aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)Author
2024-06-11virtio-net: drop too short packets earlyAlexey Dobriyan
Reproducer from https://gitlab.com/qemu-project/qemu/-/issues/1451 creates small packet (1 segment, len = 10 == n->guest_hdr_len), then destroys queue. "if (n->host_hdr_len != n->guest_hdr_len)" is triggered, if body creates zero length/zero segment packet as there is nothing after guest header. qemu_sendv_packet_async() tries to send it. slirp discards it because it is smaller than Ethernet header, but returns 0 because tx hooks are supposed to return total length of data. 0 is propagated upwards and is interpreted as "packet has been sent" which is terrible because queue is being destroyed, nobody is waiting for TX to complete and assert it triggered. Fix is discard such empty packets instead of sending them. Length 1 packets will go via different codepath: virtqueue_push(q->tx_vq, elem, 0); virtio_notify(vdev, q->tx_vq); g_free(elem); and aren't problematic. Signed-off-by: Alexey Dobriyan <adobriyan@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 2c3e4e2de699cd4d9f6c71f30a22d8f125cd6164) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-10hw/net/lan9118: Replace magic '2048' value by MIL_TXFIFO_SIZE definitionPhilippe Mathieu-Daudé
The magic 2048 is explained in the LAN9211 datasheet (DS00002414A) in chapter 1.4, "10/100 Ethernet MAC": The MAC Interface Layer (MIL), within the MAC, contains a 2K Byte transmit and a 128 Byte receive FIFO which is separate from the TX and RX FIFOs. [...] Note, the use of the constant in lan9118_receive() reveals that our implementation is using the same buffer for both tx and rx. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240409133801.23503-2-philmd@linaro.org> (cherry picked from commit a45223467e4e185fff1c76a6483784fa379ded77) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-10hw/net/lan9118: Fix overflow in MIL TX FIFOPhilippe Mathieu-Daudé
When the MAC Interface Layer (MIL) transmit FIFO is full, truncate the packet, and raise the Transmitter Error (TXE) flag. Broken since model introduction in commit 2a42499017 ("LAN9118 emulation"). When using the reproducer from https://gitlab.com/qemu-project/qemu/-/issues/2267 we get: hw/net/lan9118.c:798:17: runtime error: index 2048 out of bounds for type 'uint8_t[2048]' (aka 'unsigned char[2048]')     #0 0x563ec9a057b1 in tx_fifo_push hw/net/lan9118.c:798:43     #1 0x563ec99fbb28 in lan9118_writel hw/net/lan9118.c:1042:9     #2 0x563ec99f2de2 in lan9118_16bit_mode_write hw/net/lan9118.c:1205:9     #3 0x563ecbf78013 in memory_region_write_accessor system/memory.c:497:5     #4 0x563ecbf776f5 in access_with_adjusted_size system/memory.c:573:18     #5 0x563ecbf75643 in memory_region_dispatch_write system/memory.c:1521:16     #6 0x563ecc01bade in flatview_write_continue_step system/physmem.c:2713:18     #7 0x563ecc01b374 in flatview_write_continue system/physmem.c:2743:19     #8 0x563ecbff1c9b in flatview_write system/physmem.c:2774:12     #9 0x563ecbff1768 in address_space_write system/physmem.c:2894:18 ... [*] LAN9118 DS00002266B.pdf, Table 5.3.3 "INTERRUPT STATUS REGISTER" Cc: qemu-stable@nongnu.org Reported-by: Will Lester Reported-by: Chuhong Yuan <hslester96@gmail.com> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2267 Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20240409133801.23503-3-philmd@linaro.org> (cherry picked from commit ad766d603f39888309cfb1433ba2de1d0e9e4f58) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-09hw/net/virtio-net: fix qemu set used ring flag even vhost startedYajun Wu
When vhost-user or vhost-kernel is handling virtio net datapath, QEMU should not touch used ring. But with vhost-user socket reconnect scenario, in a very rare case (has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in following code path: #0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511 #1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576 #2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801 #3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248 #4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525 #5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321 #6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774 #7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259 #8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199 #9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783 #10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592 #11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266 #12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412 #13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311 #14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392 #15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455 #16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459 #17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301 #18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62 #19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82 This issue causes guest kernel stop kicking device and traffic stop. Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong VRING_USED_F_NO_NOTIFY set. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20240402045109.97729-1-yajunw@nvidia.com> [PMD: Use unlikely()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit 4c54f5bc8e1d38f15cc35b6a6932d8fbe219c692) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-09virtio-net: Fix vhost virtqueue notifiers for RSSAkihiko Odaki
