aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)Author
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16mac_via: remove VIA1 timer optimisationsMark Cave-Ayland
The original implementation of the Macintosh VIA devices in commit 6dca62a000 "hw/m68k: add VIA support" used timer optimisations to reduce high CPU usage on the host when booting Linux. These optimisations worked by waiting until VIA1 port B was accessed before re-arming the timers. The MacOS toolbox ROM constantly writes to VIA1 port B which calls via1_one_second_update() and via1_sixty_hz_update() to calculate the new expiry time, causing the timers to constantly reset and never fire. The effect of this is that the Ticks (0x16a) global variable holding the number of 60Hz timer ticks since reset is never incremented by the interrupt causing time to stand still. Whilst the code was introduced as a performance optimisation, it is likely that the high CPU usage was actually caused by the incorrect 60Hz timer interval fixed in the previous patch. Remove the optimisation to keep everything simple and enable the MacOS toolbox ROM to start keeping time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-8-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: fix 60Hz VIA1 timer intervalMark Cave-Ayland
The 60Hz timer is initialised using timer_new_ns() meaning that the timer interval should be measured in ns, and therefore its period is a thousand times too short. Use a define for the 60Hz timer period taking the more precise value as documented in the Guide To The Macintosh Family Hardware. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: rename VBL timer to 60Hz timerMark Cave-Ayland
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer on newer Macs such as the Quadra only exists for compatibility with old software and is no longer synced to the VBL interval. Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in future. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: don't re-inject ADB response when switching to IDLE stateMark Cave-Ayland
The current workaround for the Linux ADB state machine in kernels < 5.6 switching the VIA back to IDLE state between send and receive modes is to re-inject the first byte of the response in the IDLE state, and then force the state machine into generating an autopoll reply. In fact what is happening is much simpler: analysis of traces from a real Quadra suggest that the existing data is returned as the first autopoll response rather than generating an immediate response starting whilst still in IDLE state. Update the ADB receive code to work in the same way, which allows the re-injection code to be completely removed from adb_via_receive() and for adb_via_poll() to be simplified accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210311100505.22596-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: allow long accesses to VIA registersMark Cave-Ayland
The MacOS SCSI driver uses a long access to read the VIA registers rather than just a single byte during the message out phase. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: fix up adb_via_receive() trace eventsMark Cave-Ayland
The use of the post-increment operator on adb_data_in_index meant that the trace-event was accidentally displaying the next byte in the incoming ADB data buffer rather than the current byte. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: switch rtc pram trace-events to use hex rather than decimal for ↵Mark Cave-Ayland
addresses Since all the documentation uses the hex offsets, this makes it much easier to see what is going on. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-15m68k: add a system controllerLaurent Vivier
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-15hw/misc/led: Add yellow LEDPhilippe Mathieu-Daudé
Add the yellow "lime" LED. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael Rolnik <mrolnik@gmail.com> Message-Id: <20210313165445.2113938-2-f4bug@amsat.org>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: versal: Add a model of the XRAM controllerEdgar E. Iglesias
Add a model of the Xilinx Versal Accelerator RAM (XRAM). This is mainly a stub to make firmware happy. The size of the RAMs can be probed. The interrupt mask logic is modelled but none of the interrups will ever be raised unless injected. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09Various spelling fixesMichael Tokarev
An assorted set of spelling fixes in various places. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09hw/misc: Model KCS devices in the Aspeed LPC controllerAndrew Jeffery
Keyboard-Controller-Style devices for IPMI purposes are exposed via LPC IO cycles from the BMC to the host. Expose support on the BMC side by implementing the usual MMIO behaviours, and expose the ability to inspect the KCS registers in "host" style by accessing QOM properties associated with each register. The model caters to the IRQ style of both the AST2600 and the earlier SoCs (AST2400 and AST2500). The AST2600 allocates an IRQ for each LPC sub-device, while there is a single IRQ shared across all subdevices on the AST2400 and AST2500. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210302014317.915120-6-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09hw/misc: Add a basic Aspeed LPC controller modelCédric Le Goater
This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-09qtest: delete superfluous inclusions of qtest.hChen Qun
