aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-bridge
AgeCommit message (Collapse)Author
2024-11-04hw/pci-bridge: Make pxb_dev_realize_common() return if it succeededJonathan Cameron
For the CXL PXB there is additional code after pxb_dev_realize_common() is called. If that realize failed (e.g. due to an out of range numa_node) we will get a segfault. Return a bool so the caller can check if the pxb_dev_realize_common() succeeded or not without having to poke around in the errp. Fixes: 4f8db8711cbd ("hw/pxb: Allow creation of a CXL PXB (host bridge)") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20241014121902.2146424-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-04hw/pci-bridge/cxl-upstream: Add properties to control link speed and widthJonathan Cameron
To establish performance characteristics of a CXL device when used via a particular CXL topology (root ports, switches, end points) it is necessary to set the appropriate link speed and width in the PCI Express capability structure. Provide x-speed and x-link properties for this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240916173518.1843023-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-04hw/pci-bridge/cxl_upstream: Provide x-speed and x-width properties.Jonathan Cameron
Copied from gen_pcie_root_port.c Drop the previous code that ensured a valid value in s->width, s->speed as now a default is provided so this will always be set. Note this changes the default settings but it is unlikely to have a negative effect on software as will only affect ports with now downstream device. All other ports will use the settings from that device. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240916173518.1843023-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-04hw/pci-bridge/cxl_root_port: Provide x-speed and x-width properties.Jonathan Cameron
Approach copied from gen_pcie_root_port.c Previously the link defaulted to a maximum of 2.5GT/s and 1x. Enable setting it's maximum values. The actual value after 'training' will depend on the downstream device configuration. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240916173518.1843023-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2024-11-04hw/acpi: Generic Port Affinity Structure supportJonathan Cameron
These are very similar to the recently added Generic Initiators but instead of representing an initiator of memory traffic they represent an edge point beyond which may lie either targets or initiators. Here we add these ports such that they may be targets of hmat_lb records to describe the latency and bandwidth from host side initiators to the port. A discoverable mechanism such as UEFI CDAT read from CXL devices and switches is used to discover the remainder of the path, and the OS can build up full latency and bandwidth numbers as need for work and data placement decisions. Acked-by: Markus Armbruster <armbru@redhat.com> Tested-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240916174122.1843197-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-04hw/pci-bridge: Add acpi_uid property to TYPE_PXB_BUSJonathan Cameron
Enable ACPI table creation for PCI Expander Bridges to be independent of PCI internals. Note that the UID is currently the PCI bus number. This is motivated by the forthcoming ACPI Generic Port SRAT entries which can be made completely independent of PCI internals. Suggested-by: Igor Mammedov <imammedo@redhat.com> Tested-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240916171017.1841767-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-10-21hw/pci-bridge: Add a Kconfig switch for the normal PCI bridgeThomas Huth
The pci-bridge device is not usable on s390x, so introduce a Kconfig switch that allows to disable it. Message-ID: <20240913144844.427899-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-09-13hw: Use device_class_set_legacy_reset() instead of opencodingPeter Maydell
Use device_class_set_legacy_reset() instead of opencoding an assignment to DeviceClass::reset. This change was produced with: spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/device-reset.cocci \ --keep-comments --smpl-spacing --in-place --dir hw Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
2024-09-10qapi/machine: Drop temporary 'prefix'Markus Armbruster
Recent commit "qapi: Smarter camel_to_upper() to reduce need for 'prefix'" added a temporary 'prefix' to delay changing the generated code. Revert it. This improves HmatLBDataType's generated enumeration constant prefix from HMATLB_DATA_TYPE to HMAT_LB_DATA_TYPE, and HmatLBMemoryHierarchy's from HMATLB_MEMORY_HIERARCHY to HMAT_LB_MEMORY_HIERARCHY. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240904111836.3273842-8-armbru@redhat.com>
2024-04-25Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into stagingRichard Henderson
Misc HW patch queue - Script to compare machines compat_props[] (Maksim) - Introduce 'module' CPU topology level (Zhao) - Various cleanups (Thomas, Zhao, Inès, Bernhard) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t # wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B # uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn # zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA # MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i # Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/ # aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp # l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2 # zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp # gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY # SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95 # 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0= # =tm+U # -----END