aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)Author
2024-08-20vhost: Add VIRTIO_NET_F_RSC_EXT to vhost feature bitsAkihiko Odaki
VIRTIO_NET_F_RSC_EXT is implemented in the rx data path, which vhost implements, so vhost needs to support the feature if it is ever to be enabled with vhost. The feature must be disabled otherwise. Fixes: 2974e916df87 ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK") Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20240802-rsc-v1-1-2b607bd2f555@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-08-16virtio-net: Use virtual time for RSC timersNicholas Piggin
Receive coalescing is visible to the target machine, so its timers should use virtual time like other timers in virtio-net, to be compatible with record-replay. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20240813050638.446172-10-npiggin@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240813202329.1237572-18-alex.bennee@linaro.org>
2024-08-16virtio-net: Use replay_schedule_bh_event for bhs that affect machine stateNicholas Piggin
The regular qemu_bh_schedule() calls result in non-deterministic execution of the bh in record-replay mode, which causes replay failure. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20240813050638.446172-9-npiggin@gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240813202329.1237572-17-alex.bennee@linaro.org>
2024-08-02virtio-net: Fix network stall at the host side waiting for kickthomas
Patch 06b12970174 ("virtio-net: fix network stall under load") added double-check to test whether the available buffer size can satisfy the request or not, in case the guest has added some buffers to the avail ring simultaneously after the first check. It will be lucky if the available buffer size becomes okay after the double-check, then the host can send the packet to the guest. If the buffer size still can't satisfy the request, even if the guest has added some buffers, viritio-net would stall at the host side forever. The patch enables notification and checks whether the guest has added some buffers since last check of available buffers when the available buffers are insufficient. If no buffer is added, return false, else recheck the available buffers in the loop. If the available buffers are sufficient, disable notification and return true. Changes: 1. Change the return type of virtqueue_get_avail_bytes() from void to int, it returns an opaque that represents the shadow_avail_idx of the virtqueue on success, else -1 on error. 2. Add a new API: virtio_queue_enable_notification_and_check(), it takes an opaque as input arg which is returned from virtqueue_get_avail_bytes(). It enables notification firstly, then checks whether the guest has added some buffers since last check of available buffers or not by virtio_queue_poll(), return ture if yes. The patch also reverts patch "06b12970174". The case below can reproduce the stall. Guest 0 +--------+ | iperf | ---------------> | server | Host | +--------+ +--------+ | ... | iperf |---- | client |---- Guest n +--------+ | +--------+ | | iperf | ---------------> | server | +--------+ Boot many guests from qemu with virtio network: qemu ... -netdev tap,id=net_x \ -device virtio-net-pci-non-transitional,\ iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x Each guest acts as iperf server with commands below: iperf3 -s -D -i 10 -p 8001 iperf3 -s -D -i 10 -p 8002 The host as iperf client: iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000 iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000 After some time, the host loses connection to the guest, the guest can send packet to the host, but can't receive packet from the host. It's more likely to happen if SWIOTLB is enabled in the guest, allocating and freeing bounce buffer takes some CPU ticks, copying from/to bounce buffer takes more CPU ticks, compared with that there is no bounce buffer in the guest. Once the rate of producing packets from the host approximates the rate of receiveing packets in the guest, the guest would loop in NAPI. receive packets --- | | v | free buf virtnet_poll | | v | add buf to avail ring --- | | need kick the host? | NAPI continues v receive packets --- | | v | free buf virtnet_poll | | v | add buf to avail ring --- | v ... ... On the other hand, the host fetches free buf from avail ring, if the buf in the avail ring is not enough, the host notifies the guest the event by writing the avail idx read from avail ring to the event idx of used ring, then the host goes to sleep, waiting for the kick signal from the guest. Once the guest finds the host is waiting for kick singal (in virtqueue_kick_prepare_split()), it kicks the host. The host may stall forever at the sequences below: Host Guest ------------ ----------- fetch buf, send packet receive packet --- ... ... | fetch buf, send