aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)Author
2020-01-30ftgmac100: check RX and TX buffer alignmentCédric Le Goater
These buffers should be aligned on 16 bytes. Ignore invalid RX and TX buffer addresses and log an error. All incoming and outgoing traffic will be dropped because no valid RX or TX descriptors will be available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-27hppa: Add support for LASI chip with i82596 NICHelge Deller
LASI is a built-in multi-I/O chip which supports serial, parallel, network (Intel i82596 Apricot), sound and other functionalities. LASI has been used in many HP PARISC machines. This patch adds the necessary parts to allow Linux and HP-UX to detect LASI and the network card. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191220211512.3289-3-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24hw/net/imx_fec: Remove unuseful FALLTHROUGH commentsPhilippe Mathieu-Daudé
We don't need to explicit these obvious switch fall through comments. Stay consistent with the rest of the codebase. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191218192526.13845-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24hw/net/imx_fec: Rewrite fall through commentsPhilippe Mathieu-Daudé
GCC9 is confused by this comment when building with CFLAG -Wimplicit-fallthrough=2: hw/net/imx_fec.c: In function ‘imx_eth_write’: hw/net/imx_fec.c:906:12: error: this statement may fall through [-Werror=implicit-fallthrough=] 906 | if (unlikely(single_tx_ring)) { | ^ hw/net/imx_fec.c:912:5: note: here 912 | case ENET_TDAR: /* FALLTHROUGH */ | ^~~~ cc1: all warnings being treated as errors Rewrite the comments in the correct place, using 'fall through' which is recognized by GCC and static analyzers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20191218192526.13845-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-20migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Compat machines fix (Denis) * Command line parsing fixes (Michal, Peter, Xiaoyao) * Cooperlake CPU model fixes (Xiaoyao) * i386 gdb fix (mkdolata) * IOEventHandler cleanup (Philippe) * icount fix (Pavel) * RR support for random number sources (Pavel) * Kconfig fixes (Philippe) # gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (38 commits) chardev: Use QEMUChrEvent enum in IOEventHandler typedef chardev: use QEMUChrEvent instead of int chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler hw/ipmi: Remove unnecessary declarations target/i386: Add missed features to Cooperlake CPU model target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub hw/rtc/mc146818: Add missing dependency on ISA Bus hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' ↵Peter Maydell
into staging Clean-ups: qom-ify serial and remove QDEV_PROP_PTR Hi, QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove me". In most cases, it can be easily replaced with QDEV_PROP_LINK when the pointer points to an Object. There are a few places where such substitution isn't possible. For those places, it seems reasonable to use a specific setter method instead, and keep the user_creatable = false. In other places, proper usage of qdev or other facilies is the solution. The serial code wasn't converted to qdev, which makes it a bit more archaic to deal with. Let's convert it first, so we can more easily embed it from other devices, and re-export some properties and drop QDEV_PROP_PTR usage. # gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/prop-ptr-pull-request: (37 commits) qdev/qom: remove some TODO limitations now that PROP_PTR is gone qdev: remove QDEV_PROP_PTR qdev: remove PROP_MEMORY_REGION omap-gpio: remove PROP_PTR omap-i2c: remove PROP_PTR omap-intc: remove PROP_PTR smbus-eeprom: remove PROP_PTR cris: improve passing PIC interrupt vector to the CPU mips/cps: fix setting saar property qdev: use g_strcmp0() instead of open-coding it leon3: use qdev gpio facilities for the PIL leon3: use qemu_irq framework instead of callback as property dp8393x: replace PROP_PTR with PROP_LINK etraxfs: remove PROP_PTR usage lance: replace PROP_PTR with PROP_LINK vmmouse: replace PROP_PTR with PROP_LINK sm501: make SerialMM a child, export chardev property mips: use sysbus_mmio_get_region() instead of internal fields mips: use sysbus_add_io() mips: baudbase is 115200 by default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci, pc: fixes, features Bugfixes all over the place. HMAT support. New flags for vhost-user-blk utility. Auto-tuning of seg max for virtio storage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 06 Jan 2020 17:05:05 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (32 commits) intel_iommu: add present bit check for pasid table entries intel_iommu: a fix to vtd_find_as_from_bus_num() virtio-net: delete also control queue when TX/RX deleted virtio: reset region cache when on queue deletion virtio-mmio: update queue size on guest write