aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)Author
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-01hw/misc/aspeed_xdma: New deviceEddie James
The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-03edu: uses uint64_t in dma operationLi Qiang
The dma related variable dma.dst/src/cnt is dma_addr_t, it is uint64_t in x64 platform. Change these usage from uint32_to uint64_t to avoid trancation in edu_dma_timer. Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20190510164349.81507-4-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03edu: mmio: allow 64-bit access in read dispatchLi Qiang
The edu spec says when address >= 0x80, the MMIO area can be accessed by 64-bit. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20190510164349.81507-3-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-03edu: mmio: allow 64-bit accessLi Qiang
The edu spec says the MMIO area can be accessed by 64-bit. However currently the 'max_access_size' is not so the MMIO access dispatch can only access 32-bit one time. This patch fixes this to respect the spec. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Message-Id: <20190510164349.81507-2-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-24hw/misc/macio: Use object_initialize_child for correct ref. countingPhilippe Mathieu-Daudé
As explained in commit aff39be0ed97: Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. This patch was generated using the following Coccinelle script (with a bit of manual fix-up for overly long lines): @use_object_initialize_child@ expression parent_obj; expression child_ptr; expression child_name; expression child_type; expression child_size; expression errp; @@ ( - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, &error_abort, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), NULL); ... ?- object_unref(OBJECT(child_ptr)); | - object_initialize(child_ptr, child_size, child_type); + object_initialize_child(parent_obj, child_name, child_ptr, child_size, + child_type, errp, NULL); ... when != parent_obj - object_property_add_child(parent_obj, child_name, OBJECT(child_ptr), errp); ... ?- object_unref(OBJECT(child_ptr)); ) While the object_initialize() function doesn't take an 'Error *errp' argument, the object_initialize_child() does. Since this code is used when a machine is created (and is not yet running), we deliberately choose to use the &error_abort argument instead of ignoring errors if an object creation failed. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Inspired-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190507163416.24647-3-philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-22hw/misc/exynos4210_rng: Use qemu_guest_getrandomRichard Henderson
The random number is intended for use by the guest. As such, we should honor the -seed argument for reproducibility. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22hw/misc/bcm2835_rng: Use qemu_guest_getrandom_nofailRichard Henderson
The random number is intended for use by the guest. As such, we should honor the -seed argument for reproducibility. Use the *_nofail routine instead of rolling our own error handling locally. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22hw/misc/nrf51_rng: Use qemu_guest_getrandom_nofailRichard Henderson
The random number is intended for use by the guest. As such, we should honor the -seed argument for reproducibility. Use the *_nofail routine instead of error_abort directly. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-22aspeed/scu: Use qemu_guest_getrandom_nofailRichard Henderson
The random number is intended for use by the guest. As such, we should honor the -seed argument for reproducibility. Use the *_nofail routine instead of rolling our own error handling locally. Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-17leon3: introduce the plug and play mechanismKONRAD Frederic
This adds the AHB and APB plug and play devices. They are scanned during the linux boot to discover the various peripheral. Reviewed-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-05-13hw/arm: Express dependencies of the fsl-imx31 machine with KconfigThomas Huth
Add Kconfig dependencies for the fsl-imx31 / kzm machine. This patch is slightly based on earlier work by Ákos Kovács (i.e. his "hw/arm/Kconfig: Add ARM Kconfig" patch). Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-29hw/devices: Move CBus declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Delete unused trace pointsMarkus Armbruster
Tracked down with cleanup-trace-events.pl. Funnies requiring manual post-processing: * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_udp_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-5-armbru@redhat.com Message-Id: <20190314180929.27722-5-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-18kconfig: add dependencies on CONFIG_MSI_NONBROKENPaolo Bonzini
For devices that require msi_init/msix_init to succeed, add a dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices from appearing in a binary that cannot instantiate them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ppc: Express dependencies of the Mac machines with kconfigThomas Huth
This will make it for example easier if the users want to disable one of the two machines for their builds. Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07ptimer: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-39-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-01Merge remote-tracking branch ↵Peter Maydell
