aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-bridge
AgeCommit message (Collapse)Author
2023-08-03hw/pci-bridge/cxl_upstream.c: Use g_new0() in build_cdat_table()Peter Maydell
In build_cdat_table() we do: *cdat_table = g_malloc0(sizeof(*cdat_table) * CXL_USP_CDAT_NUM_ENTRIES); This is wrong because: - cdat_table has type CDATSubHeader *** - so *cdat_table has type CDATSubHeader ** - so the array we're allocating here should be items of type CDATSubHeader * - but we pass sizeof(*cdat_table), which is sizeof(CDATSubHeader **), implying that we're allocating an array of CDATSubHeader ** It happens that sizeof(CDATSubHeader **) == sizeof(CDATSubHeader *) so nothing blows up, but this should be sizeof(**cdat_table). Avoid this excessively hard-to-understand code by using g_new0() instead, which will do the type checking for us. While we're here, we can drop the useless check against failure, as g_malloc0() and g_new0() never fail. This fixes Coverity issue CID 1508120. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230718101327.1111374-1-peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-06-20meson: Replace softmmu_ss -> system_ssPhilippe Mathieu-Daudé
We use the user_ss[] array to hold the user emulation sources, and the softmmu_ss[] array to hold the system emulation ones. Hold the latter in the 'system_ss[]' array for parity with user emulation. Mechanical change doing: $ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230613133347.82210-10-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-05-19hw/pci-bridge: make building pcie-to-pci bridge configurableSebastian Ott
Introduce a CONFIG option to build the pcie-to-pci bridge. No functional change since it's enabled per default for PCIE_PORT=y. Signed-off-by: Sebastian Ott <sebott@redhat.com> Message-Id: <72b6599d-6b27-00b5-aac5-2ebc16a2e023@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: cdat: Fix failure to free buffer in erorr pathsJonathan Cameron
The failure paths in CDAT file loading did not clear up properly. Change to using g_auto_free and a local pointer for the buffer to ensure this function has no side effects on error. Also drop some unnecessary checks that can not fail. Cleanup properly after a failure to load a CDAT file. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421132020.7408-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-24hw/pci-bridge: Make PCIe and CXL PXB Devices inherit from TYPE_PXB_DEVJonathan Cameron
Previously, PXB_CXL_DEVICE, PXB_PCIE_DEVICE and PXB_DEVICE all have PCI_DEVICE as their direct parent but share a common state struct PXBDev. convert_to_pxb() is used to get the PXBDev instance from which ever of these types it is called on. This patch switches to an explicit hierarchy based on shared functionality. To allow use of OBJECT_DECLARE_SIMPLE_TYPE() whilst minimizing code changes, all types are renamed to have the postfix _DEV rather than _DEVICE. The new heirarchy has PXB_CXL_DEV with parent PXB_PCIE_DEV which in turn has parent PXB_DEV which continues to have parent PCI_DEVICE. This allows simple use of PXB_DEV() etc rather than a custom function + removal of duplicated properties and moving the CXL specific elements out of struct PXBDev. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-3-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-24hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()Jonathan Cameron
Reproduce issue with configure --enable-qom-cast-debug ... qemu-system-x86_64 -display none -machine q35,cxl=on -device pxb-cxl,bus=pcie.0 hw/pci-bridge/pci_expander_bridge.c:54:PXB_DEV: Object 0x5570e0b1ada0 is not an instance of type pxb Aborted The type conversion results in the right state structure, but PXB_DEV is not a parent of PXB_CXL_DEV hence the error. Rather than directly cleaning up the inheritance, this is the minimal fix which will be followed by the cleanup. Fixes: 154070eaf6 ("hw/pxb-cxl: Support passthrough HDM Decoders unless overridden") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-2-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pxb-cxl: Support passthrough HDM Decoders unless overriddenJonathan Cameron
The CXL r3.0 specification allows for there to be no HDM decoders on CXL Host Bridges if they have only a single root port. Instead, all accesses directed to the host bridge (as specified in CXL Fixed Memory Windows) are assumed to be routed to the single root port. Linux currently assumes this implementation choice. So to simplify testing, make QEMU emulation also default to no HDM decoders under these particular circumstances, but provide a hdm_for_passthrough boolean option to have HDM decoders as previously. Technically this is breaking backwards compatibility, but given the only known software stack used with the QEMU emulation is the Linux kernel and this configuration did not work before this change, there are unlikely to be any complaints that it now works. The option is retained to allow testing of software that does allow for these HDM decoders to exist, once someone writes it. Reported-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- v2: Pick up and fix typo in tag from Fan Ni Message-Id: <20230227153128.8164-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up MSIJonathan Cameron
