aboutsummaryrefslogtreecommitdiff
path: root/hw/misc/Makefile.objs
AgeCommit message (Collapse)Author
2019-05-17leon3: introduce the plug and play mechanismKONRAD Frederic
This adds the AHB and APB plug and play devices. They are scanned during the linux boot to discover the various peripheral. Reviewed-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-02-28hw/misc/armsse-mhu.c: Model the SSE-200 Message Handling UnitPeter Maydell
Implement a model of the Message Handling Unit (MHU) found in the Arm SSE-200. This is a simple device which just contains some registers which allow the two cores of the SSE-200 to raise interrupts on each other. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190219125808.25174-2-peter.maydell@linaro.org
2019-02-01hw/misc/armsse-cpuid: Implement SSE-200 CPU_IDENTITY register blockPeter Maydell
The SSE-200 has a CPU_IDENTITY register block, which is a set of read-only registers. As well as the usual PID/CID registers, there is a single CPUID register which indicates whether the CPU is CPU 0 or CPU 1. Implement a model of this register block. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
2019-01-07hw/misc/nrf51_rng: Add NRF51 random number generator peripheralSteffen Görtz
Add a model of the NRF51 random number generator peripheral. This is a simple random generator that continuously generates new random values after startup. Reference Manual: http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.pdf Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103091119.9367-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19hyperv: factor out arch-independent API into hw/hypervRoman Kagan
A significant part of hyperv.c is not actually tied to x86, and can be moved to hw/. This will allow to maintain most of Hyper-V and VMBus target-independent, and to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Also this stuff can now be opt-out with CONFIG_HYPERV. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-24hw/misc/tz-msc: Model TrustZone Master Security ControllerPeter Maydell
Implement a model of the TrustZone Master Securtiy Controller, as documented in the Arm CoreLink SIE-200 System IP for Embedded TRM (DDI0571G): https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g The MSC is intended to sit in front of a device which can be a bus master (eg a DMA controller) and programmably gate its transactions. This allows a bus-mastering device to be controlled by non-secure code but still restricted from making accesses to addresses which are secure-only. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180820141116.9118-12-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-08-24hw/misc/iotkit-sysinfo: Implement IoTKit system information blockPeter Maydell
Implement the IoTKit system control element's system information block; this is just a pair of read-only version/config registers, plus the usual PID/CID ID registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-10-peter.maydell@linaro.org
2018-08-24hw/misc/iotkit-sysctl: Implement IoTKit system control elementPeter Maydell
The Arm IoTKit includes a system control element which provides a block of read-only ID registers and a block of read-write control registers. Implement a minimal version of this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180820141116.9118-9-peter.maydell@linaro.org
2018-08-20hw/misc: Remove mmio_interface devicePeter Maydell
The mmio_interface device was a purely internal artifact of the implementation of the memory subsystem's request_ptr APIs. Now that we have removed those APIs, we can remove the mmio_interface device too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Message-id: 20180817114619.22354-4-peter.maydell@linaro.org
2018-08-16i.MX6UL: Add i.MX6UL specific CCM deviceJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 34b6704ceb81b49e35ce1ad162bf758e5141ff87.1532984236.git.jcd@tribudubois.net [PMM: fixed some comment typos etc] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-22hw/misc/tz-mpc.c: Implement the Arm TrustZone Memory Protection ControllerPeter Maydell
Implement the Arm TrustZone Memory Protection Controller, which sits in front of RAM and allows secure software to configure it to either pass through or reject transactions. We implement the MPC as a QEMU IOMMU, which will direct transactions either through to the devices and memory behind it or to a special "never works" AddressSpace if they are blocked. This initial commit implements the skeleton of the device: * it always permits accesses * it doesn't implement most of the registers * it doesn't implement the interrupt or other behaviour for blocked transactions Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20180620132032.28865-2-peter.maydell@linaro.org