There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-08hw/misc/mps2-scc: Implement changes for AN547Peter Maydell
Implement the minor changes required to the SCC block for AN547 images: * CFG2 and CFG5 exist (like AN524) * CFG3 is reserved (like AN524) * CFG0 bit 1 is CPU_WAIT; we don't implement it, but note this in the TODO comment Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-40-peter.maydell@linaro.org
2021-03-08hw/misc/mps2-fpgaio: Support AN547 DBGCTRL registerPeter Maydell
For the AN547 image, the FPGAIO block has an extra DBGCTRL register, which is used to control the SPNIDEN, SPIDEN, NPIDEN and DBGEN inputs to the CPU. These signals control when the CPU permits use of the external debug interface. Our CPU models don't implement the external debug interface, so we model the register as reads-as-written. Implement the register, with a property defining whether it is present, and allow mps2-tz boards to specify that it is present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-39-peter.maydell@linaro.org
2021-03-08hw/misc/mps2-fpgaio: Fold counters subsection into main vmstatePeter Maydell
We've already broken migration compatibility for all the MPS boards, so we might as well take advantage of this to simplify the vmstate for the FPGAIO device by folding the counters subsection into the main vmstate description. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-38-peter.maydell@linaro.org
2021-03-08hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register blockPeter Maydell
The SSE-300 has a new register block CPU<N>_PWRCTRL. There is one instance of this per CPU in the system (so just one for the SSE-300), and as well as the usual CIDR/PIDR ID registers it has just one register, CPUPWRCFG. This register allows the guest to configure behaviour of the system in power-down and deep-sleep states. Since QEMU does not model those, we make the register a dummy reads-as-written implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-21-peter.maydell@linaro.org
2021-03-08hw/arm/Kconfig: Move ARMSSE_CPUID and ARMSSE_MHU stanzas to hw/miscPeter Maydell
The ARMSSE_CPUID and ARMSSE_MHU Kconfig stanzas are for the devices implemented by hw/misc/cpuid.c and hw/misc/armsse-mhu.c. Move them to hw/misc/Kconfig where they belong. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-20-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Implement SSE-200 and SSE-300 PID register valuesPeter Maydell
The SSE-200 and SSE-300 have different PID register values from the IoTKit for the sysctl register block. We incorrectly implemented the SSE-200 with the same PID values as IoTKit. Fix the SSE-200 bug and report these register values for SSE-300. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-19-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Handle SSE-300 changes to PDCM_PD_*_SENSE registersPeter Maydell
The sysctl PDCM_PD_*_SENSE registers control various power domains in the system and allow the guest to configure which conditions keep a power domain awake and what power state to use when the domain is in a low power state. QEMU doesn't model power domains, so for us these registers are dummy reads-as-written implementations. The SSE-300 has a different power domain setup, so the set of registers is slightly different: Offset SSE-200 SSE-300 --------------------------------------------------- 0x200 PDCM_PD_SYS_SENSE PDCM_PD_SYS_SENSE 0x204 reserved PDCM_PD_CPU0_SENSE 0x208 reserved reserved 0x20c PDCM_PD_SRAM0_SENSE reserved 0x210 PDCM_PD_SRAM1_SENSE reserved 0x214 PDCM_PD_SRAM2_SENSE PDCM_PD_VMR0_SENSE 0x218 PDCM_PD_SRAM3_SENSE PDCM_PD_VMR1_SENSE Offsets 0x200 and 0x208 are the same for both, so handled in a previous commit; here we deal with 0x204, 0x20c, 0x210, 0x214, 0x218. (We can safely add new lines to the SSE300 vmstate because no board uses this device in an SSE300 yet.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-18-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Implement dummy version of SSE-300 PWRCTRL registerPeter Maydell
The SSE-300 has a new PWRCTRL register at offset 0x1fc (previously reserved). This register controls accessibility of some registers in the Power Policy Units (PPUs). Since QEMU doesn't implement the PPUs, we don't need to implement any real behaviour for this register, so we just handle the UNLOCK bit which controls whether writes to the register itself are permitted and otherwise make it be reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-17-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Handle INITSVTOR* for SSE-300Peter Maydell
The SSE-300 has only one CPU and so no INITSVTOR1. It does have INITSVTOR0, but unlike the SSE-200 this register now has a LOCK bit which can be set to 1 to prevent any further writes to the register. Implement these differences. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-16-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Handle CPU_WAIT, NMI_ENABLE for SSE-300Peter Maydell
In the SSE-300 the CPU_WAIT and NMI_ENABLE registers have moved offsets, so they are now where the SSE-200's WICCTRL and EWCTRL were. The SSE-300 does not have WICCTLR or EWCTRL at all, and the old offsets are reserved: Offset SSE-200 SSE-300 ----------------------------------- 0x118 CPUWAIT reserved 0x118 NMI_ENABLE reserved 0x120 WICCTRL CPUWAIT 0x124 EWCTRL NMI_ENABLE Handle this reshuffle, and the fact that SSE-300 has only one CPU and so only one active bit in CPUWAIT. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-15-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Add SSE-300 cases which match SSE-200 behaviourPeter Maydell