packet add buf | ... add buf virtnet_poll buf not enough avail idx-> add buf | read avail idx add buf | add buf --- receive packet --- write event idx ... | wait for kick add buf virtnet_poll ... | --- no more packet, exit NAPI In the first loop of NAPI above, indicated in the range of virtnet_poll above, the host is sending packets while the guest is receiving packets and adding buffers. step 1: The buf is not enough, for example, a big packet needs 5 buf, but the available buf count is 3. The host read current avail idx. step 2: The guest adds some buf, then checks whether the host is waiting for kick signal, not at this time. The used ring is not empty, the guest continues the second loop of NAPI. step 3: The host writes the avail idx read from avail ring to used ring as event idx via virtio_queue_set_notification(q->rx_vq, 1). step 4: At the end of the second loop of NAPI, recheck whether kick is needed, as the event idx in the used ring written by the host is beyound the range of kick condition, the guest will not send kick signal to the host. Fixes: 06b12970174 ("virtio-net: fix network stall under load") Cc: qemu-stable@nongnu.org Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-08-02virtio-net: Ensure queue index fits with RSSAkihiko Odaki
Ensure the queue index points to a valid queue when software RSS enabled. The new calculation matches with the behavior of Linux's TAP device with the RSS eBPF program. Fixes: 4474e37a5b3a ("virtio-net: implement RX RSS processing") Reported-by: Zhibin Hu <huzhibin5@huawei.com> Cc: qemu-stable@nongnu.org Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-08-02rtl8139: Fix behaviour for old kernels.Hans
Old linux kernel rtl8139 drivers (ex. debian 2.1) uses outb to set the rx mode for RxConfig. Unfortunatelly qemu does not support outb for RxConfig. Signed-off-by: Hans <sungdgdhtryrt@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-08-01Revert "pcie_sriov: Ensure VF function number does not overflow"Michael S. Tsirkin
This reverts commit 77718701157f6ca77ea7a57b536fa0a22f676082. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-24Merge tag 'hw-misc-20240723' of https://github.com/philmd/qemu into stagingRichard Henderson
Misc HW patch queue - Restrict probe_access*() functions to TCG (Phil) - Extract do_invalidate_device_tlb from vtd_process_device_iotlb_desc (Clément) - Fixes in Loongson IPI model (Bibo & Phil) - Make docs/interop/firmware.json compatible with qapi-gen.py script (Thomas) - Correct MPC I2C MMIO region size (Zoltan) - Remove useless cast in Loongson3 Virt machine (Yao) - Various uses of range overlap API (Yao) - Use ERRP_GUARD macro in nubus_virtio_mmio_realize (Zhao) - Use DMA memory API in Goldfish UART model (Phil) - Expose fifo8_pop_buf and introduce fifo8_drop (Phil) - MAINTAINERS updates (Zhao, Phil) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmagFF8ACgkQ4+MsLN6t # wN5bKg//f5TwUhsy2ff0FJpHheDOj/9Gc2nZ1U/Fp0E5N3sz3A7MGp91wye6Xwi3 # XG34YN9LK1AVzuCdrEEs5Uaxs1ZS1R2mV+fZaGHwYYxPDdnXxGyp/2Q0eyRxzbcN # zxE2hWscYSZbPVEru4HvZJKfp4XnE1cqA78fJKMAdtq0IPq38tmQNRlJ+gWD9dC6 # ZUHXPFf3DnucvVuwqb0JYO/E+uJpcTtgR6pc09Xtv/HFgMiS0vKZ1I/6LChqAUw9 # eLMpD/5V2naemVadJe98/dL7gIUnhB8GTjsb4ioblG59AO/uojutwjBSQvFxBUUw # U5lX9OSn20ouwcGiqimsz+5ziwhCG0R6r1zeQJFqUxrpZSscq7NQp9ygbvirm+wS # edLc8yTPf4MtYOihzPP9jLPcXPZjEV64gSnJISDDFYWANCrysX3suaFEOuVYPl+s # ZgQYRVSSYOYHgNqBSRkPKKVUxskSQiqLY3SfGJG4EA9Ktt5lD1cLCXQxhdsqphFm # Ws3zkrVVL0EKl4v/4MtCgITIIctN1ZJE9u3oPJjASqSvK6EebFqAJkc2SidzKHz0 # F3iYX2AheWNHCQ3HFu023EvFryjlxYk95fs2f6Uj2a9yVbi813qsvd3gcZ8t0kTT # +dmQwpu1MxjzZnA6838R6OCMnC+UpMPqQh3dPkU/5AF2fc3NnN8= # =J/I2 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 24 Jul 2024 06:36:47 AM AEST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'hw-misc-20240723' of https://github.com/philmd/qemu: (28 commits) MAINTAINERS: Add myself as a reviewer of machine core MAINTAINERS: Cover guest-agent in QAPI schema util/fifo8: Introduce fifo8_drop() util/fifo8: Expose fifo8_pop_buf() util/fifo8: Rename fifo8_pop_buf() -> fifo8_pop_bufptr() util/fifo8: Rename fifo8_peek_buf() -> fifo8_peek_bufptr() util/fifo8: Use fifo8_reset() in fifo8_create() util/fifo8: Fix style chardev/char-fe: Document returned value on error hw/char/goldfish: Use DMA memory API hw/nubus/virtio-mmio: Fix missing ERRP_GUARD() in realize handler dump: make range overlap check more readable crypto/block-luks: make range overlap check more readable system/memory_mapping: make range overlap check more readable sparc/ldst_helper: make range overlap check more readable cxl/mailbox: make range overlap check more readable util/range: Make ranges_overlap() return bool hw/mips/loongson3_virt: remove useless type cast hw/i2c/mpc_i2c: Fix mmio region size docs/interop/firmware.json: convert "Example" section ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-23util/fifo8: Rename fifo8_pop_buf() -> fifo8_pop_bufptr()Philippe Mathieu-Daudé
