aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)Author
2017-11-28virtio-net: don't touch virtqueue if vm is stoppedJason Wang
Guest state should not be touched if VM is stopped, unfortunately we didn't check running state and tried to drain tx queue unconditionally in virtio_net_set_status(). A crash was then noticed as a migration destination when user type quit after virtqueue state is loaded but before region cache is initialized. In this case, virtio_net_drop_tx_queue_data() tries to access the uninitialized region cache. Fix this by only dropping tx queue data when vm is running. Fixes: 283e2c2adcb80 ("net: virtio-net discards TX data after link down") Cc: Yuri Benditovich <yuri.benditovich@daynix.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-20hw/net/vmxnet3: Fix code to work on big endian hosts, tooThomas Huth
Since commit ab06ec43577177a442e8 we test the vmxnet3 device in the pxe-tester, too (when running "make check SPEED=slow"). This now revealed that the code is not working there if the host is a big endian machine (for example ppc64 or s390x) - "make check SPEED=slow" is now failing on such hosts. The vmxnet3 code lacks endianness conversions in a couple of places. Interestingly, the bitfields in the structs in vmxnet3.h already tried to take care of the *bit* endianness of the C compilers - but the code missed to change the *byte* endianness when reading or writing the corresponding structs. So the bitfields are now wrapped into unions which allow to change the byte endianness during runtime with the non-bitfield member of the union. With these changes, "make check SPEED=slow" now properly works on big endian hosts, too. Reported-by: David Gibson <dgibson@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: David Gibson <dgibson@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-20net: Transmit zero UDP checksum as 0xFFFFEd Swierk
The checksum algorithm used by IPv4, TCP and UDP allows a zero value to be represented by either 0x0000 and 0xFFFF. But per RFC 768, a zero UDP checksum must be transmitted as 0xFFFF because 0x0000 is a special value meaning no checksum. Substitute 0xFFFF whenever a checksum is computed as zero when modifying a UDP datagram header. Doing this on IPv4 and TCP checksums is unnecessary but legal. Add a wrapper for net_checksum_finish() that makes the substitution. (We can't just change net_checksum_finish(), as that function is also used by receivers to verify checksums, and in that case the expected value is always 0x0000.) Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-20hw/net/eepro100: Fix endianness problem on big endian hostsThomas Huth
Since commit 1865e288a823c764cd4344d ("Fix eepro100 simple transmission mode"), the test/pxe-test is broken for the eepro100 device on big endian hosts. However, it seems like that commit did not introduce the problem, but just uncovered it: The EEPRO100State->tx.tbd_array_addr and EEPRO100State->tx.tcb_bytes fields are already in host byte order, since they have already been byte-swapped in the read_cb() function. Thus byte-swapping them in tx_command() again results in the wrong endianness. Removing the byte-swapping here fixes the pxe-test. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-20Revert "Add new PCI ID for i82559a"Jason Wang
This reverts commit 5e89dc01133f8f5e621f6b66b356c6f37d31dafb since: - we should use ID in the spec instead the one used by OEM - in the future, we should allow changing id through either property or EEPROM file. Cc: Stefan Weil <sw@weilnetz.de> Cc: Michael Nawrocki <michael.nawrocki@gtri.gatech.edu> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13Add new PCI ID for i82559aMike Nawrocki
Adds a new PCI ID for the i82559a (0x8086 0x1030) interface. The "x-use-alt-device-id" property controls whether this new ID is to be used, and is true by default, and set to false in a compat entry. Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-11-13Fix eepro100 simple transmission modeMike Nawrocki
The simple transmission mode was treating the area immediately after the transmit command block (TCB) as if it were a transmit buffer descriptor, when in reality it is simply the packet data. This change simply copies the data following the TCB into the packet buffer. Signed-off-by: Mike Nawrocki <michael.nawrocki@gtri.gatech.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-10-31lance: move TYPE_LANCE and SysBusPCNetState from lance.c to lance.hMark Cave-Ayland
This enables them to be used outside of lance.c. We also update the comment to refer to the SPARC32 lance device rather than the AMD PCNet-II device (of which lance is a register-compatible subset). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Jason Wang <jasowang@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_PCIE_DEVICE to all PCIe devicesEduardo Habkost
