aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-host/astro.c
AgeCommit message (Collapse)Author
2024-02-11hw/pci-host/astro: Implement Hard Fail and Soft Fail modeHelge Deller
The Astro/Elroy chip can work in either Hard-Fail or Soft-Fail mode. Hard fail means the system bus will send an HPMC (=crash) to the processor, soft fail means the system bus will ignore timeouts of MMIO-reads or MMIO-writes and return -1ULL. The HF mode is controlled by a bit in the status register and is usually programmed by the OS. Return the corresponing values based on the current value of that bit. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2024-02-11hw/pci-host/astro: Avoid aborting on access failureHelge Deller
Instead of stopping the emulation, report a MEMTX_DECODE_ERROR if the OS tries to access non-existent registers. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2024-01-16Merge tag 'hppa-fixes-8.2-pull-request' of ↵Peter Maydell
https://github.com/hdeller/qemu-hppa into staging target/hppa qemu v8.2 regression fixes There were some regressions introduced with Qemu v8.2 on the hppa/hppa64 target, e.g.: - 32-bit HP-UX crashes on B160L (32-bit) machine - NetBSD boot failure due to power button in page zero - NetBSD FPU detection failure - OpenBSD 7.4 boot failure This patch series fixes those known regressions and additionally: - allows usage of the max. 3840MB of memory (instead of 3GB), - adds support for the qemu --nodefaults option (to debug other devices) This patch set will not fix those known (non-regression) bugs: - HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine - Linux kernel will still fail to boot on C3700 as long as kernel modules are used. Changes v2->v3: - Added comment about Figures H-10 and H-11 in the parisc2.0 spec in patch which calculate PDC address translation if PSW.W=0 - Introduce and use hppa_set_ior_and_isr() - Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check if default devices should be created - Added Tested-by and Reviewed-by tags Changes v1->v2: - fix OpenBSD boot with SeaBIOS v15 instead of v14 - commit message enhancements suggested by BALATON Zoltan - use uint64_t for ram_max in patch #1 # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP # X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM # nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc= # =FAMY # -----END PGP SIGNATURE----- # gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa: target/hppa: Update SeaBIOS-hppa to version 15 target/hppa: Fix IOR and ISR on error in probe target/hppa: Fix IOR and ISR on unaligned access trap target/hppa: Export function hppa_set_ior_and_isr() target/hppa: Avoid accessing %gr0 when raising exception hw/hppa: Move software power button address back into PDC target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0 hw/pci-host/astro: Add missing astro & elroy registers for NetBSD hw/hppa/machine: Disable default devices with --nodefaults option hw/hppa/machine: Allow up to 3840 MB total memory Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-13hw/pci-host/astro: Add missing astro & elroy registers for NetBSDHelge Deller
NetBSD accesses some astro and elroy registers which aren't accessed by Linux yet. Add emulation for those registers to allow NetBSD to boot further. Please note that this patch is not sufficient to completely boot up NetBSD on the 64-bit C3700 machine yet. Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Bruno Haible <bruno@clisp.org>
2023-12-30hw/pci-host: Constify VMStateRichard Henderson
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-47-richard.henderson@linaro.org>
2023-11-13hw/pci-host/astro: Fix boot for C3700 machineHelge Deller
Apply the "32-bit PCI addressing on 40-bit Runway" as the default iommu transformation. This allows PCI devices to dma PDC memory. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-11-07Merge tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu into stagingStefan Hajnoczi