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask() checked VIRTIO_NET_F_MQ to know there are multiple queues, but VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue, which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is enabled. Fixes: 68b0a6395f36 ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 1c188fc8cbffc5f05cc616cab4e1372fb6e6f11f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-13Avoid unaligned fetch in ladr_match()Nick Briggs
There is no guarantee that the PCNetState is allocated such that csr[8] is allocated on an 8-byte boundary. Since not all hosts are capable of unaligned fetches the 16-bit elements need to be fetched individually to avoid a potential fault. Closes issue #2143 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2143 Signed-off-by: Nick Briggs <nicholas.h.briggs@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 6a5287ce80470bb8df95901d73ee779a64e70c3a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-13e1000e: fix link state on resumeLaurent Vivier
On resume e1000e_vm_state_change() always calls e1000e_autoneg_resume() that sets link_down to false, and thus activates the link even if we have disabled it. The problem can be reproduced starting qemu in paused state (-S) and then set the link to down. When we resume the machine the link appears to be up. Reproducer: # qemu-system-x86_64 ... -device e1000e,netdev=netdev0,id=net0 -S {"execute": "qmp_capabilities" } {"execute": "set_link", "arguments": {"name": "net0", "up": false}} {"execute": "cont" } To fix the problem, merge the content of e1000e_vm_state_change() into e1000e_core_post_load() as e1000 does. Buglink: https://issues.redhat.com/browse/RHEL-21867 Fixes: 6f3fbe4ed06a ("net: Introduce e1000e device emulation") Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 4cadf10234989861398e19f3bb441d3861f3bb7c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-26virtio-net: correctly copy vnet header when flushing TXJason Wang
When HASH_REPORT is negotiated, the guest_hdr_len might be larger than the size of the mergeable rx buffer header. Using virtio_net_hdr_mrg_rxbuf during the header swap might lead a stack overflow in this case. Fixing this by using virtio_net_hdr_v1_hash instead. Reported-by: Xiao Lei <leixiao.nop@zju.edu.cn> Cc: Yuri Benditovich <yuri.benditovich@daynix.com> Cc: qemu-stable@nongnu.org Cc: Mauro Matteo Cascella <mcascell@redhat.com> Fixes: CVE-2023-6693 Fixes: e22f0603fb2f ("virtio-net: reference implementation of hash report") Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 2220e8189fb94068dbad333228659fbac819abb0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-29net: Provide MemReentrancyGuard * to qemu_new_nic()Akihiko Odaki
Recently MemReentrancyGuard was added to DeviceState to record that the device is engaging in I/O. The network device backend needs to update it when delivering a packet to a device. In preparation for such a change, add MemReentrancyGuard * as a parameter of qemu_new_nic(). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 7d0fefdf81f5973334c344f6b8e1896c309dff66) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: fixup in hw/net/xen_nic.c due to lack of v8.1.0-2771-g25967ff69f "hw/xen: update Xen PV NIC to XenDevice model" and removed hw/net/igb.c bits)
2023-09-11hw/net/vmxnet3: Fix guest-triggerable assert()Thomas Huth
The assert() that checks for valid MTU sizes can be triggered by the guest (e.g. with the reproducer code from the bug ticket https://gitlab.com/qemu-project/qemu/-/issues/517 ). Let's avoid this problem by simply logging the error and refusing to activate the device instead. Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate") Signed-off-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> [Mjt: change format specifier from %d to %u for uint32_t argument] (cherry picked from commit 90a0778421acdf4ca903be64c8ed19378183c944) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-09-11hw: replace most qemu_bh_new calls with qemu_bh_new_guardedAlexander Bulekov
This protects devices from bh->mmio reentrancy issues. Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230427211013.2994127-5-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit f63192b0544af5d3e4d5edfd85ab520fcf671377) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-07-31virtio-net: pass Device-TLB enable/disable events to vhostViktor Prutyanov
If vhost is enabled for virtio-net, Device-TLB enable/disable events must be passed to vhost for proper IOMMU unmap flag selection. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230626091258.24453-3-viktor@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit cd9b8346884353ba9ae6560b44b7cccdf00a6633) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-28rtl8139: fix large_send_mss divide-by-zeroStefan Hajnoczi