Change all devices that set is_express=1 to implement INTERFACE_PCIE_DEVICE. Cc: Keith Busch <keith.busch@intel.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: Dmitry Fleytman <dmitry@daynix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: qemu-block@nongnu.org Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add interface names to hybrid PCI devicesEduardo Habkost
The following devices support both PCI Express and Conventional PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS flag and/or conditional pcie_endpoint_cap_init() calls: * vfio-pci (is_express=1, but legacy PCI handled by vfio_populate_device()) * vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize()) * pvscsi (is_express=0, but PCIe handled by pvscsi_realize()) * virtio-pci (is_express=0, but PCIe handled by virtio_pci_dc_realize(), and additional legacy PCI code at virtio_pci_realize()) * base-xhci (is_express=1, but pcie_endpoint_cap_init() call is conditional on pci_bus_is_express(dev->bus) * Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the other hybrid devices Cc: Dmitry Fleytman <dmitry@daynix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27migration: pre_save return intDr. David Alan Gilbert
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-21net: add Sun HME (Happy Meal Ethernet) on-board NICMark Cave-Ayland
Enable it by default for the sparc64-softmmu configuration. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08e1000: Rename the SEC symbol to SEQECKamil Rytarowski
SunOS defines SEC in <sys/time.h> as 1 (commonly used time symbols). This fixes build on SmartOS (Joyent). Patch cherry-picked from pkgsrc by jperkin (Joyent). Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net: rtl8139: do not use old_mmio accessesMatt Parker
Both io and memory use the same mmio functions in the rtl8139 device. This patch removes the separate MemoryRegionOps and old_mmio accessors for memory, and replaces it with an alias to the io memory region. Signed-off-by: Matt Parker <mtparkr@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/rocker: Fix the unusual macro nameMao Zhongyi
Cc: jasowang@redhat.com Cc: jiri@resnulli.us Cc: armbru@redhat.com Cc: f4bug@amsat.org Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/rocker: Convert to realize()Mao Zhongyi
The rocker device still implements the old PCIDeviceClass .init() instead of the new .realize(). All devices need to be converted to .realize(). .init() reports errors with fprintf() and return 0 on success, negative number on failure. Meanwhile, when -device rocker fails, it first report a specific error, then a generic one, like this: $ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker rocker: name too long; please shorten to at most 9 chars qemu-system-x86_64: -device rocker,name=qemu-rocker: Device initialization failed Now, convert it to .realize() that passes errors to its callers via its errp argument. Also avoid the superfluous second error message. After the patch, effect like this: $ x86_64-softmmu/qemu-system-x86_64 -device rocker,name=qemu-rocker qemu-system-x86_64: -device rocker,name=qemu-rocker: name too long; please shorten to at most 9 chars Cc: jasowang@redhat.com Cc: jiri@resnulli.us Cc: armbru@redhat.com Cc: f4bug@amsat.org Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/rocker: Plug memory leak in pci_rocker_init()Mao Zhongyi
pci_rocker_init() leaks a World when the name more than 9 chars, then return a negative value directly, doesn't make a correct cleanup. So add a new goto label to fix it. Cc: jasowang@redhat.com Cc: jiri@resnulli.us Cc: armbru@redhat.com Cc: f4bug@amsat.org Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-08net/rocker: Remove the dead error handlingMao Zhongyi
Memory allocation functions like world_alloc, desc_ring_alloc etc, they are all wrappers around g_malloc, g_new etc. But g_malloc and similar functions doesn't return null. Because they ignore the fact that g_malloc() of 0 bytes returns null. So error checks for these allocation failure are superfluous. Now, remove them entirely. Cc: jasowang@redhat.com Cc: jiri@resnulli.us Cc: armbru@redhat.com Cc: f4bug@amsat.org Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-09-07xilinx_axienet: Convert to DEFINE_PROP_LINKFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170905131149.10669-6-famz@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-31eepro100: replace g_malloc()+memcpy() with g_memdup()Marc-André Lureau
I found these pattern via grepping the source tree. I don't have a coccinelle script for it! Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-01trace-events: fix code style: print 0x before hex numbersVladimir Sementsov-Ogievskiy
The only exception are groups of numers separated by symbols '.', ' ', ':', '/', like 'ab.09.7d'. This patch is made by the following: > find . -name trace-events | xargs python script.py where script.py is the following python script: ========================= #!/usr/bin/env python import sys import re import fileinput rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)' rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')') rbad = re.compile('(?<!0x)' + rhex) files = sys.argv[1:] for fname in files: for line in fileinput.input(fname, inplace=True): arr = re.split(rgroup, line) for i in range(0, len(arr), 2): arr[i] = re.sub(rbad, '0x\g<0>', arr[i]) sys.stdout.write(''.join(arr)) ========================= Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-17virtio-net: fix offload ctrl endianJason Wang