target/hppa: Implement PA2.0 instructions hw/hppa: Map astro chip 64-bit I/O mem hw/hppa: Turn on 64-bit cpu for C3700 # -----BEGIN PGP SIGNATURE----- # # iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmVJqDEdHHJpY2hhcmQu # aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8n5Qf/R15CvXGMgjDJjoV2 # ILMFM+Rpg17SR2yu060sEZ01R3iHdobeCcDB184K0RI9JLrpcBFar+PeF023o9fn # O9MnfIyL6/ggzaeIpQ9AD2uT0HJMU9hLFoyQqQvnhDHHcT34raL2+Zkrkb2vvauH # XET7awXN9xYCnY4ALrfcapzlrHqI77ahz0vReUWPxk7eGY2ez8dEOiFW2WLBmuMx # mAFAMrFQhq66GjoMDl8JiGHD/KBJQ9X4eUAEotS27lTCOYU0ryA6dWBGqBSTWCUa # smpxkeGQKOew+717HV1H4FdCRYG1Rgm7yFN423JULeew+T7DHvfe0K55vMIulx5I # g3oVZA== # =dxC7 # -----END PGP SIGNATURE----- # gpg: Signature made Tue 07 Nov 2023 11:00:01 HKT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-pa-20231106' of https://gitlab.com/rth7680/qemu: (85 commits) hw/hppa: Allow C3700 with 64-bit and B160L with 32-bit CPU only hw/hppa: Turn on 64-bit CPU for C3700 machine hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memory hw/pci-host/astro: Map Astro chip into 64-bit I/O memory region target/hppa: Improve interrupt logging target/hppa: Update IIAOQ, IIASQ for pa2.0 target/hppa: Create raise_exception_with_ior target/hppa: Add unwind_breg to CPUHPPAState target/hppa: Clear upper bits in mtctl for pa1.x target/hppa: Avoid async_safe_run_on_cpu on uniprocessor system target/hppa: Add pa2.0 cpu local tlb flushes target/hppa: Implement pa2.0 data prefetch instructions linux-user/hppa: Drop EXCP_DUMP from handled exceptions hw/hppa: Translate phys addresses for the cpu include/hw/elf: Remove truncating signed casts target/hppa: Return zero for r0 from load_gpr target/hppa: Precompute zero into DisasContext target/hppa: Fix interruption based on default PSW target/hppa: Implement PERMH target/hppa: Implement MIXH, MIXW ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-06hw/pci-host/astro: Trigger CPU irq on CPU HPA in high memoryHelge Deller
The CPU HPA is in the high F-region on PA2.0 CPUs, so use F_EXTEND() to trigger interrupt request at the right CPU HPA address. Note that the cpu_hpa value comes out of the IRT, which doesn't store the higher addresss bits. Signed-off-by: Helge Deller <deller@gmx.de>
2023-11-06hw/pci-host/astro: Map Astro chip into 64-bit I/O memory regionHelge Deller
Map Astro into high F-region and add alias for 32-bit OS in low region. Signed-off-by: Helge Deller <deller@gmx.de>
2023-11-03hw/pci: modify pci_setup_iommu() to set PCIIOMMUOpsYi Liu
This patch modifies pci_setup_iommu() to set PCIIOMMUOps instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to get an address space for a PCI device in vendor specific way. The PCIIOMMUOps still offers this functionality. But using PCIIOMMUOps leaves space to add more iommu related vendor specific operations. Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Peter Xu <peterx@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Yi Sun <yi.y.sun@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Hervé Poussineau <hpoussin@reactos.org> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: BALATON Zoltan <balaton@eik.bme.hu> Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com> Cc: Jagannathan Raman <jag.raman@oracle.com> Cc: Matthew Rosato <mjrosato@linux.ibm.com> Cc: Eric Farman <farman@linux.ibm.com> Cc: Halil Pasic <pasic@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Thomas Huth <thuth@redhat.com> Cc: Helge Deller <deller@gmx.de> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> [ clg: - refreshed on latest QEMU - included hw/remote/iommu.c - documentation update - asserts in pci_setup_iommu() - removed checks on iommu_bus->iommu_ops->get_address_space - included Elroy PCI host (PA-RISC) ] Signed-off-by: Cédric Le Goater <clg@redhat.com>
2023-10-20hw/pci-host: Add Astro system bus adapter found on PA-RISC machinesHelge Deller
The 64-bit PA-RISC machines use a Astro system bus adapter (SBA) with Elroy PCI host chips. Later generation Astro chips were named Pluto, Ike and REO. Signed-off-by: Helge Deller <deller@gmx.de>