PGP SIGNATURE----- # gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits) hw/core: Support module-id in numa configuration hw/core: Introduce module-id as the topology subindex hw/core/machine: Support modules in -smp hw/core/machine: Introduce the module as a CPU topology level hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init() hw/misc : Correct 5 spaces indents in stm32l4x5_exti hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h' hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device hw: Fix problem with the A*MPCORE switches in the Kconfig files hw/riscv/virt: Replace sprintf by g_strdup_printf hw/misc/imx: Replace sprintf() by snprintf() hw/misc/applesmc: Simplify DeviceReset handler target/i386: Move APIC related code to cpu-apic.c hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h scripts: add script to compare compatibility properties python/qemu/machine: add method to retrieve QEMUMachine::binary field ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-25hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return booleanZhao Liu
As error.h suggested, the best practice for callee is to return something to indicate success / failure. With returned boolean, there's no need to dereference @errp to check failure case. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-ID: <20240418100433.1085447-4-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-04-25hw, target: Add ResetType argument to hold and exit phase methodsPeter Maydell
We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
2024-03-13Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes more memslots support in libvhost-user support PCIe Gen5/Gen6 link speeds in pcie more traces in vdpa network simulation devices support in vdpa SMBIOS type 9 descriptor implementation Bump max_cpus to 4096 vcpus in q35 aw-bits and granule options in VIRTIO-IOMMU Support report NUMA nodes for device memory using GI in acpi Beginning of shutdown event support in pvpanic fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/ # 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt # +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ # uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr # 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G # 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg= # =C0UU # -----END PGP SIGNATURE----- # gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits) docs/specs/pvpanic: document shutdown event hw/cxl: Fix missing reserved data in CXL Device DVSEC hmat acpi: Fix out of bounds access due to missing use of indirection hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory. qemu-options.hx: Document the virtio-iommu-pci aw-bits option hw/arm/virt: Set virtio-iommu aw-bits default value to 48 hw/i386/q35: Set virtio-iommu aw-bits default value to 39 virtio-iommu: Add an option to define the input range width virtio-iommu: Trace domain range limits as unsigned int qemu-options.hx: Document the virtio-iommu-pci granule option virtio-iommu: Change the default granule to the host page size virtio-iommu: Add a granule property hw/i386/acpi-build: Add support for SRAT Generic Initiator structures hw/acpi: Implement the SRAT GI affinity structure qom: new object to associate device to NUMA node hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it hw/i386/pc: Set "normal" boot device order in pc_basic_device_init() hw/i386/pc: Avoid one use of the current_machine global hw/i386/pc: Remove "rtc_state" link again Revert "hw/i386/pc: Confine system flash handling to pc_sysfw" ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/core/machine.c
2024-03-12hw/pci-bridge/cxl_upstream: Fix missing ERRP_GUARD() in cxl_usp_realize()Zhao Liu
As the comment in qapi/error, dereferencing @errp requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: * - It must not be dereferenced, because it may be null. ... * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. * * Using it when it's not needed is safe, but please avoid cluttering * the source with useless code. But in cxl_usp_realize(), @errp is dereferenced without ERRP_GUARD(): cxl_doe_cdat_init(cxl_cstate, errp); if (*errp) { goto err_cap; } Here we check *errp, because cxl_doe_cdat_init() returns void. And since cxl_usp_realize() - as a PCIDeviceClass.realize() method - doesn't get the NULL @errp parameter, it hasn't triggered the bug that dereferencing the NULL @errp. To follow the requirement of @errp, add missing ERRP_GUARD() in cxl_usp_realize(). Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20240223085653.1255438-6-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-03-12hw/pci-bridge/pxb-cxl: Drop RAS capability from host bridge.Jonathan Cameron
This CXL component isn't allowed to have a RAS capability. Whilst this should be harmless as software is not expected to look here, good to clean it up. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240215155206.2736-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12bulk: Access existing variables initialized to &S->F when availablePhilippe Mathieu-Daudé
When a variable is initialized to &struct->field, use it in place. Rationale: while this makes the code more concise, this also helps static analyzers. Mechanical change using the following Coccinelle spatch script: @@ type S, F; identifier s, m, v; @@ S *s; ... F *v = &s->m; <+... - &s->m + v ...+> Inspired-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240129164514.73104-2-philmd@linaro.org> Acked-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> [thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()] Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-12hw/pci-bridge/cxl_upstream: Fix missing ERRP_GUARD() in cxl_usp_realize()Zhao Liu