2018-06-08misc: add pca9552 LED blinker modelCédric Le Goater
Specs are available here : https://www.nxp.com/docs/en/application-note/AN264.pdf This is a simple model supporting the basic registers for led and GPIO mode. The device also supports two blinking rates but not the model yet. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-02hw/misc/iotkit-secctl: Arm IoT Kit security controller initial skeletonPeter Maydell
The Arm IoT Kit includes a "security controller" which is largely a collection of registers for controlling the PPCs and other bits of glue in the system. This commit provides the initial skeleton of the device, implementing just the ID registers, and a couple of read-only read-as-zero registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-16-peter.maydell@linaro.org
2018-03-02hw/misc/tz-ppc: Model TrustZone peripheral protection controllerPeter Maydell
Add a model of the TrustZone peripheral protection controller (PPC), which is used to gate transactions to non-TZ-aware peripherals so that secure software can configure them to not be accessible to non-secure software. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-15-peter.maydell@linaro.org
2018-03-02hw/misc/mps2-fpgaio: FPGA control block for MPS2 AN505Peter Maydell
The MPS2 AN505 FPGA image includes a "FPGA control block" which is a small set of registers handling LEDs, buttons and some counters. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180220180325.29818-14-peter.maydell@linaro.org
2018-02-11misc: introduce new mos6522 VIA device and enable it for ppc buildsMark Cave-Ayland
The MOS6522 VIA forms the bridge part of several Mac devices, including the Mac via-cuda and via-pmu devices. Introduce a standard mos6522 device that can be shared amongst multiple implementations. This is effectively taking the 6522 parts out of cuda.c and turning them into a separate device whilst also applying some style tidy-ups and including a conversion to trace-events. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-09i.MX: Add implementation of i.MX7 GPR IP blockAndrey Smirnov
Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09i.MX: Add code to emulate i.MX7 SNVS IP-blockAndrey Smirnov
Add code to emulate SNVS IP-block. Currently only the bits needed to be able to emulate machine shutdown are implemented. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09i.MX: Add code to emulate i.MX2 watchdog IP blockAndrey Smirnov
Add enough code to emulate i.MX2 watchdog IP block so it would be possible to reboot the machine running Linux Guest. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09i.MX: Add code to emulate i.MX7 CCM, PMU and ANALOG IP blocksAndrey Smirnov
Add minimal code needed to allow upstream Linux guest to boot. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-18i386/pc: move vmport.c to hw/i386/Philippe Mathieu-Daudé
It's a x86-only device, so it does not make sense to keep it in the shared misc folder. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-11-16build-sys: restrict vmcoreinfo to fw_cfg+dma capable targetsMarc-André Lureau
vmcoreinfo is built for all targets. However, it requires fw_cfg with DMA operations support (write operation). Restrict vmcoreinfo exposure to architectures that are supporting FW_CFG_DMA, that is arm-virt and x86 only atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15hw/misc: add vmcoreinfo deviceMarc-André Lureau
See docs/specs/vmcoreinfo.txt for details. "etc/vmcoreinfo" fw_cfg entry is added when using "-device vmcoreinfo". Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-21msf2: Microsemi Smartfusion2 System Register blockSubbaraya Sundeep
Added Sytem register block of Smartfusion2. This block has PLL registers which are accessed by guest. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-20configure: Rename CONFIG_IVSHMEM to CONFIG_IVSHMEM_DEVICEPeter Maydell
The current CONFIG_IVSHMEM is confusing, because it looks like it's a flag for "do we have ivshmem support?", but actually it's a flag for "is the ivshmem PCI device being compiled?" (and implicitly "do we have ivshmem support?" is tested with CONFIG_EVENTFD). Rename it to CONFIG_IVSHMEM_DEVICE to clear this confusion up; shortly we will add a new CONFIG_IVSHMEM which really does indicate whether the host can support ivshmem. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1500021225-4118-2-git-send-email-peter.maydell@linaro.org
2017-07-17hw/misc/mps2_scc: Implement MPS2 Serial Communication ControllerPeter Maydell
