aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)Author
2015-02-10rtl8139: g_malloc() can't fail, bury dead error handlingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10Convert some debugging printfs to trace calls in pcnet.c.Don Koch
Signed-off-by: Don Koch <dkoch@verizon.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10Add/convert trace calls in pcnet-pci.c.Don Koch
Add trace calls. Convert some #ifdef DEBUG printfs to trace. Signed-off-by: Don Koch <dkoch@verizon.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-06rtl8139: simplify timer logicPaolo Bonzini
Pavel Dovgalyuk reports that TimerExpire and the timer are not restored correctly on the receiving end of migration. It is not clear to me whether this is really the case, but we can take the occasion to get rid of the complicated code that computes PCSTimeout on the fly upon changes to IntrStatus/IntrMask. Just always keep a timer running, it will fire every ~130 seconds at most if the interrupt is masked with TimerInt != 0. This makes rtl8139_set_next_tctr_time idempotent (when the virtual clock is stopped between two calls, as is the case during migration). Tested with Frediano's qtest. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1421765099-26190-1-git-send-email-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-12hw/net/xen_nic.c: Set 'netdev->mac' to NULL after free itChen Gang
Since net_init() checks whether 'netdev->mac' is NULL, before alloc it; net_release() also need set 'netdev->mac' to NULL after free it. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-12hw/net/xen_nic.c: Need free 'netdev->nic' in net_free() instead of ↵Chen Gang
net_disconnect() net_init() and net_free() are pairs, net_connect() and net_disconnect() are pairs. net_init() creates 'netdev->nic', so also need free it in net_free(). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-12hw/net/xen_nic.c: Free 'netdev->txs' when map 'netdev->rxs' failsChen Gang
When map 'netdev->rxs' fails, need free the original resource, or will cause resource leak. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-01-12net: remove all cleanup methods from NIC NetClientInfosPaolo Bonzini
All NICs have a cleanup function that, in most cases, zeroes the pointer to the NICState. In some cases, it frees data belonging to the NIC. However, this function is never called except when exiting from QEMU. It is not necessary to NULL pointers and free data here; the right place to do that would be in the device's unrealize function, after calling qemu_del_nic. Zeroing the NIC multiple times is also wrong for multiqueue devices. This cleanup function gets in the way of making the NetClientStates for the NIC hold an object_ref reference to the object, so get rid of it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-12-19e1000: defer packets until BM enabledMichael S. Tsirkin
Some guests seem to set BM for e1000 after enabling RX. If packets arrive in the window, device is wedged. Probably works by luck on real hardware, work around this by making can_receive depend on BM. Tested-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-28virtio-net: fix unmap leakJason Wang
virtio_net_handle_ctrl() and other functions that process control vq request call iov_discard_front() which will shorten the iov. This will lead unmapping in virtqueue_push() leaks mapping. Fixes this by keeping the original iov untouched and using a temp variable in those functions. Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417082643-23907-1-git-send-email-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-21rtl8139: fix Pointer to local outside scopeGonglei
Coverity spot: Assigning: iov = struct iovec [3]({{buf, 12UL}, {(void *)dot1q_buf, 4UL}, {buf + 12, size - 12}}) (address of temporary variable of type struct iovec [3]). out_of_scope: Temporary variable of type struct iovec [3] goes out of scope. Pointer to local outside scope (RETURN_LOCAL) use_invalid: Using iov, which points to an out-of-scope temporary variable of type struct iovec [3]. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-21pcnet: fix Negative array index readGonglei
s->xmit_pos maybe assigned to a negative value (-1), but in this branch variable s->xmit_pos as an index to array s->buffer. Let's add a check for s->xmit_pos. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-15bootindex: move calling add_boot_device_patch to bootindex setter functionGonglei
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15vmxnet3: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15spapr_lian: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15rtl8139: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15pcnet: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15ne2000: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. At present, isa_ne2000 device does not support to boot os, so we register two seprate qom getter/setter functions. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15eepro100: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15e1000: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15virtio-net: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-22virtio: Import virtio_vring.hFam Zheng