As the comment in qapi/error, dereferencing @errp requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: * - It must not be dereferenced, because it may be null. ... * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. * * Using it when it's not needed is safe, but please avoid cluttering * the source with useless code. But in cxl_usp_realize(), @errp is dereferenced without ERRP_GUARD(): cxl_doe_cdat_init(cxl_cstate, errp); if (*errp) { goto err_cap; } Here we check *errp, because cxl_doe_cdat_init() returns void. And since cxl_usp_realize() - as a PCIDeviceClass.realize() method - doesn't get the NULL @errp parameter, it hasn't triggered the bug that dereferencing the NULL @errp. To follow the requirement of @errp, add missing ERRP_GUARD() in cxl_usp_realize(). Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240223085653.1255438-6-zhao1.liu@linux.intel.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-09hw/pci-bridge/cxl_upstream: Fix problem with g_steal_pointer()Thomas Huth
When setting GLIB_VERSION_MAX_ALLOWED to GLIB_VERSION_2_58 or higher, glib adds type safety checks to the g_steal_pointer() macro. This triggers errors in the build_cdat_table() function which uses the g_steal_pointer() for type-casting from one pointer type to the other (which also looks quite weird since the local pointers have all been declared with g_autofree though they are never freed here). Let's fix it by using a proper typecast instead. For making this possible, we have to remove the QEMU_PACKED attribute from some structs since GCC otherwise complains that the source and destination pointer might have different alignment restrictions. Removing the QEMU_PACKED should be fine here since the structs are already naturally aligned. Anyway, add some QEMU_BUILD_BUG_ON() statements to make sure that we've got the right sizes (without padding in the structs). Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-14hw/cxl: Standardize all references on CXL r3.1 and minor updatesJonathan Cameron
Previously not all references mentioned any spec version at all. Given r3.1 is the current specification available for evaluation at www.computeexpresslink.org update references to refer to that. Hopefully this won't become a never ending job. A few structure definitions have been updated to add new fields. Defaults of 0 and read only are valid choices for these new DVSEC registers so go with that for now. There are additional error codes and some of the 'questions' in the comments are resolved now. Update documentation reference to point to the CXL r3.1 specification with naming closer to what is on the cover. For cases where there are structure version numbers, add defines so they can be found next to the register definitions. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240126121636.24611-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/pci-bridge/cxl_upstream: Drop g_malloc() failure handlingJonathan Cameron
As a failure of g_malloc() will result in QEMU exiting, it won't return a NULL to check. As such, drop the incorrect handling of such NULL returns in the cdat table building code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20240126120132.24248-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-01-04Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* configure: use a native non-cross compiler for linux-user * meson: cleanups * target/i386: miscellaneous cleanups and optimizations * target/i386: implement CMPccXADD * target/i386: the sgx_epc_get_section stub is reachable * esp: check for NULL result from scsi_device_find() # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWRImYUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNd7AgAgcyJGiMfUkXqhefplpm06RDXQIa8 # FuoJqPb21lO75DQKfaFRAc4xGLagjJROMJGHMm9HvMu2VlwvOydkQlfFRspENxQ/ # 5XzGdb/X0A7HA/mwUfnMB1AZx0Vs32VI5IBSc6acc9fmgeZ84XQEoM3KBQHUik7X # mSkE4eltR9gJ+4IaGo4voZtK+YoVD8nEcuqmnKihSPWizev0FsZ49aNMtaYa9qC/ # Xs3kiQd/zPibHDHJu0ulFsNZgxtUcvlLHTCf8gO4dHWxCFLXGubMush83McpRtNB # Qoh6cTLH+PBXfrxMR3zmTZMNvo8Euls3s07Y8TkNP4vdIIE/kMeMDW1wJw== # =mq30 # -----END PGP SIGNATURE----- # gpg: Signature made Sun 31 Dec 2023 08:12:22 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits) meson.build: report graphics backends separately configure, meson: rename targetos to host_os meson: rename config_all meson: remove CONFIG_ALL meson: remove config_targetos meson: remove CONFIG_POSIX and CONFIG_WIN32 from config_targetos meson: remove OS definitions from config_targetos meson: always probe u2f and canokey if the option is enabled meson: move subdirs to "Collect sources" section meson: move config-host.h definitions together meson: move CFI detection code with other compiler flags meson: keep subprojects together meson: move accelerator dependency checks together meson: move option validation together meson: move program checks together meson: add more sections to main meson.build configure: unify again the case arms in probe_target_compiler configure: remove unnecessary subshell Makefile: clean qemu-iotests output meson: use version_compare() to compare version ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-12-31meson: remove CONFIG_ALLPaolo Bonzini
CONFIG_ALL is tricky to use and was ported over to Meson from the recursive processing of Makefile variables. Meson sourcesets however have all_sources() and all_dependencies() methods that remove the need for it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-30hw/pci-bridge: Constify VMStateRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-46-richard.henderson@linaro.org>
2023-11-07hw/pci-bridge/cxl_downstream: Set default link width and link speedJonathan Cameron
