Age | Commit message (Collapse) | Author |
|
nvme_sriov_pre_write_ctrl() used to directly inspect SR-IOV
configurations to know the number of VFs being disabled due to SR-IOV
configuration writes, but the logic was flawed and resulted in
out-of-bound memory access.
It assumed PCI_SRIOV_NUM_VF always has the number of currently enabled
VFs, but it actually doesn't in the following cases:
- PCI_SRIOV_NUM_VF has been set but PCI_SRIOV_CTRL_VFE has never been.
- PCI_SRIOV_NUM_VF was written after PCI_SRIOV_CTRL_VFE was set.
- VFs were only partially enabled because of realization failure.
It is a responsibility of pcie_sriov to interpret SR-IOV configurations
and pcie_sriov does it correctly, so use pcie_sriov_num_vfs(), which it
provides, to get the number of enabled VFs before and after SR-IOV
configuration writes.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2024-26328
Fixes: 11871f53ef8e ("hw/nvme: Add support for the Virtualization Management command")
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240228-reuse-v8-1-282660281e60@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 91bb64a8d2014fda33a81fcf0fce37340f0d3b0c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Commit 1901b4967c3f ("hw/block/nvme: move msix table and pba to BAR 0")
moved the MSI-X table and PBA to BAR 0 to make room for enabling CMR and
PMR at the same time. As reported by Julien Grall in #2184, this breaks
migration through system hibernation.
Add a machine compatibility parameter and set it on machines pre 6.0 to
enable the old behavior automatically, restoring the hibernation
migration support.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2184
Fixes: 1901b4967c3f ("hw/block/nvme: move msix table and pba to BAR 0")
Reported-by: Julien Grall julien@xen.org
Tested-by: Julien Grall julien@xen.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit fa905f65c5549703279f68c253914799b10ada47)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Generalize the mbar size helper such that it can handle cases where the
MSI-X table and PBA are expected to be in an exclusive bar.
Cc: qemu-stable@nongnu.org
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit ee7bda4d38cda3eaf114c850a723dd12e23d3abc)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The number of logical blocks within a source range is converted into a
1s based number at the time of parsing. However, when verifying the copy
length we add one again, causing the check against MCL to fail in error.
Cc: qemu-stable@nongnu.org
Fixes: 381ab99d8587 ("hw/nvme: check maximum copy length (MCL) for COPY")
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 8c78015a55d84c016da6d5e41b6b5f618ecb25ab)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Currently, when a VF is created, it uses the 'params' object of the PF
as it is. In other words, the 'params.serial' string memory area is also
shared. In this situation, if the VF is removed from the system, the
PF's 'params.serial' object is released with object_finalize() followed
by object_property_del_all() which release the memory for 'serial'
property. If that happens, the next VF created will inherit a serial
from a corrupted memory area.
If this happens, an error will occur when comparing subsys->serial and
n->params.serial in the nvme_subsys_register_ctrl() function.
Cc: qemu-stable@nongnu.org
Fixes: 44c2c09488db ("hw/nvme: Add support for SR-IOV")
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
(cherry picked from commit 4f0a4a3d5854824e5c5eccf353d4a1f4f749a29d)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
numcntl is one byte and so is max_vfs. Using cpu_to_le16 on big endian
hosts results in numcntl being set to 0.
Fix by dropping the endian conversion.
Fixes: 99f48ae7ae ("hw/nvme: Add support for Secondary Controller List")
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Message-ID: <20240222-fix-sriov-numcntl-v1-1-d60bea5e72d0@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d2b5bb860e6c17442ad95cc275feb07c1665be5c)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Fix local variable shadowing in nvme_ns_init().
