aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-bridge
AgeCommit message (Collapse)Author
2019-07-01pcie: check that slt ctrl changed before deletingMichael S. Tsirkin
During boot, linux would sometimes overwrites control of a powered off slot before powering it on. Unfortunately QEMU interprets that as a power off request and ejects the device. For example: /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \ -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -monitor stdio disk.qcow2 (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 (qemu)cont Balloon is deleted during guest boot. To fix, save control beforehand and check that power or led state actually change before ejecting. Note: this is more a hack than a solution, ideally we'd find a better way to detect ejects, or move away from ejects completely and instead monitor whether it's safe to delete device due to e.g. its power state. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-29pci: Make is_bridge a boolDavid Gibson
The is_bridge field in PCIDevice acts as a bool, but is declared as an int. Declare it as a bool for clarity, and change everything that writes it to use true/false instead of 0/1 to match. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20pci: Simplify pci_bus_is_root()David Gibson
pci_bus_is_root() currently relies on a method in the PCIBusClass. But it's always known if a PCI bus is a root bus when we create it, so using a dynamic method is overkill. This replaces it with an IS_ROOT bit in a new flags field, which is set on root buses and otherwise clear. As a bonus this removes the special is_root logic from pci_expander_bridge, since it already creates its bus as a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
2019-03-18kconfig: add dependencies on CONFIG_MSI_NONBROKENPaolo Bonzini
For devices that require msi_init/msix_init to succeed, add a dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices from appearing in a binary that cannot instantiate them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12gen_pcie_root_port: Add ACS (Access Control Services) capabilityKnut Omang
Claim ACS support in the generic PCIe root port to allow passthrough of individual functions of a device to different guests (in a nested virt.setting) with VFIO. Without this patch, all functions of a device, such as all VFs of an SR/IOV device, will end up in the same IOMMU group. A similar situation occurs on Windows with Hyper-V. In the single function device case, it also has a small cosmetic benefit in that the root port itself is not grouped with the device. VFIO handles that situation in that binding rules only apply to endpoints, so it does not limit passthrough in those cases. Signed-off-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <319460b483f566dd57487eb3dd340ed4c10aa53c.1550768238.git-series.knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-20pci/shpc: perform unplug via the hotplug handlerDavid Hildenbrand
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridgeDavid Hildenbrand
These functions are essentially the same, we only have to use object_get_typename() for reporting errors. So let's share the implementation of hotplug handler callbacks. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: rename hotplug handler callbacksDavid Hildenbrand
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename shpc_device_hotplug_common() to shpc_device_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Fast PCIe root ports for new machinesAlex Williamson
Change the default speed and width for new machine types to the fastest and widest currently supported. This should be compatible to the PCIe 4.0 spec. Pre-QEMU-4.0 machine types remain at 2.5GT/s, x1 width. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Allow generic PCIe root port to specify link speed and widthAlex Williamson
Allow users to experimentally specify speed and width values for the generic PCIe root port. Defaults remain at 2.5GT/s & x1 for compatiblity with the intent to only support changing defaults via machine types for now. Note for libvirt testing that pcie-root-port controllers are given default names like "pci.7" which don't play well with using the "-set device.$name.$prop=$value" options accessible to us via <qemu:commandline> options. The solution is to add an <alias> to the pcie-root-port <controller>, for example: <controller type='pci' index='7' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='7' port='0x15'/> <alias name='ua-gfx0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/> </controller> The "ua-" here is a mandatory prefix. We can then use: <qemu:commandline> <qemu:arg value='-set'/> <qemu:arg value='device.ua-gfx0.x-speed=8'/> <qemu:arg value='-set'/> <qemu:arg value='device.ua-gfx0.x-width=16'/> </qemu:commandline> or, without an alias, set globals such as: <qemu:commandline> <qemu:arg value='-global'/> <qemu:arg value='pcie-root-port.x-speed=8'/> <qemu:arg value='-global'/> <qemu:arg value='pcie-root-port.x-width=16'/> </qemu:commandline> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Add link speed and width fields to PCIESlotAlex Williamson
Add fields allowing the PCIe link speed and width of a PCIESlot to be configured, with an instance_post_init callback on the root port parent class to set defaults. This allows child classes to set these via properties or via their own instance_init callback, without requiring all implementions to support arbitrary user selected values. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-13pci-bridge/dec: Convert sysbus init function to realize functionMao Zhongyi
Use DeviceClass rather than SysBusDeviceClass in pci_dec_21154_device_class_init(). Cc: david@gibson.dropbear.id.au Cc: mst@redhat.com Cc: marcel.apfelbaum@gmail.com Cc: qemu-ppc@nongnu.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20181130093852.20739-16-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-05hw/pci-bridge/ioh3420: Remove unuseful headerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05hw/pci-bridge/xio3130: Remove unused functionsPhilippe Mathieu-Daudé