Without these being set the PCIE Link Capabilities register has invalid values in these two fields. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-10-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add Physical Switch Identify command.Jonathan Cameron
Enable it for the switch CCI. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/pci-bridge/cxl_upstream: Move defintion of device to header.Jonathan Cameron
To avoid repetition of switch upstream port specific data in the CXLDeviceState structure it will be necessary to access the switch USP specific data from mailbox callbacks. Hence move it to cxl_device.h so it is no longer an opaque structure. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023160806.13206-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: CXLDVSECPortExtensions renamed to CXLDVSECPortExtJonathan Cameron
Done to reduce line lengths where this is used. Ext seems sufficiently obvious that it need not be spelt out fully. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023140210.3089-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-04hw/pci-bridge/cxl-upstream: Add serial number extended capability supportJonathan Cameron
Will be needed so there is a defined serial number for information queries via the Switch CCI. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230913133615.29876-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-09-21hw/pci-bridge/cxl_upstream: Fix bandwidth entry base unit for SSLBISDave Jiang
According to ACPI spec 6.5 5.2.28.4 System Locality Latency and Bandwidth Information Structure, if the "Entry Base Unit" is 1024 for BW and the matrix entry has the value of 100, the BW is 100 GB/s. So the entry_base_unit should be changed from 1000 to 1024 given the comment notes it's 16GB/s for .latency_bandwidth. Fixes: 882877fc359d ("hw/pci-bridge/cxl-upstream: Add a CDAT table access DOE") Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-09-20hw/pci: spelling fixesMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2023-08-03hw/pci-bridge/cxl_upstream.c: Use g_new0() in build_cdat_table()Peter Maydell
In build_cdat_table() we do: *cdat_table = g_malloc0(sizeof(*cdat_table) * CXL_USP_CDAT_NUM_ENTRIES); This is wrong because: - cdat_table has type CDATSubHeader *** - so *cdat_table has type CDATSubHeader ** - so the array we're allocating here should be items of type CDATSubHeader * - but we pass sizeof(*cdat_table), which is sizeof(CDATSubHeader **), implying that we're allocating an array of CDATSubHeader ** It happens that sizeof(CDATSubHeader **) == sizeof(CDATSubHeader *) so nothing blows up, but this should be sizeof(**cdat_table). Avoid this excessively hard-to-understand code by using g_new0() instead, which will do the type checking for us. While we're here, we can drop the useless check against failure, as g_malloc0() and g_new0() never fail. This fixes Coverity issue CID 1508120. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230718101327.1111374-1-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-19hw/pci-bridge: make building pcie-to-pci bridge configurableSebastian Ott
Introduce a CONFIG option to build the pcie-to-pci bridge. No functional change since it's enabled per default for PCIE_PORT=y. Signed-off-by: Sebastian Ott <sebott@redhat.com> Message-Id: <72b6599d-6b27-00b5-aac5-2ebc16a2e023@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: cdat: Fix failure to free buffer in erorr pathsJonathan Cameron
The failure paths in CDAT file loading did not clear up properly. Change to using g_auto_free and a local pointer for the buffer to ensure this function has no side effects on error. Also drop some unnecessary checks that can not fail. Cleanup properly after a failure to load a CDAT file. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421132020.7408-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-24hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEVJonathan Cameron
Previously, PXB_CXL_DEVICE, PXB_PCIE_DEVICE and PXB_DEVICE all have PCI_DEVICE as their direct parent but share a common state struct PXBDev. convert_to_pxb() is used to get the PXBDev instance from which ever of these types it is called on. This patch switches to an explicit hierarchy based on shared functionality. To allow use of OBJECT_DECLARE_SIMPLE_TYPE() whilst minimizing code changes, all types are renamed to have the postfix _DEV rather than _DEVICE. The new heirarchy has PXB_CXL_DEV with parent PXB_PCIE_DEV which in turn has parent PXB_DEV which continues to have parent PCI_DEVICE. This allows simple use of PXB_DEV() etc rather than a custom function + removal of duplicated properties and moving the CXL specific elements out of struct PXBDev. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-3-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-24hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()Jonathan Cameron
Reproduce issue with configure --enable-qom-cast-debug ... qemu-system-x86_64 -display none -machine q35,cxl=on -device pxb-cxl,bus=pcie.0 hw/pci-bridge/pci_expander_bridge.c:54:PXB_DEV: Object 0x5570e0b1ada0 is not an instance of type pxb Aborted The type conversion results in the right state structure, but PXB_DEV is not a parent of PXB_CXL_DEV hence the error. Rather than directly cleaning up the inheritance, this is the minimal fix which will be followed by the cleanup. Fixes: 154070eaf6 ("hw/pxb-cxl: Support passthrough HDM Decoders unless overridden") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-2-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pxb-cxl: Support passthrough HDM Decoders unless overriddenJonathan Cameron