The SSE-300's iokit-sysctl device is similar to the SSE-200, but some registers have moved address or have different behaviours. In this commit we add case statements for the registers where the SSE-300 and SSE-200 have the same behaviour. Some registers are the same on all SSE versions and so need no code change at all. Putting both of these categories together covers: 0x0 SECDBGSTAT 0x4 SECDBGSET 0x8 SECDBGCLR 0xc SCSECCTRL 0x10 CLK_CFG0 -- this is like SSE-200 FCLK_DIV but with a different set of clocks being controlled; our implementation is a dummy reads-as-written anyway 0x14 CLK_CFG1 -- similar to SSE-200 SYSCLK_DIV; our implementation is a dummy 0x18 CLK_FORCE -- similar to SSE-200 but different bit allocations; we have a dummy implementation 0x100 RESET_SYNDROME -- bit allocation differs from SSE-200 but our implementation is a dummy 0x104 RESET_MASK -- bit allocation differs from SSE-200 but our implementation is a dummy 0x108 SWRESET 0x10c GRETREG 0x200 PDCM_PD_SYS_SENSE -- some bit allocations differ, but our implementation is a dummy We also need to migrate the state of these registers which are shared between the SSE-200 and SSE-300, so update the vmstate 'needed' function to do this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-14-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysinfo.c: Implement SYS_CONFIG1 and IIDRPeter Maydell
For SSE-300, the SYSINFO register block has two new registers: * SYS_CONFIG1 indicates the config for a potential CPU2 and CPU3; since the SSE-300 can only be configured with a single CPU it is always zero * IIDR is the subsystem implementation identity register; its value is set by the SoC integrator, so we plumb this in from the armsse.c code as we do with SYS_VERSION and SYS_CONFIG Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-11-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysinfo.c: Implement SSE-300 PID register valuesPeter Maydell
The version of the SYSINFO Register Block in the SSE-300 has different CIDR/PIDR register values to the SSE-200; pass in the sse-version property and use it to select the correct ID register values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-9-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-secctl.c: Implement SSE-300 PID register valuesPeter Maydell
The versions of the Secure Access Configuration Register Block and Non-secure Access Configuration Register Block in the SSE-300 are the same as those in the SSE-200, but the CIDR/PIDR ID register values are different. Plumb through the sse-version property and use it to select the correct ID register values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-8-peter.maydell@linaro.org
2021-03-08hw/misc/iotkit-sysctl: Remove is_sse200 flagPeter Maydell
Remove the is_sse200 flag in favour of just directly testing the new sse_version field. Since some of these registers exist in the SSE-300 but some do not or have different behaviour, we expand out the if() statements in the read and write functions into switch()es, so we have an easy place to put SSE-300 specific behaviour. (Until we do add the SSE-300 behaviour, the thing preventing us reaching the "unreachable" default cases is that armsse.c doesn't yet pass us an ARMSSE_SSE300 version.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-7-peter.maydell@linaro.org
2021-03-08hw/arm/armsse: Introduce SSE subsystem version propertyPeter Maydell
We model Arm "Subsystems for Embedded" SoC subsystems using generic code which is split into various sub-devices which are configurable by QOM properties to handle the behaviour differences between the SSE subsystems we implement. Currently the only sub-device which needs to change is the IOTKIT_SYSCTL device, and we do this with a mix of properties that directly specify divergent behaviours (eg CPUWAIT_RST) and passing it the SYS_VERSION register value as a way for it to distinguish IoTKit from SSE-200. The "pass SYS_VERSION" approach is already a bit hacky, since the IOTKIT_SYSCTL device has to know that the different part of the register value happens to be bits [31:28]. For SSE-300 this register is renamed SOC_IDENTITY and has a different format entirely, all of whose fields can be configured by the SoC integrator when they integrate the SSE into their SoC, and so "pass SYS_VERSION" breaks down completely. Switch to using a simple integer property representing an internal-to-QEMU enumeration of the SSE flavour. For the moment we only need this in IOTKIT_SYSCTL, but as we add SSE-300 support a few of the other devices will also need to know. We define and permit a value for the SSE-300 so we can start using it in subsequent commits which add SSE-300 support. The now-redundant is_sse200 flag in IoTKitSysCtl will be removed in the following commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-6-peter.maydell@linaro.org
2021-03-08clock: Add ClockEvent parameter to callbacksPeter Maydell