Introduced in 48ebf2f90f8 and faf1e708d5b, these functions were never used. Remove them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07hw/pci: add PCI resource reserve capability to legacy PCI bridgeJing Liu
Add hint to firmware (e.g. SeaBIOS) to reserve addtional BUS/IO/MEM/PREF resource for legacy pci-pci bridge. Add the resource reserve capability deleting in pci_bridge_dev_exitfn. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci/bus: let it has higher migration priorityPeter Xu
In the past, we prioritized IOMMU migration so that we have such a priority order: IOMMU > PCI Devices When migrating a guest with both vIOMMU and a pcie-root-port, we'll always migrate vIOMMU first, since pci buses will be seen to have the same priority of general PCI devices. That's problematic. The thing is that PCI bus number information is stored in the root port, and that is needed by vIOMMU during post_load(), e.g., to figure out context entry for a device. If we don't have correct bus numbers for devices, we won't be able to recover device state of the DMAR memory regions, and things will be messed up. So let's boost the PCIe root ports to be even with higher priority: PCIe Root Port > IOMMU > PCI Devices A smoke test shows that this patch fixes bug 1538953. Also, apply this rule to all the PCI bus/bridge devices: ioh3420, xio3130_downstream, xio3130_upstream, pcie_pci_bridge, pci-pci bridge, i82801b11. I noted that we set pcie_pci_bridge_dev_vmstate twice. Clean that up together. CC: Alex Williamson <alex.williamson@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Laurent Vivier <lvivier@redhat.com> Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1538953 Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci-bridge/i82801b11: clear bridge registers on platform resetLaszlo Ersek
The "i82801b11-bridge" device model is a descendant of "base-pci-bridge" (TYPE_PCI_BRIDGE). However, unlike other similar devices, such as - pci-bridge, - pcie-pci-bridge, - PCIE Root Port, - xio3130 switch upstream and downstream ports, - dec-21154-p2p-bridge, - pbm-bridge, - xilinx-pcie-root, "i82801b11-bridge" does not clear the bridge specific registers at platform reset. This is a problem because devices on "i82801b11-bridge" continue to respond to config space cycles after platform reset, when addressed with the bus number that was previously programmed into the secondary bus number register of "i82801b11-bridge". This error breaks OVMF's search for extra (PXB) root buses, for example. The device class reset method for "i82801b11-bridge" is currently NULL; set it directly to pci_bridge_reset(), like the last three bridge models in the above listing do. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: qemu-stable@nongnu.org Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1541839 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-05qdev: use device_class_set_parent_realize/unrealize/reset()Philippe Mathieu-Daudé
changes generated using the following Coccinelle patch: @@ type DeviceParentClass; DeviceParentClass *pc; DeviceClass *dc; identifier parent_fn; identifier child_fn; @@ ( +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->realize; ... -dc->realize = child_fn; | +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->unrealize; ... -dc->unrealize = child_fn; | +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->reset; ... -dc->reset = child_fn; ) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180114020412.26160-4-f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-24simba: rename PBMPCIBridge and QOM types to reflect simba namingMark Cave-Ayland
Here we rename PBMPCIBridge to SimbaPCIBridge and the QOM type from TYPE_PBM_PCI_BRIDGE to TYPE_SIMBA_PCI_BRIDGE in improve the clarity of the device name. Also touch up the relevant spots in apb.c and various other function names as appropriate. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-24apb: split simba PCI bridge into hw/pci-bridge/simba.cMark Cave-Ayland
Move the QOM type and macros into a new include/hw/pci-bridge/simba.h file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled for sparc64-softmmu builds only. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Michael S. Tsirkin <mst@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2018-01-18hw/pci-bridge: fix QEMU crash because of pcie-root-portMarcel Apfelbaum
If we try to use more pcie_root_ports then available slots and an IO hint is passed to the port, QEMU crashes because we try to init the "IO hint" capability even if the device is not created. Fix it by checking for error before adding the capability, so QEMU can fail gracefully. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-18misc: remove old i386 dependencyPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Rename root bus initialization functions for clarityDavid Gibson
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus() are misleadingly named. They're not used for initializing *any* PCI bus, but only for a root PCI bus. Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead created with a direct qbus_create_inplace() (see pci_bridge_initfn()). This patch renames the functions to make it clear they're only used for a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-11-16hw/pcie-pci-bridge: restrict to X86 and ARMMarcel Apfelbaum
The PCIE-PCI bridge is specific to "pure" PCIe systems (on QEMU we have X86 and ARM), it does not make sense to have it in other archs. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Yongbok Kim <yongbok.kim@mips.com>
2017-10-15hw/gen_pcie_root_port: make IO RO 0 on IO disabledMarcel Apfelbaum