'remotes/cminyard/tags/i2c-for-release-20190228' into staging This has been out there long enough, I need to get this in. This was changed a little bit since my post on Feb 20 (to which there were no comments) due to changes I had to work around: Change b296b664abc73253 "smbus: Add a helper to generate SPD EEPROM data" added a function to include/hw/i2c/smbus.h, which I had to move to include/hw/smbus_eeprom.h. There were some changes to hw/i2c/Makefile.objs that I had to fix up. Beyond that, no changes. Thanks, -corey # gpg: Signature made Thu 28 Feb 2019 18:05:49 GMT # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/i2c-for-release-20190228: i2c: Verify that the count passed in to smbus_eeprom_init() is valid i2c:smbus_eeprom: Add a reset function to smbus_eeprom i2c:smbus_eeprom: Add vmstate handling to the smbus eeprom i2c:smbus_eeprom: Add a size constant for the smbus_eeprom size i2c:smbus_eeprom: Add normal type name and cast to smbus_eeprom.c i2c:smbus_slave: Add an SMBus vmstate structure i2c:pm_smbus: Fix state transfer migration: Add a VMSTATE_BOOL_TEST() macro i2c:pm_smbus: Fix pm_smbus handling of I2C block read boards.h: Ignore migration for SMBus devices on older machines i2c:smbus: Make white space in switch statements consistent i2c:smbus_eeprom: Get rid of the quick command i2c:smbus: Simplify read handling i2c:smbus: Simplify write operation i2c:smbus: Correct the working of quick commands i2c: Don't check return value from i2c_recv() arm:i2c: Don't mask return from i2c_recv() i2c: have I2C receive operation return uint8_t i2c: Split smbus into parts Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-28hw/arm/armsse: Unify init-svtor and cpuwait handlingPeter Maydell
At the moment the handling of init-svtor and cpuwait initial values is split between armsse.c and iotkit-sysctl.c: the code in armsse.c sets the initial state of the CPU object by setting the init-svtor and start-powered-off properties, but the iotkit-sysctl.c code has its own code setting the reset values of its registers (which are then used when updating the CPU when the guest makes runtime changes). Clean this up by making the armsse.c code set properties on the iotkit-sysctl object to define the initial values of the registers, so they always match the initial CPU state, and update the comments in armsse.c accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-9-peter.maydell@linaro.org
2019-02-28hw/arm/iotkit-sysctl: Implement CPUWAIT and INITSVTOR*Peter Maydell
The CPUWAIT register acts as a sort of power-control: if a bit in it is 1 then the CPU will have been forced into waiting when the system was reset (which in QEMU we model as the CPU starting powered off). Writing a 0 to the register will allow the CPU to boot (for QEMU, we model this as powering it on). Note that writing 0 to the register does not power off a CPU. For this to work correctly we need to also honour the INITSVTOR* registers, which let the guest control where the CPU will load its SP and PC from when it comes out of reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-8-peter.maydell@linaro.org
2019-02-28hw/arm/iotkit-sysctl: Add SSE-200 registersPeter Maydell
The SYSCTL block in the SSE-200 has some extra registers that are not present in the IoTKit version. Add these registers (as reads-as-written stubs), enabled by a new QOM property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-7-peter.maydell@linaro.org
2019-02-28hw/misc/iotkit-sysctl: Correct typo in INITSVTOR0 register namePeter Maydell
The iotkit-sysctl device has a register it names INITSVRTOR0. This is actually a typo present in the IoTKit documentation and also in part of the SSE-200 documentation: it should be INITSVTOR0 because it is specifying the initial value of the Secure VTOR register in the CPU. Correct the typo. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-6-peter.maydell@linaro.org
2019-02-28hw/misc/armsse-mhu.c: Model the SSE-200 Message Handling UnitPeter Maydell
Implement a model of the Message Handling Unit (MHU) found in the Arm SSE-200. This is a simple device which just contains some registers which allow the two cores of the SSE-200 to raise interrupts on each other. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-2-peter.maydell@linaro.org
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-22Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-feb-21-2019-v2' into staging MIPS queue for February 21st, 2019, v2 # gpg: Signature made Thu 21 Feb 2019 18:37:04 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-feb-21-2019-v2: target/mips: fulong2e: Dynamically generate SPD EEPROM data target/mips: fulong2e: Fix bios flash size hw/pci-host/bonito.c: Add PCI mem region mapped at the correct address target/mips: implement QMP query-cpu-definitions command tests/tcg: target/mips: Add wrappers for MSA integer compare instructions tests/tcg: target/mips: Change directory name 'bit-counting' to 'bit-count' tests/tcg: target/mips: Correct path to headers in some test source files hw/misc: mips_itu: Fix 32/64 bit issue in a line involving shift operator Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-21hw/misc: mips_itu: Fix 32/64 bit issue in a line involving shift operatorAleksandar Markovic
Fix 32/64 bit issue in a line involving shift operator. "1 << ..." calculation of size is done as a 32-bit signed integer which may then be unintentionally sign-extended into the 64-bit result. The problem was discovered by Coverity (CID 1398648). Using "1ULL" instead of "1" on the LHS of the shift fixes this problem. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-21hw/misc/tz-ppc: Support having unused ports in the middle of the rangePeter Maydell