This header has no further dependencies. It only has some stable data types and primitive functions, so we can copy it to include/hw/virtio in order to allow vring code (and its user virtio-blk dataplane) to be built unconditionally, even for cross compiling. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1410329871-28885-2-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-18Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio, misc bugfixes A bunch of bugfixes - some of these will make sense for 2.1.2 I put Cc: qemu-stable included where appropriate. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: pc: leave more space for BIOS allocations virtio-pci: fix migration for pci bus master vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation virtio-pci: enable bus master for old guests Revert "virtio: don't call device on !vm_running" virtio-net: drop assert on vm stop Revert "rng-egd: remove redundant free" qdev: Move global validation to a single function qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals() test-qdev-global-props: Test handling of hotpluggable and non-device types test-qdev-global-props: Initialize not_used=true for all props test-qdev-global-props: Run tests on subprocess tests: disable global props test for old glib test-qdev-global-props: Trivial comment fix hw/machine: Free old values of string properties Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-18vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiationDamjan Marion
Header length check should happen only if backend is kernel. For user backend there is no reason to reset this bit. vhost-user code does not define .has_vnet_hdr_len so VIRTIO_NET_F_MRG_RXBUF cannot be negotiated even if both sides support it. Signed-off-by: Damjan Marion <damarion@cisco.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-18virtio-net: drop assert on vm stopMichael S. Tsirkin
On vm stop, vm_running state set to stopped before device is notified, so callbacks can get envoked with vm_running = false; and this is not an error. Cc: qemu-stable@nongnu.org Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-12Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
- Memory: improve error reporting and avoid crashes on hotplug - Build: fixing block/iscsi.so and ranlib warnings on Mac OS X - Migration fixes for x86 - The odd KVM patch. # gpg: Signature made Thu 11 Sep 2014 11:21:10 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: (21 commits) gdbstub: init mon_chr through qemu_chr_alloc pckbd: adding new fields to vmstate mc146818rtc: add missed field to vmstate piix: do not set irq while loading vmstate serial: fixing vmstate for save/restore parallel: adding vmstate for save/restore fdc: adding vmstate for save/restore cpu: init vmstate for ticks and clock offset apic_common: vapic_paddr synchronization fix vl: use QLIST_FOREACH_SAFE to visit change state handlers exec: add parameter errp to gethugepagesize exec: report error when memory < hpagesize hostmem-ram: don't exit qemu if size of memory-backend-ram is way too big memory: add parameter errp to memory_region_init_rom_device memory: add parameter errp to memory_region_init_ram exec: add parameter errp to qemu_ram_alloc and qemu_ram_alloc_from_ptr rules.mak: Fix DSO build by pulling in archive symbols util: Don't link host-utils.o if it's empty util: Move general qemu_getauxval to util/getauxval.c trace: Only link generated-tracers.o with "simple" backend ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-08Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2014-09-08 Alexander Graf (11): PPC: KVM: Fix g3beige and mac99 when HV is loaded PPC: mac99: Move NVRAM to page boundary when necessary KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd PPC: KVM: Use vm check_extension for pv hcall PPC: mac99: Fix core99 timer frequency PPC: mac_nvram: Remove unused functions PPC: mac_nvram: Allow 2 and 4 byte accesses PPC: mac_nvram: Split NVRAM into OF and OSX parts PPC: Mac: Move tbfreq into local variable PPC: Cuda: Use cuda timer to expose tbfreq to guest PPC: Fix default config ordering and add eTSEC for ppc64 Alexey Kardashevskiy (7): spapr: Move DT memory node rendering to a helper spapr: Use DT memory node rendering helper for other nodes spapr: Refactor spapr_populate_memory() to allow memoryless nodes spapr: Split memory nodes to power-of-two blocks spapr: Add a helper for node0_size calculation spapr: Fix ibm, associativity for memory nodes spapr_pci: Fix config space corruption Anton Blanchard (2): spapr-vlan: Don't