tests: add virtio-scsi and virtio-blk seg_max_adjust test virtio: make seg_max virtqueue size dependent hw: fix using 4.2 compat in 5.0 machine types for i440fx/q35 vhost-user-scsi: reset the device if supported vhost-user: add VHOST_USER_RESET_DEVICE to reset devices hw/pci/pci_host: Let pci_data_[read/write] use unsigned 'size' argument hw/pci/pci_host: Remove redundant PCI_DPRINTF() virtio-mmio: Clear v2 transport state on soft reset ACPI: add expected files for HMAT tests (acpihmat) tests/bios-tables-test: add test cases for ACPI HMAT tests/numa: Add case for QMP build HMAT hmat acpi: Build Memory Side Cache Information Structure(s) hmat acpi: Build System Locality Latency and Bandwidth Information Structure(s) hmat acpi: Build Memory Proximity Domain Attributes Structure(s) numa: Extend CLI to provide memory side cache information ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07dp8393x: replace PROP_PTR with PROP_LINKMarc-André Lureau
Link property is the correct way to pass a MemoryRegion to a device for DMA purposes. Sidenote: as a sysbus device, this remains non-usercreatable even though we can drop the specific flag here. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Laurent Vivier <laurent@vivier.eu>
2020-01-07etraxfs: remove PROP_PTR usageMarc-André Lureau
etraxfs_dma_client are not Object, so can't be exposed to user with QOM path. Let's remove property usage and move the constructor to the .c unit, simplifying some code on the way. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07lance: replace PROP_PTR with PROP_LINKMarc-André Lureau
The device remains non-user creatable since it is a sysbus device. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-07hw/nvram/Kconfig: Add an entry for the NMC93xx EEPROMPhilippe Mathieu-Daudé
The NMC93xx EEPROM is only used by few NIC cards and the Am53C974 SCSI controller. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191231183216.6781-13-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-06virtio-net: delete also control queue when TX/RX deletedYuri Benditovich
https://bugzilla.redhat.com/show_bug.cgi?id=1708480 If the control queue is not deleted together with TX/RX, it later will be ignored in freeing cache resources and hot unplug will not be completed. Cc: qemu-stable@nongnu.org Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Message-Id: <20191226043649.14481-3-yuri.benditovich@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-06vmstate: replace DeviceState with VMStateIfMarc-André Lureau
Replace DeviceState dependency with VMStateIf on vmstate API. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com>
2019-12-18qemu_log_lock/unlock now preserves the qemu_logfile handle.Robert Foley
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a handle to unlock. This allows for changing the handle during logging and ensures the lock() and unlock() are for the same file. Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock() calls (and the log("\n")), since the translator can longjmp out of the loop if it attempts to translate an instruction in an inaccessible page. Signed-off-by: Robert Foley <robert.foley@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
2019-12-16Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-dec-16-2019' ↵Peter Maydell
into staging MIPS queue for December 16th, 2019 # gpg: Signature made Mon 16 Dec 2019 12:29:24 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full] # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-dec-16-2019: MAINTAINERS: Add a file to MIPS section MAINTAINERS: Add three files to Malta section MAINTAINERS: Adjust maintainership for Malta board MAINTAINERS: Adjust maintainership for Fulong 2E board MAINTAINERS: Add a section on UI translation hw/mips: Deprecate the r4k machine mips: fulong 2e: Renovate coding style mips: r4000: Renovate coding style mips: mipssim: Renovate coding style mips: malta: Renovate coding style mips: jazz: Renovate coding style Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16mips: mipssim: Renovate coding styleFilip Bozuta
The script checkpatch.pl located in scripts folder was used to detect all errors and warrnings in files: hw/mips/mips_mipssim.c hw/net/mipsnet.c All these mips mipssim machine files were edited and all the errors and warrings generated by the checkpatch.pl script were corrected and then the script was ran again to make sure there are no more errors and warnings. Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1575640687-20744-4-git-send-email-Filip.Bozuta@rt-rk.com>
2019-12-16aspeed: Change the "nic" property definitionCédric Le Goater
The Aspeed MII model has a link pointing to its associated FTGMAC100 NIC in the machine. Change the "nic" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-02net/virtio: Fix failover error handling crash bugsMarkus Armbruster