Since fifo8_pop_buf() return a const buffer (which points directly into the FIFO backing store). Rename it using the 'bufptr' suffix to better reflect that it is a pointer to the internal buffer that is being returned. This will help differentiate with methods *copying* the FIFO data. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20240722160745.67904-6-philmd@linaro.org>
2024-07-21vhost,vhost-user: Add VIRTIO_F_IN_ORDER to vhost feature bitsJonah Palmer
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost devices. The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these devices ensures that the backend is capable of offering and providing support for this feature, and that it can be disabled if the backend does not support it. Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09hw/net:ftgmac100: update TX and RX packet buffers address to 64 bitsJamin Lin
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "TXDES 2" and "RXDES 2" to save the high part physical address of packet buffer. Ex: TX packet buffer address [34:0] The "TXDES 2" bits [18:16] which corresponds the bits [34:32] of the 64 bits address of the TX packet buffer address and "TXDES 3" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX packet buffer address. Update TX and RX packet buffers address type to 64 bits for dram 64 bits address DMA support. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: introduce TX and RX ring base address high registers to ↵Jamin Lin
support 64 bits ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "Normal Priority Transmit Ring Base Address Register High(0x17C)", "High Priority Transmit Ring Base Address Register High(0x184)" and "Receive Ring Base Address Register High(0x18C)" to save the high part physical address of descriptor manager. Ex: TX descriptor manager address [34:0] The "Normal Priority Transmit Ring Base Address Register High(0x17C)" bits [2:0] which corresponds the bits [34:32] of the 64 bits address of the TX ring buffer address. The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX ring buffer address. Introduce a new sub region which size is 0x100 for the set of new registers and map it at 0x100 in the container region. This sub region range is from 0x100 to 0x1ff. Introduce a new property and object attribute to activate the region for new registers. Introduce a new memop handlers for the new register read and write. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: update ring base address to 64 bitsJamin Lin
Update TX and RX ring base address data type to uint64_t for 64 bits dram address DMA support. Both "Normal Priority Transmit Ring Base Address Register(0x20)" and "Receive Ring Base Address Register (0x24)" are used for saving the low part physical address of descriptor manager. Therefore, changes to set TX and RX descriptor manager address bits [31:0] in ftgmac100_read and ftgmac100_write functions. Incrementing the version of vmstate to 2. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: update memory region size to 64KBJamin Lin
According to the datasheet of ASPEED SOCs, one MAC controller owns 128KB of register space for AST2500. However, one MAC controller only owns 64KB of register space for AST2600 and AST2700. It set the memory region size 128KB and it occupied another controllers Address Spaces. Update one MAC controller memory region size to 0x1000 because AST2500 did not use register spaces over than 64KB. Introduce a new container region size to 0x1000 and its range is from 0 to 0xfff. This container is mapped a sub region for the current set of register. This sub region range is from 0 to 0xff. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-03Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging virtio: features,fixes A bunch of improvements: - vhost dirty log is now only scanned once, not once per device - virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA - cxl gained DCD emulation support - pvpanic gained shutdown support - beginning of patchset for Generic Port Affinity Structure - s3 support - friendlier error messages when boot fails on some illegal configs - for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once - part of vhost-user support for any POSIX system - not yet enabled due to qtest failures - sr-iov VF setup code has been reworked significantly - new tests, particularly for risc-v ACPI - bugfixes Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr # njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16 # va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8 # vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC # w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG # BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc= # =p9h4 