aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)Author
2016-04-19cuda: fix off-by-one error in SET_TIME commandAurelien Jarno
With the new framework the cuda_cmd_set_time command directly receive the data, without the command byte. Therefore the time is stored at in_data[0], not at in_data[1]. This fixes the "hwclock --systohc" command in a guest. Cc: Hervé Poussineau <hpoussin@reactos.org> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> [this fixes a regression introduced by e647317 "cuda: port SET_TIME command to new framework"] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-13ivshmem: fix ivshmem-{plain,doorbell} crash without argMarc-André Lureau
"qemu -device ivshmem-{plain,doorbell}" will crash, because the device doesn't check that the required argument is provided. (screwed up in commit 5400c02) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-04-08Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160408' into stagingPeter Maydell
MIPS patches 2016-04-08 Changes: * fix off-by-one error in ITU # gpg: Signature made Fri 08 Apr 2016 10:43:16 BST using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160408: hw/mips_itu: fix off-by-one reported by Coverity Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-08hw/mips_itu: fix off-by-one reported by CoverityLeon Alrae
Fix off-by-one error in ITC Tag read. Remove the switch as we just want to check if index is in valid range rather than test against list of values. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-04-07pci-testdev: fast mmio supportMichael S. Tsirkin
Teach PCI testdev to use fast MMIO when kvm makes it available. Before: mmio-wildcard-eventfd:pci-mem 2271 After: mmio-wildcard-eventfd:pci-mem 1218 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-30hw/mips: implement ITC Storage - Bypass ViewLeon Alrae
Bypass View does not cause issuing thread to block and does not affect any of the cells state bit. Read from a FIFO cell returns the value of the oldest entry. Store to a FIFO cell changes the value of the newest entry. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement ITC Storage - P/V Sync and Try ViewsLeon Alrae
P/V Synchronized and Try Views can be used to access Semaphore cells. Load returns current value and post-decrements the value in the cell (until it reaches zero). Stores increment the value (until it saturates at 0xFFFF). P/V Synchronized View causes the issuing thread to block on read if value is 0. P/V Try View does not block the thread, it returns 0 in this case. Cell's Empty and Full bits are not modified. Trap bit (i.e. Gating Storage exceptions) not implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement ITC Storage - Empty/Full Sync and Try ViewsLeon Alrae
Empty/Full Synchronized and Try views can be used to access FIFO cells. Store to the FIFO cell pushes the value into the queue, load pops the oldest element from the queue. Cell's Full and Empty bits are automatically updated to reflect new state of the cell. Empty/Full Synchronized View causes the issuing thread to block when FIFO is empty while thread is performing a read, or FIFO is full while thread is performing a write. Empty/Full Try View never blocks the thread. If cell is full then write is ignored, if cell is empty then load returns 0. Trap bit (i.e. Gating Storage exceptions) not implemented. Store Conditional support for E/F Try View (i.e. indicate failure if FIFO is full) not implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement ITC Storage - Control ViewLeon Alrae
Control view is used to access the ITC Storage Cell Tags. It never causes the issuing thread to block. Guest can empty the FIFO cell by setting Empty bit to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement ITC Configuration Tags and Storage CellsLeon Alrae
Implement ITC as a single object consisting of two memory regions: 1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which are accessible by the CPU via CACHE instruction. Also adding MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will dispatch reads/writes directly. 2) storage_io: memory-mapped ITC Storage whose address space is configurable (i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers. ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the ITC cell tag indicates the type of the cell. If the ITC Storage contains both types of cells then FIFOs are located before Semaphores. Since issuing thread can get blocked on the access to a cell (in E/F Synchronized and P/V Synchronized Views) each cell has a bitmap to track which threads are currently blocked. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips/cps: create CPC block inside CPSLeon Alrae
Create Cluster Power Controller and add a link to the CPC MemoryRegion in GCR. Guest can enable / map CPC to any physical address by writing to the memory-mapped GCR_CPC_BASE register. Set vp-start-reset property to 1 to allow only first VP to run from reset. Others are brought up by the guest via CPC memory-mapped registers. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: add initial Cluster Power Controller supportLeon Alrae