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-ID: <20230925-fix-local-shadowing-v1-1-3a1172132377@samsung.com>
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
trivial patches for 2023-09-21
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmUL/84PHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5Zlz4H/iI7Rhmsw6E46WhQPz1oly8p5I3m6Tcxs5B3
# nagfaJC0EYjKyMZC1bsATJwRj8robCb5SDhZeUfudt1ytZYFfH3ulvlUrGYrMQRW
# YEfBFIDLexqrLpsykc6ovl2NB5BXQsK3n6NNbnYE1OxQt8Cy4kNQi1bStrZ8JzDE
# lIxvWZdwoQJ2K0VRDGRLrL6XG80qeONSXEoppXxJlfhk1Ar3Ruhijn3REzfQybvV
# 1zIa1/h80fSLuwOGSPuOLqVCt6JzTuOOrfYc9F+sjcmIQWHLECy6CwTHEbb921Tw
# 9HD6ah4rvkxoN2NWSPo/kM6tNW/pyOiYwYldx5rfWcQ5mhScuO8=
# =u6P0
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 21 Sep 2023 04:33:18 EDT
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
docs/devel/reset.rst: Correct function names
docs/cxl: Cleanout some more aarch64 examples.
hw/mem/cxl_type3: Add missing copyright and license notice
hw/cxl: Fix out of bound array access
docs/cxl: Change to lowercase as others
hw/cxl/cxl_device: Replace magic number in CXLError definition
hw/pci-bridge/cxl_upstream: Fix bandwidth entry base unit for SSLBIS
hw/cxl: Fix CFMW config memory leak
hw/i386/pc: fix code comment on cumulative flash size
subprojects: Use the correct .git suffix in the repository URLs
hw/other: spelling fixes
hw/tpm: spelling fixes
hw/pci: spelling fixes
hw/net: spelling fixes
i386: spelling fixes
bsd-user: spelling fixes
ppc: spelling fixes
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The synchronous bdrv_aio_cancel() function needs the acb's AioContext so
it can call aio_poll() to wait for cancellation.
It turns out that all users run under the BQL in the main AioContext, so
this callback is not needed.
Remove the callback, mark bdrv_aio_cancel() GLOBAL_STATE_CODE just like
its blk_aio_cancel() caller, and poll the main loop AioContext.
The purpose of this cleanup is to identify bdrv_aio_cancel() as an API
that does not work with the multi-queue block layer.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
staging
hw/nvme updates
Two fixes for dynamic array allocation.
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmUAc8AACgkQTeGvMW1P
# DelwhQgAxD7imw85V89Dz58LgrFoq5XZz2cq6Q5BsudyZd8FW5r7lOn9c1i0Yu2x
# iiP93FX0b5LPQ9/8/liz3oHu1HZ7+hX+VeDZSQ1/bugfXM/eDSPA7lf7GG1np312
# 9lKRs8o+T4Di7v93kdiEi6G3b0jQSmZ722aMa54isk58hy1mcUTnGxvPZpVZutTP
# lYhwuElQIsnnKXB0jaRlpcDkpXdHJ1wwziaYLM7pus+tElMiSkFP05j2pX9iigKu
# 7g+Hs+DaqrOzdoF/6uu72IKygq3/5H8iou1No/7OICWbFti5Qhhra0OKQE6nrlKd
# 51fnWA6VjpO5g9+diwRRYbjEiOrkqQ==
# =wn4B
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 12 Sep 2023 10:20:48 EDT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu:
hw/nvme: Avoid dynamic stack allocation
hw/nvme: Use #define to avoid variable length array
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Instead of using a variable-length array in nvme_map_prp(),
allocate on the stack with a g_autofree pointer.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
In nvme_map_sgl() we create an array segment[] whose size is the
'const int SEG_CHUNK_SIZE'. Since this is C, rather than C++, a
"const int foo" is not a true constant, it's merely a variable with a
constant value, and so semantically segment[] is a variable-length
array. Switch SEG_CHUNK_SIZE to a #define so that we can make the
segment[] array truly fixed-size, in the sense that it doesn't
trigger the -Wvla warning.
The codebase has very few VLAs, and if we can get rid of them all we
can make the compiler error on new additions. This is a defensive
measure against security bugs where an on-stack dynamic allocation
isn't correctly size-checked (e.g. CVE-2021-3527).