If the driver sets large_send_mss to 0 then a divide-by-zero occurs. Even if the division wasn't a problem, the for loop that emits MSS-sized packets would never terminate. Solve these issues by skipping offloading when large_send_mss=0. This issue was found by OSS-Fuzz as part of Alexander Bulekov's device fuzzing work. The reproducer is: $ cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \ 512M,slots=1,maxmem=0xffff000000000000 -machine q35 -nodefaults -device \ rtl8139,netdev=net0 -netdev user,id=net0 -device \ pc-dimm,id=nv1,memdev=mem1,addr=0xb800a64602800000 -object \ memory-backend-ram,id=mem1,size=2M -qtest stdio outl 0xcf8 0x80000814 outl 0xcfc 0xe0000000 outl 0xcf8 0x80000804 outw 0xcfc 0x06 write 0xe0000037 0x1 0x04 write 0xe00000e0 0x2 0x01 write 0x1 0x1 0x04 write 0x3 0x1 0x98 write 0xa 0x1 0x8c write 0xb 0x1 0x02 write 0xc 0x1 0x46 write 0xd 0x1 0xa6 write 0xf 0x1 0xb8 write 0xb800a646028c000c 0x1 0x08 write 0xb800a646028c000e 0x1 0x47 write 0xb800a646028c0010 0x1 0x02 write 0xb800a646028c0017 0x1 0x06 write 0xb800a646028c0036 0x1 0x80 write 0xe00000d9 0x1 0x40 EOF Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1582 Closes: https://gitlab.com/qemu-project/qemu/-/issues/1582 Cc: qemu-stable@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org> Fixes: 6d71357a3b65 ("rtl8139: honor large send MSS value") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 792676c165159c11412346870fd58fd243ab2166) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-23e1000e: Fix tx/rx counterstimothee.cocault@gmail.com
The bytes and packets counter registers are cleared on read. Copying the "total counter" registers to the "good counter" registers has side effects. If the "total" register is never read by the OS, it only gets incremented. This leads to exponential growth of the "good" register. This commit increments the counters individually to avoid this. Signed-off-by: Timothée Cocault <timothee.cocault@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 8d689f6aae8be096b4a1859be07c1b083865f755) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: removed hw/net/igb_core.c part: igb introduced in 8.0)
2023-05-23e1000: Count CRC in Tx statisticsAkihiko Odaki
The Software Developer's Manual 13.7.4.5 "Packets Transmitted (64 Bytes) Count" says: > This register counts the number of packets transmitted that are > exactly 64 bytes (from <Destination Address> through <CRC>, > inclusively) in length. It also says similar for the other Tx statistics registers. Add the number of bytes for CRC to those registers. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit c50b152485d4e10dfa1e1d7ea668f29a5fb92e9c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: pick this for 7.2 too: a fix by its own and makes next patch to apply cleanly)
2023-05-22virtio-net: not enable vq reset feature unconditionallyEugenio Pérez
The commit 93a97dc5200a ("virtio-net: enable vq reset feature") enables unconditionally vq reset feature as long as the device is emulated. This makes impossible to actually disable the feature, and it causes migration problems from qemu version previous than 7.2. The entire final commit is unneeded as device system already enable or disable the feature properly. This reverts commit 93a97dc5200a95e63b99cb625f20b7ae802ba413. Fixes: 93a97dc5200a ("virtio-net: enable vq reset feature") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230504101447.389398-1-eperezma@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 1fac00f70b3261050af5564b20ca55c1b2a3059a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fieldsPeter Maydell
In allwinner-sun8i-emac we just read directly from guest memory into a host FrameDescriptor struct and back. This only works on little-endian hosts. Reading and writing of descriptors is already abstracted into functions; make those functions also handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order, and fix two places that were doing ad-hoc descriptor reading without using the functions. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org (cherry picked from commit a4ae17e5ec512862bf73e40dfbb1e7db71f2c1e7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()Peter Maydell
The msf2-emac ethernet controller has functions emac_load_desc() and emac_store_desc() which read and write the in-memory descriptor blocks and handle conversion between guest and host endianness. As currently written, emac_store_desc() does the endianness conversion in-place; this means that it effectively consumes the input EmacDesc struct, because on a big-endian host the fields will be overwritten with the little-endian versions of their values. Unfortunately, in all the callsites the code continues to access fields in the EmacDesc struct after it has called emac_store_desc() -- specifically, it looks at the d.next field. The effect of this is that on a big-endian host networking doesn't work because the address of the next descriptor is corrupted. We could fix this by making the callsite avoid using the struct; but it's more robust to have emac_store_desc() leave its input alone. (emac_load_desc() also does an in-place conversion, but here this is fine, because the function is supposed to be initializing the struct.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org (cherry picked from commit d565f58b38424e9a390a7ea33ff7477bab693fda) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-03-30hw/net/vmxnet3: allow VMXNET3_MAX_MTU itself as a valueFiona Ebner
Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a valid value for the MTU, but a guest running ESXi 7.0 might try to set it and fail the assert [0]. In the Linux kernel, dev->max_mtu itself is a valid value for the MTU and for the vmxnet3 driver it's 9000, so a guest running Linux will also fail the assert when trying to set an MTU of 9000. VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer allocations/accesses, so allowing the upper limit itself as a value should be fine. [0]: https://forum.proxmox.com/threads/114011/ Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)") Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 099a63828130843741d317cb28e936f468b2b53b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2022-12-04Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi
into staging virtio: regression fix Fixes regression with migration and vsock, as fixing that exposes some known issues in vhost user cleanup, this attempts to fix those as well. More work on vhost user is needed :) Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3 # 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn # icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn # Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ # eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh # Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0= # =ZkaX # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Dec 2022 02:37:05 EST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: include/hw: VM state takes precedence in virtio_device_should_start hw/virtio: generalise CHR_EVENT_CLOSED handling hw/virtio: add started_vu status field to vhost-user-gpio vhost: enable vrings in vhost_dev_start() for vhost-user devices tests/qtests: override "force-legacy" for gpio virtio-mmio tests Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-12-01vhost: enable vrings in vhost_dev_start() for vhost-user devicesStefano Garzarella
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features") properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user backend, but we forgot to enable vrings as specified in docs/interop/vhost-user.rst: If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the ring starts directly in the enabled state. If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is initialized in a disabled state and is enabled by ``VHOST_USER_SET_VRING_ENABLE`` with parameter 1. Some vhost-user front-ends already did this by calling vhost_ops.vhost_set_vring_enable() directly: - backends/cryptodev-vhost.c - hw/net/virtio-net.c - hw/virtio/vhost-user-gpio.c But most didn't do that, so we would leave the vrings disabled and some backends would not work. We observed this issue with the rust version of virtiofsd [1], which uses the event loop [2] provided by the vhost-user-backend crate where requests are not processed if vring is not enabled. Let's fix this issue by enabling the vrings in vhost_dev_start() for vhost-user front-ends that don't already do this directly. Same thing also in vhost_dev_stop() where we disable vrings. [1] https://gitlab.com/virtio-fs/virtiofsd [2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217 Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features") Reported-by: German Maglione <gmaglione@redhat.com> Tested-by: German Maglione <gmaglione@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20221123131630.52020-1-sgarzare@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-22Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi
into staging pc,virtio: regression, test fixes fixes regressions: virtio error message triggered by seabios failure in vhost due to VIRTIO_F_RING_RESET broken keyboard under seabios some biosbits test fixes there's still a known regression with migration and vsock, not fixed yet. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmN8os4PHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpw+UH/2JOoxqzkkq4QyV5PzmjsiyyMbrBqFSOTro2 # 98k9MwxNWHIk6fi3FVIz+LX1EdwDbMl44IHQ88xo7k39V7ThvVvLfjaQySSeoCfE # 04++AvkOQ/O8W7sob17r2iPWIHKPIndq8uB652T89o1I/nhmFMsUkdRWmVQ3XsDk # DnPZxjBQnKY0oSvBd7SmSI3C+eA4lF1tht50ZxmOshLx4OSjK/maFVpIyLsUGTMn # 6OMxKffDjfvw5z94+pGN1RQm9xu7OwtFZyUnH16xoQUmWSXjzcYXUZ3buTY+eAyJ # I5j9ox27Cqn1wGcypUiTCKLIExEMBfvNY4ovyRa1xvW+MXluVyE= # =bF2U # -----END PGP SIGNATURE----- # gpg: Signature made Tue 22 Nov 2022 05:22:06 EST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: virtio: disable error for out of spec queue-enable acpi/tests/avocado/bits: keep the work directory when BITS_DEBUG is set in env tests/avocado: configure acpi-bits to use avocado timeout MAINTAINERS: add mst to list of biosbits maintainers tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope acpi: x86: move RPQx field back to _SB scope tests: acpi: whitelist DSDT before moving PRQx to _SB scope vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devices Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-11-22vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devicesStefano Garzarella
