aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-host/q35.c
AgeCommit message (Collapse)Author
2016-07-04range: Eliminate direct Range member accessMarkus Armbruster
Users of struct Range mess liberally with its members, which makes refactoring hard. Create a set of methods, and convert all users to call them instead of accessing members. The methods have carefully worded contracts, and use assertions to check them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04pc: Eliminate PcPciInfoMarkus Armbruster
PcPciInfo has two (ill-named) members: Range w32 is the PCI hole, and w64 is the PCI64 hole. Three users: * I440FXState and MCHPCIState have a member PcPciInfo pci_info, but only pci_info.w32 is actually used. This is confusing. Replace by Range pci_hole. * acpi_build() uses auto PcPciInfo pci_info to forward both PCI holes from acpi_get_pci_info() to build_dsdt(). Replace by two variables Range pci_hole, pci_hole64. Rename acpi_get_pci_info() to acpi_get_pci_holes(). PcPciInfo is now unused; drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-07-04machine: remove iommu propertyMarcel Apfelbaum
Since iommu devices can be created with '-device' there is no need to keep iommu as machine and mch property. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04hw/iommu: enable iommu with -deviceMarcel Apfelbaum
Use the standard '-device intel-iommu' to create the IOMMU device. The legacy '-machine,iommu=on' can still be used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04q35: allow dynamic sysbusMarcel Apfelbaum
Allow adding sysbus devices with -device on Q35. At first Q35 will support only intel-iommu to be added this way, however the command line will support all sysbus devices. Mark with 'cannot_instantiate_with_device_add_yet' the ones causing immediate problems (e.g. crashes). Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-29Q35: implement property interfece to several parametersEfimov Vasily
During creation of Q35 instance several parameters are set using direct access. It violates Qemu device model. Correctly, the parameters should be handled as object properties. The patch adds four link type properties for fields: mch.ram_memory mch.pci_address_space mch.system_memory mch.address_space_io And, it adds two size type properties for fields: mch.below_4g_mem_size mch.above_4g_mem_size Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2015-11-17q35: Check propery to determine if iommu is setBandan Das
The helper function machine_iommu() isn't necesary. We can directly check for the property. Signed-off-by: Bandan Das <bsd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com>
2015-10-18intel_iommu: Add support for translation for devices behind bridgesKnut Omang
- Use a hash table indexed on bus pointers to store information about buses instead of using the bus numbers. Bus pointers are stored in a new VTDBus struct together with the vector of device address space pointers indexed by devfn. - The bus number is still used for lookup for selective SID based invalidate, in which case the bus number is lazily resolved from the bus hash table and cached in a separate index. Signed-off-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-05q35: implement TSEGGerd Hoffmann
TSEG provides larger amounts of SMRAM than the 128 KB available with legacy SMRAM and high SMRAM. Route access to tseg into nowhere when enabled, for both cpus and busmaster dma, and add tseg window to smram region, so cpus can access it in smm mode. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: implement SMRAM.D_LCKGerd Hoffmann
Once the SMRAM.D_LCK bit has been set by the guest several bits in SMRAM and ESMRAMC become readonly until the next machine reset. Implement this by updating the wmask accordingly when the guest sets the lock bit. As the lock it itself is locked down too we don't need to worry about the guest clearing the lock bit. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: add config space wmask for SMRAM and ESMRAMCGerd Hoffmann
Not all bits in SMRAM and ESMRAMC can be changed by the guest. Add wmask defines accordingly and set them in mch_reset(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: fix ESMRAMC defaultGerd Hoffmann
The cache bits in ESMRAMC are hardcoded to 1 (=disabled) according to the q35 mch specs. Add and use a define with this default. While being at it also update the SMRAM default to use the name (no code change, just makes things a bit more readable). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05q35: implement high SMRAMPaolo Bonzini
When H_SMRAME is 1, low memory at 0xa0000 is left alone by SMM, and instead the chipset maps the 0xa0000-0xbffff window at 0xfeda0000-0xfedbffff. This affects both the "non-SMM" view controlled by D_OPEN and the SMM view controlled by G_SMRAME, so add two new MemoryRegions and toggle the enabled/disabled state of all four in mch_update_smram. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05hw/i386: remove smram_updatePaolo Bonzini
It's easier to inline it now that most of its work is done by the CPU (rather than the chipset) through /machine/smram and the memory API. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05target-i386: use memory API to implement SMRAMPaolo Bonzini
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU address space gets an extra region which is an alias of /machine/smram. This extra region is enabled or disabled as the CPU enters/exits SMM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05hw/i386: add a separate region that tracks the SMRAME bitPaolo Bonzini
This region is exported at /machine/smram. It is "empty" if SMRAME=0 and points to SMRAM if SMRAME=1. The CPU will enable/disable it as it enters or exits SMRAM. While touching nearby code, the existing memory region setup was slightly inconsistent. The smram_region is *disabled* in order to open SMRAM (because the smram_region shows the low VRAM instead of the RAM at 0xa0000). Because SMRAM is closed at startup, the smram_region must be enabled when creating the i440fx or q35 devices. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11machine: replace qemu opts with iommu propertyMarcel Apfelbaum