touch last entry in buffer list hypervisor property clashes with hypervisor node Benjamin Herrenschmidt (2): loader: Add load_image_size() to replace load_image() spapr: Locate RTAS and device-tree based on real RMA Bharat Bhushan (4): ppc: debug stub: Get trap instruction opcode from KVM ppc: synchronize excp_vectors for injecting exception ppc: Add software breakpoint support ppc: Add hw breakpoint watchpoint support Gonglei (1): spapr: fix possible memory leak Greg Kurz (1): spapr_pci: map the MSI window in each PHB Nikunj A Dadhania (3): ppc: spapr-rtas - implement os-term rtas call spapr: add uuid/host details to device tree ppc/spapr: Fix MAX_CPUS to 255 Peter Maydell (1): hw/ppc/spapr_hcall.c: Fix typo in function names Tom Musta (20): linux-user: Fix Stack Pointer Bug in PPC setup_rt_frame linux-user: Split PPC Trampoline Encoding from Register Save linux-user: Enable Signal Handlers on PPC64 linux-user: Properly Dereference PPC64 ELFv1 Signal Handler Pointer linux-user: Implement do_setcontext for PPC64 linux-user: Handle PPC64 ELFv2 Function Pointers target-ppc: Bug Fix: rlwinm target-ppc: Bug Fix: rlwnm target-ppc: Bug Fix: rlwimi target-ppc: Bug Fix: mullwo target-ppc: Bug Fix: mullw target-ppc: Bug Fix: mulldo OV Detection target-ppc: Bug Fix: srawi target-ppc: Bug Fix: srad target-ppc: Special Case of rlwimi Should Use Deposit target-ppc: Optimize rlwinm MB=0 ME=31 target-ppc: Optimize rlwnm MB=0 ME=31 target-ppc: Clean Up mullw target-ppc: Clean up mullwo target-ppc: Implement mulldo with TCG # gpg: Signature made Mon 08 Sep 2014 11:51:15 BST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found * remotes/agraf/tags/signed-ppc-for-upstream: (52 commits) hypervisor property clashes with hypervisor node PPC: Fix default config ordering and add eTSEC for ppc64 spapr_pci: map the MSI window in each PHB target-ppc: Implement mulldo with TCG target-ppc: Clean up mullwo target-ppc: Clean Up mullw target-ppc: Optimize rlwnm MB=0 ME=31 target-ppc: Optimize rlwinm MB=0 ME=31 target-ppc: Special Case of rlwimi Should Use Deposit spapr-vlan: Don't touch last entry in buffer list spapr_pci: Fix config space corruption PPC: Cuda: Use cuda timer to expose tbfreq to guest PPC: Mac: Move tbfreq into local variable PPC: mac_nvram: Split NVRAM into OF and OSX parts PPC: mac_nvram: Allow 2 and 4 byte accesses PPC: mac_nvram: Remove unused functions PPC: mac99: Fix core99 timer frequency PPC: KVM: Use vm check_extension for pv hcall KVM: Add helper to run KVM_CHECK_EXTENSION on vm fd target-ppc: Bug Fix: srad ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-08spapr-vlan: Don't touch last entry in buffer listAnton Blanchard
The last 8 bytes of the buffer list is defined to contain the number of dropped frames. At the moment we use it to store rx entries, which trips up ethtool -S: rx_no_buffer: 9223380832981355136 Fix this by skipping the last buffer list entry. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-04Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging Net patches # gpg: Signature made Thu 04 Sep 2014 17:32:44 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: virtio-net: purge outstanding packets when starting vhost net: complete all queued packets on VM stop net: invoke callback when purging queue virtio: don't call device on !vm_running virtio-net: don't run bh on vm stopped net: Forbid dealing with packets when VM is not running Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-04virtio-net: purge outstanding packets when starting vhostMichael S. Tsirkin
whenever we start vhost, virtio could have outstanding packets queued, when they complete later we'll modify the ring while vhost is processing it. To prevent this, purge outstanding packets on vhost start. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04virtio-net: don't run bh on vm stoppedMichael S. Tsirkin
commit 783e7706937fe15523b609b545587a028a2bdd03 virtio-net: stop/start bh when appropriate is incomplete: BH might execute within the same main loop iteration but after vmstop, so in theory, we might trigger an assertion. I was unable to reproduce this in practice, but it seems clear enough that the potential is there, so worth fixing. Cc: qemu-stable@nongnu.org Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc fixes, features A bunch of bugfixes - these will make sense for 2.1.1 Initial Intel IOMMU support. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 03 Sep 2014 14:41:23 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: acpi-build: Set FORCE_APIC_CLUSTER_MODEL bit for FADT flags vhost-scsi: init backend features earlier vhost_net: init acked_features to backend_features vhost_net: start/stop guest notifiers properly Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-04Revert "vhost_net: start/stop guest notifiers properly"Peter Maydell