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits) hw/pci: Replace -1 with UINT32_MAX for romsize pcie_sriov: Register VFs after migration pcie_sriov: Remove num_vfs from PCIESriovPF pcie_sriov: Release VFs failed to realize pcie_sriov: Reuse SR-IOV VF device instances pcie_sriov: Ensure VF function number does not overflow pcie_sriov: Do not manually unrealize hw/ppc/spapr_pci: Do not reject VFs created after a PF hw/ppc/spapr_pci: Do not create DT for disabled PCI device hw/pci: Rename has_power to enabled virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged virtio: remove virtio_tswap16s() call in vring_packed_event_read() hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity. tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs meson.build: Add RISC-V to the edk2-target list tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path tests/data/acpi: Move x86 ACPI tables under x86/${machine} path tests/qtest/bios-tables-test.c: Set "arch" for x86 tests ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-03pcie_sriov: Ensure VF function number does not overflowAkihiko Odaki
pci_new() aborts when creating a VF with a function number equals to or is greater than PCI_DEVFN_MAX. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-02Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into ↵Richard Henderson
staging aspeed queue: * Coverity fixes * Deprecation of tacoma-bmc machine * Buffer overflow fix in GPIO model * Minor cleanup # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7 # 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6 # ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN # ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN # F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK # B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y # O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz # 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA # Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG # OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd # XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr # DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao= # =LxwO # -----END PGP SIGNATURE----- # gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu: hw/net:ftgmac100: fix coding style aspeed/sdmc: Remove extra R_MAIN_STATUS case aspeed/soc: Fix possible divide by zero aspeed/sdmc: Check RAM size value at realize time aspeed: Deprecate the tacoma-bmc machine hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-02hw/net:ftgmac100: fix coding styleJamin Lin
Fix coding style issues from checkpatch.pl Test command: ./scripts/checkpatch.pl --no-tree -f hw/net/ftgmac100.c Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-02hw/net/spapr: prevent potential NULL dereferenceOleg Sviridov
Pointer, returned from function 'spapr_vio_find_by_reg', may be NULL and is dereferenced immediately after. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Oleg Sviridov <oleg.sviridov@red-soft.ru> Message-ID: <20240531073636.3779559-1-oleg.sviridov@red-soft.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-07-01hw/net/virtio-net.c: fix crash in iov_copy()Dmitry Frolov
A crash found while fuzzing device virtio-net-socket-check-used. Assertion "offset == 0" in iov_copy() fails if less than guest_hdr_len bytes were transmited. Signed-off-by: Dmitry Frolov <frolov@swemel.ru> Message-Id: <20240613143529.602591-2-frolov@swemel.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-01vhost/vhost-user: Add VIRTIO_F_NOTIFICATION_DATA to vhost feature bitsJonah Palmer
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety of vhost devices. The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays for these devices ensures that the backend is capable of offering and providing support for this feature, and that it can be disabled if the backend does not support it. Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com> Acked-by: Srujana Challa <schalla@marvell.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-06-21hw/net/can/xlnx-versal-canfd: Fix sorting of the tx queueShiva sagar Myana
Returning an uint32_t casted to a gint from g_cmp_ids causes the tx queue to become wrongly sorted when executing g_slist_sort. Fix this by always returning -1 or 1 from g_cmp_ids based on the ID comparison instead. Also, if two message IDs are the same, sort them by using their index and transmit the message at the lowest index first. Signed-off-by: Shiva sagar Myana <Shivasagar.Myana@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240603051732.3334571-1-Shivasagar.Myana@amd.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-06-18hw/net: Fix the transmission return sizeFea.Wang
Fix the transmission return size because not all bytes could be transmitted successfully. So, return a successful length instead of a constant value. Signed-off-by: Fea.Wang <fea.wang@sifive.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