The CXL r3.0 specification allows for there to be no HDM decoders on CXL Host Bridges if they have only a single root port. Instead, all accesses directed to the host bridge (as specified in CXL Fixed Memory Windows) are assumed to be routed to the single root port. Linux currently assumes this implementation choice. So to simplify testing, make QEMU emulation also default to no HDM decoders under these particular circumstances, but provide a hdm_for_passthrough boolean option to have HDM decoders as previously. Technically this is breaking backwards compatibility, but given the only known software stack used with the QEMU emulation is the Linux kernel and this configuration did not work before this change, there are unlikely to be any complaints that it now works. The option is retained to allow testing of software that does allow for these HDM decoders to exist, once someone writes it. Reported-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- v2: Pick up and fix typo in tag from Fan Ni Message-Id: <20230227153128.8164-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up MSIJonathan Cameron
Done to avoid fixing ACPI route description of traditional PCI interrupts on q35 and because we should probably move with the times anyway. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up AERJonathan Cameron
We are missing necessary config write handling for AER emulation in the CXL root port. Add it based on pcie_root_port.c Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-02hw/pci-bridge/cxl_downstream: Fix type naming mismatchJonathan Cameron
Fix capitalization difference between struct name and typedef. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-27hw: Move ich9.h to southbridge/Bernhard Beschow
ICH9 is a south bridge which doesn't necessarily depend on x86, so move it into the southbridge folder, analoguous to PIIX. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213173033.98762-13-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-28pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-capIgor Mammedov
When ACPI PCI hotplug for Q35 was introduced (6.1), it was implemented by hiding HPC capability on PCIE slot. That however led to a number of regressions and to fix it, it was decided to keep HPC cap exposed in ACPI PCI hotplug case and force guest in ACPI PCI hotplug mode by other means [1]. That reduced meaning of x-native-hotplug to a compat knob [2] for broken 6.1 machine type. Rename property to match its current purpose. 1) 211afe5c69 (hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC) 2) c318bef762 (hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230112140312.3096331-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-28pci_bridge: remove whitespaceIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230112140312.3096331-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-08include/hw/cxl: Move typedef PXBDev to cxl.h, and put it to useMarkus Armbruster
hw/cxl/cxl.h uses the PXBDev structure tag instead of the typedef name. The typedef name is defined in hw/pci/pci_bridge.h. Its inclusion was dropped in the previous commit to break an inclusion loop. Move the typedef to hw/cxl/cxl.h, and use it there. Delete an extra typedef in hw/pci-bridge/pci_expander_bridge.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-3-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/pci: Break inclusion loop pci_bridge.h and cxl.hMarkus Armbruster
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other. Fortunately, breaking the loop is merely a matter of deleting unnecessary includes from headers, and adding them back in places where they are now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-2-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21pci: drop redundant PCIDeviceClass::is_bridge fieldIgor Mammedov
and use cast to TYPE_PCI_BRIDGE instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221129101341.185621-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2022-12-21remove DEC 21154 PCI bridgeIgor Mammedov
Code has not been used practically since its inception (2004) f2aa58c6f4a20 UniNorth PCI bridge support or maybe even earlier, but it was consuming contributors time as QEMU was being rewritten. Drop it for now. Whomever would like to actually use the thing, can make sure it actually works/reintroduce it back when there is a user. PS: I've stumbled upon this when replacing PCIDeviceClass::is_bridge field with QOM cast to PCI_BRIDGE type. Unused DEC 21154 was the only one trying to use the field with plain PCIDevice. It's not worth keeping the field around for the sake of the code that was commented out 'forever'. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221129101341.185621-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-16pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase resetPeter Maydell
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to 3-phase reset, so they don't need to use the deprecated device_class_set_parent_reset() function any more. We have to do both in the same commit, because they keep the parent_reset field in their common parent class's class struct. Note that pnv_phb_root_port_class_init() was pointlessly setting dc->reset twice, once by calling device_class_set_parent_reset() and once directly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221125115240.3005559-5-peter.maydell@linaro.org
2022-12-16pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase resetPeter Maydell
Convert the TYPE_PCIE_ROOT_PORT device to 3-phase reset; this is a necessary precursor to converting any of its child classes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221125115240.3005559-4-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 01:25:05 +0000