aboutsummaryrefslogtreecommitdiff
path: root/hw/mipsnet.c
AgeCommit message (Collapse)Author
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01net: Rename VLANClientState to NetClientStateStefan Hajnoczi
The vlan feature is no longer part of net core. Rename VLANClientState to NetClientState because net clients are not explicitly associated with a vlan at all, instead they have a peer net client to which they are connected. This patch is a mechanical search-and-replace except for a few whitespace fixups where changing VLANClientState to NetClientState misaligned whitespace. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2012-07-23hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)Laszlo Ersek
NET_CLIENT_TYPE_ -> NET_CLIENT_OPTIONS_KIND_ Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-11Add missing const attributes for MemoryRegionOpsStefan Weil
Most MemoryRegionOps already had the const attribute. This patch adds it to the remaining ones. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-02-15qom: Unify type registrationAndreas Färber
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: don't access name through infoAnthony Liguori
We already have a QOM interface for this so let's use it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: move qdev->info to classAnthony Liguori
Right now, DeviceInfo acts as the class for qdev. In order to switch to a proper ObjectClass derivative, we need to ween all of the callers off of interacting directly with the info pointer. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-10mipsnet: use trace frameworkHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10mipsnet: convert to qdevHervé Poussineau
Move mipsnet_init() function to mipssim machine Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23net: Consistently use qemu_macaddr_default_if_unsetJan Kiszka
Drop the open-coded MAC assignment from net_init_nic and replace it with standard qemu_macaddr_default_if_unset which is also used by qdev. That avoid creating colliding MACs when instantiating NICs via different mechanisms. This change requires to store the MAC as MACAddr in NICInfo, and the remaining nd_table users need to be updated. Based on suggestion by Peter Maydell. CC: Markus Armbruster <armbru@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-22vmstate: port mipsnetJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2010-10-03mipsnet: Fix compiler warning in debug codeStefan Weil
size_t needs a different format specifier, so fix this. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert mipsnet to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: remove NICInfo::vcMark McLoughlin
Since 1cc33683, this field is not set for most devices, so just remove it and its remaining few uses. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add receive_raw parameter to qemu_new_vlan_client()Mark McLoughlin
Trivial patch to allow supplying a receive_raw function. A future cleanup should combine this function pointer parameters into a table. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add a client type codeMark McLoughlin
This is so as to allow APIs which operate on specific client types without having to add a function table entry which is only implemented by a single client type. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15net: allow NICs to be connected to netdevsMark McLoughlin
Introduce a 'peer' member to VLANClientState as an alternative to a vlan. The idea being that packets are transfered directly from peer clients rather than going through a vlan. Patchworks-ID: 35516 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-17Remove NICInfo from e1000 and mipsnet state (Mark McLoughlin)aliguori
NICInfo isn't used after initialization, so remove it from the driver state structures. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7147 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-28Fix mipsnet device ID, noticed by Vijay Kumar.aurel32
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4119 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-28Less debug noise from the mipsnet driver.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3463 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-17Second half of mipssim support, plus documentation improvements.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3401 c046a42c-6fe2-441c-8c8c-71466251a162