The Peripheral Protection Controller's handling of unused ports is that if there is nothing connected to the port's downstream then it does not create the sysbus MMIO region for the upstream end of the port. This results in odd behaviour when there is an unused port in the middle of the range: since sysbus MMIO regions are implicitly consecutively allocated, any used ports above the unused ones end up with sysbus MMIO region numbers that don't match the port number. Avoid this numbering mismatch by creating dummy MMIO regions for the unused ports. This doesn't change anything for our existing boards, which don't have any gaps in the middle of the port ranges they use; but it will be needed for the Musca board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-02-17cuda: decrease time delay before raising VIA SR interrupt and remove fast pathMark Cave-Ayland
In order to handle a race condition in the MacOS 9 CUDA driver, a delay was introduced when raising the VIA SR interrupt inspired by similar code in MacOnLinux. During original testing of the MacOS 9 patches it was found that the 30us delay used in MacOnLinux did not work reliably within QEMU, and a value of 300us was required to function correctly. Recent experiments have shown two things: firstly when booting Linux, MacOS 9 and MacOS X the fast path which bypasses the delay is never triggered once the OS kernel is loaded making it effectively useless. Rather than leave this code in place where a guest could potentially enable it by accident and break itself, we might as well just remove it. Secondly the previous reliability issues are no longer present, and this value can be reduced down to 20us with no apparent ill effects. This has the benefit of considerably improving the responsiveness of the ADB keyboard and mouse within the guest. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-14hw/mips_cpc: kick a VP when putting it into Run statewqMiodrag Dinic
While testing mttcg VP0 could get stuck in a loop waiting for other VPs to come up (which never actually happens). To fix this, kick VPs while they are being powered up by Cluster Power Controller in an async task which is triggered once the host thread is being spawned. Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-01hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register blockPeter Maydell
The SSE-200 has a CPU_IDENTITY register block, which is a set of read-only registers. As well as the usual PID/CID registers, there is a single CPUID register which indicates whether the CPU is CPU 0 or CPU 1. Implement a model of this register block. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
2019-02-01iotkit-sysinfo: Make SYS_VERSION and SYS_CONFIG configurablePeter Maydell
The SYS_VERSION and SYS_CONFIG register values differ between the IoTKit and SSE-200. Make them configurable via QOM properties rather than hard-coded, and set them appropriately in the ARMSSE code that instantiates the IOTKIT_SYSINFO device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-15-peter.maydell@linaro.org
2019-02-01hw/misc/iotkit-secctl: Support 4 internal MPCsPeter Maydell
The SSE-200 has 4 banks of SRAM, each with its own internal Memory Protection Controller. The interrupt status for these extra MPCs appears in the same security controller SECMPCINTSTATUS register as the MPC for the IoTKit's single SRAM bank. Enhance the iotkit-secctl device to allow 4 MPCs. (If the particular IoTKit/SSE variant in use does not have all 4 MPCs then the unused inputs will simply result in the SECMPCINTSTATUS bits being zero as required.) The hardcoded constant "1"s in armsse.c indicate the actual number of SRAM MPCs the IoTKit has, and will be replaced in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-9-peter.maydell@linaro.org
2019-01-30hw: edu: set category of the edu devicekumar sourav
Sets the category of edu device as DEVICE_CATEGORY_MISC. Devices should be assigned to one of DEVICE_CATEGORY_XXXX. Signed-off-by: kumar sourav <sourav.jb1988@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190124144606.4352-1-sourav.jb1988@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-21Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-january-17-2019-v2' into staging MIPS queue for January 17, 2019 - v2 # gpg: Signature made Fri 18 Jan 2019 15:55:35 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-january-17-2019-v2: target/mips: Introduce 32 R5900 multimedia registers target/mips: Rename 'rn' to 'register_name' target/mips: Add CP0 register MemoryMapID target/mips: Amend preprocessor constants for CP0 registers target/mips: Update ITU to handle bus errors target/mips: Update ITU to utilize SAARI and SAAR CP0 registers target/mips: Add field and R/W access to ITU control register ICR0 target/mips: Provide R/W access to SAARI and SAAR CP0 registers target/mips: Add fields for SAARI and SAAR CP0 registers target/mips: Use preprocessor constants for 32 major CP0 registers target/mips: Add preprocessor constants for 32 major CP0 registers target/mips: Move comment containing summary of CP0 registers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-18target/mips: Update ITU to handle bus errorsYongbok Kim
Update ITU to handle bus errors. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Update ITU to utilize SAARI and SAAR CP0 registersYongbok Kim
Update ITU to utilize SAARI and SAAR CP0 registers. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-18target/mips: Add field and R/W access to ITU control register ICR0Yongbok Kim
Add field and R/W access to ITU control register ICR0. Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 01:07:38 +0000