Done to avoid fixing ACPI route description of traditional PCI interrupts on q35 and because we should probably move with the times anyway. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-07hw/pci-bridge/cxl_root_port: Wire up AERJonathan Cameron
We are missing necessary config write handling for AER emulation in the CXL root port. Add it based on pcie_root_port.c Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Message-Id: <20230302133709.30373-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Fan Ni <fan.ni@samsung.com>
2023-03-02hw/pci-bridge/cxl_downstream: Fix type naming mismatchJonathan Cameron
Fix capitalization difference between struct name and typedef. Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-27hw: Move ich9.h to southbridge/Bernhard Beschow
ICH9 is a south bridge which doesn't necessarily depend on x86, so move it into the southbridge folder, analoguous to PIIX. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213173033.98762-13-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-28pci: acpi hotplug: rename x-native-hotplug to x-do-not-expose-native-hotplug-capIgor Mammedov
When ACPI PCI hotplug for Q35 was introduced (6.1), it was implemented by hiding HPC capability on PCIE slot. That however led to a number of regressions and to fix it, it was decided to keep HPC cap exposed in ACPI PCI hotplug case and force guest in ACPI PCI hotplug mode by other means [1]. That reduced meaning of x-native-hotplug to a compat knob [2] for broken 6.1 machine type. Rename property to match its current purpose. 1) 211afe5c69 (hw/i386/acpi-build: Deny control on PCIe Native Hot-plug in _OSC) 2) c318bef762 (hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine type) Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230112140312.3096331-10-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-28pci_bridge: remove whitespaceIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230112140312.3096331-8-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-08include/hw/cxl: Move typedef PXBDev to cxl.h, and put it to useMarkus Armbruster
hw/cxl/cxl.h uses the PXBDev structure tag instead of the typedef name. The typedef name is defined in hw/pci/pci_bridge.h. Its inclusion was dropped in the previous commit to break an inclusion loop. Move the typedef to hw/cxl/cxl.h, and use it there. Delete an extra typedef in hw/pci-bridge/pci_expander_bridge.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-3-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-08include/hw/pci: Break inclusion loop pci_bridge.h and cxl.hMarkus Armbruster
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other. Fortunately, breaking the loop is merely a matter of deleting unnecessary includes from headers, and adding them back in places where they are now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20221222100330.380143-2-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-21pci: drop redundant PCIDeviceClass::is_bridge fieldIgor Mammedov
and use cast to TYPE_PCI_BRIDGE instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221129101341.185621-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org>
2022-12-21remove DEC 21154 PCI bridgeIgor Mammedov
Code has not been used practically since its inception (2004) f2aa58c6f4a20 UniNorth PCI bridge support or maybe even earlier, but it was consuming contributors time as QEMU was being rewritten. Drop it for now. Whomever would like to actually use the thing, can make sure it actually works/reintroduce it back when there is a user. PS: I've stumbled upon this when replacing PCIDeviceClass::is_bridge field with QOM cast to PCI_BRIDGE type. Unused DEC 21154 was the only one trying to use the field with plain PCIDevice. It's not worth keeping the field around for the sake of the code that was commented out 'forever'. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221129101341.185621-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-16pci: Convert child classes of TYPE_PCIE_ROOT_PORT to 3-phase resetPeter Maydell
Convert the TYPE_CXL_ROOT_PORT and TYPE_PNV_PHB_ROOT_PORT classes to 3-phase reset, so they don't need to use the deprecated device_class_set_parent_reset() function any more. We have to do both in the same commit, because they keep the parent_reset field in their common parent class's class struct. Note that pnv_phb_root_port_class_init() was pointlessly setting dc->reset twice, once by calling device_class_set_parent_reset() and once directly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221125115240.3005559-5-peter.maydell@linaro.org
2022-12-16pci: Convert TYPE_PCIE_ROOT_PORT to 3-phase resetPeter Maydell
Convert the TYPE_PCIE_ROOT_PORT device to 3-phase reset; this is a necessary precursor to converting any of its child classes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221125115240.3005559-4-peter.maydell@linaro.org
2022-11-07hw/pci-bridge/cxl-upstream: Add a CDAT table access DOEJonathan Cameron
This Data Object Exchange Mailbox allows software to query the latency and bandwidth between ports on the switch. For now only provide information on routes between the upstream port and each downstream port (not p2p). Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -- Changes since v8: Mostly to match the type 3 equivalent - Move enum out of function and give it a more descriptive namespace. Message-Id: <20221014151045.24781-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-16pci-bridge/cxl_downstream: Add a CXL switch downstream portJonathan Cameron
