_int() cases console: use get_uint() for "head" property i386/cpu: use get_uint() for "min-level"/"min-xlevel" properties numa: use get_uint() for "size" property pnv-core: use get_uint() for "core-pir" property pvpanic: use get_uint() for "ioport" property auxbus: use get_uint() for "addr" property arm: use get_uint() for "mp-affinity" property xen: use get_uint() for "max-ram-below-4g" property pc: use get_uint() for "hpet-intcap" property pc: use get_uint() for "apic-id" property pc: use get_uint() for "iobase" property acpi: use get_uint() for "pci-hole*" properties acpi: use get_uint() for various acpi properties acpi: use get_uint() for "acpi-pcihp-io*" properties platform-bus: use get_uint() for "addr" property bcm2835_fb: use {get, set}_uint() for "vcram-size" and "vcram-base" aspeed: use {set, get}_uint() for "ram-size" property pcihp: use get_uint() for "bsel" property pc-dimm: make "size" property uint64 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-20qdev: Use appropriate getter/setters typeMarc-André Lureau
Based on the underlying type of the data accessed, use the appropriate getters/setters: * AcpiPmInfo members s3_disabled, s4_disabled are bool, member s4_val is an uint8_t * Property ACPI_PCIHP_IO_PROP is defined with object_property_add_uint32_ptr() * Property PCIE_HOST_MCFG_SIZE is implemented with visit_type_uint64() * PCIDevice property "addr" is backed by PCIDevice member devfn, which is an int32_t Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-20-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [More verbose commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20object: use more specific property type namesMarc-André Lureau
Use the actual unsigned integer type name. The type name change impacts the following externally visible area: * vl.c's machine_help_func() puts it in help for -machine NAME,help. * QMP command qom-list exposes it in ObjectPropertyInfo member @type. * QMP command device-list-properties exposes it in DevicePropertyInfo member @type. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-15-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-20q35: fix get_mmcfg_size to use uint64 visitorMarc-André Lureau
e->size is hwaddr, i.e. uint64_t. We silently truncate. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20170607163635.17635-14-marcandre.lureau@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-16q35/mch: implement extended TSEG sizesLaszlo Ersek
The q35 machine type currently lets the guest firmware select a 1MB, 2MB or 8MB TSEG (basically, SMRAM) size. In edk2/OVMF, we use 8MB, but even that is not enough when a lot of VCPUs (more than approx. 224) are configured -- SMRAM footprint scales largely proportionally with VCPU count. Introduce a new property for "mch" called "extended-tseg-mbytes", which expresses (in megabytes) the user's choice of TSEG (SMRAM) size. Invent a new, QEMU-specific register in the config space of the DRAM Controller, at offset 0x50, in order to allow guest firmware to query the TSEG (SMRAM) size. According to Intel Document Number 316966-002, Table 5-1 "DRAM Controller Register Address Map (D0:F0)": Warning: Address locations that are not listed are considered Intel Reserved registers locations. Reads to Reserved registers may return non-zero values. Writes to reserved locations may cause system failures. All registers that are defined in the PCI 2.3 specification, but are not necessary or implemented in this component are simply not included in this document. The reserved/unimplemented space in the PCI configuration header space is not documented as such in this summary. Offsets 0x50 and 0x51 are not listed in Table 5-1. They are also not part of the standard PCI config space header. And they precede the capability list as well, which starts at 0xe0 for this device. When the guest writes value 0xffff to this register, the value that can be read back is that of "mch.extended-tseg-mbytes" -- unless it remains 0xffff. The guest is required to write 0xffff first (as opposed to a read-only register) because PCI config space is generally not cleared on QEMU reset, and after S3 resume or reboot, new guest firmware running on old QEMU could read a guest OS-injected value from this register. After reading the available "extended" TSEG size, the guest firmware may actually request that TSEG size by writing pattern 11b to the ESMRAMC register's TSEG_SZ bit-field. (The Intel spec referenced above defines only patterns 00b (1MB), 01b (2MB) and 10b (8MB); 11b is reserved.) On the QEMU command line, the value can be set with -global mch.extended-tseg-mbytes=N The default value for 2.10+ q35 machine types is 16. The value is limited to 0xfff (4095) at the moment, purely so that the product (4095 MB) can be stored to the uint32_t variable "tseg_size" in mch_update_smram(). Users are responsible for choosing sensible TSEG sizes. On 2.9 and earlier q35 machine types, the default value is 0. This lets the 11b bit pattern in ESMRAMC.TSEG_SZ, and the register at offset 0x50, keep their original behavior. When "extended-tseg-mbytes" is nonzero, the new register at offset 0x50 is set to that value on reset, for completeness. PCI config space is migrated automatically, so no VMSD changes are necessary. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1447027 Ref: https://lists.01.org/pipermail/edk2-devel/2017-May/010456.html Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-04range: Eliminate direct Range member accessMarkus Armbruster
