aboutsummaryrefslogtreecommitdiff
path: root/hw/omap2.c
AgeCommit message (Collapse)Author
2011-11-28omap_l4: rename omap_l4_attach_region() to omap_l4_attach()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap_dss: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap2: convert to memory API (part II)Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap2: convert to memory API (part I)Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap_dma: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap_sdrc: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap_l4: add memory API variant of omap_l4_attach()Avi Kivity
Also add omap_l4_region_size(), since memory API functions need the size during initialization. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap: eliminate l4_register_io_memoryAvi Kivity
This is a trivial wrapper around cpu_register_io_memory(), adding no value. Inline it into all callers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-28omap_uart: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-21hw/omap2: Wire up the IRQ for the 2430's fifth GPIO modulePeter Maydell
The OMAP2430 version of the omap-gpio device has five GPIO modules, not four like the other OMAP2 versions; wire up the fifth module's IRQ line correctly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-09-23omap_intc: QdevifyPeter Maydell
Convert the omap_intc devices to qdev. This includes adding a 'revision' property which will be needed for omap3. The bulk of this patch is the replacement of "s->irq[x][y]" with "qdev_get_gpio_in(s->ih[x], y)" now that the interrupt controller exposes its input lines as qdev gpio inputs. The devices are named "omap-intc" and "omap2-intc", following the filename and the OMAP2/3 hardware names, although some internal functions are still named "omap_inth_*". Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-09-21soc_dma: drop soc_dma_port_add_mem_ram()Avi Kivity
It's a trivial wrapper for soc_dma_port_add_mem(), which makes the memory API conversion more difficult because it takes a ram addr_t. Drop. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-28omap: Wire up the DMA request line to the GPMCPeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-08-28omap_gpmc: Take omap_mpu_state* in omap_gpmc_initJuha Riihimäki
Take a pointer to the omap mpu state struct in omap_gpmc_init. Some details of GPMC behaviour depend on the OMAP version we are a part of. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2011-08-22char: rename qemu_chr_open() -> qemu_chr_new()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-30hw/omap_gpio.c: Convert to qdevJuha Riihimäki
Convert the OMAP GPIO module to qdev. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> [Riku Voipio: Fixes and restructuring patchset] Signed-off-by: Riku Voipio <riku.voipio@iki.fi> [Peter Maydell: More fixes and cleanups for upstream submission] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-10hw/omap: Fix default setup for OMAP UART devicesStefan Weil
Character devices created by qemu_chr_open don't allow duplicate device names, so naming all UART devices "null" no longer works. Running "qemu-system-arm -M n800" (and some other machines) results in this error message: qemu-system-arm: Duplicate ID 'null' for chardev Can't create serial device, empty char device This is fixed by setting a default label "uart1", "uart2" or "uart3". Cc: Andrzej Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-06-30hw/omap : make local function static and remove declaration from headercmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omwp2.c : separate l4 interconnect modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate tap module(Test-Chip-level)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate spi modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate sdrc (sdram controller)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gpmc(general purpose memory controller)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate synctimer modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gptimer modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gpio modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-27Remove useless device dependency of HAS_AUDIOBlue Swirl
System architecture dictates whether HAS_AUDIO is defined. It's then useless to check for HAS_AUDIO in files which are only used on those architectures which always have audio. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-04blockdev: Collect block device code in new blockdev.cMarkus Armbruster
Anything that moves hundreds of lines out of vl.c can't be all bad. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-04-25arm: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-21Fix Sparse warning about invalid access past the end of 'mode'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-21Fix Sparse warnings about using plain integer as NULL pointerBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14Remove any pretense that there can be more than one AudioStatemalc
2009-05-12Push AUD_init down to devicesPaul Brook
Now we can safely call AUD_init multiple times we can push it down to individual audio devices, rather than having to pass it from the board init. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-10Follow coding conventionsPaul Brook
Remove explicit struct qualifiers and rename structure types. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08Replace cpu_abort with hw_errorPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-01-18add an init function parameter to qemu_chr_open()aurel32
And use it for the malta emulation. Fix segfault introduced in revision 6352. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 03:46:54 +0000