Cluster Power Controller (CPC) is responsible for power management in multiprocessing system. It provides registers to control the power and the clock frequency of the individual elements in the system. This patch implements only three registers that are used to control the power state of each VP on a single core: * VP Run is a write-only register used to set each VP to the run state * VP Stop is a write-only register used to set each VP to the suspend state * VP Running is a read-only register indicating the run state of each VP Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: add initial Global Config Register supportYongbok Kim
Add initial GCR support to indicate number of VPs present in the system, L2 bypass mode and revision number. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: * removed GIC part, * changed commit message, * replaced %lx format spec. with PRIx64, * renamed mips_gcr.{c,h} to mips_cmgcr.{c,h}, * replaced CONFIG_MIPS_GIC with CONFIG_MIPS_CPS] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/hw/hw.h: Don't include qemu-common.hMarkus Armbruster
qemu-common.h should only be included by .c files. Its file comment explains why: "No header file should depend on qemu-common.h, as this would easily lead to circular header dependencies." hw/hw.h includes qemu-common.h, but its users generally need only hw_error() and qemu/module.h from it. Move the former to hw/hw.h, include the latter there, and drop the ill-advised include. hw/misc/cbus.c now misses hw_error(), so include hw/hw.h there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-21ivshmem: Require master to have ID zeroMarkus Armbruster
Migration with ivshmem needs to be carefully orchestrated to work. Exactly one peer (the "master") migrates to the destination, all other peers need to unplug (and disconnect), migrate, plug back (and reconnect). This is sort of documented in qemu-doc. If peers connect on the destination before migration completes, the shared memory can get messed up. This isn't documented anywhere. Fix that in qemu-doc. To avoid messing up register IVPosition on migration, the server must assign the same ID on source and destination. ivshmem-spec.txt leaves ID assignment unspecified, however. Amend ivshmem-spec.txt to require the first client to receive ID zero. The example ivshmem-server complies: it always assigns the first unused ID. For a bit of additional safety, enforce ID zero for the master. This does nothing when we're not using a server, because the ID is zero for all peers then. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-40-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Drop ivshmem property x-memdevMarkus Armbruster
Use ivshmem-plain instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-39-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Clean up after the previous commitMarkus Armbruster
Move code to more sensible places. Use the opportunity to reorder and document IVShmemState members. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-38-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Split ivshmem-plain, ivshmem-doorbell off ivshmemMarkus Armbruster
ivshmem can be configured with and without interrupt capability (a.k.a. "doorbell"). The two configurations have largely disjoint options, which makes for a confusing (and badly checked) user interface. Moreover, the device can't tell the guest whether its doorbell is enabled. Create two new device models ivshmem-plain and ivshmem-doorbell, and deprecate the old one. Changes from ivshmem: * PCI revision is 1 instead of 0. The new revision is fully backwards compatible for guests. Guests may elect to require at least revision 1 to make sure they're not exposed to the funny "no shared memory, yet" state. * Property "role" replaced by "master". role=master becomes master=on, role=peer becomes master=off. Default is off instead of auto. * Property "use64" is gone. The new devices always have 64 bit BARs. Changes from ivshmem to ivshmem-plain: * The Interrupt Pin register in PCI config space is zero (does not use an interrupt pin) instead of one (uses INTA). * Property "x-memdev" is renamed to "memdev". * Properties "shm" and "size" are gone. Use property "memdev" instead. * Property "msi" is gone. The new device can't have MSI-X capability. It can't interrupt anyway. * Properties "ioeventfd" and "vectors" are gone. They're meaningless without interrupts anyway. Changes from ivshmem to ivshmem-doorbell: * Property "msi" is gone. The new device always has MSI-X capability. * Property "ioeventfd" defaults to on instead of off. * Property "size" is gone. The new device can only map all the shared memory received from the server. Guests can easily find out whether the device is configured for interrupts by checking for MSI-X capability. Note: some code added in sub-optimal places to make the diff easier to review. The next commit will move it to more sensible places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-37-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Replace int role_val by OnOffAuto masterMarkus Armbruster
In preparation of making it a qdev property. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-36-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Inline check_shm_size() into its only callerMarkus Armbruster