Spec said offloads should be le64, so use virtio_ldq_p() to guarantee valid endian. Fixes: 644c98587d4c ("virtio-net: dynamic network offloads configuration") Cc: qemu-stable@nongnu.org Cc: Dmitry Fleytman <dfleytma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-17virtion-net: Prefer is_power_of_2()Michal Privoznik
We have a function that checks if given number is power of two. We should prefer it instead of expanding the check on our own. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-07-14memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-07-13xilinx: Fix latent error handling bugEduardo Habkost
Assigning directly to *errp is not valid, as errp may be null, &error_fatal, or &error_abort. The !*errp conditional protects against the latter two, but we then leak @local_err. Fortunately, the qdev core always passes pointer to null, so this is "merely" a latent bug. Use error_propagate() instead. Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-arm@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170608133906.12737-2-ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message clarified] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-07-03virtio-net: fix tx queue size for !vhost-userMichael S. Tsirkin
Current code segfaults when no nic peer is specified. Fix it up - fall back to default queue size. Fixes: 9b02e1618cf26a ("virtio-net: enable configurable tx queue size") Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Make errp the last parameter of pci_add_capability()Mao Zhongyi
Add Error argument for pci_add_capability() to leverage the errp to pass info on errors. This way is helpful for its callers to make a better error handling when moving to 'realize'. Cc: pbonzini@redhat.com Cc: rth@twiddle.net Cc: ehabkost@redhat.com Cc: mst@redhat.com Cc: jasowang@redhat.com Cc: marcel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03pci: Fix the wrong assertion.Mao Zhongyi
pci_add_capability returns a strictly positive value on success, correct asserts. Cc: dmitry@daynix.com Cc: jasowang@redhat.com Cc: kraxel@redhat.com Cc: alex.williamson@redhat.com Cc: armbru@redhat.com Cc: marcel@redhat.com Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-03virtio-net: enable configurable tx queue sizeWei Wang
This patch enables the virtio-net tx queue size to be configurable between 256 (the default queue size) and 1024 by the user when the vhost-user backend is used. Currently, the maximum tx queue size for other backends is 512 due to the following limitations: - QEMU backend: the QEMU backend implementation in some cases may send 1024+1 iovs to writev. - Vhost_net backend: there are possibilities that the guest sends a vring_desc of memory which crosses a MemoryRegion thereby generating more than 1024 iovs after translation from guest-physical address in the backend. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-20qdev: Rename DEFINE_PROP_DEFAULT() to DEFINE_PROP_SIGNED()Marc-André Lureau
The rename prepares for the patch after next's DEFINE_PROP_UNSIGNED(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20170607163635.17635-16-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-06-13migration: Split registration functions from vmstate.hJuan Quintela
They are indpendent, and nowadays almost every device register things with qdev->vmsd. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-06-13migration: Move self_announce_delay() to misc.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-06-07Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 07 Jun 2017 04:29:20 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: Revert "Change net/socket.c to use socket_*() functions" again net/rocker: Cleanup the useless return value check Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-07net/rocker: Cleanup the useless return value checkMao Zhongyi
None of pci_dma_read()'s callers check the return value except rocker. There is no need to check it because it always return 0. So the check work is useless. Remove it entirely. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-06-06migration: remove register_savevm()Laurent Vivier
