aboutsummaryrefslogtreecommitdiff
path: root/hw/net/spapr_llan.c
AgeCommit message (Collapse)Author
2020-10-28hw/net: move allocation to the heap due to very large stack frameElena Afanasova
[dwg] The stack frame itself probably isn't that big a deal, but avoiding alloca() is generally recommended these days. Signed-off-by: Elena Afanasova <eafanasova@gmail.com> Message-Id: <8f07132478469b35fb50a4706691e2b56b10a67b.camel@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-05-15Drop more @errp parameters after previous commitMarkus Armbruster
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
2020-03-31hw/net: Make NetCanReceive() return a booleanPhilippe Mathieu-Daudé
The NetCanReceive handler return whether the device can or can not receive new packets. Make it obvious by returning a boolean type. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-04spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helperDavid Gibson
Every caller of spapr_vio_qirq() immediately calls qemu_irq_pulse() with the result, so we might as well just fold that into the helper. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-12spapr: Use CamelCase properlyDavid Gibson
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-02-22hw/net/spapr_llan: 6 byte mac address device tree entrySam Bobroff
The spapr-vlan device in QEMU has always presented it's MAC address in the device tree as an 8 byte value, even though PAPR requires it to be 6 bytes. This is because, at the time, AIX required the value to be 8 bytes. However, modern versions of AIX support the (correct) 6 byte value so they no longer require the workaround. It would be neatest to always provide a 6 byte value but that would cause a problem with old Linux kernel ibmveth drivers, so the old 8 byte value is still presented when necessary. Since commit 13f85203e (3.10, May 2013) the driver has been able to handle 6 or 8 byte addresses so versions after that don't need to be considered specially. Drivers from kernels before that can also handle either type of address, but not always: * If the first byte's lowest bits are 10, the address must be 6 bytes. * Otherwise, the address must be 8 bytes. (The two bits in question are significant in a MAC address: they indicate a locally-administered unicast address.) So to maintain compatibility the old 8 byte value is presented when the lowest two bits of the first byte are not 10. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-24hw: Fix typos found by codespellStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-23spapr_llan: convert to trace framework instead of DPRINTFLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_callLaurent Vivier
Since kernel v4.0, linux uses H_CHANGE_LOGICAL_LAN_MAC to change lively the MAC address of an ibmveth interface. As QEMU doesn't implement this h_call, we can't change anymore the MAC address of an spapr-vlan interface. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-19qapi: Change Netdev into a flat unionEric Blake
This is a mostly-mechanical conversion that creates a new flat union 'Netdev' QAPI type that covers all the branches of the former 'NetClientOptions' simple union, where the branches are now listed in a new 'NetClientDriver' enum rather than generated from the simple union. The existence of a flat union has no change to the command line syntax accepted for new code, and will make it possible for a future patch to switch the QMP command to parse a boxed union for no change to valid QMP; but it does have some ripple effect on the C code when dealing with the new types. While making the conversion, note that the 'NetLegacy' type remains unchanged: it applies only to legacy command line options, and will not be ported to QMP, so it should remain a wrapper around a simple union; to avoid confusion, the type named 'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions' in its place. Then, in the C code, we convert from NetLegacy to Netdev as soon as possible, so that the bulk of the net stack only has to deal with one QAPI type, not two. Note that since the old legacy code always rejected 'hubport', we can just omit that branch from the new 'NetLegacyOptions' simple union. Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>: Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com> although the sed script in that patch no longer applies due to other changes in the tree since then, and I also did some manual cleanups (such as fixing whitespace to keep checkpatch happy). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Fixup from Eric squashed in] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-05-27hw/net/spapr_llan: Provide counter with dropped rx frames to the guestThomas Huth
The last 8 bytes of the receive buffer list page (that has been supplied by the guest with the H_REGISTER_LOGICAL_LAN call) contain a counter for frames that have been dropped because there was no suitable receive buffer available. This patch introduces code to use this field to provide the information about dropped rx packets to the guest. There it can be queried with "ethtool -S eth0 | grep rx_no_buffer". Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-27hw/net/spapr_llan: Delay flushing of the RX queue while adding new RX buffersThomas Huth