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support") enabled VIRTIO_F_RING_RESET by default for all virtio devices. This feature is not currently emulated by QEMU, so for vhost and vhost-user devices we need to make sure it is supported by the offloaded device emulation (in-kernel or in another process). To do this we need to add VIRTIO_F_RING_RESET to the features bitmap passed to vhost_get_features(). This way it will be masked if the device does not support it. This issue was initially discovered with vhost-vsock and vhost-user-vsock, and then also tested with vhost-user-rng which confirmed the same issue. They fail when sending features through VHOST_SET_FEATURES ioctl or VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated by the guest (Linux >= v6.0), but not supported by the device. Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318 Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20221121101101.29400-1-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-11-21rtl8139: honor large send MSS valueStefan Hajnoczi
The Large-Send Task Offload Tx Descriptor (9.2.1 Transmit) has a Large-Send MSS value where the driver specifies the MSS. See the datasheet here: http://realtek.info/pdf/rtl8139cp.pdf The code ignores this value and uses a hardcoded MSS of 1500 bytes instead. When the MTU is less than 1500 bytes the hardcoded value results in IP fragmentation and poor performance. Use the Large-Send MSS value to correctly size Large-Send packets. Jason Wang <jasowang@redhat.com> noticed that the Large-Send MSS value mask was incorrect so it is adjusted to match the datasheet and Linux 8139cp driver. This issue was discussed in the past here: https://lore.kernel.org/all/20161114162505.GD26664@stefanha-x1.localdomain/ Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk> Reported-by: Tobias Fiebig <tobias+git@fiebig.nl> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1312 Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221117165554.1773409-4-stefanha@redhat.com>
2022-11-21rtl8139: keep Tx command mode 0 and 1 separateStefan Hajnoczi
There are two Tx Descriptor formats called mode 0 and mode 1. The mode is determined by the Large Send bit. CP_TX_IPCS (bit 18) is defined in mode 1 but the code checks the bit unconditionally. In mode 0 bit 18 is part of the Large Send MSS value. Explicitly check the Large Send bit to distinguish Tx command modes. This avoids bugs where modes are confused. Note that I didn't find any actual bugs aside from needlessly computing the IP checksum when the Large Send bit is enabled. Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221117165554.1773409-3-stefanha@redhat.com>
2022-11-21rtl8139: avoid clobbering tx descriptor bitsStefan Hajnoczi
The device turns the Tx Descriptor into a Tx Status descriptor after fully reading the descriptor. This involves clearing Tx Own (bit 31) to indicate that the driver has ownership of the descriptor again as well as several other bits. The code keeps the first dword of the Tx Descriptor in the txdw0 local variable. txdw0 is reused to build the first word of the Tx Status descriptor. Later on the code uses txdw0 again, incorrectly assuming that it still contains the first dword of the Tx Descriptor. The tx offloading code misbehaves because it sees bogus bits in txdw0. Use a separate local variable for Tx Status and preserve Tx Descriptor in txdw0. Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221117165554.1773409-2-stefanha@redhat.com>
2022-11-11Merge tag 'pull-request-2022-11-11' of https://gitlab.com/thuth/qemu into ↵Stefan Hajnoczi
staging * Fix "unused variable" warnings from Clang 15 * Allow building of guest-agent without emulators or tools * White space clean-ups * Fixes for typos in the documentation # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNuI5YRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbXfjRAAsUf7C77pVZj5VWpAVYSgHdYJ5WCfVQg3 # Nd4Yixyx8b6yhgY1Vv9OL/uuY04AAWifQn0AUnNBJKrOKcuvU3mHlE/s1imw9CUf # tsX2gE1GAczQqp5dLL2/+FCMZOC/acFkjmA9LAdOfG7eKzodRdsq/ZaIXd2+MmfM # nG972Zw0/ZJqQs+DtjwNYvgtywEmRqunKIaCaSwtGHWvot081yw1iW3PvgrKulEr # v9SQhAurD+ZxcJSeTn3c8L//KYVyCUGQ0K/1cbBcyhPi7xMQar8j7xuCk7xZiOMW # fvhCOSnjbntsf+xnE2VDlakKQvoY6r30Tl0dzSoH79uzGe+ZTPC+L6ly3tzJ0Vo6 # aslppY+8oYxLbJRX1Im8X0rxK6OqcVjjEXu3fVn8/C1WftIltuy3va2LZNZfQ8Bf # +Yte3swzvFzgQE19c0HkgMd4uvfqGIkyprs1n2RjzZaI7cnQ4Ati/wQsOKCUrqrY # VYsy3J1IypM7DO/cZ/JpdDV3PPTWv8JI8H2Agn2VhvY86N9ETn71RAj6UYqufW3W # H3lMv7L6rU8c1tfcjbr0Xf811EwHekkIjyGt0aJ8MacJNkSc1A4pe+UUGVxNefue # W0kT2htHQL1Q9JWjbKQuqT/rYrKUfqRDnd809YAzEVO7jpabS8g/hN3wBiaeZDgK # LqLnITUBhRU= # =H8p7 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 11 Nov 2022 05:27:34 EST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2022-11-11' of https://gitlab.com/thuth/qemu: Fix several typos in documentation (found by codespell) net: Replace TAB indentations with spaces qga: Allow building of the guest agent without system emulators or tools libdecnumber/dpd/decimal64: Fix compiler warning from Clang 15 host-libusb: Remove unused variable qemu-img: remove unused variable tulip: Remove unused variable rtl8139: Remove unused variable Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-11-11net: Replace TAB indentations with spacesAhmed Abouzied
Replaces TABs with spaces, making sure to have a consistent coding style of 4 space indentations in the net subsystem. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/377 Signed-off-by: Ahmed Abouzied <email@aabouzied.com> Message-Id: <20210614183849.20622-1-email@aabouzied.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: Fixed mis-aligned indentation in some of the files] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-11tulip: Remove unused variableMiroslav Rezanina