Improve the error messages while there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1458066895-20632-34-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-03-21ivshmem: Simplify memory regions for BAR 2 (shared memory)Markus Armbruster
ivshmem_realize() puts the shared memory region in a container region. Used to be necessary to permit delayed mapping of the shared memory. However, we recently moved to synchronous mapping, in "ivshmem: Receive shared memory synchronously in realize()" and the commit following it. The container is redundant since then. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-33-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Implement shm=... with a memory backendMarkus Armbruster
ivshmem has its very own code to create and map shared memory. Replace that with an implicitly created memory backend. Reduces the number of ways we create BAR 2 from three to two. The memory-backend-file is currently available only with CONFIG_LINUX, so this adds a second Linuxism to ivshmem (the other one is eventfd). Should we ever need to make it portable to systems where memory-backend-file can't be made to serve, we could create a memory-backend-shmem that allocates memory with shm_open(). Bonus fix: shared memory files are now created with permissions 0655 instead of 0777. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-32-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Tighten check of property "size"Markus Armbruster
If size_t is narrower than 64 bits, passing uint64_t ivshmem_size to mmap() truncates. Reject such sizes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-31-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Simplify how we cope with short reads from serverMarkus Armbruster
Short reads from a UNIX domain sockets are exceedingly unlikely when the other side always sends eight bytes and we always read eight bytes. We cope with them anyway. However, the code doing that is rather convoluted. Dumb it down radically. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-30-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Drop the hackish test for UNIX domain chardevMarkus Armbruster
The chardev must be capable of transmitting SCM_RIGHTS ancillary messages. We check it by comparing CharDriverState member filename to "unix:". That's almost as brittle as it is disgusting. When the actual transmission all happened asynchronously, this check was all we could do in realize(), and thus better than nothing. But now we receive at least one SCM_RIGHTS synchronously in realize(), it's not worth its keep anymore. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-29-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Rely on server sending the ID right after the versionMarkus Armbruster
The protocol specification (ivshmem-spec.txt, formerly ivshmem_device_spec.txt) has always required the ID message to be sent right at the beginning, and ivshmem-server has always complied. The device, however, accepts it out of order. If an interrupt setup arrived before it, though, it would be misinterpreted as connect notification. Fix the latent bug by relying on the spec and ivshmem-server's actual behavior. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-28-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Propagate errors through ivshmem_recv_setup()Markus Armbruster
This kills off the funny state described in the previous commit. Simplify ivshmem_io_read() accordingly, and update documentation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1458066895-20632-27-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-03-21ivshmem: Receive shared memory synchronously in realize()Markus Armbruster
When configured for interrupts (property "chardev" given), we receive the shared memory from an ivshmem server. We do so asynchronously after realize() completes, by setting up callbacks with qemu_chr_add_handlers(). Keeping server I/O out of realize() that way avoids delays due to a slow server. This is probably relevant only for hot plug. However, this funny "no shared memory, yet" state of the device also causes a raft of issues that are hard or impossible to work around: * The guest is exposed to this state: when we enter and leave it its shared memory contents is apruptly replaced, and device register IVPosition changes. This is a known issue. We document that guests should not access the shared memory after device initialization until the IVPosition register becomes non-negative. For cold plug, the funny state is unlikely to be visible in practice, because we normally receive the shared memory long before the guest gets around to mess with the device. For hot plug, the timing is tighter, but the relative slowness of PCI device configuration has a good chance to hide the funny state. In either case, guests complying with the documented procedure are safe. * Migration becomes racy. If migration completes before the shared memory setup completes on the source, shared memory contents is silently lost. Fortunately, migration is rather unlikely to win this race. If the shared memory's ramblock arrives at the destination before shared memory setup completes, migration fails. There is no known way for a management application to wait for shared