aboutsummaryrefslogtreecommitdiff
path: root/hw/ne2000.c
AgeCommit message (Collapse)Author
2011-09-19pci: interrupt pin documentation updateMichael S. Tsirkin
Fix up some erroneous comments in code: interrupt pins are named A-D, the interrupt pin register is always readonly and isn't zeroed out on reset. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08ne2000: convert to memory APIAvi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-12hw/ne2000.c: convert to PCIDeviceInfo to initialize idsIsaku Yamahata
use PCIDeviceInfo to initialize ids. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-04-18PXE: Use consistent naming for PXE ROMsAlex Williamson
And add missing ROMs to tarbin build target. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2010-12-11Add bootindex for option roms.Gleb Natapov
Extend -option-rom command to have additional parameter ,bootindex=. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23ne2000: switch to symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-04Add "static" to please SparseBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert ne2000 to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27ne2000: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27ne2k_pci: use qdev properties for configuration.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27ne2k_isa: use qdev properties for configuration.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-20Compile ne2000 only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-10qdev/isa: convert ne2000Gerd Hoffmann
Also split the isa bits into a separate source file, so we don't drag in a dependency for isa-bus.o for machines which want ne2k_pci only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-08-27Add pci_ne2000_{save/load} functions, then remove pci_dev NE2000State fieldJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27We need PCINE2000State for save/load functionsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: Change casts to DO_UPCAST() for PCINE2000StateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: pci_dev has this very value with the right typeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ne2000: remove casts from void *Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09qdev: update pci device registration.Gerd Hoffmann
Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch of parameters. Also adds config_read and config_write callbacks to PCIDeviceInfo, so drivers needing these can be converted to the qdev device API too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-14PCI network qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-03use PCI_HEADER_TYPE.Isaku Yamahata
use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-05-01Pci nic: pci_register_device can failChris Wright
The pci_register_device() call in PCI nic initialization routines can fail. Handle this failure and propagate a meaningful error message to the user instead of generating a SEGV. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13Add and use remaining #defines for PCI device IDs (Stuart Brady)aliguori
This patch adds and uses #defines for the remaining hardcoded PCI device IDs. It also moves definitions taken from linux/pci_ids.h into a separate header (hw/pci_ids.h), removes the 'RTL' from PCI_DEVICE_ID_REALTEK_RTL8029, and renames PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E to match Linux's definition. Changes in v2: * Don't use C99-style comments * Move definitions from linux/pci_ids.h into a separate header * Rename PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6841 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-11qemu: return PCIDevice on net device init and record devfn (Marcelo Tosatti)aliguori
Change the PCI network drivers init functions to return the PCIDev, to inform which slot has been hot-plugged. Also record PCIDevice structure on NICInfo to locate for release on hot-removal. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6593 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01Add and use #defines for PCI device classesblueswir1
This patch adds and uses #defines for PCI device classes and subclases, using a new pci_config_set_class() function, similar to the recently added pci_config_set_vendor_id() and pci_config_set_device_id(). Change since v1: fixed compilation of hw/sun4u.c Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01Update #defines for PCI vendor and device IDs from OpenBIOS and Linuxblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6490 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26Define PCI vendor and device IDs in pci.h (Stuart Brady)aliguori
This patch defines PCI vendor and device IDs in pci.h (matching those from Linux's pci_ids.h), and uses those definitions where appropriate. Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id() accessors as suggested by Anthony Liguori. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-18Various NICs: Fix suspend/resume of multiple instances, by Jan Kiszka.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4892 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-28Revert "Fix ne2000_can_receive() function".aurel32
When the card is stopped, it should always accept packets, and then discard them. Thanks to Paul Brook for the explanations. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4128 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-28Fix ne2000_can_receive() functionaurel32
(Samuel Thibault) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4117 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-16Fix wrong signedness, by Andre Przywara.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3815 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 16:37:21 +0000