The Clock framework allows users to specify a callback which is called after the clock's period has been updated. Some users need to also have a callback which is called before the clock period is updated. As the first step in adding support for notifying Clock users on pre-update events, add an argument to the ClockCallback to specify what event is being notified, and add an argument to the various functions for registering a callback to specify which events are of interest to that callback. Note that the documentation update renders correct the previously incorrect claim in 'Adding a new clock' that callbacks "will be explained in a following section". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
2021-03-08hw/arm/mps2: Update old infocenter.arm.com URLsPeter Maydell
Update old infocenter.arm.com URLs to the equivalent developer.arm.com ones (the old URLs should redirect, but we might as well avoid the redirection notice, and the new URLs are pleasantly shorter). This commit covers the links to the MPS2 board TRM, the various Application Notes, the IoTKit and SSE-200 documents. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-25-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524Peter Maydell
The AN524 version of the SCC interface has different behaviour for some of the CFG registers; implement it. Each board in this family can have minor differences in the meaning of the CFG registers, so rather than trying to specify all the possible semantics via individual device properties, we make the behaviour conditional on the part-number field of the SCC_ID register which the board code already passes us. For the AN524, the differences are: * CFG3 is reserved rather than being board switches * CFG5 is a new register ("ACLK Frequency in Hz") * CFG6 is a new register ("Clock divider for BRAM") We implement both of the new registers as reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-11-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-fpgaio: Support SWITCH registerPeter Maydell
MPS3 boards have an extra SWITCH register in the FPGAIO block which reports the value of some switches. Implement this, governed by a property the board code can use to specify whether whether it exists. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-7-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-fpgaio: Make number of LEDs configurable by boardPeter Maydell
The MPS2 board has 2 LEDs, but the MPS3 board has 10 LEDs. The FPGAIO device is similar on both sets of boards, but the LED0 register has correspondingly more bits that have an effect. Add a device property for number of LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-6-peter.maydell@linaro.org
2021-03-06hw/misc/mps2-scc: Support configurable number of OSCCLK valuesPeter Maydell
Currently the MPS2 SCC device implements a fixed number of OSCCLK values (3). The variant of this device in the MPS3 AN524 board has 6 OSCCLK values. Switch to using a PROP_ARRAY, which allows board code to specify how large the OSCCLK array should be as well as its values. With a variable-length property array, the SCC no longer specifies default values for the OSCCLKs, so we must set them explicitly in the board code. This defaults are actually incorrect for the an521 and an505; we will correct this bug in a following patch. This is a migration compatibility break for all the mps boards. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210215115138.20465-3-peter.maydell@linaro.org
2021-03-04hw/misc: sifive_u_otp: Use error_report() when block operation failsBin Meng
At present when blk_pread() / blk_pwrite() fails, a guest error is logged, but this is not really a guest error. Change to use error_report() instead. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1611026585-29971-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-02-20Fix SPDX-License-Identifier typosRyan Finnie
Several SPDX headers contain "SPDX-License-Identifer" (note the missing "i" before "er"); fix these typos. Signed-off-by: Ryan Finnie <ryan@finnie.org> Cc: qemu-trivial@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210201200147.211914-1-ryan@finnie.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-11arm: Update infocenter.arm.com URLsPeter Maydell
Update infocenter.arm.com URLs for various pieces of Arm documentation to the new developer.arm.com equivalents. (There is a redirection in place from the old URLs, but we might as well update our comments in case the redirect ever disappears in future.) This patch covers all the URLs which are not MPS2/SSE-200/IoTKit related (those are dealt with in a different patch). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-02-09memory: alloc RAM from file at offsetJagannathan Raman
Allow RAM MemoryRegion to be created from an offset in a file, instead of allocating at offset of 0 by default. This is needed to synchronize RAM between QEMU & remote process. Signed-off-by: Jagannathan Raman <jag.raman@oracle.com> Signed-off-by: John G Johnson <john.g.johnson@oracle.com> Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 609996697ad8617e3b01df38accc5c208c24d74e.1611938319.git.jag.raman@oracle.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-02-08imx7-ccm: add digprog mmio write methodPrasad J Pandit
Add digprog mmio write method to avoid assert failure during initialisation. Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-Id: <20200811114133.672647-9-ppandit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-08tz-ppc: add dummy read/write methodsPrasad J Pandit
Add tz-ppc-dummy mmio read/write methods to avoid assert failure during initialisation. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200811114133.672647-8-ppandit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 05:59:35 +0000