Emulation of a simple CXL Switch downstream port. The Device ID has been allocated for this use. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220616145126.8002-3-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-16pci-bridge/cxl_upstream: Add a CXL switch upstream portJonathan Cameron
An initial simple upstream port emulation to allow the creation of CXL switches. The Device ID has been allocated for this use. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220616145126.8002-2-Jonathan.Cameron@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.Jonathan Cameron
As the CXLState will no long be accessible via MachineState at time of PXB_CXL realization, come back later from the machine specific code to fill in the missing memory region setup. Only at this stage is it possible to check if cxl=on, so that check is moved to this later point. Note that for multiple host bridges, the allocation order of the register spaces is changed. This will be reflected in ACPI CEDT. Stubs are added to handle case of CONFIG_PXB=n for machines that call these functions. The bus walking logic is common to all machines so add a utility function + stub to cxl-host*. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-6-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09hw/cxl: Make the CXL fixed memory window setup a machine parameter.Jonathan Cameron
Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC. Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change. The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties. Update qemu-options.hx to reflect that this is now a -machine parameter. The bulk of -M / -machine parameters are documented under machine, so use that in preference to M. Update cxl-test and bios-tables-test to reflect new parameters. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13CXL/cxl_component: Add cxl_get_hb_cstate()Jonathan Cameron
Accessor to get hold of the cxl state for a CXL host bridge without exposing the internals of the implementation. Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-32-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13acpi/cxl: Create the CEDT (9.14.1)Ben Widawsky
The CXL Early Discovery Table is defined in the CXL 2.0 specification as a way for the OS to get CXL specific information from the system firmware. CXL 2.0 specification adds an _HID, ACPI0016, for CXL capable host bridges, with a _CID of PNP0A08 (PCIe host bridge). CXL aware software is able to use this initiate the proper _OSC method, and get the _UID which is referenced by the CEDT. Therefore the existence of an ACPI0016 device allows a CXL aware driver perform the necessary actions. For a CXL capable OS, this works. For a CXL unaware OS, this works. CEDT awaremess requires more. The motivation for ACPI0017 is to provide the possibility of having a Linux CXL module that can work on a legacy Linux kernel. Linux core PCI/ACPI which won't be built as a module, will see the _CID of PNP0A08 and bind a driver to it. If we later loaded a driver for ACPI0016, Linux won't be able to bind it to the hardware because it has already bound the PNP0A08 driver. The ACPI0017 device is an opportunity to have an object to bind a driver will be used by a Linux driver to walk the CXL topology and do everything that we would have preferred to do with ACPI0016. There is another motivation for an ACPI0017 device which isn't implemented here. An operating system needs an attach point for a non-volatile region provider that understands cross-hostbridge interleaving. Since QEMU emulation doesn't support interleaving yet, this is more important on the OS side, for now. As of CXL 2.0 spec, only 1 sub structure is defined, the CXL Host Bridge Structure (CHBS) which is primarily useful for telling the OS exactly where the MMIO for the host bridge is. Link: https://lore.kernel.org/linux-cxl/20210115034911.nkgpzc756d6qmjpl@intel.com/T/#t Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-26-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142)Ben Widawsky
CXL host bridges themselves may have MMIO. Since host bridges don't have a BAR they are treated as special for MMIO. This patch includes i386/pc support. Also hook up the device reset now that we have have the MMIO space in which the results are visible. Note that we duplicate the PCI express case for the aml_build but the implementations will diverge when the CXL specific _OSC is introduced. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-24-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/rp: Add a root portBen Widawsky
This adds just enough of a root port implementation to be able to enumerate root ports (creating the required DVSEC entries). What's not here yet is the MMIO nor the ability to write some of the DVSEC entries. This can be added with the qemu commandline by adding a rootport to a specific CXL host bridge. For example: -device cxl-rp,id=rp0,bus="cxl.0",addr=0.0,chassis=4 Like the host bridge patch, the ACPI tables aren't generated at this point and so system software cannot use it. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-17-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/pxb: Allow creation of a CXL PXB (host bridge)Ben Widawsky