We can replace the four remaining calls of register_savevm() by calls to register_savevm_live(). So we can remove the function and as we don't allocate anymore the ops pointer with g_new0() we don't have to free it then. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-05Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 02 Jun 2017 20:12:48 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/chrfe-pull-request: char: move char devices to chardev/ char: make chr_fe_deinit() optionaly delete backend char: rename functions that are not part of fe char: move CharBackend handling in char-fe unit char: generalize qemu_chr_write_all() be-hci: use backend functions chardev: serial & parallel declaration to own headers chardev: move headers to include/chardev Remove/replace sysemu/char.h inclusion char-win: close file handle except with console char-win: rename hcom->file char-win: rename win_chr_init/poll win_chr_serial_init/poll char-win: remove WinChardev.len char-win: simplify win_chr_read() char: cast ARRAY_SIZE() as signed to silent warning on empty array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02spec/vhost-user spec: Add IOMMU supportMaxime Coquelin
This patch specifies and implements the master/slave communication to support device IOTLB in slave. The vhost_iotlb_msg structure introduced for kernel backends is re-used, making the design close between the two backends. An exception is the use of the secondary channel to enable the slave to send IOTLB miss requests to the master. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-06-02Remove/replace sysemu/char.h inclusionMarc-André Lureau
Those are apparently unnecessary includes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-25virtio_net: Bypass backends for MTU feature negotiationMaxime Coquelin
This patch adds a new internal "x-mtu-bypass-backend" property to bypass backends for MTU feature negotiation. When this property is set, the MTU feature is negotiated as soon as supported by the guest and a MTU value is set via the host_mtu parameter. In case the backend advertises the feature (e.g. DPDK's vhost-user backend), the feature negotiation is propagated down to the backend. When this property is not set, the backend has to support the MTU feature for its negotiation to succeed. For compatibility purpose, this property is disabled for machine types v2.9 and older. Cc: Aaron Conole <aconole@redhat.com> Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-23e1000e: Fix ICR "Other" causes clear logicSameeh Jubran
This commit fixes a bug which causes the guest to hang. The bug was observed upon a "receive overrun" (bit #6 of the ICR register) interrupt which could be triggered post migration in a heavy traffic environment. Even though the "receive overrun" bit (#6) is masked out by the IMS register (refer to the log below) the driver still receives an interrupt as the "receive overrun" bit (#6) causes the "Other" - bit #24 of the ICR register - bit to be set as documented below. The driver handles the interrupt and clears the "Other" bit (#24) but doesn't clear the "receive overrun" bit (#6) which leads to an infinite loop. Apparently the Windows driver expects that the "receive overrun" bit and other ones - documented below - to be cleared when the "Other" bit (#24) is cleared. So to sum that up: 1. Bit #6 of the ICR register is set by heavy traffic 2. As a results of setting bit #6, bit #24 is set 3. The driver receives an interrupt for bit 24 (it doesn't receieve an interrupt for bit #6 as it is masked out by IMS) 4. The driver handles and clears the interrupt of bit #24 5. Bit #6 is still set. 6. 2 happens all over again The Interrupt Cause Read - ICR register: The ICR has the "Other" bit - bit #24 - that is set when one or more of the following ICR register's bits are set: LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit #17, MNG - bit #18 This bug can occur with any of these bits depending on the driver's behaviour and the way it configures the device. However, trying to reproduce it with any bit other than RX0 is challenging and came to failure as the drivers don't implement most of these bits, trying to reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed too as it seems that Windows handles this bit differently. Log sample of the storm: 27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004) 27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004) * This bug behaviour wasn't observed with the Linux driver. This commit solves: https://bugzilla.redhat.com/show_bug.cgi?id=1447935 https://bugzilla.redhat.com/show_bug.cgi?id=1449490 Cc: qemu-stable@nongnu.org Signed-off-by: Sameeh Jubran <sjubran@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23virtio-net: fix wild pointer when remove virtio-net queuesYunjian Wang
The tx_bh or tx_timer will free in virtio_net_del_queue() function, when removing virtio-net queues if the guest doesn't support multiqueue. But it might be still referenced by virtio_net_set_status(), which needs to be set NULL. And also the tx_waiting needs to be set zero to prevent virtio_net_set_status() accessing tx_bh or tx_timer. Cc: qemu-stable@nongnu.org Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-17sysbus: Set user_creatable=false by default on TYPE_SYS_BUS_DEVICEEduardo Habkost