2024-06-04virtio-net: drop too short packets earlyAlexey Dobriyan
Reproducer from https://gitlab.com/qemu-project/qemu/-/issues/1451 creates small packet (1 segment, len = 10 == n->guest_hdr_len), then destroys queue. "if (n->host_hdr_len != n->guest_hdr_len)" is triggered, if body creates zero length/zero segment packet as there is nothing after guest header. qemu_sendv_packet_async() tries to send it. slirp discards it because it is smaller than Ethernet header, but returns 0 because tx hooks are supposed to return total length of data. 0 is propagated upwards and is interpreted as "packet has been sent" which is terrible because queue is being destroyed, nobody is waiting for TX to complete and assert it triggered. Fix is discard such empty packets instead of sending them. Length 1 packets will go via different codepath: virtqueue_push(q->tx_vq, elem, 0); virtio_notify(vdev, q->tx_vq); g_free(elem); and aren't problematic. Signed-off-by: Alexey Dobriyan <adobriyan@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Do not write hashes to peer bufferAkihiko Odaki
The peer buffer is qualified with const and not meant to be modified. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Always set populate_hashAkihiko Odaki
The member is not cleared during reset so may have a stale value. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Unify the logic to update NIC state for RSSAkihiko Odaki
The code to attach or detach the eBPF program to RSS were duplicated so unify them into one function to save some code. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Disable RSS on resetAkihiko Odaki
RSS is disabled by default. Fixes: 590790297c ("virtio-net: implement RSS configuration command") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Shrink header byte swapping bufferAkihiko Odaki
Byte swapping is only performed for the part of header shared with the legacy standard and the buffer only needs to cover it. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Copy header only when necessaryAkihiko Odaki
The copied header is only used for byte swapping. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Add only one queue pair when realizingAkihiko Odaki
Multiqueue usage is not negotiated yet when realizing. If more than one queue is added and the guest never requests to enable multiqueue, the extra queues will not be deleted when unrealizing and leak. Fixes: f9d6dbf0bf6e ("virtio-net: remove virtio queues if the guest doesn't support multiqueue") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04virtio-net: Do not propagate ebpf-rss-fds errorsAkihiko Odaki
Propagating ebpf-rss-fds errors has several problems. First, it makes device realization fail and disables the fallback to the conventional eBPF loading. Second, it leaks memory by making device realization fail without freeing memory already allocated. Third, the convention is to set an error when a function returns false, but virtio_net_load_ebpf_fds() and virtio_net_load_ebpf() returns false without setting an error, which is confusing. Remove the propagation to fix these problems. Fixes: 0524ea0510a3 ("ebpf: Added eBPF initialization by fds.") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-06-04tap: Remove qemu_using_vnet_hdr()Akihiko Odaki
Since qemu_set_vnet_hdr_len() is always called when qemu_using_vnet_hdr() is called, we can merge them and save some code. For consistency, express that the virtio-net header is not in use by returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated function, qemu_get_using_vnet_hdr(). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-04-25Merge tag 'hw-misc-20240425' of https://github.com/philmd/qemu into stagingRichard Henderson
Misc HW patch queue - Script to compare machines compat_props[] (Maksim) - Introduce 'module' CPU topology level (Zhao) - Various cleanups (Thomas, Zhao, Inès, Bernhard) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYqN3wACgkQ4+MsLN6t # wN4hTw/9FHsItnEkme/864DRPSP7A9mCGa+JfzJmsL8oUb9fBjXXKm+lNchMLu3B # uvzfXB2Ea24yf5vyrldo0XlU3i/4GDvqXTI6YFYqBvitGICauYBu+6n2NZh2Y/Pn # zZCcVo167o0q7dHu2WSrZ6cSUchsF2C80HjuS07QaN2YZ7QMuN1+uqTjCQ/JHQWA # MH4xHh7cXdfCbbv8iNhMWn6sa+Bw/UyfRcc2W6w9cF5Q5cuuTshgDyd0JBOzkM1i # Mcul7TuKrSiLUeeeqfTjwtw3rtbNfkelV3ycgvgECFAlzPSjF5a6d/EGdO2zo3T/ # aFZnQBYrb4U0SzsmfXFHW7cSylIc1Jn2CCuZZBIvdVcu8TGDD5XsgZbGoCfKdWxp # l67qbQJy1Mp3LrRzygJIaxDOfE8fhhRrcIxfK/GoTHaCkqeFRkGjTeiDTVBqAES2 # zs6kUYZyG/xGaa2tsMu+HbtSO5EEqPC2QCdHayY3deW42Kwjj/HFV50Ya8YgYSVp # gEAjTDOle2dDjlkYud+ymTJz7LnGb3G7q0EZRI9DWolx/bu+uZGQqTSRRre4qFQY # SgN576hsFGN4NdM7tyJWiiqD/OC9ZeqUx3gGBtmI52Q6obBCE9hcow0fPs55Tk95 # 1YzPrt/3IoPI5ZptCoA8DFiysQ46OLtpIsQO9YcrpJmxWyLDSr0= # =tm+U # -----END PGP SIGNATURE----- # gpg: Signature made Thu 25 Apr 2024 03:59:08 AM PDT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'hw-misc-20240425' of https://github.com/philmd/qemu: (22 commits) hw/core: Support module-id in numa configuration hw/core: Introduce module-id as the topology subindex hw/core/machine: Support modules in -smp hw/core/machine: Introduce the module as a CPU topology level hw/i386/pc_sysfw: Remove unused parameter from pc_isa_bios_init() hw/misc : Correct 5 spaces indents in stm32l4x5_exti hw/xtensa: Include missing 'exec/cpu-common.h' in 'bootparam.h' hw/elf_ops: Rename elf_ops.h -> elf_ops.h.inc hw/cxl/cxl-cdat: Make cxl_doe_cdat_init() return boolean hw/cxl/cxl-cdat: Make ct3_build_cdat() return boolean hw/cxl/cxl-cdat: Make ct3_load_cdat() return boolean hw: Add a Kconfig switch for the TYPE_CPU_CLUSTER device hw: Fix problem with the A*MPCORE switches in the Kconfig files hw/riscv/virt: Replace sprintf by g_strdup_printf hw/misc/imx: Replace sprintf() by snprintf() hw/misc/applesmc: Simplify DeviceReset handler target/i386: Move APIC related code to cpu-apic.c hw/core: Remove check on NEED_CPU_H in tcg-cpu-ops.h scripts: add script to compare compatibility properties python/qemu/machine: add method to retrieve QEMUMachine::binary field ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-25hw/misc/imx: Replace sprintf() by snprintf()Philippe Mathieu-Daudé
sprintf() is deprecated on Darwin since macOS 13.0 / XCode 14.1, resulting in painful developer experience. Use snprintf() instead. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240411104340.6617-6-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-25hw, target: Add ResetType argument to hold and exit phase methodsPeter Maydell
We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org
2024-04-10hw/net/net_tx_pkt: Fix overrun in update_sctp_checksum()Philippe Mathieu-Daudé
If a fragmented packet size is too short, do not try to calculate its checksum. Reproduced using: $ cat << EOF | qemu-system-i386 -display none -nodefaults \ -machine q35,accel=qtest -m 32M \ -device igb,netdev=net0 \ -netdev user,id=net0 \ -qtest stdio outl 0xcf8 0x80000810 outl 0xcfc 0xe0000000 outl 0xcf8 0x80000804 outw 0xcfc 0x06 write 0xe0000403 0x1 0x02 writel 0xe0003808 0xffffffff write 0xe000381a 0x1 0x5b write 0xe000381b 0x1 0x00 EOF Assertion failed: (offset == 0), function iov_from_buf_full, file util/iov.c, line 39. #1 0x5575e81e952a in iov_from_buf_full qemu/util/iov.c:39:5 #2 0x5575e6500768 in net_tx_pkt_update_sctp_checksum qemu/hw/net/net_tx_pkt.c:144:9 #3 0x5575e659f3e1 in igb_setup_tx_offloads qemu/hw/net/igb_core.c:478:11 #4 0x5575e659f3e1 in igb_tx_pkt_send qemu/hw/net/igb_core.c:552:10 #5 0x5575e659f3e1 in igb_process_tx_desc qemu/hw/net/igb_core.c:671:17 #6 0x5575e659f3e1 in igb_start_xmit qemu/hw/net/igb_core.c:903:9 #7 0x5575e659f3e1 in igb_set_tdt qemu/hw/net/igb_core.c:2812:5 #8 0x5575e657d6a4 in igb_core_write qemu/hw/net/igb_core.c:4248:9 Fixes: CVE-2024-3567 Cc: qemu-stable@nongnu.org Reported-by: Zheyu Ma <zheyuma97@gmail.com> Fixes: f199b13bc1 ("igb: Implement Tx SCTP CSO") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2273 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20240410070459.49112-1-philmd@linaro.org>
2024-04-10hw/net/lan9118: Fix overflow in MIL TX FIFOPhilippe Mathieu-Daudé
When the MAC Interface Layer (MIL) transmit FIFO is full, truncate the packet, and raise the Transmitter Error (TXE) flag. Broken since model introduction in commit 2a42499017 ("LAN9118 emulation"). When using the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/2267 we get: hw/net/lan9118.c:798:17: runtime error: index 2048 out of bounds for type 'uint8_t[2048]' (aka 'unsigned char[2048]')     #0 0x563ec9a057b1 in tx_fifo_push hw/net/lan9118.c:798:43     #1 0x563ec99fbb28 in lan9118_writel hw/net/lan9118.c:1042:9     #2 0x563ec99f2de2 in lan9118_16bit_mode_write hw/net/lan9118.c:1205:9     #3 0x563ecbf78013 in memory_region_write_accessor system/memory.c:497:5     #4 0x563ecbf776f5 in access_with_adjusted_size system/memory.c:573:18     #5 0x563ecbf75643 in memory_region_dispatch_write system/memory.c:1521:16     #6 0x563ecc01bade in flatview_write_continue_step system/physmem.c:2713:18     #7 0x563ecc01b374 in flatview_write_continue system/physmem.c:2743:19     #8 0x563ecbff1c9b in flatview_write system/physmem.c:2774:12     #9 0x563ecbff1768 in address_space_write system/physmem.c:2894:18 ... [*] LAN9118 DS00002266B.pdf, Table 5.3.3 "INTERRUPT STATUS REGISTER" Cc: qemu-stable@nongnu.org Reported-by: Will Lester Reported-by: Chuhong Yuan <hslester96@gmail.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2267 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240409133801.23503-3-philmd@linaro.org>
2024-04-10hw/net/lan9118: Replace magic '2048' value by MIL_TXFIFO_SIZE definitionPhilippe Mathieu-Daudé
