aboutsummaryrefslogtreecommitdiff
path: root/hw/nvram/spapr_nvram.c
AgeCommit message (Collapse)Author
2022-07-12block: Change blk_{pread,pwrite}() param orderAlberto Faria
Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add a 'flags' param to blk_pread()Alberto Faria
For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Make blk_{pread,pwrite}() return 0 on successAlberto Faria
They currently return the value of their 'bytes' parameter on success. Make them return 0 instead, for consistency with other I/O functions and in preparation to implement them using generated_co_wrapper. This also makes it clear that short reads/writes are not possible. Signed-off-by: Alberto Faria <afaria@redhat.com> Message-Id: <20220705161527.1054072-2-afaria@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-03-04block: rename bdrv_invalidate_cache_all, blk_invalidate_cache and ↵Emanuele Giuseppe Esposito
test_sync_op_invalidate_cache Following the bdrv_activate renaming, change also the name of the respective callers. bdrv_invalidate_cache_all -> bdrv_activate_all blk_invalidate_cache -> blk_activate test_sync_op_invalidate_cache -> test_sync_op_activate No functional change intended. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220209105452.1694545-5-eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-14nvram: Exit QEMU if NVRAM cannot contain all -prom-env dataGreg Kurz
Since commit 61f20b9dc5b7 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter"), pseries machines can pre-initialize the "system" partition in the NVRAM with the data passed to all -prom-env parameters on the QEMU command line. In this case it is assumed that all the data fits in 64 KiB, but the user can easily pass more and crash QEMU: $ qemu-system-ppc64 -M pseries $(for ((x=0;x<128;x++)); do \ echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \ done) # this requires ~128 Kib malloc(): corrupted top size Aborted (core dumped) This happens because we don't check if all the prom-env data fits in the NVRAM and chrp_nvram_set_var() happily memcpy() it passed the buffer. This crash affects basically all ppc/ppc64 machine types that use -prom-env: - pseries (all versions) - g3beige - mac99 and also sparc/sparc64 machine types: - LX - SPARCClassic - SPARCbook - SS-10 - SS-20 - SS-4 - SS-5 - SS-600MP - Voyager - sun4u - sun4v Add a max_len argument to chrp_nvram_create_system_partition() so that it can check the available size before writing to memory. Since NVRAM is populated at machine init, it seems reasonable to consider this error as fatal. So, instead of reporting an error when we detect that the NVRAM is too small and adapt all machine types to handle it, we simply exit QEMU in all cases. This is still better than crashing. If someone wants another behavior, I guess this can be reworked later. Tested with: $ yes q | \ (for arch in ppc ppc64 sparc sparc64; do \ echo == $arch ==; \ qemu=${arch}-softmmu/qemu-system-$arch; \ for mach in $($qemu -M help | awk '! /^Supported/ { print $1 }'); do \ echo $mach; \ $qemu -M $mach -monitor stdio -nodefaults -nographic \ $(for ((x=0;x<128;x++)); do \ echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \ done) >/dev/null; \ done; echo; \ done) Without the patch, affected machine types cause QEMU to report some memory corruption and crash: malloc(): corrupted top size free(): invalid size *** stack smashing detected ***: terminated With the patch, QEMU prints the following message and exits: NVRAM is too small. Try to pass less data to -prom-env It seems that the conditions for the crash have always existed, but it affects pseries, the machine type I care for, since commit 61f20b9dc5b7 only. Fixes: 61f20b9dc5b7 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter") RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1867739 Reported-by: John Snow <jsnow@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159736033937.350502.12402444542194031035.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-20Let cpu_[physical]_memory() calls pass a boolean 'is_write' argumentPhilippe Mathieu-Daudé
Use an explicit boolean type. This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-12spapr: Use CamelCase properlyDavid Gibson
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-02hw/ppc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-08hw/nvram/spapr_nvram: Device can not be created by the usersThomas Huth
Trying to add a spapr-nvram device currently aborts QEMU like this: $ ppc64-softmmu/qemu-system-ppc64 -device spapr-nvram qemu-system-ppc64: hw/ppc/spapr_rtas.c:407: spapr_rtas_register: Assertion `!rtas_table[token].name' failed. Aborted (core dumped) This NVRAM device registers RTAS calls during its realize function and thus can only be used once - and that's internally from spapr.c. So let's mark the device with user_creatable = false to avoid that the users can crash their QEMU this way. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-06spapr_nvram: Check return value from blk_getlength()Peter Maydell
The blk_getlength() function can return an error value if the image size cannot be determined. Check for this rather than ploughing on and trying to g_malloc0() a negative number. (Spotted by Coverity, CID 1288484.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-28hw/block: Request permissionsKevin Wolf
This makes all device emulations with a qdev drive property request permissions on their BlockBackend. The only thing we block at this point is resizing images for some devices that can't support it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-13migration: consolidate VMStateField.startHalil Pasic
The member VMStateField.start is used for two things, partial data migration for VBUFFER data (basically provide migration for a sub-buffer) and for locating next in QTAILQ. The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC is used. This however goes unnoticed because actually partial migration for VBUFFER is not used at all. Let's consolidate the usage of VMStateField.start by removing support for partial migration for VBUFFER. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-10-28spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameterThomas Huth