This reverts commit aad4dce934649b3a398396fc2a76f215bb194ea4. I accidentally merged the wrong version of a pull request which had a buggy version of this patch. Reverting the buggy version means we can then cleanly merge in the correct pull with the corrected change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-03vhost_net: init acked_features to backend_featuresJason Wang
commit 2e6d46d77ed328d34a94688da8371bcbe243479b (vhost: add vhost_get_features and vhost_ack_features) removes the step that initializes the acked_features to backend_features. As this field is now uninitialized, vhost initialization will sometimes fail. To fix, initialize acked_features on each ack. Tested-by: Andrey Korolyov <andrey@xdel.ru> Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-03vhost_net: start/stop guest notifiers properlyJason Wang
commit a9f98bb5ebe6fb1869321dcc58e72041ae626ad8 "vhost: multiqueue support" changed the order of stopping the device. Previously vhost_dev_stop would disable backend and only afterwards, unset guest notifiers. We now unset guest notifiers while vhost is still active. This can lose interrupts causing guest networking to fail. In particular, this has been observed during migration. To fix this, several other changes are needed: - remove the hdev->started assertion in vhost.c since we may want to start the guest notifiers before vhost starts and stop the guest notifiers after vhost is stopped. - introduce the vhost_net_set_vq_index() and call it before setting guest notifiers. This is to guarantee vhost_net has the correct virtqueue index when setting guest notifiers. MST: fix up error handling. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andrey Korolyov <andrey@xdel.ru> Reported-by: "Zhangjie (HZ)" <zhangjie14@huawei.com> Tested-by: William Dauchy <william@gandi.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-02Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc fixes, features A bunch of bugfixes - these will make sense for 2.1.1 Initial Intel IOMMU support. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 02 Sep 2014 16:05:04 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost_net: start/stop guest notifiers properly pci: avoid losing config updates to MSI/MSIX cap regs virtio-net: don't run bh on vm stopped ioh3420: remove unused ioh3420_init() declaration vhost_net: cleanup start/stop condition intel-iommu: add IOTLB using hash table intel-iommu: add context-cache to cache context-entry intel-iommu: add supports for queued invalidation interface intel-iommu: fix coding style issues around in q35.c and machine.c intel-iommu: add Intel IOMMU emulation to q35 and add a machine option "iommu" as a switch intel-iommu: add DMAR table to ACPI tables intel-iommu: introduce Intel IOMMU (VT-d) emulation iommu: add is_write as a parameter to the translate function of MemoryRegionIOMMUOps Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-02vhost_net: start/stop guest notifiers properlyJason Wang
commit a9f98bb5ebe6fb1869321dcc58e72041ae626ad8 vhost: multiqueue support changed the order of stopping the device. Previously vhost_dev_stop would disable backend and only afterwards, unset guest notifiers. We now unset guest notifiers while vhost is still active. This can lose interrupts causing guest networking to fail. In particular, this has been observed during migration. To adapt this, several other changes are needed: - remove the hdev->started assertion in vhost.c since we may want to start the guest notifiers before vhost starts and stop the guest notifiers after vhost is stopped. - introduce the vhost_net_set_vq_index() and call it before setting guest notifiers. This is used to guarantee vhost_net has the correct virtqueue index when setting guest notifiers. Cc: qemu-stable@nongnu.org Reported-by: "Zhangjie (HZ)" <zhangjie14@huawei.com> Tested-by: William Dauchy <wdauchy@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-02virtio-net: don't run bh on vm stoppedMichael S. Tsirkin
commit 783e7706937fe15523b609b545587a028a2bdd03 virtio-net: stop/start bh when appropriate is incomplete: BH might execute within the same main loop iteration but after vmstop, so in theory, we might trigger an assertion. I was unable to reproduce this in practice, but it seems clear enough that the potential is there, so worth fixing. Cc: qemu-stable@nongnu.org Reported-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-09-02vhost_net: cleanup start/stop conditionMichael S. Tsirkin
Checking vhost device internal state in vhost_net looks like a layering violation since vhost_net does not set this flag: it is set and tested by vhost.c. There seems to be no reason to check this: caller in virtio net uses its own flag, vhost_started, to ensure vhost is started/stopped as appropriate. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com>
2014-08-24vmxnet3: Pad short frames to minimum size (60 bytes)Ben Draper