The magic 2048 is explained in the LAN9211 datasheet (DS00002414A) in chapter 1.4, "10/100 Ethernet MAC": The MAC Interface Layer (MIL), within the MAC, contains a 2K Byte transmit and a 128 Byte receive FIFO which is separate from the TX and RX FIFOs. [...] Note, the use of the constant in lan9118_receive() reveals that our implementation is using the same buffer for both tx and rx. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240409133801.23503-2-philmd@linaro.org>
2024-04-09Revert "hw/virtio: Add support for VDPA network simulation devices"Michael S. Tsirkin
This reverts commit cd341fd1ffded978b2aa0b5309b00be7c42e347c. The patch adds non-upstream code in include/standard-headers/linux/virtio_pci.h which would make maintainance harder. Revert for now. Suggested-by: Jason Wang <jasowang@redhat.com> Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-02hw/net/virtio-net: fix qemu set used ring flag even vhost startedYajun Wu
When vhost-user or vhost-kernel is handling virtio net datapath, QEMU should not touch used ring. But with vhost-user socket reconnect scenario, in a very rare case (has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in following code path: #0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511 #1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576 #2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801 #3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248 #4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525 #5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321 #6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774 #7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259 #8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199 #9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783 #10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592 #11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266 #12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412 #13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311 #14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392 #15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455 #16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459 #17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301 #18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62 #19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82 This issue causes guest kernel stop kicking device and traffic stop. Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong VRING_USED_F_NO_NOTIFY set. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20240402045109.97729-1-yajunw@nvidia.com> [PMD: Use unlikely()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-29hw/net/net_tx_pkt: Fix virtio header without checksum offloadingAkihiko Odaki
It is incorrect to have the VIRTIO_NET_HDR_F_NEEDS_CSUM set when checksum offloading is disabled so clear the bit. TCP/UDP checksum is usually offloaded when the peer requires virtio headers because they can instruct the peer to compute checksum. However, igb disables TX checksum offloading when a VF is enabled whether the peer requires virtio headers because a transmitted packet can be routed to it and it expects the packet has a proper checksum. Therefore, it is necessary to have a correct virtio header even when checksum offloading is disabled. A real TCP/UDP checksum will be computed and saved in the buffer when checksum offloading is disabled. The virtio specification requires to set the packet checksum stored in the buffer to the TCP/UDP pseudo header when the VIRTIO_NET_HDR_F_NEEDS_CSUM bit is set so the bit must be cleared in that case. Fixes: ffbd2dbd8e64 ("e1000e: Perform software segmentation for loopback") Buglink: https://issues.redhat.com/browse/RHEL-23067 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-03-29virtio-net: Fix vhost virtqueue notifiers for RSSAkihiko Odaki
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask() checked VIRTIO_NET_F_MQ to know there are multiple queues, but VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue, which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is enabled. Fixes: 68b0a6395f36 ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-03-26vdpa-dev: Fix initialisation order to restore VDUSE compatibilityKevin Wolf