Functions that take an Error ** parameter to pass an error to the caller expect the parameter to point to null. failover_replug_primary() violates this precondition in several places: * After qemu_opts_from_qdict() failed, *errp is no longer null. Passing it to error_setg() is wrong, and will trip the assertion in error_setv(). Messed up in commit 150ab54aa6 "net/virtio: fix re-plugging of primary device". Simply drop the error_setg(). * Passing @errp to qemu_opt_set_bool(), hotplug_handler_pre_plug(), and hotplug_handler_plug() is wrong. If one of the first two fails, *errp is no longer null. Risks tripping the same assertion. Moreover, continuing after such errors is unsafe. Messed up in commit 9711cd0dfc "net/virtio: add failover support". Fix by handling each error properly. failover_replug_primary() crashes when passed a null @errp. Also messed up in commit 9711cd0dfc. This bug can't bite as no caller actually passes null. Fix it anyway. Fixes: 9711cd0dfc3fa414f7f64935713c07134ae67971 Fixes: 150ab54aa6934583180f88a2bd540bc6fc4fbff3 Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191130194240.10517-3-armbru@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
2019-12-02net/virtio: Drop useless n->primary_dev not null checksMarkus Armbruster
virtio_net_handle_migration_primary() returns early when it can't ensure n->primary_dev is non-null. Checking it again right after that early return is redundant. Drop. If n->primary_dev is null on entering failover_replug_primary(), @pdev will become null, and pdev->partially_hotplugged will crash. Checking n->primary_dev later is useless. It can't actually be null, because its caller virtio_net_handle_migration_primary() ensures it isn't. Drop the useless check. Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20191130194240.10517-2-armbru@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
2019-11-25net/virtio: return error when device_opts arg is NULLJens Freimann
This fixes CID 1407222. Fixes: 9711cd0dfc3f ("net/virtio: add failover support") Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-11-25net/virtio: fix re-plugging of primary deviceJens Freimann
failover_replug_primary was returning true on failure which lead to re-plug not working when a migration failed. Fix this by returning success when hotplug worked. This is a bug that was missed in last round of testing but was tested succesfully with this version. Also make sure we don't pass NULL to qdev_set_parent_bus(). This fixes CID 1407224. Fixes: 9711cd0dfc3f ("net/virtio: add failover support") Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-11-25net/virtio: return early when failover primary alread addedJens Freimann
Bail out when primary device was already added before. This avoids printing a wrong warning message during reboot. Fixes: 9711cd0dfc3f ("net/virtio: add failover support") Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-11-25net/virtio: fix dev_unplug_pendingJens Freimann
.dev_unplug_pending is set up by virtio-net code indepent of failover support was set for the device or not. This gives a wrong result when we check for existing primary devices in migration code. Fix this by actually calling dev_unplug_pending() instead of just checking if the function pointer was set. When the feature was not negotiated dev_unplug_pending() will always return false. This prevents us from going into the wait-unplug state when there's no primary device present. Fixes: 9711cd0dfc3f ("net/virtio: add failover support") Signed-off-by: Jens Freimann <jfreimann@redhat.com> Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-11-19net/cadence_gem: Set PHY autonegotiation restart statusLinus Ziegert
The Linux kernel PHY driver sets AN_RESTART in the BMCR of the PHY when autonegotiation is started. Recently the kernel started to read back the PHY's AN_RESTART bit and now checks whether the autonegotiation is complete and the bit was cleared [1]. Otherwise the link status is down. The emulated PHY needs to clear AN_RESTART immediately to inform the kernel driver about the completion of autonegotiation phase. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c36757eb9dee Signed-off-by: Linus Ziegert <linus.ziegert+qemu@holoplot.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191104181604.21943-1-linus.ziegert+qemu@holoplot.com Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-08dp8393x: fix dp8393x_receive()Laurent Vivier
RXpkt.in_use is always 16 bit wide, but when the bus access mode is 32bit and the endianness is big, we must access the second word and not the first. This patch adjusts the offset according to the size and endianness. This fixes DHCP for Q800 guest. Fixes: be9208419865 ("dp8393x: manage big endian bus") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191106112341.23735-3-laurent@vivier.eu>
2019-11-08dp8393x: put the DMA buffer in the state structureLaurent Vivier
Move it from the stack. It's only 24 bytes, and this simplifies the dp8393x_get()/ dp8393x_put() interface. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191106112341.23735-2-laurent@vivier.eu>