Variable n used in tulip_idblock_crc function is only incremented but never read. This causes 'Unused but set variable' warning on Clang 15.0.1 compiler. Removing the variable to prevent the warning. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <02e1560d115c208df32236df8916fed98429fda1.1668009030.git.mrezanin@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-11rtl8139: Remove unused variableMiroslav Rezanina
Variable send_count used in rtl8139_cplus_transmit_one function is only incremented but never read. This causes 'Unused but set variable' warning on Clang 15.0.1 compiler. Removing the variable to prevent the warning. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <15a32dd06c492216cbf27cd3ddcbe1e9afb8d8f5.1668009030.git.mrezanin@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-10virtio-net: fix for heap-buffer-overflowXuan Zhuo
Run shell script: cat << EOF | valgrind qemu-system-i386 -display none -machine accel=qtest, -m \ 512M -M q35 -nodefaults -device virtio-net,netdev=net0 -netdev \ user,id=net0 -qtest stdio outl 0xcf8 0x80000810 outl 0xcfc 0xc000 outl 0xcf8 0x80000804 outl 0xcfc 0x01 outl 0xc00d 0x0200 outl 0xcf8 0x80000890 outb 0xcfc 0x4 outl 0xcf8 0x80000889 outl 0xcfc 0x1c000000 outl 0xcf8 0x80000893 outw 0xcfc 0x100 EOF Got: ==68666== Invalid read of size 8 ==68666== at 0x688536: virtio_net_queue_enable (virtio-net.c:575) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6E31AE: memory_region_write_accessor (memory.c:492) ==68666== by 0x6E098D: access_with_adjusted_size (memory.c:554) ==68666== by 0x6E4DB3: memory_region_dispatch_write (memory.c:1521) ==68666== by 0x6EBCD3: flatview_write_continue (physmem.c:2820) ==68666== by 0x6EBFBF: flatview_write (physmem.c:2862) ==68666== by 0x6EF5E7: address_space_write (physmem.c:2958) ==68666== by 0x6DFDEC: cpu_outw (ioport.c:70) ==68666== by 0x6F6DF0: qtest_process_command (qtest.c:480) ==68666== Address 0x29087fe8 is 24 bytes after a block of size 416 in arena "client" That is reported by Alexander Bulekov. https://gitlab.com/qemu-project/qemu/-/issues/1309 Here, the queue_index is the index of the cvq, but in some cases cvq does not have the corresponding NetClientState, so overflow appears. I add a check here, ignore illegal queue_index and cvq queue_index. Note the queue_index is below the VIRTIO_QUEUE_MAX but greater or equal than cvq index could hit this. Other devices are similar. Fixes: 7f863302 ("virtio-net: support queue_enable") Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1309 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20221110095739.130393-1-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07vhost: Change the sequence of device startYajun Wu
This patch is part of adding vhost-user vhost_dev_start support. The motivation is to improve backend configuration speed and reduce live migration VM downtime. Moving the device start routines after finishing all the necessary device and VQ configuration, further aligning to the virtio specification for "device initialization sequence". Following patch will add vhost-user vhost_dev_start support. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com> Message-Id: <20221017064452.1226514-2-yajunw@nvidia.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07msix: Assert that specified vector is in rangeAkihiko Odaki
There were several different ways to deal with the situation where the vector specified for a msix function is out of bound: - early return a function and keep progresssing - propagate the error to the caller - mark msix unusable - assert it is in bound - just ignore An out-of-bound vector should not be specified if the device implementation is correct so let msix functions always assert that the specified vector is in range. An exceptional case is virtio-pci, which allows the guest to configure vectors. For virtio-pci, it is more appropriate to introduce its own checks because it is sometimes too late to check the vector range in msix functions. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20220829083524.143640-1-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Akihiko Odaki &lt;<a href="mailto:akihiko.odaki@daynix.com" target="_blank">akihiko.odaki@daynix.com</a>&gt;<br>
2022-11-07virtio-net: enable vq reset featureXuan Zhuo
Add virtqueue reset feature for virtio-net Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Message-Id: <20221017092558.111082-16-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07vhost: vhost-kernel: enable vq reset featureKangjie Xu
Add virtqueue reset feature for vhost-kernel. Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-15-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07virtio-net: support queue_enableKangjie Xu
Support queue_enable in vhost-kernel scenario. It can be called when a vq reset operation has been performed and the vq is restared. It should be noted that we can restart the vq when the vhost has already started. When launching a new vhost device, the vhost is not started and all vqs are not initalized until VIRTIO_PCI_COMMON_STATUS is written. Thus, we should use vhost_started to differentiate the two cases: vq reset and device start. Currently it only supports vhost-kernel. Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-14-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07virtio-net: support queue resetXuan Zhuo