Users of struct Range mess liberally with its members, which makes refactoring hard. Create a set of methods, and convert all users to call them instead of accessing members. The methods have carefully worded contracts, and use assertions to check them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04pc: Eliminate PcPciInfoMarkus Armbruster
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and w64 is the PCI64 hole. Three users: * I440FXState and MCHPCIState have a member PcPciInfo pci_info, but only pci_info.w32 is actually used. This is confusing. Replace by Range pci_hole. * acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes from acpi_get_pci_info() to build_dsdt(). Replace by two variables Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to acpi_get_pci_holes(). PcPciInfo is now unused; drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-04machine: remove iommu propertyMarcel Apfelbaum
Since iommu devices can be created with '-device' there is no need to keep iommu as machine and mch property. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04hw/iommu: enable iommu with -deviceMarcel Apfelbaum
Use the standard '-device intel-iommu' to create the IOMMU device. The legacy '-machine,iommu=on' can still be used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04q35: allow dynamic sysbusMarcel Apfelbaum
Allow adding sysbus devices with -device on Q35. At first Q35 will support only intel-iommu to be added this way, however the command line will support all sysbus devices. Mark with 'cannot_instantiate_with_device_add_yet' the ones causing immediate problems (e.g. crashes). Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-29Q35: implement property interfece to several parametersEfimov Vasily
During creation of Q35 instance several parameters are set using direct access. It violates Qemu device model. Correctly, the parameters should be handled as object properties. The patch adds four link type properties for fields: mch.ram_memory mch.pci_address_space mch.system_memory mch.address_space_io And, it adds two size type properties for fields: mch.below_4g_mem_size mch.above_4g_mem_size Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2015-11-17q35: Check propery to determine if iommu is setBandan Das
The helper function machine_iommu() isn't necesary. We can directly check for the property. Signed-off-by: Bandan Das <bsd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com>
2015-10-18intel_iommu: Add support for translation for devices behind bridgesKnut Omang
- Use a hash table indexed on bus pointers to store information about buses instead of using the bus numbers. Bus pointers are stored in a new VTDBus struct together with the vector of device address space pointers indexed by devfn. - The bus number is still used for lookup for selective SID based invalidate, in which case the bus number is lazily resolved from the bus hash table and cached in a separate index. Signed-off-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-05q35: implement TSEGGerd Hoffmann
TSEG provides larger amounts of SMRAM than the 128 KB available with legacy SMRAM and high SMRAM. Route access to tseg into nowhere when enabled, for both cpus and busmaster dma, and add tseg window to smram region, so cpus can access it in smm mode. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: implement SMRAM.D_LCKGerd Hoffmann
Once the SMRAM.D_LCK bit has been set by the guest several bits in SMRAM and ESMRAMC become readonly until the next machine reset. Implement this by updating the wmask accordingly when the guest sets the lock bit. As the lock it itself is locked down too we don't need to worry about the guest clearing the lock bit. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: add config space wmask for SMRAM and ESMRAMCGerd Hoffmann
Not all bits in SMRAM and ESMRAMC can be changed by the guest. Add wmask defines accordingly and set them in mch_reset(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: fix ESMRAMC defaultGerd Hoffmann
The cache bits in ESMRAMC are hardcoded to 1 (=disabled) according to the q35 mch specs. Add and use a define with this default. While being at it also update the SMRAM default to use the name (no code change, just makes things a bit more readable). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: implement high SMRAMPaolo Bonzini