2019-10-29virtio_net: use RCU_READ_LOCK_GUARDDr. David Alan Gilbert
Use RCU_READ_LOCK_GUARD rather than the manual rcu_read_(un)lock call. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191025103403.120616-3-dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29net/virtio: add failover supportJens Freimann
This patch adds support to handle failover device pairs of a virtio-net device and a (vfio-)pci device, where the virtio-net acts as the standby device and the (vfio-)pci device as the primary. The general idea is that we have a pair of devices, a (vfio-)pci and a emulated (virtio-net) device. Before migration the vfio device is unplugged and data flows to the emulated device, on the target side another (vfio-)pci device is plugged in to take over the data-path. In the guest the net_failover module will pair net devices with the same MAC address. To achieve this we need: 1. Provide a callback function for the should_be_hidden DeviceListener. It is called when the primary device is plugged in. Evaluate the QOpt passed in to check if it is the matching primary device. It returns if the device should be hidden or not. When it should be hidden it stores the device options in the VirtioNet struct and the device is added once the VIRTIO_NET_F_STANDBY feature is negotiated during virtio feature negotiation. If the virtio-net devices are not realized at the time the (vfio-)pci devices are realized, we need to connect the devices later. This way we make sure primary and standby devices can be specified in any order. 2. Register a callback for migration status notifier. When called it will unplug its primary device before the migration happens. 3. Register a callback for the migration code that checks if a device needs to be unplugged from the guest. Signed-off-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191029114905.6856-11-jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 29 Oct 2019 02:33:36 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: COLO-compare: Fix incorrect `if` logic virtio-net: prevent offloads reset on migration virtio: new post_load hook net: add tulip (dec21143) driver Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29Merge remote-tracking branch 'remotes/vivier/tags/q800-branch-pull-request' ↵Peter Maydell
into staging Add Macintosh Quadra 800 machine in hw/m68k # gpg: Signature made Mon 28 Oct 2019 18:14:25 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-branch-pull-request: BootLinuxConsoleTest: Test the Quadra 800 hw/m68k: define Macintosh Quadra 800 hw/m68k: add a dummy SWIM floppy controller hw/m68k: add Nubus macfb video card hw/m68k: add Nubus support hw/m68k: implement ADB bus support for via hw/m68k: add VIA support dp8393x: manage big endian bus esp: add pseudo-DMA as used by Macintosh esp: move get_cmd() post-DMA code to get_cmd_cb() esp: move handle_ti_cmd() cleanup code to esp_do_dma(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-29virtio-net: prevent offloads reset on migrationMikhail Sennikovsky
Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-29net: add tulip (dec21143) driverSven Schnelle
This adds the basic functionality to emulate a Tulip NIC. Implemented are: - RX and TX functionality - Perfect Frame Filtering - Big/Little Endian descriptor support - 93C46 EEPROM support - LXT970 PHY Not implemented, mostly because i had no OS using these functions: - Imperfect frame filtering - General Purpose Timer - Transmit automatic polling - Boot ROM support - SIA interface - Big/Little Endian data buffer conversion Successfully tested with the following Operating Systems: - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers - HPPA Linux - Windows XP - HP-UX Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191022155413.4619-1-svens@stackframe.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-10-28dp8393x: manage big endian busLaurent Vivier
This is needed by Quadra 800, this card can run on little-endian or big-endian bus. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20191026164546.30020-5-laurent@vivier.eu>
2019-10-28Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' ↵Peter Maydell