Implement a model of the Serial Communication Controller (SCC) found in MPS2 FPGA images. The primary purpose of this device is to communicate with the Motherboard Configuration Controller (MCC) which is located on the MPS board itself, outside the FPGA image. This is used for programming the MPS clock generators. The SCC also has some basic ID registers and an output for the board LEDs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
2017-07-11hw/misc: Add Exynos4210 Pseudo Random Number GeneratorKrzysztof Kozlowski
Add emulation for Exynos4210 Pseudo Random Number Generator which could work on fixed seeds or with seeds provided by True Random Number Generator block inside the SoC. Implement only the fixed seeds part of it in polling mode (no interrupts). Emulation tested with two independent Linux kernel exynos-rng drivers: 1. New kcapi-rng interface (targeting Linux v4.12), 2. Old hwrng inteface # echo "exynos" > /sys/class/misc/hw_random/rng_current # dd if=/dev/hwrng of=/dev/null bs=1 count=16 Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20170425180609.11004-1-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: wrapped a few overlong lines; more efficient implementation of exynos4210_rng_seed_ready()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-07-04hw/misc/edu: Compile the edu device as common objectThomas Huth
edu.c does not contain any target-specific code, so we can put it into common-obj-y to compile it only once for all targets. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1498454578-18709-8-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27introduce mmio_interfaceKONRAD Frederic
This introduces mmio_interface object which contains a MemoryRegion and can be hotplugged/hotunplugged. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2017-06-13hw/misc: add a TMP42{1, 2, 3} device modelCédric Le Goater
Largely inspired by the TMP105 temperature sensor, here is a model for the TMP42{1,2,3} temperature sensors. Specs can be found here : http://www.ti.com/lit/gpn/tmp421 Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28hw/arm/exynos: Fix Linux kernel division by zero for PLLsKrzysztof Kozlowski
Without any clock controller, the Linux kernel was hitting division by zero during boot or with clk_summary: [ 0.000000] [<c031054c>] (unwind_backtrace) from [<c030ba6c>] (show_stack+0x10/0x14) [ 0.000000] [<c030ba6c>] (show_stack) from [<c05b2660>] (dump_stack+0x88/0x9c) [ 0.000000] [<c05b2660>] (dump_stack) from [<c05b11a4>] (Ldiv0+0x8/0x10) [ 0.000000] [<c05b11a4>] (Ldiv0) from [<c06ad1e0>] (samsung_pll45xx_recalc_rate+0x58/0x74) [ 0.000000] [<c06ad1e0>] (samsung_pll45xx_recalc_rate) from [<c0692ec0>] (clk_register+0x39c/0x63c) [ 0.000000] [<c0692ec0>] (clk_register) from [<c125d360>] (samsung_clk_register_pll+0x2e0/0x3d4) [ 0.000000] [<c125d360>] (samsung_clk_register_pll) from [<c125d7e8>] (exynos4_clk_init+0x1b0/0x5e4) [ 0.000000] [<c125d7e8>] (exynos4_clk_init) from [<c12335f4>] (of_clk_init+0x17c/0x210) [ 0.000000] [<c12335f4>] (of_clk_init) from [<c1204700>] (time_init+0x24/0x2c) [ 0.000000] [<c1204700>] (time_init) from [<c1200b2c>] (start_kernel+0x24c/0x38c) [ 0.000000] [<c1200b2c>] (start_kernel) from [<4020807c>] (0x4020807c) Provide stub for clock controller returning reset values for PLLs. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20170226200142.31169-1-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28target-arm: Implement BCM2835 hardware RNGMarcin Chojnacki
Recent vanilla Raspberry Pi kernels started to make use of the hardware random number generator in BCM2835 SoC. As a result, those kernels wouldn't work anymore under QEMU but rather just freeze during the boot process. This patch implements a trivial BCM2835 compatible RNG, and adds it as a peripheral to BCM2835 platform, which allows to boot a vanilla Raspberry Pi kernel under Qemu. Changes since v1: * Prevented guest from writing [31..20] bits in rng_status * Removed redundant minimum_version_id_old * Added field entries for the state * Changed realize function to reset Signed-off-by: Marcin Chojnacki <marcinch7@gmail.com> Message-id: 20170210210857.47893-1-marcinch7@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07hw/misc: New "unimplemented" sysbus devicePeter Maydell
Create a new "unimplemented" sysbus device, which simply accepts all read and write accesses, and implements them as read-as-zero, write-ignored, with logging of the access as LOG_UNIMP. This is useful for stubbing out bits of an SoC or board model which haven't been written yet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1484247815-15279-3-git-send-email-peter.maydell@linaro.org
2016-09-06ast2400: add a memory controller device modelCédric Le Goater