When H_SMRAME is 1, low memory at 0xa0000 is left alone by SMM, and instead the chipset maps the 0xa0000-0xbffff window at 0xfeda0000-0xfedbffff. This affects both the "non-SMM" view controlled by D_OPEN and the SMM view controlled by G_SMRAME, so add two new MemoryRegions and toggle the enabled/disabled state of all four in mch_update_smram. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05hw/i386: remove smram_updatePaolo Bonzini
It's easier to inline it now that most of its work is done by the CPU (rather than the chipset) through /machine/smram and the memory API. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05target-i386: use memory API to implement SMRAMPaolo Bonzini
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU address space gets an extra region which is an alias of /machine/smram. This extra region is enabled or disabled as the CPU enters/exits SMM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05hw/i386: add a separate region that tracks the SMRAME bitPaolo Bonzini
This region is exported at /machine/smram. It is "empty" if SMRAME=0 and points to SMRAM if SMRAME=1. The CPU will enable/disable it as it enters or exits SMRAM. While touching nearby code, the existing memory region setup was slightly inconsistent. The smram_region is *disabled* in order to open SMRAM (because the smram_region shows the low VRAM instead of the RAM at 0xa0000). Because SMRAM is closed at startup, the smram_region must be enabled when creating the i440fx or q35 devices. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11machine: replace qemu opts with iommu propertyMarcel Apfelbaum
Fixes a QEMU crash when passing iommu parameter in command line. Running x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm leads to crash: qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper: Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted (core dumped) This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed the global option descriptions and moved them to MachineState's QOM properties. Fix this by querying machine properties through designated wrappers. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-08-28intel-iommu: add context-cache to cache context-entryLe Tan
Add context-cache to cache context-entry encountered on a page-walk. Each VTDAddressSpace has a member of VTDContextCacheEntry which represents an entry in the context-cache. Since devices with different bus_num and devfn have their respective VTDAddressSpace, this will be a good way to reference the cached entries. Each VTDContextCacheEntry will have a context_cache_gen and the cached entry is valid only when context_cache_gen equals IntelIOMMUState.context_cache_gen. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-28intel-iommu: fix coding style issues around in q35.c and machine.cLe Tan
Fix coding style issues around in hw/pci-host/q35.c and hw/core/machine.c. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-28intel-iommu: add Intel IOMMU emulation to q35 and add a machine option ↵Le Tan
"iommu" as a switch Add Intel IOMMU emulation to q35 chipset and expose it to the guest. 1. Add a machine option. Users can use "-machine iommu=on|off" in the command line to enable/disable Intel IOMMU. The default is off. 2. Accroding to the machine option, q35 will initialize the Intel IOMMU and use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for the pci bus. 3. q35_host_dma_iommu() will return different address space according to the bus_num and devfn of the device. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-15pci-host: update obsolete reference about piix_pci.cGonglei
piix_pci.c has been renamed into piix.c at commit c0907c9e6417cb959dfd9ef6873221536ec91351 update the obsolete reference. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21pcie_host: Turn pcie_host_init() into an instance_initAndreas Färber
This assures the trivial field initialization is applied for any derived type - currently only Q35PCIHost. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-11q35: Correct typo BRDIGE -> BRIDGEBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23pci-host: Consistently set cannot_instantiate_with_device_add_yetMarkus Armbruster
Many PCI host bridges consist of a sysbus device and a PCI device. You need both for the thing to work. Arguably, these bridges should be modelled as a single, composite devices instead of pairs of seemingly independent devices you can only use together, but we're not there, yet. Since the sysbus part can't be instantiated with device_add, yet, permitting it with the PCI part is useless. We shouldn't offer useless options to the user, so let's set cannot_instantiate_with_device_add_yet for them. It's already set for Bonito, Grackle, i440FX and Raven. Document why. Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch, pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp, uni-north-internal-pci, uni-north-pci, and versatile_pci_host. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-11 12:54:16 +0000