This works like adding a typical pxb device, except the name is 'pxb-cxl' instead of 'pxb-pcie'. An example command line would be as follows: -device pxb-cxl,id=cxl.0,bus="pcie.0",bus_nr=1 A CXL PXB is backward compatible with PCIe. What this means in practice is that an operating system that is unaware of CXL should still be able to enumerate this topology as if it were PCIe. One can create multiple CXL PXB host bridges, but a host bridge can only be connected to the main root bus. Host bridges cannot appear elsewhere in the topology. Note that as of this patch, the ACPI tables needed for the host bridge (specifically, an ACPI object in _SB named ACPI0016 and the CEDT) aren't created. So while this patch internally creates it, it cannot be properly used by an operating system or other system software. Also necessary is to add an exception to scripts/device-crash-test similar to that for exiting pxb as both must created on a PCIexpress host bus. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan.Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-15-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/pci/cxl: Create a CXL bus typeBen Widawsky
The easiest way to differentiate a CXL bus, and a PCIE bus is using a flag. A CXL bus, in hardware, is backward compatible with PCIE, and therefore the code tries pretty hard to keep them in sync as much as possible. The other way to implement this would be to try to cast the bus to the correct type. This is less code and useful for debugging via simply looking at the flags. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-13-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/pxb: Use a type for realizing expandersBen Widawsky
This opens up the possibility for more types of expanders (other than PCI and PCIe). We'll need this to create a CXL expander. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-12-Jonathan.Cameron@huawei.com>
2022-03-06pci: expose TYPE_XIO3130_DOWNSTREAM nameIgor Mammedov
Type name will be used in followup patch for cast check in pcihp code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220301151200.3507298-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06pci-bridge/xio3130_downstream: Fix error handlingJonathan Cameron
Wrong goto label, so msi cleanup would not occur if there is an error in the ssvid initialization. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220218102303.7061-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06pci-bridge/xio3130_upstream: Fix error handlingJonathan Cameron
Goto label is incorrect so msi cleanup would not occur if there is an error in the ssvid initialization. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220218102303.7061-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06hw/pci-bridge/pxb: Fix missing swizzleJonathan Cameron
pxb_map_irq_fn() handled the necessary removal of the swizzle applied to the PXB interrupts by the bus to which it was attached but neglected to apply the normal swizzle for PCI root ports on the expander bridge. Result of this was on ARM virt, the PME interrupts for a second RP on a PXB instance were miss-routed to #45 rather than #46. Tested with a selection of different configurations with 1 to 5 RP per PXB instance. Note on my x86 test setup the PME interrupts are not triggered so I haven't been able to test this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20220118174855.19325-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-15qdev: Make DeviceState.id independent of QemuOptsKevin Wolf
DeviceState.id is a pointer to a string that is stored in the QemuOpts object DeviceState.opts and freed together with it. We want to create devices without going through QemuOpts in the future, so make this a separately allocated string. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211008133442.141332-9-kwolf@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-08-03hw/pcie-root-port: Fix hotplug for PCI devices requiring IOMarcel Apfelbaum
Q35 has now ACPI hotplug enabled by default for PCI(e) devices. As opposed to native PCIe hotplug, guests like Fedora 34 will not assign IO range to pcie-root-ports not supporting native hotplug, resulting into a regression. Reproduce by: qemu-bin -M q35 -device pcie-root-port,id=p1 -monitor stdio device_add e1000,bus=p1 In the Guest OS the respective pcie-root-port will have the IO range disabled. Fix it by setting the "reserve-io" hint capability of the pcie-root-ports so the firmware will allocate the IO range instead. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20210802090057.1709775-1-marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pxb: Add a bypass iommu propertyXingang Wang
Add a bypass_iommu property for pci_expander_bridge, the property is used to indicate whether pxb root bus will bypass iommu. By default the bypass_iommu is disabled, and it can be enabled with: qemu -device pxb-pcie,bus_nr=0x10,addr=0x1,bypass_iommu=true Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-3-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-17Kconfig: Compile PXB for ARM_VIRTJiahui Cen
PXB is now supported on ARM, so let's compile for arm_virt machine. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20210114100643.10617-7-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/pci-bridgeMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() manuallyMarkus Armbruster
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 13:23:57 +0000