The uboot in the previous release of the SDK was using a hardcoded value for memory size. This is not true anymore, the value is now retrieved from the memory controller. Below is a model for this device, only supporting unlock and configuration. Without it, we endup running a guest with 64MB, which is a bit low nowdays. It uses a 'silicon-rev' property and ram_size to build a default value. Some bits should be linked to SCU strapping registers but it seems a bit complex to add for the current need. The model is ready for the AST2500 SOC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-07aux: Rename aux.[ch] to auxbus.[ch] for the benefit of WindowsPeter Maydell
On Windows 'aux.*' is a reserved name and cannot be used for filenames; see https://msdn.microsoft.com/en-gb/library/windows/desktop/aa365247(v=vs.85).aspx This prevents cloning the QEMU git repo on Windows: C:\Java\sources\kvm> git clone https://github.com/qemu/qemu.git Cloning into 'qemu'... remote: Counting objects: 279563, done. remote: Total 279563 (delta 0), reused 0 (delta 0), pack-reused 279563R Receiving objects: 100% (279563/279563), 122.45 MiB | 3.52 MiB/s, done. Resolving deltas: 100% (221942/221942), done. Checking connectivity... done. error: unable to create file hw/misc/aux.c (No such file or directory) error: unable to create file include/hw/misc/aux.h (No such file or directory) Checking out files: 100% (4795/4795), done. fatal: unable to checkout working tree warning: Clone succeeded, but checkout failed. You can inspect what was checked out with 'git status' and retry the checkout with 'git checkout -f HEAD' (bug https://bugs.launchpad.net/bugs/1595240) Rename the offending files for the benefit of Windows. Reported-by: Алексей Курган <akurgan@yandex.ru> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Wei Huang <wei@redhat.com> Tested-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1467377145-32385-1-git-send-email-peter.maydell@linaro.org
2016-06-27hw/misc: Add a model for the ASPEED System Control UnitAndrew Jeffery
The SCU is a collection of chip-level control registers that manage the various functions supported by ASPEED SoCs. Typically the bits control interactions with clocks, external hardware or reset behaviour, and we can largly take a hands-off approach to reads and writes. Firmware makes heavy use of the state to determine how to boot, but the reset values vary from SoC to SoC (eg AST2400 vs AST2500). A qdev property is exposed so that the integrating SoC model can configure the silicon revision, which in-turn selects the appropriate reset values. Further qdev properties are exposed so the board model can configure the board-dependent hardware strapping. Almost all provided AST2400 reset values are specified by the datasheet. The notable exception is SOC_SCRATCH1, where we mark the DRAM as successfully initialised to avoid unnecessary dark corners in the SoC's u-boot support. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1466744305-23163-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: drop unnecessary inttypes.h include] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce aux-busKONRAD Frederic
This introduces a new bus: aux-bus. It contains an address space for aux slaves devices and a bridge to an I2C bus for I2C through AUX transactions. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12i.MX: Add i.MX6 System Reset Controller device.Jean-Christophe DUBOIS
This controller is also present in i.MX5X devices but they are not yet emulated by QEMU. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30hw/mips: implement ITC Configuration Tags and Storage CellsLeon Alrae
Implement ITC as a single object consisting of two memory regions: 1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which are accessible by the CPU via CACHE instruction. Also adding MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will dispatch reads/writes directly. 2) storage_io: memory-mapped ITC Storage whose address space is configurable (i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers. ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the ITC cell tag indicates the type of the cell. If the ITC Storage contains both types of cells then FIFOs are located before Semaphores. Since issuing thread can get blocked on the access to a cell (in E/F Synchronized and P/V Synchronized Views) each cell has a bitmap to track which threads are currently blocked. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: add initial Cluster Power Controller supportLeon Alrae
Cluster Power Controller (CPC) is responsible for power management in multiprocessing system. It provides registers to control the power and the clock frequency of the individual elements in the system. This patch implements only three registers that are used to control the power state of each VP on a single core: * VP Run is a write-only register used to set each VP to the run state * VP Stop is a write-only register used to set each VP to the suspend state * VP Running is a read-only register indicating the run state of each VP Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: add initial Global Config Register supportYongbok Kim