Fixes a QEMU crash when passing iommu parameter in command line. Running x86_64-softmmu/qemu-system-x86_64 -machine pc,iommu=on -enable-kvm leads to crash: qemu-system-x86_64: qemu/util/qemu-option.c:387: qemu_opt_get_bool_helper: Assertion `opt->desc && opt->desc->type == QEMU_OPT_BOOL' failed. Aborted (core dumped) This happens because commit e79d5a6 ("machine: remove qemu_machine_opts global list") removed the global option descriptions and moved them to MachineState's QOM properties. Fix this by querying machine properties through designated wrappers. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-08-28intel-iommu: add context-cache to cache context-entryLe Tan
Add context-cache to cache context-entry encountered on a page-walk. Each VTDAddressSpace has a member of VTDContextCacheEntry which represents an entry in the context-cache. Since devices with different bus_num and devfn have their respective VTDAddressSpace, this will be a good way to reference the cached entries. Each VTDContextCacheEntry will have a context_cache_gen and the cached entry is valid only when context_cache_gen equals IntelIOMMUState.context_cache_gen. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-28intel-iommu: fix coding style issues around in q35.c and machine.cLe Tan
Fix coding style issues around in hw/pci-host/q35.c and hw/core/machine.c. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-28intel-iommu: add Intel IOMMU emulation to q35 and add a machine option ↵Le Tan
"iommu" as a switch Add Intel IOMMU emulation to q35 chipset and expose it to the guest. 1. Add a machine option. Users can use "-machine iommu=on|off" in the command line to enable/disable Intel IOMMU. The default is off. 2. Accroding to the machine option, q35 will initialize the Intel IOMMU and use pci_setup_iommu() to setup q35_host_dma_iommu() as the IOMMU function for the pci bus. 3. q35_host_dma_iommu() will return different address space according to the bus_num and devfn of the device. Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-15pci-host: update obsolete reference about piix_pci.cGonglei
piix_pci.c has been renamed into piix.c at commit c0907c9e6417cb959dfd9ef6873221536ec91351 update the obsolete reference. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-21pcie_host: Turn pcie_host_init() into an instance_initAndreas Färber
This assures the trivial field initialization is applied for any derived type - currently only Q35PCIHost. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-11q35: Correct typo BRDIGE -> BRIDGEBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-23pci-host: Consistently set cannot_instantiate_with_device_add_yetMarkus Armbruster
Many PCI host bridges consist of a sysbus device and a PCI device. You need both for the thing to work. Arguably, these bridges should be modelled as a single, composite devices instead of pairs of seemingly independent devices you can only use together, but we're not there, yet. Since the sysbus part can't be instantiated with device_add, yet, permitting it with the PCI part is useless. We shouldn't offer useless options to the user, so let's set cannot_instantiate_with_device_add_yet for them. It's already set for Bonito, Grackle, i440FX and Raven. Document why. Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch, pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp, uni-north-internal-pci, uni-north-pci, and versatile_pci_host. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-10pc: map PCI address space as catchall region for not mapped addressesMichael S. Tsirkin
With a help of negative memory region priority PCI address space is mapped underneath RAM regions effectively catching every access to addresses not mapped by any other region. It simplifies PCI address space mapping into system address space. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
2013-11-10Fix pc migration from qemu <= 1.5Cole Robinson
The following commit introduced a migration incompatibility: commit 568f0690fd9aa4d39d84b04c1a5dbb53a915c3fe Author: David Gibson <david@gibson.dropbear.id.au> Date: Thu Jun 6 18:48:49 2013 +1000 pci: Replace pci_find_domain() with more general pci_root_bus_path() The issue is that i440fx savevm idstr went from 0000:00:00.0/I440FX to 0000:00.0/I440FX. Unfortunately we are stuck with the breakage for 1.6 machine types. Add a compat property to maintain the busted idstr for the 1.6 machine types, but revert to the old style format for 1.7+, and <= 1.5. Tested with migration from qemu 1.5, qemu 1.6, and qemu.git. Cc: qemu-stable@nongnu.org Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-31Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci, pc, acpi fixes, enhancements This includes some pretty big changes: - pci master abort support by Marcel - pci IRQ API rework by Marcel - acpi generation support by myself Everything has gone through several revisions, latest versions have been on list for a while without any more comments, tested by several people. Please pull for 1.7. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found * mst/tags/for_anthony: (39 commits) ssdt-proc: update generated file ssdt: fix PBLK length i386: ACPI table generation code from seabios pc: use new api to add builtin tables acpi: add interface to access user-installed tables hpet: add API to find it pvpanic: add API to access io port ich9: APIs for pc guest info piix: APIs for pc guest info acpi/piix: add macros for acpi property names i386: define pc guest info loader: allow adding ROMs in done callbacks i386: add bios linker/loader loader: use file path size from fw_cfg.h acpi: ssdt pcihp: updat generated file acpi: pre-compiled ASL files acpi: add rules to compile ASL source i386: add ACPI table files from seabios q35: expose mmcfg size as a property q35: use macro for MCFG property name ... Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-14ich9: APIs for pc guest infoMichael S. Tsirkin