VDUSE requires that virtqueues are first enabled before the DRIVER_OK status flag is set; with the current API of the kernel module, it is impossible to enable the opposite order in our block export code because userspace is not notified when a virtqueue is enabled. This requirement also mathces the normal initialisation order as done by the generic vhost code in QEMU. However, commit 6c482547 accidentally changed the order for vdpa-dev and broke access to VDUSE devices with this. This changes vdpa-dev to use the normal order again and use the standard vhost callback .vhost_set_vring_enable for this. VDUSE devices can be used with vdpa-dev again after this fix. vhost_net intentionally avoided enabling the vrings for vdpa and does this manually later while it does enable them for other vhost backends. Reflect this in the vhost_net code and return early for vdpa, so that the behaviour doesn't change for this device. Cc: qemu-stable@nongnu.org Fixes: 6c4825476a43 ('vdpa: move vhost_vdpa_set_vring_ready to the caller') Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240315155949.86066-1-kwolf@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-13Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes more memslots support in libvhost-user support PCIe Gen5/Gen6 link speeds in pcie more traces in vdpa network simulation devices support in vdpa SMBIOS type 9 descriptor implementation Bump max_cpus to 4096 vcpus in q35 aw-bits and granule options in VIRTIO-IOMMU Support report NUMA nodes for device memory using GI in acpi Beginning of shutdown event support in pvpanic fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/ # 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt # +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ # uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr # 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G # 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg= # =C0UU # -----END PGP SIGNATURE----- # gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits) docs/specs/pvpanic: document shutdown event hw/cxl: Fix missing reserved data in CXL Device DVSEC hmat acpi: Fix out of bounds access due to missing use of indirection hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory. qemu-options.hx: Document the virtio-iommu-pci aw-bits option hw/arm/virt: Set virtio-iommu aw-bits default value to 48 hw/i386/q35: Set virtio-iommu aw-bits default value to 39 virtio-iommu: Add an option to define the input range width virtio-iommu: Trace domain range limits as unsigned int qemu-options.hx: Document the virtio-iommu-pci granule option virtio-iommu: Change the default granule to the host page size virtio-iommu: Add a granule property hw/i386/acpi-build: Add support for SRAT Generic Initiator structures hw/acpi: Implement the SRAT GI affinity structure qom: new object to associate device to NUMA node hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it hw/i386/pc: Set "normal" boot device order in pc_basic_device_init() hw/i386/pc: Avoid one use of the current_machine global hw/i386/pc: Remove "rtc_state" link again Revert "hw/i386/pc: Confine system flash handling to pc_sysfw" ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/core/machine.c
2024-03-12hw/pci: Always call pcie_sriov_pf_reset()Akihiko Odaki
Call pcie_sriov_pf_reset() from pci_do_device_reset() just as we do for msi_reset() and msix_reset() to prevent duplicating code for each SR-IOV PF. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20240228-reuse-v8-5-282660281e60@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
2024-03-12pcie_sriov: Reset SR-IOV extended capabilityAkihiko Odaki
pcie_sriov_pf_disable_vfs() is called when resetting the PF, but it only disables VFs and does not reset SR-IOV extended capability, leaking the state and making the VF Enable register inconsistent with the actual state. Replace pcie_sriov_pf_disable_vfs() with pcie_sriov_pf_reset(), which does not only disable VFs but also resets the capability. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20240228-reuse-v8-3-282660281e60@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
2024-03-12hw/virtio: Add support for VDPA network simulation devicesHao Chen
This patch adds support for VDPA network simulation devices. The device is developed based on virtio-net and tap backend, and supports hardware live migration function. For more details, please refer to "docs/system/devices/vdpa-net.rst" Signed-off-by: Hao Chen <chenh@yusur.tech> Message-Id: <20240221073802.2888022-1-chenh@yusur.tech> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12virtio-net: Added property to load eBPF RSS with fds.Andrew Melnychenko
eBPF RSS program and maps may now be passed during initialization. Initially was implemented for libvirt to launch qemu without permissions, and initialized eBPF program through the helper. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2024-03-12Avoid unaligned fetch in ladr_match()Nick Briggs
There is no guarantee that the PCNetState is allocated such that csr[8] is allocated on an 8-byte boundary. Since not all hosts are capable of unaligned fetches the 16-bit elements need to be fetched individually to avoid a potential fault. Closes issue #2143 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143 Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 19:25:17 +0000