memory setup to complete. All you can do is retry failed migration. You can improve your chances by leaving more time between running the destination QEMU and the migrate command. To mitigate silent memory loss, you need to ensure the server initializes shared memory exactly the same on source and destination. These issues are entirely undocumented so far. I'd expect the server to be almost always fast enough to hide these issues. But then rare catastrophic races are in a way the worst kind. This is way more trouble than I'm willing to take from any device. Kill the funny state by receiving shared memory synchronously in realize(). If your hot plug hangs, go kill your ivshmem server. For easier review, this commit only makes the receive synchronous, it doesn't add the necessary error propagation. Without that, the funny state persists. The next commit will do that, and kill it off for real. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-26-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Plug leaks on unplug, fix peer disconnectMarkus Armbruster
close_peer_eventfds() cleans up three things: ioeventfd triggers if they exist, eventfds, and the array to store them. Commit 98609cd (v1.2.0) fixed it not to clean up ioeventfd triggers when they don't exist (property ioeventfd=off, which is the default). Unfortunately, the fix also made it skip cleanup of the eventfds and the array then. This is a memory and file descriptor leak on unplug. Additionally, the reset of nb_eventfds is skipped. Doesn't matter on unplug. On peer disconnect, however, this permanently wedges the interrupt vectors used for that peer's ID. The eventfds stay behind, but aren't connected to a peer anymore. When the ID gets recycled for a new peer, the new peer's eventfds get assigned to vectors after the old ones. Commonly, the device's number of vectors matches the server's, so the new ones get dropped with a "Too many eventfd received" message. Interrupts either don't work (common case) or go to the wrong vector. Fix by narrowing the conditional to just the ioeventfd trigger cleanup. While there, move the "invalid" peer check to the only caller where it can actually happen, and tighten it to reject own ID. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-25-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Disentangle ivshmem_read()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-24-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Simplify rejection of invalid peer ID from serverMarkus Armbruster
ivshmem_read() processes server messages. These are 64 bit signed integers. -1 is shared memory setup, 16 bit unsigned is a peer ID, anything else is invalid. ivshmem_read() rejects invalid negative messages right away, silently. Invalid positive messages get rejected only in resize_peers(), and ivshmem_read() then prints the rather cryptic message "failed to resize peers array". Extend the first check to cover all invalid messages, make it report "server sent invalid message", and drop the second check. Now resize_peers() can't fail anymore; simplify. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-23-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Assert interrupts are set up onceMarkus Armbruster
An interrupt is set up when the interrupt's file descriptor is received. Each message applies to the next interrupt vector. Therefore, each vector cannot be set up more than once. ivshmem_add_kvm_msi_virq() half-heartedly tries not to rely on this by doing nothing then, but that's not going to recover from this error should it become possible in the future. watch_vector_notifier() doesn't even try. Simply assert what is the case, so we get alerted if we ever screw it up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-22-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Leave INTx alone when using MSI-XMarkus Armbruster
The ivshmem device can either use MSI-X or legacy INTx for interrupts. With MSI-X enabled, peer interrupt events trigger an MSI as they should. But software can still raise INTx via interrupt status and mask register in BAR 0. This is explicitly prohibited by PCI Local Bus Specification Revision 3.0, section 6.8.3.3: While enabled for MSI or MSI-X operation, a function is prohibited from using its INTx# pin (if implemented) to request service (MSI, MSI-X, and INTx# are mutually exclusive). Fix the device model to leave INTx alone when using MSI-X. Document that we claim to use INTx in config space even when we don't. Unlike other devices, ivshmem does *not* use INTx when configured for MSI-X and MSI-X isn't enabled by software. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1458066895-20632-21-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Clean up MSI-X conditionsMarkus Armbruster