In case we do not load the NVRAM contents from a file and the user specified the "-prom-env" parameter, use the new CHRP NVRAM helper functions to pre-initialize the NVRAM partitions, so that the SLOF firmware now can pick up the environment variables from the -prom-env parameter, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-25spapr: fix spapr-nvram migrationlvivier@redhat.com
When spapr-nvram is backed by a file using pflash interface, migration fails on the destination guest with assert: bdrv_co_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed. This avoids the problem by delaying the pflash update until after the device loads complete. This fix is similar to the one for the pflash_cfi01 migration: 90c647d Fix pflash migration Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-12block: Allow BDRV_REQ_FUA through blk_pwrite()Eric Blake
We have several block drivers that understand BDRV_REQ_FUA, and emulate it in the block layer for the rest by a full flush. But without a way to actually request BDRV_REQ_FUA during a pass-through blk_pwrite(), FUA-aware block drivers like NBD are forced to repeat the emulation logic of a full flush regardless of whether the backend they are writing to could do it more efficiently. This patch just wires up a flags argument; followup patches will actually make use of it in the NBD driver and in qemu-io. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29ppc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2015-07-07spapr: Merge sPAPREnvironment into sPAPRMachineStateDavid Gibson
The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09spapr_vio: Convert to realize()Markus Armbruster
Bonus fix: always set an error on failure. Some failures were silent before, except for the generic error set by device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-04spapr_nvram: Enable migrationAlexey Kardashevskiy
The only case when sPAPR NVRAM migrates now is if is backed by a file and copy-storage migration is performed. In other cases NVRAM does not migrate regardless whether it is backed by a file or not. This enables shadow copy of NVRAM in RAM which is read from a file (if used) and used for reads. Writes to NVRAM are mirrored to the file. This defines a VMSTATE descriptor for NVRAM device so the memory copy of NVRAM can migrate and be flushed to a backing file on the destination if one is specified. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27spapr: Fix RTAS token numbersAlexey Kardashevskiy
At the moment spapr_rtas_register() allocates a new token number for every new RTAS callback so numbers are not fixed and depend on the number of supported RTAS handlers and the exact order of spapr_rtas_register() calls. These tokens are copied into the device tree and remain the same during the guest lifetime. When we start another guest to receive a migration, it calls spapr_rtas_register() as well. If the number of RTAS handlers or their order is different in QEMU on source and destination sides, the "/rtas" node in the device tree will differ. Since migration overwrites the device tree (as it overwrites the entire RAM), the actual RTAS config on the destination side gets broken. This defines global contant values for every RTAS token which QEMU is using today. This changes spapr_rtas_register() to accept a token number instead of allocating one. This changes all users of spapr_rtas_register(). This changes XICS-KVM not to cache tokens registered with KVM as they constant now. This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as a base. TOKEN_MAX is moved and renamed too and its value is changed to the last token + 1. Boundary checks for token values are adjusted. This reserves token numbers for "os-term" handlers and PCI hotplug which we are working on. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_nvram: Correct max nvram sizeAlexey Kardashevskiy
Currently it is UINT16_MAX*16 = 65536*16 = 1048560 which is not a round number and therefore a bit confusing. This defines MAX_NVRAM_SIZE precisely as 1MB. Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-20spapr-rtas: replace return code constants with macrosAlexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-11-08spapr: add vio-bus devices to categoriesAlexey Kardashevskiy
In order to get devices appear in output of "./qemu-system-ppc64 -device ?", they must be assigned to one of DEVICE_CATEGORY_XXXX. This puts VIO devices classes to corresponding categories. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-01spapr-rtas: add CPU argument to RTAS callsAnthony Liguori
RTAS is a hypervisor provided binary blob that a guest loads and calls into to execute certain functions. It's similar to the vsyscall page in Linux or the short lived VMCI paravirt interface from VMware. The QEMU implementation of the RTAS blob is simply a passthrough that proxies all RTAS calls to the hypervisor via an hypercall. While we pass a CPU argument for hypercall handling in QEMU, we don't pass it for RTAS calls. Since some RTAs calls require making hypercalls (normally RTAS is implemented as guest code) we have nasty hacks to allow that. Add a CPU argument to RTAS call handling so we can more easily invoke hypercalls just as guest code would. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26pseries: Convert VIO code to QOM style type safe(ish) castsDavid Gibson
Curerntly the pseries VIO device code contains quite a few explicit uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe, and not the conventional way of doing things in the QOM model. This patch converts the code to use the QOM convention of per-type macros to do verified casts with OBJECT_CHECK(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-08hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 06:02:23 +0000