[PMM: rebased (function has moved file), expand commit message
based on discussion from previous version of patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
We recently had issues with nvme devices on big endian platforms.
Include their compilation on s390x to ease tests.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230828150148.120031-1-clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The Reclaim Unit Update operation in I/O Management Receive does not
verify the presence of a configured endurance group prior to accessing
it.
Fix this.
Cc: qemu-stable@nongnu.org
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
nvme_directive_receive() does not check if an endurance group has been
configured (set) prior to testing if flexible data placement is enabled
or not.
Fix this.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1815
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
The nvme CRC64 generator expects the caller to pass inverted seed value.
Pass inverted crc value for metadata buffer.
Cc: qemu-stable@nongnu.org
Fixes: 44219b6029fc ("hw/nvme: 64-bit pi support")
Signed-off-by: Ankit Kumar <ankit.kumar@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
As of prior to this patch, the controller checks the value of CC.IOCQES
and CC.IOSQES prior to enabling the controller. As reported by Ben in
GitLab issue #1691, this is not spec compliant. The controller should
only check these values when queues are created.
This patch moves these checks to nvme_create_cq(). We do not need to
check it in nvme_create_sq() since that will error out if the completion
queue is not already created.
Also, since the controller exclusively supports SQEs of size 64 bytes
and CQEs of size 16 bytes, hard code that.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1691
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
As reported by Trend Micro's Zero Day Initiative, an oob memory read
vulnerability exists in nvme_fdp_events(). The host-provided offset is
not verified.
Fix this.
This is only exploitable when Flexible Data Placement mode (fdp=on) is
enabled.
Fixes: CVE-2023-4135
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reported-by: Trend Micro's Zero Day Initiative
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Use the stl/ldl pci dma api for writing/reading doorbells. This removes
the explicit endian conversions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
In commit 2fda0726e514 ("hw/nvme: fix missing endian conversions for
doorbell buffers"), we fixed shadow doorbells for big-endian guests
running on little endian hosts. But I did not fix little-endian guests
on big-endian hosts. Fix this.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1765
Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Currently the only implementers of ARI is SR-IOV devices, and they
behave similar. Share the ARI next function number.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Allow the placement handles to be specified as ranges, i.e.
`fdp.ruhs=1:3-5` will attempt to assign ruh 1, 3, 4 and 5 to the
namespace.
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Verify that a reclaim unit handle identifier is only specified once in
fdp.ruhs.
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Fix a off-by-one error when verifying the number of reclaim unit handle
identifiers specified in fdp.ruhs. To make the fix nicer, move the
verification of the fdp.nruh parameter to an earlier point.
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Jesper Wendel Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
MCL(Maximum Copy Length) in the Identify Namespace data structure limits
the number of LBAs to be copied inside of the controller. We've not
checked it at all, so added the check with returning the proper error
status.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
If we don't have NVME_CMD_COPY consideration in the switch statement in
nvme_aio_err(), it will go to have NVME_INTERNAL_DEV_ERROR and
`req->status` will be ovewritten to it. During the aio context, it
might set the NVMe status field like NVME_CMD_SIZE_LIMIT, but it's
overwritten in the nvme_aio_err().
Add consideration for the NVME_CMD_COPY not to overwrite the status at
the end of the function.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Add more comments of existing properties for nvme-ns device.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The last argument to -pci_nvme_err_startfail_virt_state is always "OFFLINE"
due to the enclosing "if" condition requiring !sctrl->scs. Reported by
Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The iocb (and the allocated memory to hold LBA ranges) leaks if reading
the LBA ranges fails.
Fix this by adding a free and an unref of the iocb.
Reported-by: Coverity (CID 1508281)
Fixes: d7d1474fd85d ("hw/nvme: reimplement dsm to allow cancellation")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Coverity reports a memory leak of memory when parsing ruhids at
namespace initialization. Since this is just working memory, not needed
beyond the scope of the functions, fix this by adding a g_autofree
annotation.