This adds APIs that will be used to fill in acpi tables, implemented using QOM, to various ich9 components. Some information is still missing in QOM, so we fall back on lookups by type instead. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14q35: expose mmcfg size as a propertyMichael S. Tsirkin
Address is already exposed, expose size for symmetry. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14q35: use macro for MCFG property nameMichael S. Tsirkin
Useful to make it accessible through QOM. Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-30Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc,pci,virtio fixes and cleanups This includes pc and pci cleanups and enhancements, and a virtio-net bugfix related to softmac programming. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (8) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: smbios: Factor out smbios_maybe_add_str() smbios: Make multiple -smbios type= accumulate sanely smbios: Improve diagnostics for conflicting entries smbios: Convert to QemuOpts smbios: Normalize smbios_entry_add()'s error handling to exit(1) virtio-net: fix up HMP NIC info string on reset pci: remove explicit check to 64K ioport size piix4: disable io on reset piix: use 64 bit window programmed by guest q35: use 64 bit window programmed by guest pci: add helper to retrieve the 64-bit range range: add min/max operations on ranges range: add Range to typedefs q35: make pci window address/size match guest cfg Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
2013-09-20q35: Fix typo in constant DEFUALT -> DEFAULT.Richard W.M. Jones
Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-09-15q35: use 64 bit window programmed by guestMichael S. Tsirkin
Detect the 64 bit window programmed by firmware and configure properties accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-15q35: make pci window address/size match guest cfgMichael S. Tsirkin
For Q35, MMCFG address and size are guest configurable. Update w32 property to make it behave accordingly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-03Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc,pci,virtio fixes and cleanups This includes pc and pci cleanups and enhancements, and a virtio bugfix for level interrupts. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (3) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: virtio_pci: fix level interrupts with irqfd pc: reduce duplication, fix PIIX descriptions hw: Clean up bogus default boot order pci: add config space access traces pc: fix regression for 64 bit PCI memory pci: Introduce helper to retrieve a PCI device's DMA address space Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-30qom: Pass available size to object_initialize()Andreas Färber
To be passed on to object_initialize_with_type(). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-27pc: fix regression for 64 bit PCI memoryMichael S. Tsirkin
commit 398489018183d613306ab022653552247d93919f pc: limit 64 bit hole to 2G by default introduced a way for management to control the window allocated to the 64 bit PCI hole. This is useful, but existing management tools do not know how to set this property. As a result, e.g. specifying a large ivshmem device with size > 4G is broken by default. For example this configuration no longer works: -device ivshmem,size=4294967296,chardev=cfoo -chardev socket,path=/tmp/sock,id=cfoo,server,nowait Fix this by detecting that hole size was not specified and defaulting to the backwards-compatible value of 1 << 62. Cc: qemu-stable@nongnu.org Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29pc: limit 64 bit hole to 2G by defaultIgor Mammedov
It turns out that some 32 bit windows guests crash if 64 bit PCI hole size is >2G. Limit it to 2G for piix and q35 by default. User may override default 64-bit PCI hole size by using "pci-hole64-size" property. Examples: -global i440FX-pcihost.pci-hole64-size=4G -global q35-pcihost.pci-hole64-size=4G Reported-by: Igor Mammedov <imammedo@redhat.com>, Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23q35: Use QOM realize for q35 host bridgeHu Tao
And split off MemoryRegion initialization into instance_init. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23q35: Use type-safe cast instead of direct access of parent devHu Tao
And remove variables if possible. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Converted remaining access and renamed to parent_obj] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-08Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci,misc enhancements This includes some pci enhancements: Better support for systems with multiple PCI root buses FW cfg interface for more robust pci programming in BIOS Minor fixes/cleanups for fw cfg and cross-version migration - because of dependencies with other patches Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By David Gibson (10) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: Fold host_buses list into PCIHostState functionality pci: Remove domain from PCIHostBus pci: Simpler implementation of primary PCI bus pci: Add root bus parameter to pci_nic_init() pci: Add root bus argument to pci_get_bus_devfn() pci: Replace pci_find_domain() with more general pci_root_bus_path() pci: Use helper to find device's root bus in pci_find_domain() pci: Abolish pci_find_root_bus() pci: Move pci_read_devaddr to pci-hotplug-old.c pci: Cleanup configuration for pci-hotplug.c pvpanic: fix fwcfg for big endian hosts pvpanic: initialization cleanup MAINTAINERS: s/Marcelo/Paolo/ e1000: cleanup process_tx_desc pc_piix: cleanup init compat handling pc: pass PCI hole ranges to Guests pci: store PCI hole ranges in guestinfo structure range: add Range structure Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-07pci: Replace pci_find_domain() with more general pci_root_bus_path()David Gibson
pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04hw/p*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 10:47:10 +0000