virtio-net and vhost-kernel implement queue reset. Queued packets in the corresponding queue pair are flushed or purged. For virtio-net, userspace datapath will be disabled later in __virtio_queue_reset(). It will set addr of vring to 0 and idx to 0. Thus, virtio_net_receive() and virtio_net_flush_tx() will not receive or send packets. For vhost-net, the datapath will be disabled in vhost_net_virtqueue_reset(). Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-13-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07virtio-net: introduce flush_or_purge_queued_packets()Kangjie Xu
Introduce the fucntion flush_or_purge_queued_packets(), it will be used in device reset and virtqueue reset. Therefore, we extract the common logic as a new function. Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-12-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07vhost-net: vhost-kernel: introduce vhost_net_virtqueue_restart()Kangjie Xu
Introduce vhost_net_virtqueue_restart(), which can restart the specific virtqueue when the vhost net started running before. If it fails to restart the virtqueue, the device will be stopped. Here we do not reuse vhost_net_start_one() or vhost_dev_start() because they work at queue pair level. The mem table and features do not change, so we can call the vhost_virtqueue_start() to restart a specific queue. This patch only considers the case of vhost-kernel, when NetClientDriver is NET_CLIENT_DRIVER_TAP. Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-11-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-07vhost-net: vhost-kernel: introduce vhost_net_virtqueue_reset()Kangjie Xu
Introduce vhost_virtqueue_reset(), which can reset the specific virtqueue in the device. Then it will unmap vrings and the desc of the virtqueue. Here we do not reuse the vhost_net_stop_one() or vhost_dev_stop(), because they work at queue pair level. We do not use vhost_virtqueue_stop() because it may stop the device in the backend. This patch only considers the case of vhost-kernel, when NetClientDriver is NET_CLIENT_DRIVER_TAP. Furthermore, we do not need net->nc->info->poll() because it enables userspace datapath and we want to stop all datapaths for this reset virtqueue here. Signed-off-by: Kangjie Xu <kangjie.xu@linux.alibaba.com> Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20221017092558.111082-10-xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-31Merge tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu into ↵Stefan Hajnoczi
staging * Fix and test the VISTR instruction on s390x * Some more small s390x fixes and maintainer updates * Make sure to remove all temporary files from qtests * OpenBSD VM test update to version 7.2 * Add sndio to FreeBSD tests * More patches to enable the qtests on Windows # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT # azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t # sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55 # wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ # SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY # 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w # JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp # N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/ # 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+ # 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys # hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq # VWFb+/yMvaE= # =h0Ep # -----END PGP SIGNATURE----- # gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits) tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32 tests/qtest: libqos: Do not build virtio-9p unconditionally tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled tests/qtest: libqtest: Introduce qtest_wait_qemu() tests/qtest: Use EXIT_FAILURE instead of magic number tests/qtest: device-plug-test: Reverse the usage of double/single quotes tests/qtest: Support libqtest to build and run on Windows tests/qtest: Use send/recv for socket communication accel/qtest: Support qtest accelerator for Windows tests: Add sndio to the FreeBSD CI containers / VM tests/vm: update openbsd to release 7.2 tests/qtest/libqos/e1000e: Use e1000_regs.h tests/qtest/cxl-test: Remove temporary directories after testing tests/qtest/tpm: Clean up remainders of swtpm MAINTAINERS: target/s390x/: add Ilya as reviewer tests/tcg/s390x: Add a test for the vistr instruction target/s390x: Fix emulation of the VISTR instruction tests/tcg/s390x: Test compiler flags only once, not every time s390x/tod-kvm: don't save/restore the TOD in PV guests s390x: step down as general arch maintainer ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-28tests/qtest/libqos/e1000e: Use e1000_regs.hAkihiko Odaki
The register definitions in tests/qtest/libqos/e1000e.c had names different from hw/net/e1000_regs.h, which made it hard to understand what test codes corresponds to the implementation. Use hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove these duplications. E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings because hw/net/e1000_regs.h does not have the definition and it is for TCP segmentation offload, which does not matter for the implemented tests. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-Id: <20221013055245.28102-1-akihiko.odaki@daynix.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-28net: introduce qemu_set_info_str() functionLaurent Vivier