Reported-by: Coverity (CID 1507979)
Fixes: 73064edfb864 ("hw/nvme: flexible data placement emulation")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Even if the host is somehow using compare to do compare-and-write, the
host should be notified immediately about the compare failure and not
have to wait for the driver to potentially retry the command.
Fixes: 0a384f923f51 ("hw/block/nvme: add compare command")
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Since the nvme_blk_read/write are used by both the data and metadata
portions of the IO, it can't have the 512B alignment requirement.
Without this change any metadata transfer, which length isn't a multiple
of 512B and which is bigger than 512B, will result in only a partial
transfer.
Signed-off-by: Mateusz Kozlowski <kozlowski.mateuszpl@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Add emulation of TP4146 ("Flexible Data Placement").
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jesper Devantier <j.devantier@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Add support for the Directive Send and Recv commands and the Identify
directive.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Add the mandatory Endurance Group identify data structures and log
pages.
For now, all namespaces in a subsystem belongs to a single Endurance
Group.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Each NvmeNamespace can be used by serveral controllers,
but a NvmeNamespace can at most belong to a single NvmeSubsystem.
Store a pointer to the NvmeSubsystem, if the namespace was realized
with a NvmeSubsystem.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Move the rounding of bytes read/written into nvme_smart_log which
reports in units of 512 bytes, rounded up in thousands. This is in
preparation for adding the Endurance Group Information log page which
reports in units of billions, rounded up.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
staging
hw/nvme updates
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEUigzqnXi3OaiR2bATeGvMW1PDekFAmO+anUACgkQTeGvMW1P
# Del4HAf/eqW92bf04CpXPzLMG38+FoYQgwkH8Lp390JlSM6kjv3DgPM2ygJXIEYr
# dV0KQpTcPRGAVCuXCSOUd6FTkAYdcPVtOeJeYhldEYj9cc9Y/9tvcBMthFBkiCU/
# 66TL7JEgFmOfVMrLypYpfrPHCN0lQVX+i2+Qruospg6itubAKcYdJq+Hx2WWHzcC
# hl/qNgSSIGlhQi21ada1iCUC8Q3TZzo54M+0tW4zfybzsG+eNM+ouKDl/qOHtQgP
# ON/ef9dl+0Dum1l5z7O+sPiXBzZRJR7V+jZOsbf0A98fxqmuu3YacVrH6mY/Zmdx
# e1xexJt6PVXaIKtoZQKRVn2C0ITjXA==
# =AvaO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Jan 2023 07:51:17 GMT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [full]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [full]
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9
* tag 'nvme-next-pull-request' of https://gitlab.com/birkelund/qemu:
hw/nvme: cleanup error reporting in nvme_init_pci()
hw/nvme: clean up confusing use of errp/local_err
hw/nvme: fix missing cq eventidx update
hw/nvme: fix missing endian conversions for doorbell buffers
hw/nvme: rename shadow doorbell related trace events
hw/nvme: use QOM accessors
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Replace the local Error variable with errp and ERRP_GUARD() and change
the return value to bool.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Remove an unnecessary local Error value in nvme_realize(). In the
process, change nvme_check_constraints() to return a bool.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Prior to reading the shadow doorbell cq head, we have to update the
eventidx. Otherwise, we risk that the driver will skip an mmio doorbell
write. This happens on riscv64, as reported by Guenter.
Adding the missing update to the cq eventidx fixes the issue.
Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Cc: qemu-riscv@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
The eventidx and doorbell value are not handling endianness correctly.
Fix this.
Fixes: 3f7fe8de3d49 ("hw/nvme: Implement shadow doorbell buffer support")
Cc: qemu-stable@nongnu.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Rename the trace events related to writing the event index and reading
the doorbell value to make it more clear that the event is associated
with an actual update (write or read respectively).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Replace various ->parent_obj use with the equivalent QOM accessors.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221123133811.1398562-1-armbru@redhat.com>
|
|
Fix a potential use-after-free by removing the bottom half and enqueuing
the completion directly.
Fixes: 796d20681d9b ("hw/nvme: reimplement the copy command to allow aio cancellation")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|