Add initial GCR support to indicate number of VPs present in the system, L2 bypass mode and revision number. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: * removed GIC part, * changed commit message, * replaced %lx format spec. with PRIx64, * renamed mips_gcr.{c,h} to mips_cmgcr.{c,h}, * replaced CONFIG_MIPS_GIC with CONFIG_MIPS_CPS] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-16i.MX: Add i.MX6 CCM and ANALOG device.Jean-Christophe Dubois
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 9fa80b4d8c5d0f50c94e77d74f952a7a665e168f.1456868959.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_property: add bcm2835 property channelAndrew Baumann
This sits behind the mailbox interface, and implements request/response queries for system properties. The framebuffer-related properties will be added in a later patch. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03bcm2835_mbox: add BCM2835 mailboxesAndrew Baumann
This adds the system mailboxes which are used to communicate with a number of GPU peripherals on Pi/Pi2. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17hw/misc: Hyper-V test device 'hyperv-testdev'Andrey Smetanin
'hyperv-testdev' will be used by kvm-unit-tests to setup Hyper-V SynIC SINT's routing and to inject Hyper-V SynIC SINT's. Hyper-V test device is ISA type device that creates 0x3000 IO memory region and catches write access into it. Every write operation data decoded into ctl code and parameters for Hyper-V test device. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17i.MX: Add an i.MX25 specific CCM class/instanceJean-Christophe Dubois
With this CCM, i.MX25 timer is accurate with "real world time". Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 2c0cf90be767bfc8520661eca891ab22c61f18fe.1449528242.git.jcd@tribudubois.net Reviewed-by Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17i.MX: Split the CCM class into an abstract base class and a concrete classJean-Christophe Dubois
The IMX_CCM class is now the base abstract class that is used by EPIT and GPT timer implementation. IMX31_CCM class is the concrete class implementing CCM for i.MX31 SOC. For now the i.MX25 continues to use the i.MX31 CCM implementation. An i.MX25 specific CCM will be introduced in a later patch. We also rework initialization to stop using deprecated sysbus device init. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: fd3c7f87b50f5ebc99ec91f01413db35017f116d.1449528242.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12hw/misc: Add support for ADC controller in Xilinx Zynq 7000Guenter Roeck
Add support for the Xilinx XADC core used in Zynq 7000. References: - Zynq-7000 All Programmable SoC Technical Reference Manual - 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration multi_v7_defconfig. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [ PC changes: * Changed macro names to match TRM where possible * Made programmers model macro scheme consistent * Dropped XADC_ZYNQ_ prefix on local macros * Fix ALM field width * Update threshold-comparison interrupts in _update_ints() * factored out DFIFO pushes into helper. Renamed to "push/pop" * Changed xadc_reg to 10 bits and added OOB check. * Reduced scope of MCTL reset to just stop channel coms. * Added dummy read data to write commands * Changed _ to - seperators in string names and filenames * Dropped ------------ in header comment * Catchall'ed _update_ints() in _write handler. * Minor whitespace changes. * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE() ] Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11stm32f2xx_SYSCFG: Add the stm32f2xx SYSCFGAlistair Francis
This patch adds the stm32f2xx System Configuration Controller. This is used to configure what memory is mapped at address 0 (although that is not supported) as well as configure how the EXTI interrupts work (also not supported at the moment). This device is not required for basic examples, but more complex systems will require it (as well as the EXTI device) Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-27Give ivshmem its own config optionDavid Gibson
Currently the ivshmem device is built whenever both PCI and KVM support are included. This patch gives it its own config option to allow easier customization of whether to include it. It's enabled by default in the same circumstances as now - when both PCI and KVM are available. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425017077-18487-4-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 23:04:35 +0000