Embed the setting of info_str in a function. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28virtio-net: fix TX timer with tx_burstLaurent Vivier
When virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and nothing restart the timer. Fix that by doing for TX timer as we do for bottom half TX: rearming the timer if we find any packet to send during the virtio_net_flush_tx() call. Fixes: e3f30488e5f8 ("virtio-net: Limit number of packets sent per TX flush") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28virtio-net: fix bottom-half packet TX on asynchronous completionLaurent Vivier
When virtio-net is used with the socket netdev backend, the backend can be busy and not able to collect new packets. In this case, net_socket_receive() returns 0 and registers a poll function to detect when the socket is ready again. In virtio_net_tx_bh(), virtio_net_flush_tx() forwards the 0, the virtio notifications are disabled and the function is not re-scheduled, waiting for the backend to be ready. When the socket netdev backend is again able to send packets, the poll function re-starts to flush remaining packets. This is done by calling virtio_net_tx_complete(). It re-enables notifications and calls again virtio_net_flush_tx(). But it seems if virtio_net_flush_tx() reaches the tx_burst value all the queue is not flushed and no new notification is sent to re-schedule virtio_net_tx_bh(). Nothing re-start to flush the queue and remaining packets are stuck in the queue. To fix that, detect in virtio_net_tx_complete() if virtio_net_flush_tx() has been stopped by tx_burst and if yes re-schedule the bottom half function virtio_net_tx_bh() to flush the remaining packets. This is what is done in virtio_net_tx_bh() when the virtio_net_flush_tx() is synchronous, and completly by-passed when the operation needs to be asynchronous. Fixes: a697a334b3c4 ("virtio-net: Introduce a new bottom half packet TX") Cc: alex.williamson@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-24treewide: Remove the unnecessary space before semicolonBin Meng
%s/return ;/return; Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Message-Id: <20221024072802.457832-1-bmeng@tinylab.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-10-07virtio: introduce VirtIOConfigSizeParams & virtio_get_config_sizeDaniil Tatianin
This is the first step towards moving all device config size calculation logic into the virtio core code. In particular, this adds a struct that contains all the necessary information for common virtio code to be able to calculate the final config size for a device. This is expected to be used with the new virtio_get_config_size helper, which calculates the final length based on the provided host features. This builds on top of already existing code like VirtIOFeature and virtio_feature_get_config_size(), but adds additional fields, as well as sanity checking so that device-specifc code doesn't have to duplicate it. An example usage would be: static const VirtIOFeature dev_features[] = { {.flags = 1ULL << FEATURE_1_BIT, .end = endof(struct virtio_dev_config, feature_1)}, {.flags = 1ULL << FEATURE_2_BIT, .end = endof(struct virtio_dev_config, feature_2)}, {} }; static const VirtIOConfigSizeParams dev_cfg_size_params = { .min_size = DEV_BASE_CONFIG_SIZE, .max_size = sizeof(struct virtio_dev_config), .feature_sizes = dev_features }; // code inside my_dev_device_realize() size_t config_size = virtio_get_config_size(&dev_cfg_size_params, host_features); virtio_init(vdev, VIRTIO_ID_MYDEV, config_size); Currently every device is expected to write its own boilerplate from the example above in device_realize(), however, the next step of this transition is moving VirtIOConfigSizeParams into VirtioDeviceClass, so that it can be done automatically by the virtio initialization code. All of the users of virtio_feature_get_config_size have been converted to use virtio_get_config_size so it's no longer needed and is removed with this commit. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Message-Id: <20220906073111.353245-2-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-09-27virtio-net: Update virtio-net curr_queue_pairs in vdpa backendsEugenio Pérez
It was returned as error before. Instead of it, simply update the corresponding field so qemu can send it in the migration data. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-09-27e1000e: set RX desc status with DD flag in a separate operationDing Hui
Like commit 034d00d48581 ("e1000: set RX descriptor status in a separate operation"), there is also same issue in e1000e, which would cause lost packets or stop sending packets to VM with DPDK. Do similar fix in e1000e. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/402 Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-09-22hw/net/e1000e_core: Use definition to avoid dynamic stack allocationPhilippe Mathieu-Daudé
The compiler isn't clever enough to figure 'min_buf_size' is a constant, so help it by using a definitions instead. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 01:12:41 +0000