There are three predicates related to MSI-X: * ivshmem_has_feature(s, IVSHMEM_MSI) is true unless the non-MSI-X variant of the device is selected with msi=off. * msix_present() is true when the device has the PCI capability MSI-X. It's initially false, and becomes true during successful realize of the MSI-X variant of the device. Thus, it's the same as ivshmem_has_feature(s, IVSHMEM_MSI) for realized devices. * msix_enabled() is true when msix_present() is true and guest software has enabled MSI-X. Code that differs between the non-MSI-X and the MSI-X variant of the device needs to be guarded by ivshmem_has_feature(s, IVSHMEM_MSI) or by msix_present(), except the latter works only for realized devices. Code that depends on whether MSI-X is in use needs to be guarded with msix_enabled(). Code review led me to two minor messes: * ivshmem_vector_notify() calls msix_notify() even when !msix_enabled(), unlike most other MSI-X-capable devices. As far as I can tell, msix_notify() does nothing when !msix_enabled(). Add the guard anyway. * Most callers of ivshmem_use_msix() guard it with ivshmem_has_feature(s, IVSHMEM_MSI). Not necessary, because ivshmem_use_msix() does nothing when !msix_present(). That's ivshmem's only use of msix_present(), though. Guard it consistently, and drop the now redundant msix_present() check. While there, rename ivshmem_use_msix() to ivshmem_msix_vector_use(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1458066895-20632-20-git-send-email-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2016-03-21ivshmem: Clean up register callbacksMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-19-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Failed realize() can leave migration blocker behindMarkus Armbruster
If pci_ivshmem_realize() fails after it created its migration blocker, the blocker is left in place. Fix that by creating it last. Likewise, if it fails after it called fifo8_create(), it leaks fifo memory. Fix that the same way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-18-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Fix harmless misuse of ErrorMarkus Armbruster
We reuse errp after passing it host_memory_backend_get_memory(). If both host_memory_backend_get_memory() and the reuse set an error, the reuse will fail the assertion in error_setv(). Fortunately, host_memory_backend_get_memory() can't fail. Pass it &error_abort to make our assumption explicit, and to get the assertion failure in the right place should it become invalid. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-17-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Don't destroy the chardev on version mismatchMarkus Armbruster
Yes, the chardev is commonly useless after we read a bad version from it, but destroying it is inappropriate anyway: the user created it, so the user should be able to hold on to it as long as he likes. We don't destroy it on other errors. Screwed up in commit 5105b1d. Stop reading instead. Also note QEMU's behavior in ivshmem-spec.txt. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-16-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Drop ivshmem_event() stubMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-15-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Clean up after commit 9940c32Markus Armbruster
IVShmemState member eventfd_chr is useless since commit 9940c32. Drop it. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-14-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Compile debug prints unconditionally to prevent bit-rotMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-13-git-send-email-armbru@redhat.com>
2016-03-21ivshmem: Add missing newlines to debug printfsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1458066895-20632-12-git-send-email-armbru@redhat.com>
2016-03-16bcm2835_property: implement framebuffer control/configuration propertiesGrégory ESTRADE
The property channel driver now interfaces with the framebuffer device to query and set framebuffer parameters. As a result of this, the "get ARM RAM size" query now correctly returns the video RAM base address (not total RAM size), and the ram-size property is no longer relevant here. Signed-off-by: Grégory ESTRADE <gregory.estrade@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1457467526-8840-5-git-send-email-Andrew.Baumann@microsoft.com [AB: cleanup/refactoring for upstream submission] Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Add i.MX6 CCM and ANALOG device.Jean-Christophe Dubois
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9fa80b4d8c5d0f50c94e77d74f952a7a665e168f.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Add the CLK_IPG_HIGH clockJean-Christophe Dubois
EPIT, GPT and other i.MX timers are using "abstract" clocks among which a CLK_IPG_HIGH clock. On i.MX25 and i.MX31 CLK_IPG and CLK_IPG_HIGH are mapped to the same clock but on other SOC like i.MX6 they are mapped to distinct clocks. This patch add the CLK_IPG_HIGH to prepare for SOC where these 2 clocks are different. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 224bf650194760284cb40630e985867e1373276a.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-16i.MX: Remove CCM useless clock computation handling.Jean-Christophe Dubois
Most clocks supported by the CCM are useless to the qemu framework. Only clocks related to timers (EPIT, GPT, PWM, WATCHDOG, ...) are usefull to QEMU code. Therefore this patch removes clock computation handling for all clocks but: * CLK_NONE, * CLK_IPG, * CLK_32k Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9e7222efb349801032e60c0f6b0fbad0e5dcf648.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 19:21:21 +0000