Currently, the spapr-vlan device is trying to flush the RX queue after each RX buffer that has been added by the guest via the H_ADD_LOGICAL_LAN_BUFFER hypercall. In case the receive buffer pool was empty before, we only pass single packets to the guest this way. This can cause very bad performance if a sender is trying to stream fragmented UDP packets to the guest. For example when using the UDP_STREAM test from netperf with UDP packets that are much bigger than the MTU size, almost all UDP packets are dropped in the guest since the chances are quite high that at least one of the fragments got lost on the way. When flushing the receive queue, it's much better if we'd have a bunch of receive buffers available already, so that fragmented packets can be passed to the guest in one go. To do this, the spapr_vlan_receive() function should return 0 instead of -1 if there are no more receive buffers available, so that receive_disabled = 1 gets temporarily set for the receive queue, and we have to delay the queue flushing at the end of h_add_logical_lan_buffer() a little bit by using a timer, so that the guest gets a chance to add multiple RX buffers before we flush the queue again. This improves the UDP_STREAM test with the spapr-vlan device a lot: Running netserver -p 44444 -L <guestip> -f -D -4 in the guest, and netperf -p 44444 -L <hostip> -H <guestip> -t UDP_STREAM -l 60 -- -m 16384 in the host, I get the following values _without_ this patch: Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 229376 16384 60.00 1738970 0 3798.83 229376 60.00 23 0.05 That "0.05" means that almost all UDP packets got lost/discarded at the receiving side. With this patch applied, the value look much better: Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 229376 16384 60.00 1789104 0 3908.35 229376 60.00 22818 49.85 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19hw: do not use VMSTATE_*TLPaolo Bonzini
Reserve this to CPU state serialization. Luckily, they were only used by sPAPR devices and these are ppc64 only. So there is no change to migration format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-24hw/net/spapr_llan: Enable the RX buffer pools by default for new machinesThomas Huth
RX buffer pools are now enabled by default for new machine types. For older machine types, they are still disabled to avoid breaking migration. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24hw/net/spapr_llan: Fix receive buffer handling for better performanceThomas Huth
tl;dr: This patch introduces an alternate way of handling the receive buffers of the spapr-vlan device, resulting in much better receive performance for the guest. Full story: One of our testers recently discovered that the performance of the spapr-vlan device is very poor compared to other NICs, and that a simple "ping -i 0.2 -s 65507 someip" in the guest can result in more than 50% lost ping packets (especially with older guest kernels < 3.17). After doing some analysis, it was clear that there is a problem with the way we handle the receive buffers in spapr_llan.c: The ibmveth driver of the guest Linux kernel tries to add a lot of buffers into several buffer pools (with 512, 2048 and 65536 byte sizes by default, but it can be changed via the entries in the /sys/devices/vio/1000/pool* directories of the guest). However, the spapr-vlan device of QEMU only tries to squeeze all receive buffer descriptors into one single page which has been supplied by the guest during the H_REGISTER_LOGICAL_LAN call, without taking care of different buffer sizes. This has two bad effects: First, only a very limited number of buffer descriptors is accepted at all. Second, we also hand 64k buffers to the guest even if the 2k buffers would fit better - and this results in dropped packets in the IP layer of the guest since too much skbuf memory is used. Though it seems at a first glance like PAPR says that we should store the receive buffer descriptors in the page that is supplied during the H_REGISTER_LOGICAL_LAN call, chapter 16.4.1.2 in the LoPAPR spec declares that "the contents of these descriptors are architecturally opaque, none of these descriptors are manipulated by code above the architected interfaces". That means we don't have to store the RX buffer descriptors in this page, but can also manage the receive buffers at the hypervisor level only. This is now what we are doing here: Introducing proper RX buffer pools which are also sorted by size of the buffers, so we can hand out a buffer with the best fitting size when a packet has been received. To avoid problems with migration from/to older version of QEMU, the old behavior is also retained and enabled by default. The new buffer management has to be enabled via a new "use-rx-buffer-pools" property. Now with the new buffer pool management enabled, the problem with "ping -s 65507" is fixed for me, and the throughput of a simple test with wget increases from creeping 3MB/s up to 20MB/s! Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-24hw/net/spapr_llan: Extract rx buffer code into separate functionsThomas Huth