into staging Block patches for softfreeze: - iotest patches - Improve performance of the mirror block job in write-blocking mode - Limit memory usage for the backup block job - Add discard and write-zeroes support to the NVMe host block driver - Fix a bug in the mirror job - Prevent the qcow2 driver from creating technically non-compliant qcow2 v3 images (where there is not enough extra data for snapshot table entries) - Allow callers of bdrv_truncate() (etc.) to determine whether the file must be resized to the exact given size or whether it is OK for block devices not to shrink # gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits) qemu-iotests: restrict 264 to qcow2 only Revert "qemu-img: Check post-truncation size" block: Pass truncate exact=true where reasonable block: Let format drivers pass @exact block: Evaluate @exact in protocol drivers block: Add @exact parameter to bdrv_co_truncate() block: Do not truncate file node when formatting block/cor: Drop cor_co_truncate() block: Handle filter truncation like native impl. iotests: Test qcow2's snapshot table handling iotests: Add peek_file* functions qcow2: Fix v3 snapshot table entry compliancy qcow2: Repair snapshot table with too many entries qcow2: Fix overly long snapshot tables qcow2: Keep track of the snapshot table length qcow2: Fix broken snapshot table entries qcow2: Add qcow2_check_fix_snapshot_table() qcow2: Separate qcow2_check_read_snapshot_table() qcow2: Write v3-compliant snapshot list on upgrade qcow2: Put qcow2_upgrade() into its own function ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: features, tests libqos update with support for virtio 1. Packed ring support for virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 25 Oct 2019 12:47:59 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio: drop unused virtio_device_stop_ioeventfd() function libqos: add VIRTIO PCI 1.0 support libqos: extract Legacy virtio-pci.c code libqos: make the virtio-pci BAR index configurable libqos: expose common virtqueue setup/cleanup functions libqos: add MSI-X callbacks to QVirtioPCIDevice libqos: pass full QVirtQueue to set_queue_address() libqos: add iteration support to qpci_find_capability() libqos: access VIRTIO 1.0 vring in little-endian libqos: implement VIRTIO 1.0 FEATURES_OK step libqos: enforce Device Initialization order libqos: add missing virtio-9p feature negotiation tests/virtio-blk-test: set up virtqueue after feature negotiation virtio-scsi-test: add missing feature negotiation libqos: extend feature bits to 64-bit libqos: read QVIRTIO_MMIO_VERSION register tests/virtio-blk-test: read config space after feature negotiation virtio: add property to enable packed virtqueue vhost_net: enable packed ring support virtio: event suppression support for packed ring ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-28include: Move endof() up from hw/virtio/virtio.hMax Reitz
endof() is a useful macro, we can make use of it outside of virtio. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-25vhost_net: enable packed ring supportJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Message-Id: <20191025083527.30803-8-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-24hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the fsl_etsec code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed: add support for the Aspeed MII controller of the AST2600Cédric Le Goater
The AST2600 SoC has an extra controller to set the PHY registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-23-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw/net/lan9118.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the cmsdk-apb-watchdog code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-22-peter.maydell@linaro.org
2019-10-15ptimer: Rename ptimer_init() to ptimer_init_with_bh()Peter Maydell
Currently the ptimer design uses a QEMU bottom-half as its mechanism for calling back into the device model using the ptimer when the timer has expired. Unfortunately this design is fatally flawed, because it means that there is a lag between the ptimer updating its own state and the device callback function updating device state, and guest accesses to device registers between the two can return inconsistent device state. We want to replace the bottom-half design with one where the guest device's callback is called either immediately (when the ptimer triggers by timeout) or when the device model code closes a transaction-begin/end section (when the ptimer triggers because the device model changed the ptimer's count value or other state). As the first step, rename ptimer_init() to ptimer_init_with_bh(), to free up the ptimer_init() name for the new API. We can then convert all the ptimer users away from ptimer_init_with_bh() before removing it entirely. (Commit created with git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/' and three overlong lines folded by hand.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
2019-10-04spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helperDavid Gibson
Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with the result, so we might as well just fold that into the helper. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-09-12hw/net/vmxnet3: Fix leftover unregister_savevmDr. David Alan Gilbert
Commit 78dd48df3 reworked vmxnet3's live migration but left a straggling unregister_savevm call. Remove it, although it doesn't seem to have any bad effect. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190822111218.12079-1-dgilbert@redhat.com> Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-09-03hw/net/xilinx_axi: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190823143249.8096-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21hw/net/e1000: Fix erroneous commentPhilippe Mathieu-Daudé
