aboutsummaryrefslogtreecommitdiff
path: root/hw/pc.h
AgeCommit message (Collapse)Author
2011-09-25pckbd: Convert to MemoryRegionRichard Henderson
Slightly non-obvious with mips_jazz passing in the region structure to populate. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-23pc: Unbreak ROM mapping for ISA machineJan Kiszka
This is based on the original fix by Hervé Poussineau: pc_memory_init actually takes a memory region for mapping BIOS and extension ROMs. That equals the PCI memory region if PCI is available, but must be system memory in the ISA case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22440fx: fix PAM, PCI holesAvi Kivity
The current implementation of PAM and the PCI holes is broken in several ways: - PCI BARs are not restricted to the PCI hole (a BAR may hide memory) - PCI devices do not respect PAM (if a PCI device maps a region while PAM maps the region to RAM, the request will be honored) This patch fixes things by introducing a pci address space, and using memory region aliases to represent PAM regions, SMRAM, and PCI holes. The memory hierarchy looks something like system_memory | +--- low memory alias (0-0xe0000000) | | | +-- ram@0 | +--- high memory alias (0x100000000-EOM) | | | +-- ram@0xe0000000 | +--- pci hole alias (end of low memory-0x100000000) | | | +-- pci@end-of-low-memory | | +--- pam[n] (0xc0000-0xc3fff etc) (when set to pci, priority 1) | | | +-- pci@0xc4000 etc | +--- smram (0xa0000-0xbffff) (when set to pci/vga, priority 1) | +-- pci@0xa0000 etc ram (simple ram region) pci | +--- BARn | +--- VGA 0xa0000-0xbffff | +--- ROMs Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22vga: drop get_system_memory() from vga devices and derivativesAvi Kivity
Instead, use the bus accessors, or get the address space directly from the board constructor. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08pci: pass I/O address space to new PCI busAvi Kivity
This lets us register BARs in the I/O address space. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pci: pass address space to pci bus when createdAvi Kivity
This is now done sloppily, via get_system_memory(). Eventually callers will be converted to stop using that. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pc: convert pc_memory_init() to memory APIAvi Kivity
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29pc: grab system_memoryAvi Kivity
While eventually this should come from the machine initialization function, take a short cut to avoid converting all machines now. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-19xen: fix interrupt routingStefano Stabellini
Compared to the last version I only added a comment to the code. - remove i440FX-xen and i440fx_write_config_xen we don't need to intercept pci config writes to i440FX anymore; - introduce PIIX3-xen and piix3_write_config_xen we do need to intercept pci config write to the PCI-ISA bridge to update the PCI link routing; - set the number of PIIX3-xen interrupts line to 128; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08piix_pci: Introduces Xen specific call for irq.Anthony PERARD
This patch introduces Xen specific call in piix_pci. The specific part for Xen is in write_config, set_irq and get_pirq. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc, Disable vmport initialisation with Xen.Anthony PERARD
This is because there is not synchronisation of the vcpu register between Xen and QEMU, so vmport can't work properly. This patch introduces no_vmport parameter to pc_basic_device_init. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc_memory_init: Move memory calculation to the caller.Anthony PERARD
This patch moves above_4g_mem_size and below_4g_mem_size calculation in the caller of pc_memory_init (pc_init1). And the prototype of pc_memory_init is changed because there is no need anymore to have variable pointer and the ram_size parameter. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-02-20i8254: convert to qdevBlue Swirl
Convert to qdev. Don't expose PITState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20vga-isa: make optionalBlue Swirl
Ignore failure with vga-isa device creation, but print a warning message. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20vga-isa: convert to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20fdc: refactor device creationBlue Swirl
Turn fdc_init_isa into an inline function. Get floppy geometry directly from the drives. Don't expose FDCtrl. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20serial: make optionalBlue Swirl
Ignore failure with serial device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20serial: refactor device creationBlue Swirl
Turn serial_init into an inline function. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20ne2000_isa: make optionalBlue Swirl
Ignore failure with ne2000_isa device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20ne2000_isa: refactor device creationBlue Swirl
Turn isa_ne2000_init into an inline function. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20parallel: make optionalBlue Swirl
Ignore failure with parallel device creation. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-20parallel: refactor device creationBlue Swirl
Turn parallel_init into an inline function. Don't expose ParallelState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12x86: make vmmouse optionalBlue Swirl
Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be created. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12vmmouse: convert to qdevBlue Swirl
Convert to qdev, also add a proper reset function. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-02-12vmport: convert to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-25audio: consolidate audio_init()Isaku Yamahata
consolidate audio_init() and remove references to shoundhw. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-11-16more stdvga cleanups.Gerd Hoffmann