commit 33cd52b5d7b9adfd009e95f07e6c64dd88ae2a31 unset cannot_instantiate_with_device_add_yet in TYPE_SYSBUS, making all sysbus devices appear on "-device help" and lack the "no-user" flag in "info qdm". To fix this, we can set user_creatable=false by default on TYPE_SYS_BUS_DEVICE, but this requires setting user_creatable=true explicitly on the sysbus devices that actually work with -device. Fortunately today we have just a few has_dynamic_sysbus=1 machines: virt, pc-q35-*, ppce500, and spapr. virt, ppce500, and spapr have extra checks to ensure just a few device types can be instantiated: * virt supports only TYPE_VFIO_CALXEDA_XGMAC, TYPE_VFIO_AMD_XGBE. * ppce500 supports only TYPE_ETSEC_COMMON. * spapr supports only TYPE_SPAPR_PCI_HOST_BRIDGE. This patch sets user_creatable=true explicitly on those 4 device classes. Now, the more complex cases: pc-q35-*: q35 has no sysbus device whitelist yet (which is a separate bug). We are in the process of fixing it and building a sysbus whitelist on q35, but in the meantime we can fix the "-device help" and "info qdm" bugs mentioned above. Also, despite not being strictly necessary for fixing the q35 bug, reducing the list of user_creatable=true devices will help us be more confident when building the q35 whitelist. xen: We also have a hack at xen_set_dynamic_sysbus(), that sets has_dynamic_sysbus=true at runtime when using the Xen accelerator. This hack is only used to allow xen-backend devices to be dynamically plugged/unplugged. This means today we can use -device with the following 22 device types, that are the ones compiled into the qemu-system-x86_64 and qemu-system-i386 binaries: * allwinner-ahci * amd-iommu * cfi.pflash01 * esp * fw_cfg_io * fw_cfg_mem * generic-sdhci * hpet * intel-iommu * ioapic * isabus-bridge * kvmclock * kvm-ioapic * kvmvapic * SUNW,fdtwo * sysbus-ahci * sysbus-fdc * sysbus-ohci * unimplemented-device * virtio-mmio * xen-backend * xen-sysdev This patch adds user_creatable=true explicitly to those devices, temporarily, just to keep 100% compatibility with existing behavior of q35. Subsequent patches will remove user_creatable=true from the devices that are really not meant to user-creatable on any machine, and remove the FIXME comment from the ones that are really supposed to be user-creatable. This is being done in separate patches because we still don't have an obvious list of devices that will be whitelisted by q35, and I would like to get each device reviewed individually. Cc: Alexander Graf <agraf@suse.de> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Frank Blaschka <frank.blaschka@de.ibm.com> Cc: Gabriel L. Somlo <somlo@cmu.edu> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Pierre Morel <pmorel@linux.vnet.ibm.com> Cc: Prasad J Pandit <pjp@fedoraproject.org> Cc: qemu-arm@nongnu.org Cc: qemu-block@nongnu.org Cc: qemu-ppc@nongnu.org Cc: Richard Henderson <rth@twiddle.net> Cc: Rob Herring <robh@kernel.org> Cc: Shannon Zhao <zhaoshenglong@huawei.com> Cc: sstabellini@kernel.org Cc: Thomas Huth <thuth@redhat.com> Cc: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-3-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [ehabkost: Small changes at sysbus_device_class_init() comments] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-04-25net/ftgmac100: add a 'aspeed' propertyCédric Le Goater
The Aspeed SoCs have a different definition of the end of the ring buffer bit. Add a property to specify which set of bits should be used by the NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-24net: add FTGMAC100 supportCédric Le Goater
The FTGMAC100 device is an Ethernet controller with DMA function that can be found on Aspeed SoCs (which include NCSI). It is fully compliant with IEEE 802.3 specification for 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and includes Reduced Media Independent Interface (RMII) and Reduced Gigabit Media Independent Interface (RGMII) interfaces. It adopts an AHB bus interface and integrates a link list DMA engine with direct M-Bus accesses for transmitting and receiving packets. It has independent TX/RX fifos, supports half and full duplex (1000 Mbps mode only supports full duplex), flow control for full duplex and backpressure for half duplex. The FTGMAC100 also implements IP, TCP, UDP checksum offloads and supports IEEE 802.1Q VLAN tag insertion and removal. It offers high-priority transmit queue for QoS and CoS applications This model is backed with a RealTek 8211E PHY which is the chip found on the AST2500 EVB. It is complete enough to satisfy two different Linux drivers and a U-Boot driver. Not supported features are : - IEEE 802.1Q VLAN - High Priority Transmit Queue - Wake-On-LAN functions The code is based on the Coldfire Fast Ethernet Controller model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-20cadence_gem: Make the revision a propertyAlistair Francis
Expose the Cadence GEM revision as a property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 541324373cf87b50f8be0439a0cb89f5028b016f.1491947224.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 05:52:37 +0000