Refactor the code a little bit by extracting the code that reads and writes the receive buffer list page into separate functions. There should be no functional change in this patch, this is just a preparation for the upcoming extensions that introduce receive buffer pools. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29ppc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2015-07-07spapr: Merge sPAPREnvironment into sPAPRMachineStateDavid Gibson
The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09spapr_vio: Convert to realize()Markus Armbruster
Bonus fix: always set an error on failure. Some failures were silent before, except for the generic error set by device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-12net: remove all cleanup methods from NIC NetClientInfosPaolo Bonzini
All NICs have a cleanup function that, in most cases, zeroes the pointer to the NICState. In some cases, it frees data belonging to the NIC. However, this function is never called except when exiting from QEMU. It is not necessary to NULL pointers and free data here; the right place to do that would be in the device's unrealize function, after calling qemu_del_nic. Zeroing the NIC multiple times is also wrong for multiqueue devices. This cleanup function gets in the way of making the NetClientStates for the NIC hold an object_ref reference to the object, so get rid of it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-15bootindex: move calling add_boot_device_patch to bootindex setter functionGonglei
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15spapr_lian: add bootindex to qom propertyGonglei
Add a qom property with the same name 'bootindex', when we remove it form qdev property, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-08spapr-vlan: Don't touch last entry in buffer listAnton Blanchard
The last 8 bytes of the buffer list is defined to contain the number of dropped frames. At the moment we use it to store rx entries, which trips up ethtool -S: rx_no_buffer: 9223380832981355136 Fix this by skipping the last buffer list entry. Signed-off-by: Anton Blanchard <anton@samba.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (ppc)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2014-03-20spapr_llan: Add to boot device listAlexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-05spapr-vlan: flush queue whenever can_receive can go from false to trueAlexey Kardashevskiy
When the guests adds buffers to receive queue, the network device should flush its queue of pending packets. This is done with qemu_flush_queued_packets. This adds a call to qemu_flush_queued_packets() which wakes up the main loop and let QEMU update the network device status which now is "can receive". The patch basically does the same thing as e8b4c68 does. Suggested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-11-08spapr: add vio-bus devices to categoriesAlexey Kardashevskiy
In order to get devices appear in output of "./qemu-system-ppc64 -device ?", they must be assigned to one of DEVICE_CATEGORY_XXXX. This puts VIO devices classes to corresponding categories. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-29spapr: Rename 'dprintf' to 'DPRINTF'Peter Maydell
'dprintf' is the name of a POSIX standard function so we should not be stealing it for our debug macro. Rename to 'DPRINTF' (in line with a number of other source files.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Kevin Wolf <kwolf@redhat.com> Message-id: 1375100199-13934-5-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29pseries: savevm support for PAPR VIO logical lanDavid Gibson
This patch adds the necessary VMStateDescription information to support savevm/loadvm for the spapr_llan (PAPR logical lan) device. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374175984-8930-4-git-send-email-aliguori@us.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-06spapr_llan: fix device reenablingAlexey Kardashevskiy
Normally, the "tap" device is polled by QEMU if a guest NIC can receive packets. If a guest NIC is stopped during transfer (rmmod or ifdown), it may still have packets in a queue which have to be send to the guest before QEMU enables polling of a "tap" interface via tap_update_fd_handler(). However the spapr_llan device was missing the qemu_flush_queued_packets() call so the tap_send_completed() callback was never called and therefore "tap" interface polling was not enabled ever. The patch fixes this problem. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26pseries: Convert VIO code to QOM style type safe(ish) castsDavid Gibson
Curerntly the pseries VIO device code contains quite a few explicit uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe, and not the conventional way of doing things in the QOM model. This patch converts the code to use the QOM convention of per-type macros to do verified casts with OBJECT_CHECK(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 07:24:57 +0000