When running VMware ESXi under qemu-kvm the guest discards frames that are too short. Short ARP Requests will be dropped, this prevents guests on the same bridge as VMware ESXi from communicating. This patch simply adds the padding on the network device itself. Signed-off-by: Ben Draper <ben@xrsa.net> Reviewed-by: Dmitry Fleytman <dmitry@daynix.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-19Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
SCSI changes that enable sending vendor-specific commands via virtio-scsi. Memory changes for QOMification and automatic tracking of MR lifetime. # gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2 # gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>" # gpg: aka "Paolo Bonzini <bonzini@gnu.org>" * remotes/bonzini/tags/for-upstream: mtree: remove write-only field memory: Use canonical path component as the name memory: Use memory_region_name for name access memory: constify memory_region_name exec: Abstract away ref to memory region names loader: Abstract away ref to memory region names tpm_tis: remove instance_finalize callback memory: remove memory_region_destroy memory: convert memory_region_destroy to object_unparent ioport: split deletion and destruction nic: do not destroy memory regions in cleanup functions vga: do not dynamically allocate chain4_alias sysbus: remove unused function sysbus_del_io qom: object: move unparenting to the child property's release callback qom: object: delete properties before calling instance_finalize virtio-scsi: implement parse_cdb scsi-block, scsi-generic: implement parse_cdb scsi-block: extract scsi_block_is_passthrough scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo scsi-bus: prepare scsi_req_new for introduction of parse_cdb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-17nic: do not destroy memory regions in cleanup functionsPaolo Bonzini
The memory regions should be destroyed in the unrealize function; since these NICs are not even qdev-ified, they cannot be unplugged and they do not have to do anything to destroy their memory regions. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-15Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-08-15' ↵Peter Maydell
into staging trivial patches for 2014-08-15 # gpg: Signature made Fri 15 Aug 2014 16:13:03 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 6F67 E18E 7C91 C5B1 5514 66A7 BEE5 9D74 A4C3 D7DB * remotes/mjt/tags/trivial-patches-2014-08-15: ivshmem: check the value returned by fstat() l2cap: fix access to freed memory intc: i8259: Convert Array allocation to g_new0 ppc: convert g_new(qemu_irq usages to g_new0 ssi: xilinx_spi: Initialise CS GPIOs as NULL vl: free err qemu-options.hx: fix typo about l2tpv3 vmxnet3: don't use 'Yoda conditions' vl: don't use 'Yoda conditions' spice: don't use 'Yoda conditions' don't use 'Yoda conditions' isa-bus: don't use 'Yoda conditions' audio: don't use 'Yoda conditions' usb: don't use 'Yoda conditions' CODING_STYLE: Section about conditional statement pci-host: update uncorresponding description pci-host: update obsolete reference about piix_pci.c qemu-options.hx: fix a typo of chardev memory: Update obsolete comment about AddrRange field type apic: Fix reported DFR content Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-15vmxnet3: don't use 'Yoda conditions'Gonglei
imitate nearby code about using '!value' or 'value == NULL' Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-14e1000: use symbolic constants to init phy ctrl & status registersGabriel L. Somlo
Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-14e1000: correctly handle phy_ctrl reserved & self-clearing bitsGabriel L. Somlo
Make phyreg_writeops responsible for actually writing their respective phy registers, rather than rely on set_mdic() to do it on their behalf. The only current instance of phyreg_writeops is set_phy_ctrl(); modify it to write the register on its own, while also correctly handling reserved and self-clearing bits. have_autoneg() does not need to check for MII_CR_RESTART_AUTO_NEG, since the only time the flag comes into play is during set_phy_ctrl(), and, following this patch, never actually gets written to the phy control register. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29vhost-net: disable when cross-endianGreg Kurz
As of today, vhost assumes guest and host have the same endianness. This is definitely not compatible with modern PPC64 and ARM that can change endianness at runtime. Let's disable vhost-net and print an error message when we detect such a case: qemu-system-ppc64: vhost-net does not support cross-endian qemu-system-ppc64: unable to start vhost net: 38: falling back on userspace virtio This way users can continue to run VMs without changing their setup and have a chance to know that performance will be impacted. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 16:16:02 +0000