video.x is gone now. It was the only user of the vga bios_offset + bios_size logic. Zap it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-07-02pc: Fix CMOS info for drives defined with -deviceMarkus Armbruster
Drives defined with -drive if=ide get get created along with the IDE controller, inside machine->init(). That's before cmos_init(). Drives defined with -device get created during generic device init. That's after cmos_init(). Because of that, CMOS has no information on them (type, geometry, translation). Older versions of Windows such as XP reportedly choke on that. Split off the part of CMOS initialization that needs to know about -device devices, and turn it into a reset handler, so it runs after device creation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-19ioapic: convert to qdevBlue Swirl
Convert to qdev. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-28Fix overflow in i440fx_init()Avi Kivity
The ram_size parameter can be larger than an int, so it may be truncated. Fix by using the correct type. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22Compile pckbd only onceBlue Swirl
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pci hotadd, acpi_piix4: remove global variablesIsaku Yamahata
remove global variables, gpe and pci0_status by moving them into PIIX4PMState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15rtc: make rtc_xxx accept/return ISADevice instead of RTCState.Isaku Yamahata
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice instead of RTCState. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: move rtc declarations from pc.h into a dedicated header file.Isaku Yamahata
Move rtc_xxx declarations from pc.h into mc146818rtc.h. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: split out piix specific part from pc.c into pc_piix.cIsaku Yamahata
Finally, we can safely split out the piix specific part from pc.c into pc_piix.c. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc: make pc_init1() not refer ferr_irq directly.Isaku Yamahata
By introducing a registering function, make pc_init1() not refer to ferr_irq directly in order to make ferr_irq piix independent. Later pc_init1() will be split out into another file keeping ferr_irq static. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15pc, i440fx: Make smm enable/disable function i440fx independent.Isaku Yamahata
make cpu_smm_update() generic to be independent on i440fx by registering a callback. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-03hw: better i440 emulationBernhard M. Wiedemann
updated version of an old patch http://xenon.stanford.edu/~eswierk/misc/qemu-linuxbios/qemu-piix-ram-size.patch that together with http://www.mail-archive.com/linuxbios@linuxbios.org/msg02390.html (which is already in coreboot trunk) allows coreboot to autodetect the amount of RAM within qemu/kvm from a register in i440 northbridge. The message on the old patch states: Unfortunately the current version of qemu does not set these registers, but I have patched qemu so that it emulates the i440 more faithfully in this regard. Signed-off-by: Bernhard M. Wiedemann <qemudevbmw@lsmod.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-29Compile acpi only onceBlue Swirl
Use qemu_irqs to trigger CMOS S3 and SMI events. Avoid using kvm.h, which uses CPUState. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Compile serial only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21Move x86 specific PC declarations to a separate fileBlue Swirl
x86 definitions (especially CPUState uses) prevent many files from being compiled within libhw. Move x86 specific declarations (APIC stuff) to a separate file. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-01Move ioport.h out of cpu-all.hPaul Brook
Only include ioport.h where it is actually needed. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-19QEMU e820 reservation patchJes Sorensen
Hi, Kevin and I have agreed on the approach for this one now. So here is the latest version of the patch for QEMU, submitting e820 reservation entries via fw_cfg. Cheers, Jes Use qemu-cfg to provide the BIOS with an optional table of e820 entries. Notify the BIOS of the location of the TSS+EPT range to by reserving it via the e820 table. This matches a corresponding patch for Seabios, however older versions of Seabios will default to the hardcoded address range and stay compatible with current QEMU. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-12serial: Add interface to set reference oscillator frequencyStefan Weil
Many (most?) serial interfaces have a programmable clock which provides the reference frequency ("baudbase"). So a fixed baudbase which is only set once can be wrong. omap1.c is an example which could use the new interface to change baudbase when the programmable clock changes. ar7 system emulation (still not part of standard QEMU) is similar to omap and already uses serial_set_frequency. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27mc146818rtc: remove rtc_mm_init()Juan Quintela
It was used for Acer Pica 61 emulation, removed in 2008 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05serial: convert isa to qdevGerd Hoffmann
Everything using standard isa I/O ports and IRQ windup is considerd being an actual isa device. That are all serial_init() users except mips_mipssim() which seems to have a non-standard IRQ windup. baud rate is fixed at 115200 now as no caller passed in something else. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05pci: windup acpi-based hotplugGerd Hoffmann
Switch over acpi-based PCI hotplug for pc over to the new qdev-based pci hotplugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05parallel: convert isa to qdevGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-07 23:29:23 +0000