Missed during the QOM convertion in 9af21dbee14. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190715102210.31365-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-16Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190816' into staging target-arm queue: * target/arm: generate a custom MIDR for -cpu max * hw/misc/zynq_slcr: refactor to use standard register definition * Set ENET_BD_BDU in I.MX FEC controller * target/arm: Fix routing of singlestep exceptions * refactor a32/t32 decoder handling of PC * minor optimisations/cleanups of some a32/t32 codegen * target/arm/cpu64: Ensure kvm really supports aarch64=off * target/arm/cpu: Ensure we can use the pmu with kvm * target/arm: Minor cleanups preparatory to KVM SVE support # gpg: Signature made Fri 16 Aug 2019 14:15:55 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190816: (29 commits) target/arm: Use tcg_gen_extrh_i64_i32 to extract the high word target/arm: Simplify SMMLA, SMMLAR, SMMLS, SMMLSR target/arm: Use tcg_gen_rotri_i32 for gen_swap_half target/arm: Use ror32 instead of open-coding the operation target/arm: Remove redundant shift tests target/arm: Use tcg_gen_deposit_i32 for PKHBT, PKHTB target/arm: Use tcg_gen_extract_i32 for shifter_out_im target/arm/kvm64: Move the get/put of fpsimd registers out target/arm/kvm64: Fix error returns target/arm/cpu: Use div-round-up to determine predicate register array size target/arm/helper: zcr: Add build bug next to value range assumption target/arm/cpu: Ensure we can use the pmu with kvm target/arm/cpu64: Ensure kvm really supports aarch64=off target/arm: Remove helper_double_saturate target/arm: Use unallocated_encoding for aarch32 target/arm: Remove offset argument to gen_exception_bkpt_insn target/arm: Replace offset with pc in gen_exception_internal_insn target/arm: Replace offset with pc in gen_exception_insn target/arm: Replace s->pc with s->base.pc_next target/arm: Remove redundant s->pc & ~1 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Merge remote-tracking branch ↵Peter Maydell
'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging Header cleanup patches for 2019-08-13 # gpg: Signature made Fri 16 Aug 2019 12:39:12 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits) sysemu: Split sysemu/runstate.h off sysemu/sysemu.h sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h Include sysemu/sysemu.h a lot less Clean up inclusion of sysemu/sysemu.h numa: Move remaining NUMA declarations from sysemu.h to numa.h Include sysemu/hostmem.h less numa: Don't include hw/boards.h into sysemu/numa.h Include hw/boards.h a bit less Include hw/qdev-properties.h less Include qemu/main-loop.h less Include qemu/queue.h slightly less Include hw/hw.h exactly where needed Include qom/object.h slightly less Include exec/memory.h slightly less Include migration/vmstate.h less migration: Move the VMStateDescription typedef to typedefs.h Clean up inclusion of exec/cpu-common.h Include hw/irq.h a lot less typedefs: Separate incomplete types and function types ide: Include hw/ide/internal a bit less outside hw/ide/ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Set ENET_BD_BDU in I.MX FEC controllerAaron Hill
This commit properly sets the ENET_BD_BDU flag once the emulated FEC controller has finished processing the last descriptor. This is done for both transmit and receive descriptors. This allows the QNX 7.0.0 BSP for the Sabrelite board (which can be found at http://blackberry.qnx.com/en/developers/bsp) to properly control the FEC. Without this patch, the BSP ethernet driver will never re-use FEC descriptors, as the unset ENET_BD_BDU flag will cause it to believe that the descriptors are still in use by the NIC. Note that Linux does not appear to use this field at all, and is unaffected by this patch. Without this patch, QNX will think that the NIC is still processing its transaction descriptors, and won't send any more data over the network. For reference: On page 1192 of the I.MX 6DQ reference manual revision (Rev. 5, 06/2018), which can be found at https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-6-processors/i.mx-6quad-processors-high-performance-3d-graphics-hd-video-arm-cortex-a9-core:i.MX6Q?&tab=Documentation_Tab&linkline=Application-Note the 'BDU' field is described as follows for the 'Enhanced transmit buffer descriptor': 'Last buffer descriptor update done. Indicates that the last BD data has been updated by uDMA. This field is written by the user (=0) and uDMA (=1).' The same description is used for the receive buffer descriptor. Signed-off-by: Aaron Hill <aa1ronham@gmail.com> Message-id: 20190805142417.10433-1-aaron.hill@alertinnovation.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 15:41:48 +0000