IO_LIMIT and IO_BASE registers should not be writable if gen_pcie_root_port's io-reserve property is set to 0. The COMMAND register should have the IO flag read only. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_PCIE_DEVICE to all PCIe devicesEduardo Habkost
Change all devices that set is_express=1 to implement INTERFACE_PCIE_DEVICE. Cc: Keith Busch <keith.busch@intel.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Dmitry Fleytman <dmitry@daynix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: qemu-block@nongnu.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15hw/pci-bridge/pcie_pci_bridge: properly handle MSI unavailability caseAleksandr Bezzubikov
QEMU with the pcie-pci-bridge device crashes if the guest board doesn't support MSI, e.g. 'qemu-system-ppc64 -M prep -device pcie-pci-bridge'. This is caused by wrong pcie-pci-bridge instantiation error handling. This patch fixes this issue by falling back to legacy INTx if MSI is not available. Also set the bridge's 'msi' property default value to 'auto' in order to trigger errors only when user explicitly set msi=on. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Set err to errp directly rather than through error_propagate()Mao Zhongyi
ioh3420_interrupts_init() pass error message to local_err, then propagate it to errp by error_propagate(), which is not necessary. So eliminate it and pass errp directly instead of local_err. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15xio3130_downstream: Report error if pcie_chassis_add_slot() failedEduardo Habkost
On commit f8cd1b02 ("pci: Convert to realize"), no error_set*() call was added for the pcie_chassis_add_slot() error case. pcie_chassis_add_slot() errors get ignored, making QEMU crash later. e.g.: $ qemu-system-x86_64 -device ioh3420 -device xio3130-downstream qemu-system-x86_64: memory.c:2166: memory_region_del_subregion: Assertion `subregion->container == mr' failed. Aborted (core dumped) Fix it by reporting the error using error_setg(). Fixes: f8cd1b0201c41d88bb97dcafb80348a0e88d8805 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root PortAleksandr Bezzubikov
To enable hotplugging of a newly created pcie-pci-bridge, we need to tell firmware (e.g. SeaBIOS) to reserve additional buses or IO/MEM/PREF space for pcie-root-port. Additional bus reservation allows us to hotplug pcie-pci-bridge into this root port. The number of buses and IO/MEM/PREF space to reserve are provided to the device via a corresponding property, and to the firmware via new PCI capability. The properties' default values are -1 to keep default behavior unchanged. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce pcie-pci-bridge deviceAleksandr Bezzubikov
Introduce a new PCIExpress-to-PCI Bridge device, which is a hot-pluggable PCI Express device and supports devices hot-plug with SHPC. This device is intended to replace the DMI-to-PCI Bridge. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Convert shpc_init() to ErrorMao Zhongyi
In order to propagate error message better, convert shpc_init() to Error also convert the pci_bridge_dev_initfn() to realize. Cc: mst@redhat.com Cc: marcel@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Convert to realizeMao Zhongyi
Convert i82801b11, io3130_upstream, io3130_downstream and pcie_root_port devices to realize. Cc: mst@redhat.com Cc: marcel@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Make errp the last parameter of pci_add_capability()Mao Zhongyi
Add Error argument for pci_add_capability() to leverage the errp to pass info on errors. This way is helpful for its callers to make a better error handling when moving to 'realize'. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03hw/pci-bridge/dec: Classify the DEC PCI bridge as bridge deviceThomas Huth
This way the bridge shows up in the correct section of the "-device help" text. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2017-06-08hw/pcie: fix the generic pcie root port to support migrationMarcel Apfelbaum
Add msix state to pcie-root-ports's vmstate in order to support migration. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-18Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi
pci, virtio, vhost: fixes A bunch of fixes that missed the release. Most notably we are reverting shpc back to enabled by default state as guests uses that as an indicator that hotplug is supported (even though it's unused). Unfortunately we can't fix this on the stable branch since that would break migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 May 2017 10:42:06 PM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: exec: abstract address_space_do_translate() pci: deassert intx when pci device unrealize virtio: allow broken device to notify guest Revert "hw/pci: disable pci-bridge's shpc by default" acpi-defs: clean up open brace usage ACPI: don't call acpi_pcihp_device_plug_cb on xen iommu: Don't crash if machine is not PC_MACHINE pc: add 2.10 machine type pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot libvhost-user: fix crash when rings aren't ready hw/virtio: fix vhost user fails to startup when MQ hw/arm/virt: generate 64-bit addressable ACPI objects hw/acpi-defs: replace leading X with x_ in FADT field names Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18Revert "hw/pci: disable pci-bridge's shpc by default"Marcel Apfelbaum
This reverts commit dc0ae767700c156894e36fab89a745a2dc4173de. Disabling the shpc controller has an undesired side effect. The PCI bridge remains with no attached devices at boot time, and the guest operating systems do not allocate any resources for it, leaving the bridge unusable. Note that the behaviour is dictated by the pci bridge specification. Revert the commit and leave the shpc controller even if is not actually used by any architecture. Slot 0 remains unusable at boot time. Keep shpc off for QEMU 2.9 machines. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 07:30:04 +0000